1 /* 2 * Copyright 2011-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 QDS board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_T4240QDS 14 15 #define CONFIG_FSL_SATA_V2 16 #define CONFIG_PCIE4 17 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 18 19 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 20 21 #ifdef CONFIG_RAMBOOT_PBL 22 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg 23 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_rcw.cfg 24 #if !defined(CONFIG_NAND) && !defined(CONFIG_SDCARD) 25 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 26 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 27 #else 28 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 29 #define CONFIG_SPL_ENV_SUPPORT 30 #define CONFIG_SPL_SERIAL_SUPPORT 31 #define CONFIG_SPL_FLUSH_IMAGE 32 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 33 #define CONFIG_SPL_LIBGENERIC_SUPPORT 34 #define CONFIG_SPL_LIBCOMMON_SUPPORT 35 #define CONFIG_SPL_I2C_SUPPORT 36 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 37 #define CONFIG_FSL_LAW /* Use common FSL init code */ 38 #define CONFIG_SYS_TEXT_BASE 0x00201000 39 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 40 #define CONFIG_SPL_PAD_TO 0x40000 41 #define CONFIG_SPL_MAX_SIZE 0x28000 42 #define RESET_VECTOR_OFFSET 0x27FFC 43 #define BOOT_PAGE_OFFSET 0x27000 44 45 #ifdef CONFIG_NAND 46 #define CONFIG_SPL_NAND_SUPPORT 47 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 48 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 49 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 50 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 51 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 52 #define CONFIG_SPL_NAND_BOOT 53 #endif 54 55 #ifdef CONFIG_SDCARD 56 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 57 #define CONFIG_SPL_MMC_SUPPORT 58 #define CONFIG_SPL_MMC_MINIMAL 59 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 60 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 61 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 62 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 63 #ifndef CONFIG_SPL_BUILD 64 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 65 #endif 66 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 67 #define CONFIG_SPL_MMC_BOOT 68 #endif 69 70 #ifdef CONFIG_SPL_BUILD 71 #define CONFIG_SPL_SKIP_RELOCATE 72 #define CONFIG_SPL_COMMON_INIT_DDR 73 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 74 #define CONFIG_SYS_NO_FLASH 75 #endif 76 77 #endif 78 #endif /* CONFIG_RAMBOOT_PBL */ 79 80 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 81 /* Set 1M boot space */ 82 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 83 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 84 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 85 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 86 #define CONFIG_SYS_NO_FLASH 87 #endif 88 89 #define CONFIG_SRIO_PCIE_BOOT_MASTER 90 #define CONFIG_DDR_ECC 91 92 #include "t4qds.h" 93 94 #ifdef CONFIG_SYS_NO_FLASH 95 #if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) 96 #define CONFIG_ENV_IS_NOWHERE 97 #endif 98 #else 99 #define CONFIG_FLASH_CFI_DRIVER 100 #define CONFIG_SYS_FLASH_CFI 101 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 102 #endif 103 104 #if defined(CONFIG_SPIFLASH) 105 #define CONFIG_SYS_EXTRA_ENV_RELOC 106 #define CONFIG_ENV_IS_IN_SPI_FLASH 107 #define CONFIG_ENV_SPI_BUS 0 108 #define CONFIG_ENV_SPI_CS 0 109 #define CONFIG_ENV_SPI_MAX_HZ 10000000 110 #define CONFIG_ENV_SPI_MODE 0 111 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 112 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 113 #define CONFIG_ENV_SECT_SIZE 0x10000 114 #elif defined(CONFIG_SDCARD) 115 #define CONFIG_SYS_EXTRA_ENV_RELOC 116 #define CONFIG_ENV_IS_IN_MMC 117 #define CONFIG_SYS_MMC_ENV_DEV 0 118 #define CONFIG_ENV_SIZE 0x2000 119 #define CONFIG_ENV_OFFSET (512 * 0x800) 120 #elif defined(CONFIG_NAND) 121 #define CONFIG_SYS_EXTRA_ENV_RELOC 122 #define CONFIG_ENV_IS_IN_NAND 123 #define CONFIG_ENV_SIZE 0x2000 124 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 125 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 126 #define CONFIG_ENV_IS_IN_REMOTE 127 #define CONFIG_ENV_ADDR 0xffe20000 128 #define CONFIG_ENV_SIZE 0x2000 129 #elif defined(CONFIG_ENV_IS_NOWHERE) 130 #define CONFIG_ENV_SIZE 0x2000 131 #else 132 #define CONFIG_ENV_IS_IN_FLASH 133 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 134 #define CONFIG_ENV_SIZE 0x2000 135 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 136 #endif 137 138 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 139 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 140 141 #ifndef __ASSEMBLY__ 142 unsigned long get_board_sys_clk(void); 143 unsigned long get_board_ddr_clk(void); 144 #endif 145 146 /* EEPROM */ 147 #define CONFIG_ID_EEPROM 148 #define CONFIG_SYS_I2C_EEPROM_NXID 149 #define CONFIG_SYS_EEPROM_BUS_NUM 0 150 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 151 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 152 153 /* 154 * DDR Setup 155 */ 156 #define CONFIG_SYS_SPD_BUS_NUM 0 157 #define SPD_EEPROM_ADDRESS1 0x51 158 #define SPD_EEPROM_ADDRESS2 0x52 159 #define SPD_EEPROM_ADDRESS3 0x53 160 #define SPD_EEPROM_ADDRESS4 0x54 161 #define SPD_EEPROM_ADDRESS5 0x55 162 #define SPD_EEPROM_ADDRESS6 0x56 163 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 164 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 165 166 /* 167 * IFC Definitions 168 */ 169 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 170 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 171 + 0x8000000) | \ 172 CSPR_PORT_SIZE_16 | \ 173 CSPR_MSEL_NOR | \ 174 CSPR_V) 175 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 176 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 177 CSPR_PORT_SIZE_16 | \ 178 CSPR_MSEL_NOR | \ 179 CSPR_V) 180 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 181 /* NOR Flash Timing Params */ 182 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 183 184 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 185 FTIM0_NOR_TEADC(0x5) | \ 186 FTIM0_NOR_TEAHC(0x5)) 187 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 188 FTIM1_NOR_TRAD_NOR(0x1A) |\ 189 FTIM1_NOR_TSEQRAD_NOR(0x13)) 190 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 191 FTIM2_NOR_TCH(0x4) | \ 192 FTIM2_NOR_TWPH(0x0E) | \ 193 FTIM2_NOR_TWP(0x1c)) 194 #define CONFIG_SYS_NOR_FTIM3 0x0 195 196 #define CONFIG_SYS_FLASH_QUIET_TEST 197 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 198 199 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 200 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 201 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 202 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 203 204 #define CONFIG_SYS_FLASH_EMPTY_INFO 205 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 206 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 207 208 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 209 #define QIXIS_BASE 0xffdf0000 210 #define QIXIS_LBMAP_SWITCH 6 211 #define QIXIS_LBMAP_MASK 0x0f 212 #define QIXIS_LBMAP_SHIFT 0 213 #define QIXIS_LBMAP_DFLTBANK 0x00 214 #define QIXIS_LBMAP_ALTBANK 0x04 215 #define QIXIS_RST_CTL_RESET 0x83 216 #define QIXIS_RST_FORCE_MEM 0x1 217 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 218 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 219 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 220 #define QIXIS_BRDCFG5 0x55 221 #define QIXIS_MUX_SDHC 2 222 #define QIXIS_MUX_SDHC_WIDTH8 1 223 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 224 225 #define CONFIG_SYS_CSPR3_EXT (0xf) 226 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 227 | CSPR_PORT_SIZE_8 \ 228 | CSPR_MSEL_GPCM \ 229 | CSPR_V) 230 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 231 #define CONFIG_SYS_CSOR3 0x0 232 /* QIXIS Timing parameters for IFC CS3 */ 233 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 234 FTIM0_GPCM_TEADC(0x0e) | \ 235 FTIM0_GPCM_TEAHC(0x0e)) 236 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 237 FTIM1_GPCM_TRAD(0x3f)) 238 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 239 FTIM2_GPCM_TCH(0x8) | \ 240 FTIM2_GPCM_TWP(0x1f)) 241 #define CONFIG_SYS_CS3_FTIM3 0x0 242 243 /* NAND Flash on IFC */ 244 #define CONFIG_NAND_FSL_IFC 245 #define CONFIG_SYS_NAND_BASE 0xff800000 246 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 247 248 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 249 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 250 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 251 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 252 | CSPR_V) 253 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 254 255 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 256 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 257 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 258 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 259 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 260 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 261 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 262 263 #define CONFIG_SYS_NAND_ONFI_DETECTION 264 265 /* ONFI NAND Flash mode0 Timing Params */ 266 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 267 FTIM0_NAND_TWP(0x18) | \ 268 FTIM0_NAND_TWCHT(0x07) | \ 269 FTIM0_NAND_TWH(0x0a)) 270 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 271 FTIM1_NAND_TWBE(0x39) | \ 272 FTIM1_NAND_TRR(0x0e) | \ 273 FTIM1_NAND_TRP(0x18)) 274 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 275 FTIM2_NAND_TREH(0x0a) | \ 276 FTIM2_NAND_TWHRE(0x1e)) 277 #define CONFIG_SYS_NAND_FTIM3 0x0 278 279 #define CONFIG_SYS_NAND_DDR_LAW 11 280 281 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 282 #define CONFIG_SYS_MAX_NAND_DEVICE 1 283 #define CONFIG_CMD_NAND 284 285 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 286 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 287 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 288 289 #if defined(CONFIG_NAND) 290 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 291 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 292 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 293 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 294 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 295 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 296 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 297 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 298 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 299 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 300 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 301 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 302 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 303 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 304 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 305 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 306 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 307 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 308 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 309 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 310 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 311 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 312 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 313 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 314 #else 315 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 316 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 317 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 318 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 319 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 320 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 321 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 322 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 323 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 324 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 325 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 326 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 327 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 328 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 329 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 330 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 331 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 332 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 333 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 334 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 335 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 336 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 337 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 338 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 339 #endif 340 341 #if defined(CONFIG_RAMBOOT_PBL) 342 #define CONFIG_SYS_RAMBOOT 343 #endif 344 345 /* I2C */ 346 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 347 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 348 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 349 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 350 351 #define I2C_MUX_CH_DEFAULT 0x8 352 #define I2C_MUX_CH_VOL_MONITOR 0xa 353 #define I2C_MUX_CH_VSC3316_FS 0xc 354 #define I2C_MUX_CH_VSC3316_BS 0xd 355 356 /* Voltage monitor on channel 2*/ 357 #define I2C_VOL_MONITOR_ADDR 0x40 358 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 359 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 360 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 361 362 /* VSC Crossbar switches */ 363 #define CONFIG_VSC_CROSSBAR 364 #define VSC3316_FSM_TX_ADDR 0x70 365 #define VSC3316_FSM_RX_ADDR 0x71 366 367 /* 368 * RapidIO 369 */ 370 371 /* 372 * for slave u-boot IMAGE instored in master memory space, 373 * PHYS must be aligned based on the SIZE 374 */ 375 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 376 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 377 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 378 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 379 /* 380 * for slave UCODE and ENV instored in master memory space, 381 * PHYS must be aligned based on the SIZE 382 */ 383 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 384 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 385 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 386 387 /* slave core release by master*/ 388 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 389 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 390 391 /* 392 * SRIO_PCIE_BOOT - SLAVE 393 */ 394 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 395 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 396 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 397 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 398 #endif 399 /* 400 * eSPI - Enhanced SPI 401 */ 402 #define CONFIG_SF_DEFAULT_SPEED 10000000 403 #define CONFIG_SF_DEFAULT_MODE 0 404 405 /* Qman/Bman */ 406 #ifndef CONFIG_NOBQFMAN 407 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 408 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 409 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 410 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 411 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 412 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 413 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 414 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 415 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 416 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 417 CONFIG_SYS_BMAN_CENA_SIZE) 418 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 419 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 420 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 421 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 422 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 423 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 424 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 425 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 426 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 427 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 428 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 429 CONFIG_SYS_QMAN_CENA_SIZE) 430 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 431 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 432 433 #define CONFIG_SYS_DPAA_FMAN 434 #define CONFIG_SYS_DPAA_PME 435 #define CONFIG_SYS_PMAN 436 #define CONFIG_SYS_DPAA_DCE 437 #define CONFIG_SYS_DPAA_RMAN 438 #define CONFIG_SYS_INTERLAKEN 439 440 /* Default address of microcode for the Linux Fman driver */ 441 #if defined(CONFIG_SPIFLASH) 442 /* 443 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 444 * env, so we got 0x110000. 445 */ 446 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 447 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 448 #elif defined(CONFIG_SDCARD) 449 /* 450 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 451 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 452 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 453 */ 454 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 455 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 456 #elif defined(CONFIG_NAND) 457 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 458 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 459 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 460 /* 461 * Slave has no ucode locally, it can fetch this from remote. When implementing 462 * in two corenet boards, slave's ucode could be stored in master's memory 463 * space, the address can be mapped from slave TLB->slave LAW-> 464 * slave SRIO or PCIE outbound window->master inbound window-> 465 * master LAW->the ucode address in master's memory space. 466 */ 467 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 468 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 469 #else 470 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 471 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 472 #endif 473 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 474 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 475 #endif /* CONFIG_NOBQFMAN */ 476 477 #ifdef CONFIG_SYS_DPAA_FMAN 478 #define CONFIG_FMAN_ENET 479 #define CONFIG_PHYLIB_10G 480 #define CONFIG_PHY_VITESSE 481 #define CONFIG_PHY_TERANETICS 482 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 483 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 484 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 485 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 486 #define FM1_10GEC1_PHY_ADDR 0x0 487 #define FM1_10GEC2_PHY_ADDR 0x1 488 #define FM2_10GEC1_PHY_ADDR 0x2 489 #define FM2_10GEC2_PHY_ADDR 0x3 490 #endif 491 492 /* SATA */ 493 #ifdef CONFIG_FSL_SATA_V2 494 #define CONFIG_LIBATA 495 #define CONFIG_FSL_SATA 496 497 #define CONFIG_SYS_SATA_MAX_DEVICE 2 498 #define CONFIG_SATA1 499 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 500 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 501 #define CONFIG_SATA2 502 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 503 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 504 505 #define CONFIG_LBA48 506 #define CONFIG_CMD_SATA 507 #define CONFIG_DOS_PARTITION 508 #endif 509 510 #ifdef CONFIG_FMAN_ENET 511 #define CONFIG_MII /* MII PHY management */ 512 #define CONFIG_ETHPRIME "FM1@DTSEC1" 513 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 514 #endif 515 516 /* Hash command with SHA acceleration supported in hardware */ 517 #ifdef CONFIG_FSL_CAAM 518 #define CONFIG_CMD_HASH 519 #define CONFIG_SHA_HW_ACCEL 520 #endif 521 522 /* 523 * USB 524 */ 525 #define CONFIG_USB_STORAGE 526 #define CONFIG_USB_EHCI 527 #define CONFIG_USB_EHCI_FSL 528 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 529 #define CONFIG_HAS_FSL_DR_USB 530 531 #define CONFIG_MMC 532 533 #ifdef CONFIG_MMC 534 #define CONFIG_FSL_ESDHC 535 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 536 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 537 #define CONFIG_GENERIC_MMC 538 #define CONFIG_DOS_PARTITION 539 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 540 #define CONFIG_ESDHC_DETECT_QUIRK \ 541 (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \ 542 IS_SVR_REV(get_svr(), 1, 0)) 543 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \ 544 (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8)) 545 #endif 546 547 548 #define __USB_PHY_TYPE utmi 549 550 /* 551 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 552 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 553 * interleaving. It can be cacheline, page, bank, superbank. 554 * See doc/README.fsl-ddr for details. 555 */ 556 #ifdef CONFIG_PPC_T4240 557 #define CTRL_INTLV_PREFERED 3way_4KB 558 #else 559 #define CTRL_INTLV_PREFERED cacheline 560 #endif 561 562 #define CONFIG_EXTRA_ENV_SETTINGS \ 563 "hwconfig=fsl_ddr:" \ 564 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 565 "bank_intlv=auto;" \ 566 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 567 "netdev=eth0\0" \ 568 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 569 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 570 "tftpflash=tftpboot $loadaddr $uboot && " \ 571 "protect off $ubootaddr +$filesize && " \ 572 "erase $ubootaddr +$filesize && " \ 573 "cp.b $loadaddr $ubootaddr $filesize && " \ 574 "protect on $ubootaddr +$filesize && " \ 575 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 576 "consoledev=ttyS0\0" \ 577 "ramdiskaddr=2000000\0" \ 578 "ramdiskfile=t4240qds/ramdisk.uboot\0" \ 579 "fdtaddr=1e00000\0" \ 580 "fdtfile=t4240qds/t4240qds.dtb\0" \ 581 "bdev=sda3\0" 582 583 #define CONFIG_HVBOOT \ 584 "setenv bootargs config-addr=0x60000000; " \ 585 "bootm 0x01000000 - 0x00f00000" 586 587 #define CONFIG_ALU \ 588 "setenv bootargs root=/dev/$bdev rw " \ 589 "console=$consoledev,$baudrate $othbootargs;" \ 590 "cpu 1 release 0x01000000 - - -;" \ 591 "cpu 2 release 0x01000000 - - -;" \ 592 "cpu 3 release 0x01000000 - - -;" \ 593 "cpu 4 release 0x01000000 - - -;" \ 594 "cpu 5 release 0x01000000 - - -;" \ 595 "cpu 6 release 0x01000000 - - -;" \ 596 "cpu 7 release 0x01000000 - - -;" \ 597 "go 0x01000000" 598 599 #define CONFIG_LINUX \ 600 "setenv bootargs root=/dev/ram rw " \ 601 "console=$consoledev,$baudrate $othbootargs;" \ 602 "setenv ramdiskaddr 0x02000000;" \ 603 "setenv fdtaddr 0x00c00000;" \ 604 "setenv loadaddr 0x1000000;" \ 605 "bootm $loadaddr $ramdiskaddr $fdtaddr" 606 607 #define CONFIG_HDBOOT \ 608 "setenv bootargs root=/dev/$bdev rw " \ 609 "console=$consoledev,$baudrate $othbootargs;" \ 610 "tftp $loadaddr $bootfile;" \ 611 "tftp $fdtaddr $fdtfile;" \ 612 "bootm $loadaddr - $fdtaddr" 613 614 #define CONFIG_NFSBOOTCOMMAND \ 615 "setenv bootargs root=/dev/nfs rw " \ 616 "nfsroot=$serverip:$rootpath " \ 617 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 618 "console=$consoledev,$baudrate $othbootargs;" \ 619 "tftp $loadaddr $bootfile;" \ 620 "tftp $fdtaddr $fdtfile;" \ 621 "bootm $loadaddr - $fdtaddr" 622 623 #define CONFIG_RAMBOOTCOMMAND \ 624 "setenv bootargs root=/dev/ram rw " \ 625 "console=$consoledev,$baudrate $othbootargs;" \ 626 "tftp $ramdiskaddr $ramdiskfile;" \ 627 "tftp $loadaddr $bootfile;" \ 628 "tftp $fdtaddr $fdtfile;" \ 629 "bootm $loadaddr $ramdiskaddr $fdtaddr" 630 631 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 632 633 #include <asm/fsl_secure_boot.h> 634 635 #endif /* __CONFIG_H */ 636