1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2011-2012 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * T4240 QDS board configuration file 8 */ 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #define CONFIG_FSL_SATA_V2 13 #define CONFIG_PCIE4 14 15 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 16 17 #ifdef CONFIG_RAMBOOT_PBL 18 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg 19 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD) 20 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 21 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 22 #else 23 #define CONFIG_SPL_FLUSH_IMAGE 24 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 25 #define CONFIG_SPL_PAD_TO 0x40000 26 #define CONFIG_SPL_MAX_SIZE 0x28000 27 #define RESET_VECTOR_OFFSET 0x27FFC 28 #define BOOT_PAGE_OFFSET 0x27000 29 30 #ifdef CONFIG_NAND 31 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 32 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 33 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 34 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 35 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg 37 #define CONFIG_SPL_NAND_BOOT 38 #endif 39 40 #ifdef CONFIG_SDCARD 41 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 42 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 43 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 44 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 45 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 46 #ifndef CONFIG_SPL_BUILD 47 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 48 #endif 49 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 50 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg 51 #define CONFIG_SPL_MMC_BOOT 52 #endif 53 54 #ifdef CONFIG_SPL_BUILD 55 #define CONFIG_SPL_SKIP_RELOCATE 56 #define CONFIG_SPL_COMMON_INIT_DDR 57 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 58 #endif 59 60 #endif 61 #endif /* CONFIG_RAMBOOT_PBL */ 62 63 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 64 /* Set 1M boot space */ 65 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 66 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 67 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 68 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 69 #endif 70 71 #define CONFIG_SRIO_PCIE_BOOT_MASTER 72 #define CONFIG_DDR_ECC 73 74 #include "t4qds.h" 75 76 #ifndef CONFIG_MTD_NOR_FLASH 77 #else 78 #define CONFIG_FLASH_CFI_DRIVER 79 #define CONFIG_SYS_FLASH_CFI 80 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 81 #endif 82 83 #if defined(CONFIG_SPIFLASH) 84 #define CONFIG_SYS_EXTRA_ENV_RELOC 85 #define CONFIG_ENV_SPI_BUS 0 86 #define CONFIG_ENV_SPI_CS 0 87 #define CONFIG_ENV_SPI_MAX_HZ 10000000 88 #define CONFIG_ENV_SPI_MODE 0 89 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 90 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 91 #define CONFIG_ENV_SECT_SIZE 0x10000 92 #elif defined(CONFIG_SDCARD) 93 #define CONFIG_SYS_EXTRA_ENV_RELOC 94 #define CONFIG_SYS_MMC_ENV_DEV 0 95 #define CONFIG_ENV_SIZE 0x2000 96 #define CONFIG_ENV_OFFSET (512 * 0x800) 97 #elif defined(CONFIG_NAND) 98 #define CONFIG_SYS_EXTRA_ENV_RELOC 99 #define CONFIG_ENV_SIZE 0x2000 100 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 101 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 102 #define CONFIG_ENV_ADDR 0xffe20000 103 #define CONFIG_ENV_SIZE 0x2000 104 #elif defined(CONFIG_ENV_IS_NOWHERE) 105 #define CONFIG_ENV_SIZE 0x2000 106 #else 107 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 108 #define CONFIG_ENV_SIZE 0x2000 109 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 110 #endif 111 112 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 113 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 114 115 #ifndef __ASSEMBLY__ 116 unsigned long get_board_sys_clk(void); 117 unsigned long get_board_ddr_clk(void); 118 #endif 119 120 /* EEPROM */ 121 #define CONFIG_ID_EEPROM 122 #define CONFIG_SYS_I2C_EEPROM_NXID 123 #define CONFIG_SYS_EEPROM_BUS_NUM 0 124 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 125 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 126 127 /* 128 * DDR Setup 129 */ 130 #define CONFIG_SYS_SPD_BUS_NUM 0 131 #define SPD_EEPROM_ADDRESS1 0x51 132 #define SPD_EEPROM_ADDRESS2 0x52 133 #define SPD_EEPROM_ADDRESS3 0x53 134 #define SPD_EEPROM_ADDRESS4 0x54 135 #define SPD_EEPROM_ADDRESS5 0x55 136 #define SPD_EEPROM_ADDRESS6 0x56 137 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 138 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 139 140 /* 141 * IFC Definitions 142 */ 143 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 144 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 145 + 0x8000000) | \ 146 CSPR_PORT_SIZE_16 | \ 147 CSPR_MSEL_NOR | \ 148 CSPR_V) 149 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 150 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 151 CSPR_PORT_SIZE_16 | \ 152 CSPR_MSEL_NOR | \ 153 CSPR_V) 154 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 155 /* NOR Flash Timing Params */ 156 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 157 158 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 159 FTIM0_NOR_TEADC(0x5) | \ 160 FTIM0_NOR_TEAHC(0x5)) 161 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 162 FTIM1_NOR_TRAD_NOR(0x1A) |\ 163 FTIM1_NOR_TSEQRAD_NOR(0x13)) 164 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 165 FTIM2_NOR_TCH(0x4) | \ 166 FTIM2_NOR_TWPH(0x0E) | \ 167 FTIM2_NOR_TWP(0x1c)) 168 #define CONFIG_SYS_NOR_FTIM3 0x0 169 170 #define CONFIG_SYS_FLASH_QUIET_TEST 171 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 172 173 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 174 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 175 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 176 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 177 178 #define CONFIG_SYS_FLASH_EMPTY_INFO 179 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 180 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 181 182 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 183 #define QIXIS_BASE 0xffdf0000 184 #define QIXIS_LBMAP_SWITCH 6 185 #define QIXIS_LBMAP_MASK 0x0f 186 #define QIXIS_LBMAP_SHIFT 0 187 #define QIXIS_LBMAP_DFLTBANK 0x00 188 #define QIXIS_LBMAP_ALTBANK 0x04 189 #define QIXIS_RST_CTL_RESET 0x83 190 #define QIXIS_RST_FORCE_MEM 0x1 191 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 192 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 193 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 194 #define QIXIS_BRDCFG5 0x55 195 #define QIXIS_MUX_SDHC 2 196 #define QIXIS_MUX_SDHC_WIDTH8 1 197 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 198 199 #define CONFIG_SYS_CSPR3_EXT (0xf) 200 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 201 | CSPR_PORT_SIZE_8 \ 202 | CSPR_MSEL_GPCM \ 203 | CSPR_V) 204 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 205 #define CONFIG_SYS_CSOR3 0x0 206 /* QIXIS Timing parameters for IFC CS3 */ 207 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 208 FTIM0_GPCM_TEADC(0x0e) | \ 209 FTIM0_GPCM_TEAHC(0x0e)) 210 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 211 FTIM1_GPCM_TRAD(0x3f)) 212 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 213 FTIM2_GPCM_TCH(0x8) | \ 214 FTIM2_GPCM_TWP(0x1f)) 215 #define CONFIG_SYS_CS3_FTIM3 0x0 216 217 /* NAND Flash on IFC */ 218 #define CONFIG_NAND_FSL_IFC 219 #define CONFIG_SYS_NAND_BASE 0xff800000 220 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 221 222 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 223 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 224 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 225 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 226 | CSPR_V) 227 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 228 229 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 230 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 231 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 232 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 233 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 234 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 235 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 236 237 #define CONFIG_SYS_NAND_ONFI_DETECTION 238 239 /* ONFI NAND Flash mode0 Timing Params */ 240 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 241 FTIM0_NAND_TWP(0x18) | \ 242 FTIM0_NAND_TWCHT(0x07) | \ 243 FTIM0_NAND_TWH(0x0a)) 244 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 245 FTIM1_NAND_TWBE(0x39) | \ 246 FTIM1_NAND_TRR(0x0e) | \ 247 FTIM1_NAND_TRP(0x18)) 248 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 249 FTIM2_NAND_TREH(0x0a) | \ 250 FTIM2_NAND_TWHRE(0x1e)) 251 #define CONFIG_SYS_NAND_FTIM3 0x0 252 253 #define CONFIG_SYS_NAND_DDR_LAW 11 254 255 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 256 #define CONFIG_SYS_MAX_NAND_DEVICE 1 257 258 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 259 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 260 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 261 262 #if defined(CONFIG_NAND) 263 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 264 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 265 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 266 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 267 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 268 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 269 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 270 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 271 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 272 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 273 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 274 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 275 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 276 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 277 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 278 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 279 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 280 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 281 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 282 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 283 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 284 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 285 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 286 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 287 #else 288 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 289 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 290 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 291 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 292 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 293 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 294 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 295 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 296 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 297 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 298 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 299 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 300 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 301 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 302 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 303 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 304 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 305 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 306 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 307 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 308 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 309 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 310 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 311 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 312 #endif 313 314 #if defined(CONFIG_RAMBOOT_PBL) 315 #define CONFIG_SYS_RAMBOOT 316 #endif 317 318 /* I2C */ 319 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 320 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 321 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 322 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 323 324 #define I2C_MUX_CH_DEFAULT 0x8 325 #define I2C_MUX_CH_VOL_MONITOR 0xa 326 #define I2C_MUX_CH_VSC3316_FS 0xc 327 #define I2C_MUX_CH_VSC3316_BS 0xd 328 329 /* Voltage monitor on channel 2*/ 330 #define I2C_VOL_MONITOR_ADDR 0x40 331 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 332 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 333 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 334 335 /* VSC Crossbar switches */ 336 #define CONFIG_VSC_CROSSBAR 337 #define VSC3316_FSM_TX_ADDR 0x70 338 #define VSC3316_FSM_RX_ADDR 0x71 339 340 /* 341 * RapidIO 342 */ 343 344 /* 345 * for slave u-boot IMAGE instored in master memory space, 346 * PHYS must be aligned based on the SIZE 347 */ 348 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 349 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 350 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 351 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 352 /* 353 * for slave UCODE and ENV instored in master memory space, 354 * PHYS must be aligned based on the SIZE 355 */ 356 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 357 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 358 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 359 360 /* slave core release by master*/ 361 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 362 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 363 364 /* 365 * SRIO_PCIE_BOOT - SLAVE 366 */ 367 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 368 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 369 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 370 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 371 #endif 372 /* 373 * eSPI - Enhanced SPI 374 */ 375 #define CONFIG_SF_DEFAULT_SPEED 10000000 376 #define CONFIG_SF_DEFAULT_MODE 0 377 378 /* Qman/Bman */ 379 #ifndef CONFIG_NOBQFMAN 380 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 381 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 382 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 383 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 384 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 385 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 386 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 387 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 388 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 389 CONFIG_SYS_BMAN_CENA_SIZE) 390 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 391 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 392 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 393 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 394 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 395 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 396 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 397 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 398 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 399 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 400 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 401 CONFIG_SYS_QMAN_CENA_SIZE) 402 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 403 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 404 405 #define CONFIG_SYS_DPAA_FMAN 406 #define CONFIG_SYS_DPAA_PME 407 #define CONFIG_SYS_PMAN 408 #define CONFIG_SYS_DPAA_DCE 409 #define CONFIG_SYS_DPAA_RMAN 410 #define CONFIG_SYS_INTERLAKEN 411 412 /* Default address of microcode for the Linux Fman driver */ 413 #if defined(CONFIG_SPIFLASH) 414 /* 415 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 416 * env, so we got 0x110000. 417 */ 418 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 419 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 420 #elif defined(CONFIG_SDCARD) 421 /* 422 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 423 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 424 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 425 */ 426 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 427 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 428 #elif defined(CONFIG_NAND) 429 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 430 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 431 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 432 /* 433 * Slave has no ucode locally, it can fetch this from remote. When implementing 434 * in two corenet boards, slave's ucode could be stored in master's memory 435 * space, the address can be mapped from slave TLB->slave LAW-> 436 * slave SRIO or PCIE outbound window->master inbound window-> 437 * master LAW->the ucode address in master's memory space. 438 */ 439 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 440 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 441 #else 442 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 443 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 444 #endif 445 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 446 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 447 #endif /* CONFIG_NOBQFMAN */ 448 449 #ifdef CONFIG_SYS_DPAA_FMAN 450 #define CONFIG_FMAN_ENET 451 #define CONFIG_PHYLIB_10G 452 #define CONFIG_PHY_VITESSE 453 #define CONFIG_PHY_TERANETICS 454 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 455 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 456 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 457 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 458 #define FM1_10GEC1_PHY_ADDR 0x0 459 #define FM1_10GEC2_PHY_ADDR 0x1 460 #define FM2_10GEC1_PHY_ADDR 0x2 461 #define FM2_10GEC2_PHY_ADDR 0x3 462 #endif 463 464 /* SATA */ 465 #ifdef CONFIG_FSL_SATA_V2 466 #define CONFIG_SYS_SATA_MAX_DEVICE 2 467 #define CONFIG_SATA1 468 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 469 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 470 #define CONFIG_SATA2 471 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 472 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 473 474 #define CONFIG_LBA48 475 #endif 476 477 #ifdef CONFIG_FMAN_ENET 478 #define CONFIG_ETHPRIME "FM1@DTSEC1" 479 #endif 480 481 /* 482 * USB 483 */ 484 #define CONFIG_USB_EHCI_FSL 485 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 486 #define CONFIG_HAS_FSL_DR_USB 487 488 #ifdef CONFIG_MMC 489 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 490 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 491 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 492 #define CONFIG_ESDHC_DETECT_QUIRK \ 493 (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \ 494 IS_SVR_REV(get_svr(), 1, 0)) 495 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \ 496 (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8)) 497 #endif 498 499 500 #define __USB_PHY_TYPE utmi 501 502 /* 503 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 504 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 505 * interleaving. It can be cacheline, page, bank, superbank. 506 * See doc/README.fsl-ddr for details. 507 */ 508 #ifdef CONFIG_ARCH_T4240 509 #define CTRL_INTLV_PREFERED 3way_4KB 510 #else 511 #define CTRL_INTLV_PREFERED cacheline 512 #endif 513 514 #define CONFIG_EXTRA_ENV_SETTINGS \ 515 "hwconfig=fsl_ddr:" \ 516 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 517 "bank_intlv=auto;" \ 518 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 519 "netdev=eth0\0" \ 520 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 521 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 522 "tftpflash=tftpboot $loadaddr $uboot && " \ 523 "protect off $ubootaddr +$filesize && " \ 524 "erase $ubootaddr +$filesize && " \ 525 "cp.b $loadaddr $ubootaddr $filesize && " \ 526 "protect on $ubootaddr +$filesize && " \ 527 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 528 "consoledev=ttyS0\0" \ 529 "ramdiskaddr=2000000\0" \ 530 "ramdiskfile=t4240qds/ramdisk.uboot\0" \ 531 "fdtaddr=1e00000\0" \ 532 "fdtfile=t4240qds/t4240qds.dtb\0" \ 533 "bdev=sda3\0" 534 535 #define CONFIG_HVBOOT \ 536 "setenv bootargs config-addr=0x60000000; " \ 537 "bootm 0x01000000 - 0x00f00000" 538 539 #define CONFIG_ALU \ 540 "setenv bootargs root=/dev/$bdev rw " \ 541 "console=$consoledev,$baudrate $othbootargs;" \ 542 "cpu 1 release 0x01000000 - - -;" \ 543 "cpu 2 release 0x01000000 - - -;" \ 544 "cpu 3 release 0x01000000 - - -;" \ 545 "cpu 4 release 0x01000000 - - -;" \ 546 "cpu 5 release 0x01000000 - - -;" \ 547 "cpu 6 release 0x01000000 - - -;" \ 548 "cpu 7 release 0x01000000 - - -;" \ 549 "go 0x01000000" 550 551 #define CONFIG_LINUX \ 552 "setenv bootargs root=/dev/ram rw " \ 553 "console=$consoledev,$baudrate $othbootargs;" \ 554 "setenv ramdiskaddr 0x02000000;" \ 555 "setenv fdtaddr 0x00c00000;" \ 556 "setenv loadaddr 0x1000000;" \ 557 "bootm $loadaddr $ramdiskaddr $fdtaddr" 558 559 #define CONFIG_HDBOOT \ 560 "setenv bootargs root=/dev/$bdev rw " \ 561 "console=$consoledev,$baudrate $othbootargs;" \ 562 "tftp $loadaddr $bootfile;" \ 563 "tftp $fdtaddr $fdtfile;" \ 564 "bootm $loadaddr - $fdtaddr" 565 566 #define CONFIG_NFSBOOTCOMMAND \ 567 "setenv bootargs root=/dev/nfs rw " \ 568 "nfsroot=$serverip:$rootpath " \ 569 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 570 "console=$consoledev,$baudrate $othbootargs;" \ 571 "tftp $loadaddr $bootfile;" \ 572 "tftp $fdtaddr $fdtfile;" \ 573 "bootm $loadaddr - $fdtaddr" 574 575 #define CONFIG_RAMBOOTCOMMAND \ 576 "setenv bootargs root=/dev/ram rw " \ 577 "console=$consoledev,$baudrate $othbootargs;" \ 578 "tftp $ramdiskaddr $ramdiskfile;" \ 579 "tftp $loadaddr $bootfile;" \ 580 "tftp $fdtaddr $fdtfile;" \ 581 "bootm $loadaddr $ramdiskaddr $fdtaddr" 582 583 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 584 585 #include <asm/fsl_secure_boot.h> 586 587 #endif /* __CONFIG_H */ 588