1 /* 2 * Copyright 2011-2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T2080/T2081 QDS board configuration file 9 */ 10 11 #ifndef __T208xQDS_H 12 #define __T208xQDS_H 13 14 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 15 #define CONFIG_MMC 16 #define CONFIG_USB_EHCI 17 #if defined(CONFIG_ARCH_T2080) 18 #define CONFIG_T2080QDS 19 #define CONFIG_FSL_SATA_V2 20 #define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */ 21 #define CONFIG_SRIO1 /* SRIO port 1 */ 22 #define CONFIG_SRIO2 /* SRIO port 2 */ 23 #elif defined(CONFIG_ARCH_T2081) 24 #define CONFIG_T2081QDS 25 #endif 26 27 /* High Level Configuration Options */ 28 #define CONFIG_BOOKE 29 #define CONFIG_E500 /* BOOKE e500 family */ 30 #define CONFIG_E500MC /* BOOKE e500mc family */ 31 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 32 #define CONFIG_MP /* support multiple processors */ 33 #define CONFIG_ENABLE_36BIT_PHYS 34 35 #ifdef CONFIG_PHYS_64BIT 36 #define CONFIG_ADDR_MAP 1 37 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 38 #endif 39 40 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 41 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 42 #define CONFIG_FSL_IFC /* Enable IFC Support */ 43 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 44 #define CONFIG_ENV_OVERWRITE 45 46 #ifdef CONFIG_RAMBOOT_PBL 47 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg 48 49 #define CONFIG_SPL_FLUSH_IMAGE 50 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 51 #define CONFIG_SYS_TEXT_BASE 0x00201000 52 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 53 #define CONFIG_SPL_PAD_TO 0x40000 54 #define CONFIG_SPL_MAX_SIZE 0x28000 55 #define RESET_VECTOR_OFFSET 0x27FFC 56 #define BOOT_PAGE_OFFSET 0x27000 57 #ifdef CONFIG_SPL_BUILD 58 #define CONFIG_SPL_SKIP_RELOCATE 59 #define CONFIG_SPL_COMMON_INIT_DDR 60 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 61 #define CONFIG_SYS_NO_FLASH 62 #endif 63 64 #ifdef CONFIG_NAND 65 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 66 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 67 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 68 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 69 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 70 #if defined(CONFIG_ARCH_T2080) 71 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg 72 #elif defined(CONFIG_ARCH_T2081) 73 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg 74 #endif 75 #define CONFIG_SPL_NAND_BOOT 76 #endif 77 78 #ifdef CONFIG_SPIFLASH 79 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 80 #define CONFIG_SPL_SPI_FLASH_MINIMAL 81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 85 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 86 #ifndef CONFIG_SPL_BUILD 87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 88 #endif 89 #if defined(CONFIG_ARCH_T2080) 90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg 91 #elif defined(CONFIG_ARCH_T2081) 92 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg 93 #endif 94 #define CONFIG_SPL_SPI_BOOT 95 #endif 96 97 #ifdef CONFIG_SDCARD 98 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 99 #define CONFIG_SPL_MMC_MINIMAL 100 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 101 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 102 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 103 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 104 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 105 #ifndef CONFIG_SPL_BUILD 106 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 107 #endif 108 #if defined(CONFIG_ARCH_T2080) 109 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg 110 #elif defined(CONFIG_ARCH_T2081) 111 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg 112 #endif 113 #define CONFIG_SPL_MMC_BOOT 114 #endif 115 116 #endif /* CONFIG_RAMBOOT_PBL */ 117 118 #define CONFIG_SRIO_PCIE_BOOT_MASTER 119 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 120 /* Set 1M boot space */ 121 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 122 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 123 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 124 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 125 #define CONFIG_SYS_NO_FLASH 126 #endif 127 128 #ifndef CONFIG_SYS_TEXT_BASE 129 #define CONFIG_SYS_TEXT_BASE 0xeff40000 130 #endif 131 132 #ifndef CONFIG_RESET_VECTOR_ADDRESS 133 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 134 #endif 135 136 /* 137 * These can be toggled for performance analysis, otherwise use default. 138 */ 139 #define CONFIG_SYS_CACHE_STASHING 140 #define CONFIG_BTB /* toggle branch predition */ 141 #define CONFIG_DDR_ECC 142 #ifdef CONFIG_DDR_ECC 143 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 144 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 145 #endif 146 147 #ifndef CONFIG_SYS_NO_FLASH 148 #define CONFIG_FLASH_CFI_DRIVER 149 #define CONFIG_SYS_FLASH_CFI 150 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 151 #endif 152 153 #if defined(CONFIG_SPIFLASH) 154 #define CONFIG_SYS_EXTRA_ENV_RELOC 155 #define CONFIG_ENV_IS_IN_SPI_FLASH 156 #define CONFIG_ENV_SPI_BUS 0 157 #define CONFIG_ENV_SPI_CS 0 158 #define CONFIG_ENV_SPI_MAX_HZ 10000000 159 #define CONFIG_ENV_SPI_MODE 0 160 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 161 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 162 #define CONFIG_ENV_SECT_SIZE 0x10000 163 #elif defined(CONFIG_SDCARD) 164 #define CONFIG_SYS_EXTRA_ENV_RELOC 165 #define CONFIG_ENV_IS_IN_MMC 166 #define CONFIG_SYS_MMC_ENV_DEV 0 167 #define CONFIG_ENV_SIZE 0x2000 168 #define CONFIG_ENV_OFFSET (512 * 0x800) 169 #elif defined(CONFIG_NAND) 170 #define CONFIG_SYS_EXTRA_ENV_RELOC 171 #define CONFIG_ENV_IS_IN_NAND 172 #define CONFIG_ENV_SIZE 0x2000 173 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 174 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 175 #define CONFIG_ENV_IS_IN_REMOTE 176 #define CONFIG_ENV_ADDR 0xffe20000 177 #define CONFIG_ENV_SIZE 0x2000 178 #elif defined(CONFIG_ENV_IS_NOWHERE) 179 #define CONFIG_ENV_SIZE 0x2000 180 #else 181 #define CONFIG_ENV_IS_IN_FLASH 182 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 183 #define CONFIG_ENV_SIZE 0x2000 184 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 185 #endif 186 187 #ifndef __ASSEMBLY__ 188 unsigned long get_board_sys_clk(void); 189 unsigned long get_board_ddr_clk(void); 190 #endif 191 192 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 193 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 194 195 /* 196 * Config the L3 Cache as L3 SRAM 197 */ 198 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 199 #define CONFIG_SYS_L3_SIZE (512 << 10) 200 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 201 #ifdef CONFIG_RAMBOOT_PBL 202 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 203 #endif 204 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 205 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 206 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 207 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 208 209 #define CONFIG_SYS_DCSRBAR 0xf0000000 210 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 211 212 /* EEPROM */ 213 #define CONFIG_ID_EEPROM 214 #define CONFIG_SYS_I2C_EEPROM_NXID 215 #define CONFIG_SYS_EEPROM_BUS_NUM 0 216 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 217 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 218 219 /* 220 * DDR Setup 221 */ 222 #define CONFIG_VERY_BIG_RAM 223 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 224 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 225 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 226 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 227 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 228 #define CONFIG_DDR_SPD 229 #define CONFIG_SYS_FSL_DDR3 230 #define CONFIG_FSL_DDR_INTERACTIVE 231 #define CONFIG_SYS_SPD_BUS_NUM 0 232 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ 233 #define SPD_EEPROM_ADDRESS1 0x51 234 #define SPD_EEPROM_ADDRESS2 0x52 235 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 236 #define CTRL_INTLV_PREFERED cacheline 237 238 /* 239 * IFC Definitions 240 */ 241 #define CONFIG_SYS_FLASH_BASE 0xe0000000 242 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 243 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 244 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 245 + 0x8000000) | \ 246 CSPR_PORT_SIZE_16 | \ 247 CSPR_MSEL_NOR | \ 248 CSPR_V) 249 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 250 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 251 CSPR_PORT_SIZE_16 | \ 252 CSPR_MSEL_NOR | \ 253 CSPR_V) 254 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 255 /* NOR Flash Timing Params */ 256 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 257 258 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 259 FTIM0_NOR_TEADC(0x5) | \ 260 FTIM0_NOR_TEAHC(0x5)) 261 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 262 FTIM1_NOR_TRAD_NOR(0x1A) |\ 263 FTIM1_NOR_TSEQRAD_NOR(0x13)) 264 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 265 FTIM2_NOR_TCH(0x4) | \ 266 FTIM2_NOR_TWPH(0x0E) | \ 267 FTIM2_NOR_TWP(0x1c)) 268 #define CONFIG_SYS_NOR_FTIM3 0x0 269 270 #define CONFIG_SYS_FLASH_QUIET_TEST 271 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 272 273 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 274 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 275 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 276 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 277 278 #define CONFIG_SYS_FLASH_EMPTY_INFO 279 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 280 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 281 282 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 283 #define QIXIS_BASE 0xffdf0000 284 #define QIXIS_LBMAP_SWITCH 6 285 #define QIXIS_LBMAP_MASK 0x0f 286 #define QIXIS_LBMAP_SHIFT 0 287 #define QIXIS_LBMAP_DFLTBANK 0x00 288 #define QIXIS_LBMAP_ALTBANK 0x04 289 #define QIXIS_LBMAP_NAND 0x09 290 #define QIXIS_LBMAP_SD 0x00 291 #define QIXIS_RCW_SRC_NAND 0x104 292 #define QIXIS_RCW_SRC_SD 0x040 293 #define QIXIS_RST_CTL_RESET 0x83 294 #define QIXIS_RST_FORCE_MEM 0x1 295 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 296 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 297 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 298 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 299 300 #define CONFIG_SYS_CSPR3_EXT (0xf) 301 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 302 | CSPR_PORT_SIZE_8 \ 303 | CSPR_MSEL_GPCM \ 304 | CSPR_V) 305 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 306 #define CONFIG_SYS_CSOR3 0x0 307 /* QIXIS Timing parameters for IFC CS3 */ 308 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 309 FTIM0_GPCM_TEADC(0x0e) | \ 310 FTIM0_GPCM_TEAHC(0x0e)) 311 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 312 FTIM1_GPCM_TRAD(0x3f)) 313 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 314 FTIM2_GPCM_TCH(0x8) | \ 315 FTIM2_GPCM_TWP(0x1f)) 316 #define CONFIG_SYS_CS3_FTIM3 0x0 317 318 /* NAND Flash on IFC */ 319 #define CONFIG_NAND_FSL_IFC 320 #define CONFIG_SYS_NAND_BASE 0xff800000 321 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 322 323 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 324 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 325 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 326 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 327 | CSPR_V) 328 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 329 330 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 331 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 332 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 333 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 334 | CSOR_NAND_PGS_2K /* Page Size = 2K */\ 335 | CSOR_NAND_SPRZ_64 /* Spare size = 64 */\ 336 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 337 338 #define CONFIG_SYS_NAND_ONFI_DETECTION 339 340 /* ONFI NAND Flash mode0 Timing Params */ 341 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 342 FTIM0_NAND_TWP(0x18) | \ 343 FTIM0_NAND_TWCHT(0x07) | \ 344 FTIM0_NAND_TWH(0x0a)) 345 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 346 FTIM1_NAND_TWBE(0x39) | \ 347 FTIM1_NAND_TRR(0x0e) | \ 348 FTIM1_NAND_TRP(0x18)) 349 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 350 FTIM2_NAND_TREH(0x0a) | \ 351 FTIM2_NAND_TWHRE(0x1e)) 352 #define CONFIG_SYS_NAND_FTIM3 0x0 353 354 #define CONFIG_SYS_NAND_DDR_LAW 11 355 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 356 #define CONFIG_SYS_MAX_NAND_DEVICE 1 357 #define CONFIG_CMD_NAND 358 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 359 360 #if defined(CONFIG_NAND) 361 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 362 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 363 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 364 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 365 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 366 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 367 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 368 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 369 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 370 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 371 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 372 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 373 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 374 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 375 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 376 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 377 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 378 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 379 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 380 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 381 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 382 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 383 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 384 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 385 #else 386 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 387 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 388 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 389 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 390 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 391 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 392 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 393 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 394 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 395 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 396 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 397 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 398 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 399 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 400 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 401 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 402 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 403 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 404 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 405 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 406 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 407 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 408 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 409 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 410 #endif 411 412 #if defined(CONFIG_RAMBOOT_PBL) 413 #define CONFIG_SYS_RAMBOOT 414 #endif 415 416 #ifdef CONFIG_SPL_BUILD 417 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 418 #else 419 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 420 #endif 421 422 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 423 #define CONFIG_MISC_INIT_R 424 #define CONFIG_HWCONFIG 425 426 /* define to use L1 as initial stack */ 427 #define CONFIG_L1_INIT_RAM 428 #define CONFIG_SYS_INIT_RAM_LOCK 429 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 432 /* The assembler doesn't like typecast */ 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 434 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 435 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 436 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 437 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 438 GENERATED_GBL_DATA_SIZE) 439 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 440 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 441 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 442 443 /* 444 * Serial Port 445 */ 446 #define CONFIG_CONS_INDEX 1 447 #define CONFIG_SYS_NS16550_SERIAL 448 #define CONFIG_SYS_NS16550_REG_SIZE 1 449 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 450 #define CONFIG_SYS_BAUDRATE_TABLE \ 451 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 452 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 453 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 454 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 455 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 456 457 /* 458 * I2C 459 */ 460 #define CONFIG_SYS_I2C 461 #define CONFIG_SYS_I2C_FSL 462 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 463 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 464 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 465 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 466 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 467 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 468 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 469 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 470 #define CONFIG_SYS_FSL_I2C_SPEED 100000 471 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 472 #define CONFIG_SYS_FSL_I2C3_SPEED 100000 473 #define CONFIG_SYS_FSL_I2C4_SPEED 100000 474 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 475 #define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ 476 #define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */ 477 #define I2C_MUX_CH_DEFAULT 0x8 478 479 #define I2C_MUX_CH_VOL_MONITOR 0xa 480 481 /* Voltage monitor on channel 2*/ 482 #define I2C_VOL_MONITOR_ADDR 0x40 483 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 484 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 485 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 486 487 #define CONFIG_VID_FLS_ENV "t208xqds_vdd_mv" 488 #ifndef CONFIG_SPL_BUILD 489 #define CONFIG_VID 490 #endif 491 #define CONFIG_VOL_MONITOR_IR36021_SET 492 #define CONFIG_VOL_MONITOR_IR36021_READ 493 /* The lowest and highest voltage allowed for T208xQDS */ 494 #define VDD_MV_MIN 819 495 #define VDD_MV_MAX 1212 496 497 /* 498 * RapidIO 499 */ 500 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 501 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 502 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 503 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 504 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 505 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 506 /* 507 * for slave u-boot IMAGE instored in master memory space, 508 * PHYS must be aligned based on the SIZE 509 */ 510 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 511 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 512 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 513 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 514 /* 515 * for slave UCODE and ENV instored in master memory space, 516 * PHYS must be aligned based on the SIZE 517 */ 518 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 519 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 520 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 521 522 /* slave core release by master*/ 523 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 524 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 525 526 /* 527 * SRIO_PCIE_BOOT - SLAVE 528 */ 529 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 530 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 531 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 532 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 533 #endif 534 535 /* 536 * eSPI - Enhanced SPI 537 */ 538 #ifdef CONFIG_SPI_FLASH 539 #ifndef CONFIG_SPL_BUILD 540 #endif 541 542 #define CONFIG_SPI_FLASH_BAR 543 #define CONFIG_SF_DEFAULT_SPEED 10000000 544 #define CONFIG_SF_DEFAULT_MODE 0 545 #endif 546 547 /* 548 * General PCI 549 * Memory space is mapped 1-1, but I/O space must start from 0. 550 */ 551 #define CONFIG_PCIE1 /* PCIE controller 1 */ 552 #define CONFIG_PCIE2 /* PCIE controller 2 */ 553 #define CONFIG_PCIE3 /* PCIE controller 3 */ 554 #define CONFIG_PCIE4 /* PCIE controller 4 */ 555 #define CONFIG_FSL_PCIE_RESET 556 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 557 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 558 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 559 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 560 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 561 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 562 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 563 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 564 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 565 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 566 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 567 568 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 569 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 570 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 571 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 572 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 573 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 574 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 575 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 576 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 577 578 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 579 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 580 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 581 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc30000000ull 582 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 583 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 584 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 585 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 586 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 587 588 /* controller 4, Base address 203000 */ 589 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xc0000000 590 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 591 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull 592 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 593 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 594 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 595 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 596 597 #ifdef CONFIG_PCI 598 #define CONFIG_PCI_INDIRECT_BRIDGE 599 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 600 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 601 #define CONFIG_DOS_PARTITION 602 #endif 603 604 /* Qman/Bman */ 605 #ifndef CONFIG_NOBQFMAN 606 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 607 #define CONFIG_SYS_BMAN_NUM_PORTALS 18 608 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 609 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 610 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 611 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 612 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 613 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 614 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 615 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 616 CONFIG_SYS_BMAN_CENA_SIZE) 617 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 618 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 619 #define CONFIG_SYS_QMAN_NUM_PORTALS 18 620 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 621 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 622 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 623 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 624 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 625 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 626 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 627 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 628 CONFIG_SYS_QMAN_CENA_SIZE) 629 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 630 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 631 632 #define CONFIG_SYS_DPAA_FMAN 633 #define CONFIG_SYS_DPAA_PME 634 #define CONFIG_SYS_PMAN 635 #define CONFIG_SYS_DPAA_DCE 636 #define CONFIG_SYS_DPAA_RMAN /* RMan */ 637 #define CONFIG_SYS_INTERLAKEN 638 639 /* Default address of microcode for the Linux Fman driver */ 640 #if defined(CONFIG_SPIFLASH) 641 /* 642 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 643 * env, so we got 0x110000. 644 */ 645 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 646 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 647 #elif defined(CONFIG_SDCARD) 648 /* 649 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 650 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 651 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 652 */ 653 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 654 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 655 #elif defined(CONFIG_NAND) 656 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 657 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 658 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 659 /* 660 * Slave has no ucode locally, it can fetch this from remote. When implementing 661 * in two corenet boards, slave's ucode could be stored in master's memory 662 * space, the address can be mapped from slave TLB->slave LAW-> 663 * slave SRIO or PCIE outbound window->master inbound window-> 664 * master LAW->the ucode address in master's memory space. 665 */ 666 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 667 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 668 #else 669 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 670 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 671 #endif 672 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 673 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 674 #endif /* CONFIG_NOBQFMAN */ 675 676 #ifdef CONFIG_SYS_DPAA_FMAN 677 #define CONFIG_FMAN_ENET 678 #define CONFIG_PHYLIB_10G 679 #define CONFIG_PHY_VITESSE 680 #define CONFIG_PHY_REALTEK 681 #define CONFIG_PHY_TERANETICS 682 #define RGMII_PHY1_ADDR 0x1 683 #define RGMII_PHY2_ADDR 0x2 684 #define FM1_10GEC1_PHY_ADDR 0x3 685 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 686 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 687 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 688 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 689 #endif 690 691 #ifdef CONFIG_FMAN_ENET 692 #define CONFIG_MII /* MII PHY management */ 693 #define CONFIG_ETHPRIME "FM1@DTSEC3" 694 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 695 #endif 696 697 /* 698 * SATA 699 */ 700 #ifdef CONFIG_FSL_SATA_V2 701 #define CONFIG_LIBATA 702 #define CONFIG_FSL_SATA 703 #define CONFIG_SYS_SATA_MAX_DEVICE 2 704 #define CONFIG_SATA1 705 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 706 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 707 #define CONFIG_SATA2 708 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 709 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 710 #define CONFIG_LBA48 711 #define CONFIG_CMD_SATA 712 #define CONFIG_DOS_PARTITION 713 #endif 714 715 /* 716 * USB 717 */ 718 #ifdef CONFIG_USB_EHCI 719 #define CONFIG_USB_EHCI_FSL 720 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 721 #define CONFIG_HAS_FSL_DR_USB 722 #endif 723 724 /* 725 * SDHC 726 */ 727 #ifdef CONFIG_MMC 728 #define CONFIG_FSL_ESDHC 729 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK 730 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 731 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 732 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 733 #define CONFIG_GENERIC_MMC 734 #define CONFIG_DOS_PARTITION 735 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT 736 #endif 737 738 /* 739 * Dynamic MTD Partition support with mtdparts 740 */ 741 #ifndef CONFIG_SYS_NO_FLASH 742 #define CONFIG_MTD_DEVICE 743 #define CONFIG_MTD_PARTITIONS 744 #define CONFIG_CMD_MTDPARTS 745 #define CONFIG_FLASH_CFI_MTD 746 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 747 "spi0=spife110000.0" 748 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 749 "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ 750 "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ 751 "1m(uboot),5m(kernel),128k(dtb),-(user)" 752 #endif 753 754 /* 755 * Environment 756 */ 757 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 758 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 759 760 /* 761 * Command line configuration. 762 */ 763 #define CONFIG_CMD_ERRATA 764 #define CONFIG_CMD_IRQ 765 #define CONFIG_CMD_REGINFO 766 767 #ifdef CONFIG_PCI 768 #define CONFIG_CMD_PCI 769 #endif 770 771 /* Hash command with SHA acceleration supported in hardware */ 772 #ifdef CONFIG_FSL_CAAM 773 #define CONFIG_CMD_HASH 774 #define CONFIG_SHA_HW_ACCEL 775 #endif 776 777 /* 778 * Miscellaneous configurable options 779 */ 780 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 781 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 782 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 783 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 784 #ifdef CONFIG_CMD_KGDB 785 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 786 #else 787 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 788 #endif 789 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 790 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 791 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 792 793 /* 794 * For booting Linux, the board info and command line data 795 * have to be in the first 64 MB of memory, since this is 796 * the maximum mapped by the Linux kernel during initialization. 797 */ 798 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 799 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 800 801 #ifdef CONFIG_CMD_KGDB 802 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 803 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 804 #endif 805 806 /* 807 * Environment Configuration 808 */ 809 #define CONFIG_ROOTPATH "/opt/nfsroot" 810 #define CONFIG_BOOTFILE "uImage" 811 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 812 813 /* default location for tftp and bootm */ 814 #define CONFIG_LOADADDR 1000000 815 #define CONFIG_BAUDRATE 115200 816 #define __USB_PHY_TYPE utmi 817 818 #define CONFIG_EXTRA_ENV_SETTINGS \ 819 "hwconfig=fsl_ddr:" \ 820 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 821 "bank_intlv=auto;" \ 822 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 823 "netdev=eth0\0" \ 824 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 825 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 826 "tftpflash=tftpboot $loadaddr $uboot && " \ 827 "protect off $ubootaddr +$filesize && " \ 828 "erase $ubootaddr +$filesize && " \ 829 "cp.b $loadaddr $ubootaddr $filesize && " \ 830 "protect on $ubootaddr +$filesize && " \ 831 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 832 "consoledev=ttyS0\0" \ 833 "ramdiskaddr=2000000\0" \ 834 "ramdiskfile=t2080qds/ramdisk.uboot\0" \ 835 "fdtaddr=1e00000\0" \ 836 "fdtfile=t2080qds/t2080qds.dtb\0" \ 837 "bdev=sda3\0" 838 839 /* 840 * For emulation this causes u-boot to jump to the start of the 841 * proof point app code automatically 842 */ 843 #define CONFIG_PROOF_POINTS \ 844 "setenv bootargs root=/dev/$bdev rw " \ 845 "console=$consoledev,$baudrate $othbootargs;" \ 846 "cpu 1 release 0x29000000 - - -;" \ 847 "cpu 2 release 0x29000000 - - -;" \ 848 "cpu 3 release 0x29000000 - - -;" \ 849 "cpu 4 release 0x29000000 - - -;" \ 850 "cpu 5 release 0x29000000 - - -;" \ 851 "cpu 6 release 0x29000000 - - -;" \ 852 "cpu 7 release 0x29000000 - - -;" \ 853 "go 0x29000000" 854 855 #define CONFIG_HVBOOT \ 856 "setenv bootargs config-addr=0x60000000; " \ 857 "bootm 0x01000000 - 0x00f00000" 858 859 #define CONFIG_ALU \ 860 "setenv bootargs root=/dev/$bdev rw " \ 861 "console=$consoledev,$baudrate $othbootargs;" \ 862 "cpu 1 release 0x01000000 - - -;" \ 863 "cpu 2 release 0x01000000 - - -;" \ 864 "cpu 3 release 0x01000000 - - -;" \ 865 "cpu 4 release 0x01000000 - - -;" \ 866 "cpu 5 release 0x01000000 - - -;" \ 867 "cpu 6 release 0x01000000 - - -;" \ 868 "cpu 7 release 0x01000000 - - -;" \ 869 "go 0x01000000" 870 871 #define CONFIG_LINUX \ 872 "setenv bootargs root=/dev/ram rw " \ 873 "console=$consoledev,$baudrate $othbootargs;" \ 874 "setenv ramdiskaddr 0x02000000;" \ 875 "setenv fdtaddr 0x00c00000;" \ 876 "setenv loadaddr 0x1000000;" \ 877 "bootm $loadaddr $ramdiskaddr $fdtaddr" 878 879 #define CONFIG_HDBOOT \ 880 "setenv bootargs root=/dev/$bdev rw " \ 881 "console=$consoledev,$baudrate $othbootargs;" \ 882 "tftp $loadaddr $bootfile;" \ 883 "tftp $fdtaddr $fdtfile;" \ 884 "bootm $loadaddr - $fdtaddr" 885 886 #define CONFIG_NFSBOOTCOMMAND \ 887 "setenv bootargs root=/dev/nfs rw " \ 888 "nfsroot=$serverip:$rootpath " \ 889 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 890 "console=$consoledev,$baudrate $othbootargs;" \ 891 "tftp $loadaddr $bootfile;" \ 892 "tftp $fdtaddr $fdtfile;" \ 893 "bootm $loadaddr - $fdtaddr" 894 895 #define CONFIG_RAMBOOTCOMMAND \ 896 "setenv bootargs root=/dev/ram rw " \ 897 "console=$consoledev,$baudrate $othbootargs;" \ 898 "tftp $ramdiskaddr $ramdiskfile;" \ 899 "tftp $loadaddr $bootfile;" \ 900 "tftp $fdtaddr $fdtfile;" \ 901 "bootm $loadaddr $ramdiskaddr $fdtaddr" 902 903 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 904 905 #include <asm/fsl_secure_boot.h> 906 907 #endif /* __T208xQDS_H */ 908