1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2011-2013 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * T2080/T2081 QDS board configuration file 8 */ 9 10 #ifndef __T208xQDS_H 11 #define __T208xQDS_H 12 13 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 14 #if defined(CONFIG_ARCH_T2080) 15 #define CONFIG_FSL_SATA_V2 16 #define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */ 17 #define CONFIG_SRIO1 /* SRIO port 1 */ 18 #define CONFIG_SRIO2 /* SRIO port 2 */ 19 #elif defined(CONFIG_ARCH_T2081) 20 #endif 21 22 /* High Level Configuration Options */ 23 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 24 #define CONFIG_MP /* support multiple processors */ 25 #define CONFIG_ENABLE_36BIT_PHYS 26 27 #ifdef CONFIG_PHYS_64BIT 28 #define CONFIG_ADDR_MAP 1 29 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 30 #endif 31 32 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 33 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 34 #define CONFIG_ENV_OVERWRITE 35 36 #ifdef CONFIG_RAMBOOT_PBL 37 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg 38 39 #define CONFIG_SPL_FLUSH_IMAGE 40 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 41 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 42 #define CONFIG_SPL_PAD_TO 0x40000 43 #define CONFIG_SPL_MAX_SIZE 0x28000 44 #define RESET_VECTOR_OFFSET 0x27FFC 45 #define BOOT_PAGE_OFFSET 0x27000 46 #ifdef CONFIG_SPL_BUILD 47 #define CONFIG_SPL_SKIP_RELOCATE 48 #define CONFIG_SPL_COMMON_INIT_DDR 49 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 50 #endif 51 52 #ifdef CONFIG_NAND 53 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 54 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 55 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 56 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 57 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 58 #if defined(CONFIG_ARCH_T2080) 59 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg 60 #elif defined(CONFIG_ARCH_T2081) 61 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg 62 #endif 63 #define CONFIG_SPL_NAND_BOOT 64 #endif 65 66 #ifdef CONFIG_SPIFLASH 67 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 68 #define CONFIG_SPL_SPI_FLASH_MINIMAL 69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 73 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 74 #ifndef CONFIG_SPL_BUILD 75 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 76 #endif 77 #if defined(CONFIG_ARCH_T2080) 78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg 79 #elif defined(CONFIG_ARCH_T2081) 80 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg 81 #endif 82 #define CONFIG_SPL_SPI_BOOT 83 #endif 84 85 #ifdef CONFIG_SDCARD 86 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 87 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 88 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 89 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 90 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 91 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 92 #ifndef CONFIG_SPL_BUILD 93 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 94 #endif 95 #if defined(CONFIG_ARCH_T2080) 96 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg 97 #elif defined(CONFIG_ARCH_T2081) 98 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg 99 #endif 100 #define CONFIG_SPL_MMC_BOOT 101 #endif 102 103 #endif /* CONFIG_RAMBOOT_PBL */ 104 105 #define CONFIG_SRIO_PCIE_BOOT_MASTER 106 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 107 /* Set 1M boot space */ 108 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 109 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 110 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 111 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 112 #endif 113 114 #ifndef CONFIG_RESET_VECTOR_ADDRESS 115 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 116 #endif 117 118 /* 119 * These can be toggled for performance analysis, otherwise use default. 120 */ 121 #define CONFIG_SYS_CACHE_STASHING 122 #define CONFIG_BTB /* toggle branch predition */ 123 #define CONFIG_DDR_ECC 124 #ifdef CONFIG_DDR_ECC 125 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 126 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 127 #endif 128 129 #ifdef CONFIG_MTD_NOR_FLASH 130 #define CONFIG_FLASH_CFI_DRIVER 131 #define CONFIG_SYS_FLASH_CFI 132 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 133 #endif 134 135 #if defined(CONFIG_SPIFLASH) 136 #define CONFIG_SYS_EXTRA_ENV_RELOC 137 #define CONFIG_ENV_SPI_BUS 0 138 #define CONFIG_ENV_SPI_CS 0 139 #define CONFIG_ENV_SPI_MAX_HZ 10000000 140 #define CONFIG_ENV_SPI_MODE 0 141 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 142 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 143 #define CONFIG_ENV_SECT_SIZE 0x10000 144 #elif defined(CONFIG_SDCARD) 145 #define CONFIG_SYS_EXTRA_ENV_RELOC 146 #define CONFIG_SYS_MMC_ENV_DEV 0 147 #define CONFIG_ENV_SIZE 0x2000 148 #define CONFIG_ENV_OFFSET (512 * 0x800) 149 #elif defined(CONFIG_NAND) 150 #define CONFIG_SYS_EXTRA_ENV_RELOC 151 #define CONFIG_ENV_SIZE 0x2000 152 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 153 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 154 #define CONFIG_ENV_ADDR 0xffe20000 155 #define CONFIG_ENV_SIZE 0x2000 156 #elif defined(CONFIG_ENV_IS_NOWHERE) 157 #define CONFIG_ENV_SIZE 0x2000 158 #else 159 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 160 #define CONFIG_ENV_SIZE 0x2000 161 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 162 #endif 163 164 #ifndef __ASSEMBLY__ 165 unsigned long get_board_sys_clk(void); 166 unsigned long get_board_ddr_clk(void); 167 #endif 168 169 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 170 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 171 172 /* 173 * Config the L3 Cache as L3 SRAM 174 */ 175 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 176 #define CONFIG_SYS_L3_SIZE (512 << 10) 177 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 178 #ifdef CONFIG_RAMBOOT_PBL 179 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 180 #endif 181 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 182 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 183 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 184 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 185 186 #define CONFIG_SYS_DCSRBAR 0xf0000000 187 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 188 189 /* EEPROM */ 190 #define CONFIG_ID_EEPROM 191 #define CONFIG_SYS_I2C_EEPROM_NXID 192 #define CONFIG_SYS_EEPROM_BUS_NUM 0 193 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 194 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 195 196 /* 197 * DDR Setup 198 */ 199 #define CONFIG_VERY_BIG_RAM 200 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 201 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 202 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 203 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 204 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 205 #define CONFIG_DDR_SPD 206 #define CONFIG_FSL_DDR_INTERACTIVE 207 #define CONFIG_SYS_SPD_BUS_NUM 0 208 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ 209 #define SPD_EEPROM_ADDRESS1 0x51 210 #define SPD_EEPROM_ADDRESS2 0x52 211 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 212 #define CTRL_INTLV_PREFERED cacheline 213 214 /* 215 * IFC Definitions 216 */ 217 #define CONFIG_SYS_FLASH_BASE 0xe0000000 218 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 219 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 220 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 221 + 0x8000000) | \ 222 CSPR_PORT_SIZE_16 | \ 223 CSPR_MSEL_NOR | \ 224 CSPR_V) 225 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 226 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 227 CSPR_PORT_SIZE_16 | \ 228 CSPR_MSEL_NOR | \ 229 CSPR_V) 230 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 231 /* NOR Flash Timing Params */ 232 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 233 234 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 235 FTIM0_NOR_TEADC(0x5) | \ 236 FTIM0_NOR_TEAHC(0x5)) 237 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 238 FTIM1_NOR_TRAD_NOR(0x1A) |\ 239 FTIM1_NOR_TSEQRAD_NOR(0x13)) 240 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 241 FTIM2_NOR_TCH(0x4) | \ 242 FTIM2_NOR_TWPH(0x0E) | \ 243 FTIM2_NOR_TWP(0x1c)) 244 #define CONFIG_SYS_NOR_FTIM3 0x0 245 246 #define CONFIG_SYS_FLASH_QUIET_TEST 247 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 248 249 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 250 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 251 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 252 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 253 254 #define CONFIG_SYS_FLASH_EMPTY_INFO 255 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 256 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 257 258 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 259 #define QIXIS_BASE 0xffdf0000 260 #define QIXIS_LBMAP_SWITCH 6 261 #define QIXIS_LBMAP_MASK 0x0f 262 #define QIXIS_LBMAP_SHIFT 0 263 #define QIXIS_LBMAP_DFLTBANK 0x00 264 #define QIXIS_LBMAP_ALTBANK 0x04 265 #define QIXIS_LBMAP_NAND 0x09 266 #define QIXIS_LBMAP_SD 0x00 267 #define QIXIS_RCW_SRC_NAND 0x104 268 #define QIXIS_RCW_SRC_SD 0x040 269 #define QIXIS_RST_CTL_RESET 0x83 270 #define QIXIS_RST_FORCE_MEM 0x1 271 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 272 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 273 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 274 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 275 276 #define CONFIG_SYS_CSPR3_EXT (0xf) 277 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 278 | CSPR_PORT_SIZE_8 \ 279 | CSPR_MSEL_GPCM \ 280 | CSPR_V) 281 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 282 #define CONFIG_SYS_CSOR3 0x0 283 /* QIXIS Timing parameters for IFC CS3 */ 284 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 285 FTIM0_GPCM_TEADC(0x0e) | \ 286 FTIM0_GPCM_TEAHC(0x0e)) 287 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 288 FTIM1_GPCM_TRAD(0x3f)) 289 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 290 FTIM2_GPCM_TCH(0x8) | \ 291 FTIM2_GPCM_TWP(0x1f)) 292 #define CONFIG_SYS_CS3_FTIM3 0x0 293 294 /* NAND Flash on IFC */ 295 #define CONFIG_NAND_FSL_IFC 296 #define CONFIG_SYS_NAND_BASE 0xff800000 297 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 298 299 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 300 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 301 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 302 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 303 | CSPR_V) 304 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 305 306 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 307 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 308 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 309 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 310 | CSOR_NAND_PGS_2K /* Page Size = 2K */\ 311 | CSOR_NAND_SPRZ_64 /* Spare size = 64 */\ 312 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 313 314 #define CONFIG_SYS_NAND_ONFI_DETECTION 315 316 /* ONFI NAND Flash mode0 Timing Params */ 317 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 318 FTIM0_NAND_TWP(0x18) | \ 319 FTIM0_NAND_TWCHT(0x07) | \ 320 FTIM0_NAND_TWH(0x0a)) 321 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 322 FTIM1_NAND_TWBE(0x39) | \ 323 FTIM1_NAND_TRR(0x0e) | \ 324 FTIM1_NAND_TRP(0x18)) 325 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 326 FTIM2_NAND_TREH(0x0a) | \ 327 FTIM2_NAND_TWHRE(0x1e)) 328 #define CONFIG_SYS_NAND_FTIM3 0x0 329 330 #define CONFIG_SYS_NAND_DDR_LAW 11 331 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 332 #define CONFIG_SYS_MAX_NAND_DEVICE 1 333 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 334 335 #if defined(CONFIG_NAND) 336 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 337 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 338 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 339 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 340 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 341 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 342 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 343 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 344 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 345 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 346 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 347 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 348 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 349 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 350 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 351 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 352 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 353 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 354 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 355 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 356 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 357 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 358 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 359 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 360 #else 361 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 362 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 363 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 364 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 365 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 366 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 367 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 368 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 369 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 370 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 371 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 372 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 373 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 374 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 375 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 376 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 377 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 378 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 379 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 380 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 381 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 382 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 383 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 384 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 385 #endif 386 387 #if defined(CONFIG_RAMBOOT_PBL) 388 #define CONFIG_SYS_RAMBOOT 389 #endif 390 391 #ifdef CONFIG_SPL_BUILD 392 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 393 #else 394 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 395 #endif 396 397 #define CONFIG_MISC_INIT_R 398 #define CONFIG_HWCONFIG 399 400 /* define to use L1 as initial stack */ 401 #define CONFIG_L1_INIT_RAM 402 #define CONFIG_SYS_INIT_RAM_LOCK 403 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 404 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 405 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 406 /* The assembler doesn't like typecast */ 407 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 408 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 409 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 410 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 411 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 412 GENERATED_GBL_DATA_SIZE) 413 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 414 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 415 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 416 417 /* 418 * Serial Port 419 */ 420 #define CONFIG_SYS_NS16550_SERIAL 421 #define CONFIG_SYS_NS16550_REG_SIZE 1 422 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 423 #define CONFIG_SYS_BAUDRATE_TABLE \ 424 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 425 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 426 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 427 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 428 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 429 430 /* 431 * I2C 432 */ 433 #define CONFIG_SYS_I2C 434 #define CONFIG_SYS_I2C_FSL 435 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 436 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 437 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 438 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 439 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 440 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 441 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 442 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 443 #define CONFIG_SYS_FSL_I2C_SPEED 100000 444 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 445 #define CONFIG_SYS_FSL_I2C3_SPEED 100000 446 #define CONFIG_SYS_FSL_I2C4_SPEED 100000 447 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 448 #define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ 449 #define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */ 450 #define I2C_MUX_CH_DEFAULT 0x8 451 452 #define I2C_MUX_CH_VOL_MONITOR 0xa 453 454 /* Voltage monitor on channel 2*/ 455 #define I2C_VOL_MONITOR_ADDR 0x40 456 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 457 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 458 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 459 460 #define CONFIG_VID_FLS_ENV "t208xqds_vdd_mv" 461 #ifndef CONFIG_SPL_BUILD 462 #define CONFIG_VID 463 #endif 464 #define CONFIG_VOL_MONITOR_IR36021_SET 465 #define CONFIG_VOL_MONITOR_IR36021_READ 466 /* The lowest and highest voltage allowed for T208xQDS */ 467 #define VDD_MV_MIN 819 468 #define VDD_MV_MAX 1212 469 470 /* 471 * RapidIO 472 */ 473 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 474 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 475 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 476 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 477 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 478 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 479 /* 480 * for slave u-boot IMAGE instored in master memory space, 481 * PHYS must be aligned based on the SIZE 482 */ 483 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 484 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 485 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 486 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 487 /* 488 * for slave UCODE and ENV instored in master memory space, 489 * PHYS must be aligned based on the SIZE 490 */ 491 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 492 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 493 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 494 495 /* slave core release by master*/ 496 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 497 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 498 499 /* 500 * SRIO_PCIE_BOOT - SLAVE 501 */ 502 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 503 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 504 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 505 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 506 #endif 507 508 /* 509 * eSPI - Enhanced SPI 510 */ 511 #ifdef CONFIG_SPI_FLASH 512 513 #define CONFIG_SPI_FLASH_BAR 514 #define CONFIG_SF_DEFAULT_SPEED 10000000 515 #define CONFIG_SF_DEFAULT_MODE 0 516 #endif 517 518 /* 519 * General PCI 520 * Memory space is mapped 1-1, but I/O space must start from 0. 521 */ 522 #define CONFIG_PCIE1 /* PCIE controller 1 */ 523 #define CONFIG_PCIE2 /* PCIE controller 2 */ 524 #define CONFIG_PCIE3 /* PCIE controller 3 */ 525 #define CONFIG_PCIE4 /* PCIE controller 4 */ 526 #define CONFIG_FSL_PCIE_RESET /* pcie reset fix link width 2x-4x*/ 527 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 528 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 529 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 530 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 531 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 532 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 533 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 534 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 535 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 536 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 537 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 538 539 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 540 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 541 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 542 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 543 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 544 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 545 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 546 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 547 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 548 549 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 550 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 551 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 552 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc30000000ull 553 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 554 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 555 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 556 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 557 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 558 559 /* controller 4, Base address 203000 */ 560 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xc0000000 561 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 562 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull 563 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 564 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 565 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 566 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 567 568 #ifdef CONFIG_PCI 569 #define CONFIG_PCI_INDIRECT_BRIDGE 570 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 571 #endif 572 573 /* Qman/Bman */ 574 #ifndef CONFIG_NOBQFMAN 575 #define CONFIG_SYS_BMAN_NUM_PORTALS 18 576 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 577 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 578 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 579 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 580 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 581 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 582 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 583 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 584 CONFIG_SYS_BMAN_CENA_SIZE) 585 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 586 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 587 #define CONFIG_SYS_QMAN_NUM_PORTALS 18 588 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 589 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 590 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 591 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 592 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 593 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 594 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 595 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 596 CONFIG_SYS_QMAN_CENA_SIZE) 597 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 598 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 599 600 #define CONFIG_SYS_DPAA_FMAN 601 #define CONFIG_SYS_DPAA_PME 602 #define CONFIG_SYS_PMAN 603 #define CONFIG_SYS_DPAA_DCE 604 #define CONFIG_SYS_DPAA_RMAN /* RMan */ 605 #define CONFIG_SYS_INTERLAKEN 606 607 /* Default address of microcode for the Linux Fman driver */ 608 #if defined(CONFIG_SPIFLASH) 609 /* 610 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 611 * env, so we got 0x110000. 612 */ 613 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 614 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 615 #elif defined(CONFIG_SDCARD) 616 /* 617 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 618 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 619 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 620 */ 621 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 622 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 623 #elif defined(CONFIG_NAND) 624 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 625 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 626 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 627 /* 628 * Slave has no ucode locally, it can fetch this from remote. When implementing 629 * in two corenet boards, slave's ucode could be stored in master's memory 630 * space, the address can be mapped from slave TLB->slave LAW-> 631 * slave SRIO or PCIE outbound window->master inbound window-> 632 * master LAW->the ucode address in master's memory space. 633 */ 634 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 635 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 636 #else 637 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 638 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 639 #endif 640 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 641 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 642 #endif /* CONFIG_NOBQFMAN */ 643 644 #ifdef CONFIG_SYS_DPAA_FMAN 645 #define CONFIG_FMAN_ENET 646 #define CONFIG_PHYLIB_10G 647 #define CONFIG_PHY_VITESSE 648 #define CONFIG_PHY_REALTEK 649 #define CONFIG_PHY_TERANETICS 650 #define RGMII_PHY1_ADDR 0x1 651 #define RGMII_PHY2_ADDR 0x2 652 #define FM1_10GEC1_PHY_ADDR 0x3 653 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 654 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 655 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 656 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 657 #endif 658 659 #ifdef CONFIG_FMAN_ENET 660 #define CONFIG_MII /* MII PHY management */ 661 #define CONFIG_ETHPRIME "FM1@DTSEC3" 662 #endif 663 664 /* 665 * SATA 666 */ 667 #ifdef CONFIG_FSL_SATA_V2 668 #define CONFIG_SYS_SATA_MAX_DEVICE 2 669 #define CONFIG_SATA1 670 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 671 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 672 #define CONFIG_SATA2 673 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 674 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 675 #define CONFIG_LBA48 676 #endif 677 678 /* 679 * USB 680 */ 681 #ifdef CONFIG_USB_EHCI_HCD 682 #define CONFIG_USB_EHCI_FSL 683 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 684 #define CONFIG_HAS_FSL_DR_USB 685 #endif 686 687 /* 688 * SDHC 689 */ 690 #ifdef CONFIG_MMC 691 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK 692 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 693 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 694 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 695 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT 696 #endif 697 698 /* 699 * Dynamic MTD Partition support with mtdparts 700 */ 701 #ifdef CONFIG_MTD_NOR_FLASH 702 #define CONFIG_MTD_DEVICE 703 #define CONFIG_MTD_PARTITIONS 704 #define CONFIG_FLASH_CFI_MTD 705 #endif 706 707 /* 708 * Environment 709 */ 710 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 711 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 712 713 /* 714 * Miscellaneous configurable options 715 */ 716 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 717 718 /* 719 * For booting Linux, the board info and command line data 720 * have to be in the first 64 MB of memory, since this is 721 * the maximum mapped by the Linux kernel during initialization. 722 */ 723 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 724 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 725 726 #ifdef CONFIG_CMD_KGDB 727 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 728 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 729 #endif 730 731 /* 732 * Environment Configuration 733 */ 734 #define CONFIG_ROOTPATH "/opt/nfsroot" 735 #define CONFIG_BOOTFILE "uImage" 736 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 737 738 /* default location for tftp and bootm */ 739 #define CONFIG_LOADADDR 1000000 740 #define __USB_PHY_TYPE utmi 741 742 #define CONFIG_EXTRA_ENV_SETTINGS \ 743 "hwconfig=fsl_ddr:" \ 744 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 745 "bank_intlv=auto;" \ 746 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 747 "netdev=eth0\0" \ 748 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 749 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 750 "tftpflash=tftpboot $loadaddr $uboot && " \ 751 "protect off $ubootaddr +$filesize && " \ 752 "erase $ubootaddr +$filesize && " \ 753 "cp.b $loadaddr $ubootaddr $filesize && " \ 754 "protect on $ubootaddr +$filesize && " \ 755 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 756 "consoledev=ttyS0\0" \ 757 "ramdiskaddr=2000000\0" \ 758 "ramdiskfile=t2080qds/ramdisk.uboot\0" \ 759 "fdtaddr=1e00000\0" \ 760 "fdtfile=t2080qds/t2080qds.dtb\0" \ 761 "bdev=sda3\0" 762 763 /* 764 * For emulation this causes u-boot to jump to the start of the 765 * proof point app code automatically 766 */ 767 #define CONFIG_PROOF_POINTS \ 768 "setenv bootargs root=/dev/$bdev rw " \ 769 "console=$consoledev,$baudrate $othbootargs;" \ 770 "cpu 1 release 0x29000000 - - -;" \ 771 "cpu 2 release 0x29000000 - - -;" \ 772 "cpu 3 release 0x29000000 - - -;" \ 773 "cpu 4 release 0x29000000 - - -;" \ 774 "cpu 5 release 0x29000000 - - -;" \ 775 "cpu 6 release 0x29000000 - - -;" \ 776 "cpu 7 release 0x29000000 - - -;" \ 777 "go 0x29000000" 778 779 #define CONFIG_HVBOOT \ 780 "setenv bootargs config-addr=0x60000000; " \ 781 "bootm 0x01000000 - 0x00f00000" 782 783 #define CONFIG_ALU \ 784 "setenv bootargs root=/dev/$bdev rw " \ 785 "console=$consoledev,$baudrate $othbootargs;" \ 786 "cpu 1 release 0x01000000 - - -;" \ 787 "cpu 2 release 0x01000000 - - -;" \ 788 "cpu 3 release 0x01000000 - - -;" \ 789 "cpu 4 release 0x01000000 - - -;" \ 790 "cpu 5 release 0x01000000 - - -;" \ 791 "cpu 6 release 0x01000000 - - -;" \ 792 "cpu 7 release 0x01000000 - - -;" \ 793 "go 0x01000000" 794 795 #define CONFIG_LINUX \ 796 "setenv bootargs root=/dev/ram rw " \ 797 "console=$consoledev,$baudrate $othbootargs;" \ 798 "setenv ramdiskaddr 0x02000000;" \ 799 "setenv fdtaddr 0x00c00000;" \ 800 "setenv loadaddr 0x1000000;" \ 801 "bootm $loadaddr $ramdiskaddr $fdtaddr" 802 803 #define CONFIG_HDBOOT \ 804 "setenv bootargs root=/dev/$bdev rw " \ 805 "console=$consoledev,$baudrate $othbootargs;" \ 806 "tftp $loadaddr $bootfile;" \ 807 "tftp $fdtaddr $fdtfile;" \ 808 "bootm $loadaddr - $fdtaddr" 809 810 #define CONFIG_NFSBOOTCOMMAND \ 811 "setenv bootargs root=/dev/nfs rw " \ 812 "nfsroot=$serverip:$rootpath " \ 813 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 814 "console=$consoledev,$baudrate $othbootargs;" \ 815 "tftp $loadaddr $bootfile;" \ 816 "tftp $fdtaddr $fdtfile;" \ 817 "bootm $loadaddr - $fdtaddr" 818 819 #define CONFIG_RAMBOOTCOMMAND \ 820 "setenv bootargs root=/dev/ram rw " \ 821 "console=$consoledev,$baudrate $othbootargs;" \ 822 "tftp $ramdiskaddr $ramdiskfile;" \ 823 "tftp $loadaddr $bootfile;" \ 824 "tftp $fdtaddr $fdtfile;" \ 825 "bootm $loadaddr $ramdiskaddr $fdtaddr" 826 827 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 828 829 #include <asm/fsl_secure_boot.h> 830 831 #endif /* __T208xQDS_H */ 832