1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2011-2012 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * T4240 QDS board configuration file 8 */ 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #define CONFIG_FSL_SATA_V2 13 #define CONFIG_PCIE4 14 15 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 16 17 #ifdef CONFIG_RAMBOOT_PBL 18 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg 19 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD) 20 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 21 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 22 #else 23 #define CONFIG_SPL_FLUSH_IMAGE 24 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 25 #define CONFIG_SPL_PAD_TO 0x40000 26 #define CONFIG_SPL_MAX_SIZE 0x28000 27 #define RESET_VECTOR_OFFSET 0x27FFC 28 #define BOOT_PAGE_OFFSET 0x27000 29 30 #ifdef CONFIG_NAND 31 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 32 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 33 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 34 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 35 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg 37 #define CONFIG_SPL_NAND_BOOT 38 #endif 39 40 #ifdef CONFIG_SDCARD 41 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 42 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 43 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 44 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 45 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 46 #ifndef CONFIG_SPL_BUILD 47 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 48 #endif 49 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 50 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg 51 #define CONFIG_SPL_MMC_BOOT 52 #endif 53 54 #ifdef CONFIG_SPL_BUILD 55 #define CONFIG_SPL_SKIP_RELOCATE 56 #define CONFIG_SPL_COMMON_INIT_DDR 57 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 58 #endif 59 60 #endif 61 #endif /* CONFIG_RAMBOOT_PBL */ 62 63 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 64 /* Set 1M boot space */ 65 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 66 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 67 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 68 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 69 #endif 70 71 #define CONFIG_SRIO_PCIE_BOOT_MASTER 72 #define CONFIG_DDR_ECC 73 74 #include "t4qds.h" 75 76 #if defined(CONFIG_SPIFLASH) 77 #define CONFIG_ENV_SPI_BUS 0 78 #define CONFIG_ENV_SPI_CS 0 79 #define CONFIG_ENV_SPI_MAX_HZ 10000000 80 #define CONFIG_ENV_SPI_MODE 0 81 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 82 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 83 #define CONFIG_ENV_SECT_SIZE 0x10000 84 #elif defined(CONFIG_SDCARD) 85 #define CONFIG_SYS_MMC_ENV_DEV 0 86 #define CONFIG_ENV_SIZE 0x2000 87 #define CONFIG_ENV_OFFSET (512 * 0x800) 88 #elif defined(CONFIG_NAND) 89 #define CONFIG_ENV_SIZE 0x2000 90 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 91 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 92 #define CONFIG_ENV_ADDR 0xffe20000 93 #define CONFIG_ENV_SIZE 0x2000 94 #elif defined(CONFIG_ENV_IS_NOWHERE) 95 #define CONFIG_ENV_SIZE 0x2000 96 #else 97 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 98 #define CONFIG_ENV_SIZE 0x2000 99 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 100 #endif 101 102 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 103 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 104 105 #ifndef __ASSEMBLY__ 106 unsigned long get_board_sys_clk(void); 107 unsigned long get_board_ddr_clk(void); 108 #endif 109 110 /* EEPROM */ 111 #define CONFIG_ID_EEPROM 112 #define CONFIG_SYS_I2C_EEPROM_NXID 113 #define CONFIG_SYS_EEPROM_BUS_NUM 0 114 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 116 117 /* 118 * DDR Setup 119 */ 120 #define CONFIG_SYS_SPD_BUS_NUM 0 121 #define SPD_EEPROM_ADDRESS1 0x51 122 #define SPD_EEPROM_ADDRESS2 0x52 123 #define SPD_EEPROM_ADDRESS3 0x53 124 #define SPD_EEPROM_ADDRESS4 0x54 125 #define SPD_EEPROM_ADDRESS5 0x55 126 #define SPD_EEPROM_ADDRESS6 0x56 127 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 128 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 129 130 /* 131 * IFC Definitions 132 */ 133 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 134 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 135 + 0x8000000) | \ 136 CSPR_PORT_SIZE_16 | \ 137 CSPR_MSEL_NOR | \ 138 CSPR_V) 139 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 140 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 141 CSPR_PORT_SIZE_16 | \ 142 CSPR_MSEL_NOR | \ 143 CSPR_V) 144 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 145 /* NOR Flash Timing Params */ 146 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 147 148 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 149 FTIM0_NOR_TEADC(0x5) | \ 150 FTIM0_NOR_TEAHC(0x5)) 151 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 152 FTIM1_NOR_TRAD_NOR(0x1A) |\ 153 FTIM1_NOR_TSEQRAD_NOR(0x13)) 154 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 155 FTIM2_NOR_TCH(0x4) | \ 156 FTIM2_NOR_TWPH(0x0E) | \ 157 FTIM2_NOR_TWP(0x1c)) 158 #define CONFIG_SYS_NOR_FTIM3 0x0 159 160 #define CONFIG_SYS_FLASH_QUIET_TEST 161 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 162 163 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 164 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 165 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 166 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 167 168 #define CONFIG_SYS_FLASH_EMPTY_INFO 169 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 170 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 171 172 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 173 #define QIXIS_BASE 0xffdf0000 174 #define QIXIS_LBMAP_SWITCH 6 175 #define QIXIS_LBMAP_MASK 0x0f 176 #define QIXIS_LBMAP_SHIFT 0 177 #define QIXIS_LBMAP_DFLTBANK 0x00 178 #define QIXIS_LBMAP_ALTBANK 0x04 179 #define QIXIS_RST_CTL_RESET 0x83 180 #define QIXIS_RST_FORCE_MEM 0x1 181 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 182 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 183 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 184 #define QIXIS_BRDCFG5 0x55 185 #define QIXIS_MUX_SDHC 2 186 #define QIXIS_MUX_SDHC_WIDTH8 1 187 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 188 189 #define CONFIG_SYS_CSPR3_EXT (0xf) 190 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 191 | CSPR_PORT_SIZE_8 \ 192 | CSPR_MSEL_GPCM \ 193 | CSPR_V) 194 #define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) 195 #define CONFIG_SYS_CSOR3 0x0 196 /* QIXIS Timing parameters for IFC CS3 */ 197 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 198 FTIM0_GPCM_TEADC(0x0e) | \ 199 FTIM0_GPCM_TEAHC(0x0e)) 200 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 201 FTIM1_GPCM_TRAD(0x3f)) 202 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 203 FTIM2_GPCM_TCH(0x8) | \ 204 FTIM2_GPCM_TWP(0x1f)) 205 #define CONFIG_SYS_CS3_FTIM3 0x0 206 207 /* NAND Flash on IFC */ 208 #define CONFIG_NAND_FSL_IFC 209 #define CONFIG_SYS_NAND_BASE 0xff800000 210 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 211 212 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 213 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 214 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 215 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 216 | CSPR_V) 217 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 218 219 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 220 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 221 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 222 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 223 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 224 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 225 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 226 227 #define CONFIG_SYS_NAND_ONFI_DETECTION 228 229 /* ONFI NAND Flash mode0 Timing Params */ 230 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 231 FTIM0_NAND_TWP(0x18) | \ 232 FTIM0_NAND_TWCHT(0x07) | \ 233 FTIM0_NAND_TWH(0x0a)) 234 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 235 FTIM1_NAND_TWBE(0x39) | \ 236 FTIM1_NAND_TRR(0x0e) | \ 237 FTIM1_NAND_TRP(0x18)) 238 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 239 FTIM2_NAND_TREH(0x0a) | \ 240 FTIM2_NAND_TWHRE(0x1e)) 241 #define CONFIG_SYS_NAND_FTIM3 0x0 242 243 #define CONFIG_SYS_NAND_DDR_LAW 11 244 245 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 246 #define CONFIG_SYS_MAX_NAND_DEVICE 1 247 248 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 249 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 250 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 251 252 #if defined(CONFIG_NAND) 253 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 254 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 255 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 256 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 257 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 258 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 259 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 260 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 261 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 262 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 263 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 264 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 265 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 266 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 267 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 268 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 269 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 270 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 271 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 272 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 273 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 274 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 275 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 276 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 277 #else 278 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 279 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 280 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 281 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 282 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 283 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 284 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 285 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 286 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 287 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 288 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 289 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 290 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 291 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 292 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 293 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 294 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 295 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 296 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 297 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 298 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 299 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 300 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 301 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 302 #endif 303 304 #if defined(CONFIG_RAMBOOT_PBL) 305 #define CONFIG_SYS_RAMBOOT 306 #endif 307 308 /* I2C */ 309 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 310 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 311 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 312 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 313 314 #define I2C_MUX_CH_DEFAULT 0x8 315 #define I2C_MUX_CH_VOL_MONITOR 0xa 316 #define I2C_MUX_CH_VSC3316_FS 0xc 317 #define I2C_MUX_CH_VSC3316_BS 0xd 318 319 /* Voltage monitor on channel 2*/ 320 #define I2C_VOL_MONITOR_ADDR 0x40 321 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 322 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 323 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 324 325 /* VSC Crossbar switches */ 326 #define CONFIG_VSC_CROSSBAR 327 #define VSC3316_FSM_TX_ADDR 0x70 328 #define VSC3316_FSM_RX_ADDR 0x71 329 330 /* 331 * RapidIO 332 */ 333 334 /* 335 * for slave u-boot IMAGE instored in master memory space, 336 * PHYS must be aligned based on the SIZE 337 */ 338 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 339 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 340 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 341 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 342 /* 343 * for slave UCODE and ENV instored in master memory space, 344 * PHYS must be aligned based on the SIZE 345 */ 346 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 347 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 348 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 349 350 /* slave core release by master*/ 351 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 352 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 353 354 /* 355 * SRIO_PCIE_BOOT - SLAVE 356 */ 357 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 358 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 359 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 360 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 361 #endif 362 /* 363 * eSPI - Enhanced SPI 364 */ 365 #define CONFIG_SF_DEFAULT_SPEED 10000000 366 #define CONFIG_SF_DEFAULT_MODE 0 367 368 /* Qman/Bman */ 369 #ifndef CONFIG_NOBQFMAN 370 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 371 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 372 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 373 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 374 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 375 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 376 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 377 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 378 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 379 CONFIG_SYS_BMAN_CENA_SIZE) 380 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 381 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 382 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 383 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 384 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 385 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 386 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 387 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 388 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 389 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 390 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 391 CONFIG_SYS_QMAN_CENA_SIZE) 392 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 393 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 394 395 #define CONFIG_SYS_DPAA_FMAN 396 #define CONFIG_SYS_DPAA_PME 397 #define CONFIG_SYS_PMAN 398 #define CONFIG_SYS_DPAA_DCE 399 #define CONFIG_SYS_DPAA_RMAN 400 #define CONFIG_SYS_INTERLAKEN 401 402 /* Default address of microcode for the Linux Fman driver */ 403 #if defined(CONFIG_SPIFLASH) 404 /* 405 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 406 * env, so we got 0x110000. 407 */ 408 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 409 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 410 #elif defined(CONFIG_SDCARD) 411 /* 412 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 413 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 414 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 415 */ 416 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 417 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 418 #elif defined(CONFIG_NAND) 419 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 420 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 421 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 422 /* 423 * Slave has no ucode locally, it can fetch this from remote. When implementing 424 * in two corenet boards, slave's ucode could be stored in master's memory 425 * space, the address can be mapped from slave TLB->slave LAW-> 426 * slave SRIO or PCIE outbound window->master inbound window-> 427 * master LAW->the ucode address in master's memory space. 428 */ 429 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 430 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 431 #else 432 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 433 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 434 #endif 435 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 436 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 437 #endif /* CONFIG_NOBQFMAN */ 438 439 #ifdef CONFIG_SYS_DPAA_FMAN 440 #define CONFIG_FMAN_ENET 441 #define CONFIG_PHYLIB_10G 442 #define CONFIG_PHY_VITESSE 443 #define CONFIG_PHY_TERANETICS 444 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 445 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 446 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 447 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 448 #define FM1_10GEC1_PHY_ADDR 0x0 449 #define FM1_10GEC2_PHY_ADDR 0x1 450 #define FM2_10GEC1_PHY_ADDR 0x2 451 #define FM2_10GEC2_PHY_ADDR 0x3 452 #endif 453 454 /* SATA */ 455 #ifdef CONFIG_FSL_SATA_V2 456 #define CONFIG_SYS_SATA_MAX_DEVICE 2 457 #define CONFIG_SATA1 458 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 459 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 460 #define CONFIG_SATA2 461 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 462 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 463 464 #define CONFIG_LBA48 465 #endif 466 467 #ifdef CONFIG_FMAN_ENET 468 #define CONFIG_ETHPRIME "FM1@DTSEC1" 469 #endif 470 471 /* 472 * USB 473 */ 474 #define CONFIG_USB_EHCI_FSL 475 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 476 #define CONFIG_HAS_FSL_DR_USB 477 478 #ifdef CONFIG_MMC 479 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 480 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 481 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 482 #define CONFIG_ESDHC_DETECT_QUIRK \ 483 (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \ 484 IS_SVR_REV(get_svr(), 1, 0)) 485 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \ 486 (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8)) 487 #endif 488 489 490 #define __USB_PHY_TYPE utmi 491 492 /* 493 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 494 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 495 * interleaving. It can be cacheline, page, bank, superbank. 496 * See doc/README.fsl-ddr for details. 497 */ 498 #ifdef CONFIG_ARCH_T4240 499 #define CTRL_INTLV_PREFERED 3way_4KB 500 #else 501 #define CTRL_INTLV_PREFERED cacheline 502 #endif 503 504 #define CONFIG_EXTRA_ENV_SETTINGS \ 505 "hwconfig=fsl_ddr:" \ 506 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 507 "bank_intlv=auto;" \ 508 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 509 "netdev=eth0\0" \ 510 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 511 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 512 "tftpflash=tftpboot $loadaddr $uboot && " \ 513 "protect off $ubootaddr +$filesize && " \ 514 "erase $ubootaddr +$filesize && " \ 515 "cp.b $loadaddr $ubootaddr $filesize && " \ 516 "protect on $ubootaddr +$filesize && " \ 517 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 518 "consoledev=ttyS0\0" \ 519 "ramdiskaddr=2000000\0" \ 520 "ramdiskfile=t4240qds/ramdisk.uboot\0" \ 521 "fdtaddr=1e00000\0" \ 522 "fdtfile=t4240qds/t4240qds.dtb\0" \ 523 "bdev=sda3\0" 524 525 #define CONFIG_HVBOOT \ 526 "setenv bootargs config-addr=0x60000000; " \ 527 "bootm 0x01000000 - 0x00f00000" 528 529 #define CONFIG_ALU \ 530 "setenv bootargs root=/dev/$bdev rw " \ 531 "console=$consoledev,$baudrate $othbootargs;" \ 532 "cpu 1 release 0x01000000 - - -;" \ 533 "cpu 2 release 0x01000000 - - -;" \ 534 "cpu 3 release 0x01000000 - - -;" \ 535 "cpu 4 release 0x01000000 - - -;" \ 536 "cpu 5 release 0x01000000 - - -;" \ 537 "cpu 6 release 0x01000000 - - -;" \ 538 "cpu 7 release 0x01000000 - - -;" \ 539 "go 0x01000000" 540 541 #define CONFIG_LINUX \ 542 "setenv bootargs root=/dev/ram rw " \ 543 "console=$consoledev,$baudrate $othbootargs;" \ 544 "setenv ramdiskaddr 0x02000000;" \ 545 "setenv fdtaddr 0x00c00000;" \ 546 "setenv loadaddr 0x1000000;" \ 547 "bootm $loadaddr $ramdiskaddr $fdtaddr" 548 549 #define CONFIG_HDBOOT \ 550 "setenv bootargs root=/dev/$bdev rw " \ 551 "console=$consoledev,$baudrate $othbootargs;" \ 552 "tftp $loadaddr $bootfile;" \ 553 "tftp $fdtaddr $fdtfile;" \ 554 "bootm $loadaddr - $fdtaddr" 555 556 #define CONFIG_NFSBOOTCOMMAND \ 557 "setenv bootargs root=/dev/nfs rw " \ 558 "nfsroot=$serverip:$rootpath " \ 559 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 560 "console=$consoledev,$baudrate $othbootargs;" \ 561 "tftp $loadaddr $bootfile;" \ 562 "tftp $fdtaddr $fdtfile;" \ 563 "bootm $loadaddr - $fdtaddr" 564 565 #define CONFIG_RAMBOOTCOMMAND \ 566 "setenv bootargs root=/dev/ram rw " \ 567 "console=$consoledev,$baudrate $othbootargs;" \ 568 "tftp $ramdiskaddr $ramdiskfile;" \ 569 "tftp $loadaddr $bootfile;" \ 570 "tftp $fdtaddr $fdtfile;" \ 571 "bootm $loadaddr $ramdiskaddr $fdtaddr" 572 573 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 574 575 #include <asm/fsl_secure_boot.h> 576 577 #endif /* __CONFIG_H */ 578