1 /* 2 + * Copyright 2014 Freescale Semiconductor, Inc. 3 + * 4 + * SPDX-License-Identifier: GPL-2.0+ 5 + */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 /* 11 * T104x RDB board configuration file 12 */ 13 #define CONFIG_T104xRDB 14 #define CONFIG_PHYS_64BIT 15 #define CONFIG_DISPLAY_BOARDINFO 16 17 #define CONFIG_E500 /* BOOKE e500 family */ 18 #include <asm/config_mpc85xx.h> 19 20 #ifdef CONFIG_RAMBOOT_PBL 21 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg 22 #ifdef CONFIG_T1040RDB 23 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg 24 #endif 25 #ifdef CONFIG_T1042RDB_PI 26 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg 27 #endif 28 #ifdef CONFIG_T1042RDB 29 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg 30 #endif 31 #ifdef CONFIG_T1040D4RDB 32 #define CONFIG_SYS_FSL_PBL_RCW \ 33 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg 34 #endif 35 #ifdef CONFIG_T1042D4RDB 36 #define CONFIG_SYS_FSL_PBL_RCW \ 37 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg 38 #endif 39 40 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 41 #define CONFIG_SPL_ENV_SUPPORT 42 #define CONFIG_SPL_SERIAL_SUPPORT 43 #define CONFIG_SPL_FLUSH_IMAGE 44 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 45 #define CONFIG_SPL_LIBGENERIC_SUPPORT 46 #define CONFIG_SPL_LIBCOMMON_SUPPORT 47 #define CONFIG_SPL_I2C_SUPPORT 48 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 49 #define CONFIG_FSL_LAW /* Use common FSL init code */ 50 #define CONFIG_SYS_TEXT_BASE 0x30001000 51 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 52 #define CONFIG_SPL_PAD_TO 0x40000 53 #define CONFIG_SPL_MAX_SIZE 0x28000 54 #ifdef CONFIG_SPL_BUILD 55 #define CONFIG_SPL_SKIP_RELOCATE 56 #define CONFIG_SPL_COMMON_INIT_DDR 57 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 58 #define CONFIG_SYS_NO_FLASH 59 #endif 60 #define RESET_VECTOR_OFFSET 0x27FFC 61 #define BOOT_PAGE_OFFSET 0x27000 62 63 #ifdef CONFIG_NAND 64 #define CONFIG_SPL_NAND_SUPPORT 65 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 66 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 67 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 68 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 69 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 70 #define CONFIG_SPL_NAND_BOOT 71 #endif 72 73 #ifdef CONFIG_SPIFLASH 74 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 75 #define CONFIG_SPL_SPI_SUPPORT 76 #define CONFIG_SPL_SPI_FLASH_SUPPORT 77 #define CONFIG_SPL_SPI_FLASH_MINIMAL 78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 82 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 83 #ifndef CONFIG_SPL_BUILD 84 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 85 #endif 86 #define CONFIG_SPL_SPI_BOOT 87 #endif 88 89 #ifdef CONFIG_SDCARD 90 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 91 #define CONFIG_SPL_MMC_SUPPORT 92 #define CONFIG_SPL_MMC_MINIMAL 93 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 94 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 95 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 96 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 97 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 98 #ifndef CONFIG_SPL_BUILD 99 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 100 #endif 101 #define CONFIG_SPL_MMC_BOOT 102 #endif 103 104 #endif 105 106 /* High Level Configuration Options */ 107 #define CONFIG_BOOKE 108 #define CONFIG_E500MC /* BOOKE e500mc family */ 109 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 110 #define CONFIG_MP /* support multiple processors */ 111 112 /* support deep sleep */ 113 #define CONFIG_DEEP_SLEEP 114 #if defined(CONFIG_DEEP_SLEEP) 115 #define CONFIG_BOARD_EARLY_INIT_F 116 #define CONFIG_SILENT_CONSOLE 117 #endif 118 119 #ifndef CONFIG_SYS_TEXT_BASE 120 #define CONFIG_SYS_TEXT_BASE 0xeff40000 121 #endif 122 123 #ifndef CONFIG_RESET_VECTOR_ADDRESS 124 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 125 #endif 126 127 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 128 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 129 #define CONFIG_FSL_IFC /* Enable IFC Support */ 130 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 131 #define CONFIG_PCI /* Enable PCI/PCIE */ 132 #define CONFIG_PCI_INDIRECT_BRIDGE 133 #define CONFIG_PCIE1 /* PCIE controller 1 */ 134 #define CONFIG_PCIE2 /* PCIE controller 2 */ 135 #define CONFIG_PCIE3 /* PCIE controller 3 */ 136 #define CONFIG_PCIE4 /* PCIE controller 4 */ 137 138 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 139 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 140 141 #define CONFIG_FSL_LAW /* Use common FSL init code */ 142 143 #define CONFIG_ENV_OVERWRITE 144 145 #ifndef CONFIG_SYS_NO_FLASH 146 #define CONFIG_FLASH_CFI_DRIVER 147 #define CONFIG_SYS_FLASH_CFI 148 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 149 #endif 150 151 #if defined(CONFIG_SPIFLASH) 152 #define CONFIG_SYS_EXTRA_ENV_RELOC 153 #define CONFIG_ENV_IS_IN_SPI_FLASH 154 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 155 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 156 #define CONFIG_ENV_SECT_SIZE 0x10000 157 #elif defined(CONFIG_SDCARD) 158 #define CONFIG_SYS_EXTRA_ENV_RELOC 159 #define CONFIG_ENV_IS_IN_MMC 160 #define CONFIG_SYS_MMC_ENV_DEV 0 161 #define CONFIG_ENV_SIZE 0x2000 162 #define CONFIG_ENV_OFFSET (512 * 0x800) 163 #elif defined(CONFIG_NAND) 164 #define CONFIG_SYS_EXTRA_ENV_RELOC 165 #define CONFIG_ENV_IS_IN_NAND 166 #define CONFIG_ENV_SIZE 0x2000 167 #define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 168 #else 169 #define CONFIG_ENV_IS_IN_FLASH 170 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 171 #define CONFIG_ENV_SIZE 0x2000 172 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 173 #endif 174 175 #define CONFIG_SYS_CLK_FREQ 100000000 176 #define CONFIG_DDR_CLK_FREQ 66666666 177 178 /* 179 * These can be toggled for performance analysis, otherwise use default. 180 */ 181 #define CONFIG_SYS_CACHE_STASHING 182 #define CONFIG_BACKSIDE_L2_CACHE 183 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 184 #define CONFIG_BTB /* toggle branch predition */ 185 #define CONFIG_DDR_ECC 186 #ifdef CONFIG_DDR_ECC 187 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 188 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 189 #endif 190 191 #define CONFIG_ENABLE_36BIT_PHYS 192 193 #define CONFIG_ADDR_MAP 194 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 195 196 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 197 #define CONFIG_SYS_MEMTEST_END 0x00400000 198 #define CONFIG_SYS_ALT_MEMTEST 199 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 200 201 /* 202 * Config the L3 Cache as L3 SRAM 203 */ 204 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 205 #define CONFIG_SYS_L3_SIZE 256 << 10 206 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 207 #ifdef CONFIG_RAMBOOT_PBL 208 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 209 #endif 210 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 211 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 212 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 213 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 214 215 #define CONFIG_SYS_DCSRBAR 0xf0000000 216 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 217 218 /* 219 * DDR Setup 220 */ 221 #define CONFIG_VERY_BIG_RAM 222 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 223 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 224 225 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 226 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 227 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 228 229 #define CONFIG_DDR_SPD 230 #ifndef CONFIG_SYS_FSL_DDR4 231 #define CONFIG_SYS_FSL_DDR3 232 #endif 233 234 #define CONFIG_SYS_SPD_BUS_NUM 0 235 #define SPD_EEPROM_ADDRESS 0x51 236 237 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 238 239 /* 240 * IFC Definitions 241 */ 242 #define CONFIG_SYS_FLASH_BASE 0xe8000000 243 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 244 245 #define CONFIG_SYS_NOR_CSPR_EXT (0xf) 246 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ 247 CSPR_PORT_SIZE_16 | \ 248 CSPR_MSEL_NOR | \ 249 CSPR_V) 250 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 251 252 /* 253 * TDM Definition 254 */ 255 #define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 256 257 /* NOR Flash Timing Params */ 258 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 259 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 260 FTIM0_NOR_TEADC(0x5) | \ 261 FTIM0_NOR_TEAHC(0x5)) 262 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 263 FTIM1_NOR_TRAD_NOR(0x1A) |\ 264 FTIM1_NOR_TSEQRAD_NOR(0x13)) 265 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 266 FTIM2_NOR_TCH(0x4) | \ 267 FTIM2_NOR_TWPH(0x0E) | \ 268 FTIM2_NOR_TWP(0x1c)) 269 #define CONFIG_SYS_NOR_FTIM3 0x0 270 271 #define CONFIG_SYS_FLASH_QUIET_TEST 272 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 273 274 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 275 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 276 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 277 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 278 279 #define CONFIG_SYS_FLASH_EMPTY_INFO 280 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 281 282 /* CPLD on IFC */ 283 #define CPLD_LBMAP_MASK 0x3F 284 #define CPLD_BANK_SEL_MASK 0x07 285 #define CPLD_BANK_OVERRIDE 0x40 286 #define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */ 287 #define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK0 */ 288 #define CPLD_LBMAP_RESET 0xFF 289 #define CPLD_LBMAP_SHIFT 0x03 290 291 #if defined(CONFIG_T1042RDB_PI) 292 #define CPLD_DIU_SEL_DFP 0x80 293 #elif defined(CONFIG_T1042D4RDB) 294 #define CPLD_DIU_SEL_DFP 0xc0 295 #endif 296 297 #if defined(CONFIG_T1040D4RDB) 298 #define CPLD_INT_MASK_ALL 0xFF 299 #define CPLD_INT_MASK_THERM 0x80 300 #define CPLD_INT_MASK_DVI_DFP 0x40 301 #define CPLD_INT_MASK_QSGMII1 0x20 302 #define CPLD_INT_MASK_QSGMII2 0x10 303 #define CPLD_INT_MASK_SGMI1 0x08 304 #define CPLD_INT_MASK_SGMI2 0x04 305 #define CPLD_INT_MASK_TDMR1 0x02 306 #define CPLD_INT_MASK_TDMR2 0x01 307 #endif 308 309 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 310 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 311 #define CONFIG_SYS_CSPR2_EXT (0xf) 312 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 313 | CSPR_PORT_SIZE_8 \ 314 | CSPR_MSEL_GPCM \ 315 | CSPR_V) 316 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 317 #define CONFIG_SYS_CSOR2 0x0 318 /* CPLD Timing parameters for IFC CS2 */ 319 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 320 FTIM0_GPCM_TEADC(0x0e) | \ 321 FTIM0_GPCM_TEAHC(0x0e)) 322 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 323 FTIM1_GPCM_TRAD(0x1f)) 324 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 325 FTIM2_GPCM_TCH(0x8) | \ 326 FTIM2_GPCM_TWP(0x1f)) 327 #define CONFIG_SYS_CS2_FTIM3 0x0 328 329 /* NAND Flash on IFC */ 330 #define CONFIG_NAND_FSL_IFC 331 #define CONFIG_SYS_NAND_BASE 0xff800000 332 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 333 334 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 335 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 336 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 337 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 338 | CSPR_V) 339 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 340 341 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 342 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 343 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 344 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 345 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 346 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \ 347 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 348 349 #define CONFIG_SYS_NAND_ONFI_DETECTION 350 351 /* ONFI NAND Flash mode0 Timing Params */ 352 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 353 FTIM0_NAND_TWP(0x18) | \ 354 FTIM0_NAND_TWCHT(0x07) | \ 355 FTIM0_NAND_TWH(0x0a)) 356 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 357 FTIM1_NAND_TWBE(0x39) | \ 358 FTIM1_NAND_TRR(0x0e) | \ 359 FTIM1_NAND_TRP(0x18)) 360 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 361 FTIM2_NAND_TREH(0x0a) | \ 362 FTIM2_NAND_TWHRE(0x1e)) 363 #define CONFIG_SYS_NAND_FTIM3 0x0 364 365 #define CONFIG_SYS_NAND_DDR_LAW 11 366 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 367 #define CONFIG_SYS_MAX_NAND_DEVICE 1 368 #define CONFIG_CMD_NAND 369 370 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 371 372 #if defined(CONFIG_NAND) 373 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 374 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 375 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 376 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 377 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 378 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 379 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 380 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 381 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT 382 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 383 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 384 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 385 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 386 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 387 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 388 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 389 #else 390 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT 391 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 392 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 393 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 394 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 395 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 396 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 397 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 398 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 399 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 400 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 401 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 402 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 403 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 404 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 405 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 406 #endif 407 408 #ifdef CONFIG_SPL_BUILD 409 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 410 #else 411 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 412 #endif 413 414 #if defined(CONFIG_RAMBOOT_PBL) 415 #define CONFIG_SYS_RAMBOOT 416 #endif 417 418 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044 419 #if defined(CONFIG_NAND) 420 #define CONFIG_A008044_WORKAROUND 421 #endif 422 #endif 423 424 #define CONFIG_BOARD_EARLY_INIT_R 425 #define CONFIG_MISC_INIT_R 426 427 #define CONFIG_HWCONFIG 428 429 /* define to use L1 as initial stack */ 430 #define CONFIG_L1_INIT_RAM 431 #define CONFIG_SYS_INIT_RAM_LOCK 432 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 434 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 435 /* The assembler doesn't like typecast */ 436 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 437 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 438 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 439 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 440 441 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 442 GENERATED_GBL_DATA_SIZE) 443 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 444 445 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 446 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 447 448 /* Serial Port - controlled on board with jumper J8 449 * open - index 2 450 * shorted - index 1 451 */ 452 #define CONFIG_CONS_INDEX 1 453 #define CONFIG_SYS_NS16550_SERIAL 454 #define CONFIG_SYS_NS16550_REG_SIZE 1 455 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 456 457 #define CONFIG_SYS_BAUDRATE_TABLE \ 458 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 459 460 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 461 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 462 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 463 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 464 #ifndef CONFIG_SPL_BUILD 465 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 466 #endif 467 468 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB) 469 /* Video */ 470 #define CONFIG_FSL_DIU_FB 471 472 #ifdef CONFIG_FSL_DIU_FB 473 #define CONFIG_FSL_DIU_CH7301 474 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 475 #define CONFIG_VIDEO 476 #define CONFIG_CMD_BMP 477 #define CONFIG_CFB_CONSOLE 478 #define CONFIG_CFB_CONSOLE_ANSI 479 #define CONFIG_VIDEO_SW_CURSOR 480 #define CONFIG_VGA_AS_SINGLE_DEVICE 481 #define CONFIG_VIDEO_LOGO 482 #define CONFIG_VIDEO_BMP_LOGO 483 #endif 484 #endif 485 486 /* I2C */ 487 #define CONFIG_SYS_I2C 488 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 489 #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ 490 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 491 #define CONFIG_SYS_FSL_I2C3_SPEED 400000 492 #define CONFIG_SYS_FSL_I2C4_SPEED 400000 493 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 494 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 495 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 496 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 497 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 498 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 499 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 500 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 501 502 /* I2C bus multiplexer */ 503 #define I2C_MUX_PCA_ADDR 0x70 504 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB) 505 #define I2C_MUX_CH_DEFAULT 0x8 506 #endif 507 508 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB) 509 /* LDI/DVI Encoder for display */ 510 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 511 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 512 513 /* 514 * RTC configuration 515 */ 516 #define RTC 517 #define CONFIG_RTC_DS1337 1 518 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 519 520 /*DVI encoder*/ 521 #define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 522 #endif 523 524 /* 525 * eSPI - Enhanced SPI 526 */ 527 #define CONFIG_SPI_FLASH_BAR 528 #define CONFIG_SF_DEFAULT_SPEED 10000000 529 #define CONFIG_SF_DEFAULT_MODE 0 530 #define CONFIG_ENV_SPI_BUS 0 531 #define CONFIG_ENV_SPI_CS 0 532 #define CONFIG_ENV_SPI_MAX_HZ 10000000 533 #define CONFIG_ENV_SPI_MODE 0 534 535 /* 536 * General PCI 537 * Memory space is mapped 1-1, but I/O space must start from 0. 538 */ 539 540 #ifdef CONFIG_PCI 541 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 542 #ifdef CONFIG_PCIE1 543 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 544 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 545 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 546 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 547 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 548 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 549 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 550 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 551 #endif 552 553 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 554 #ifdef CONFIG_PCIE2 555 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 556 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 557 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 558 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 559 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 560 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 561 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 562 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 563 #endif 564 565 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 566 #ifdef CONFIG_PCIE3 567 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 568 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 569 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 570 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 571 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 572 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 573 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 574 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 575 #endif 576 577 /* controller 4, Base address 203000 */ 578 #ifdef CONFIG_PCIE4 579 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 580 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 581 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 582 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 583 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 584 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 585 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 586 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 587 #endif 588 589 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 590 591 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 592 #define CONFIG_DOS_PARTITION 593 #endif /* CONFIG_PCI */ 594 595 /* SATA */ 596 #define CONFIG_FSL_SATA_V2 597 #ifdef CONFIG_FSL_SATA_V2 598 #define CONFIG_LIBATA 599 #define CONFIG_FSL_SATA 600 601 #define CONFIG_SYS_SATA_MAX_DEVICE 1 602 #define CONFIG_SATA1 603 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 604 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 605 606 #define CONFIG_LBA48 607 #define CONFIG_CMD_SATA 608 #define CONFIG_DOS_PARTITION 609 #endif 610 611 /* 612 * USB 613 */ 614 #define CONFIG_HAS_FSL_DR_USB 615 616 #ifdef CONFIG_HAS_FSL_DR_USB 617 #define CONFIG_USB_EHCI 618 619 #ifdef CONFIG_USB_EHCI 620 #define CONFIG_USB_STORAGE 621 #define CONFIG_USB_EHCI_FSL 622 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 623 #endif 624 #endif 625 626 #define CONFIG_MMC 627 628 #ifdef CONFIG_MMC 629 #define CONFIG_FSL_ESDHC 630 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 631 #define CONFIG_GENERIC_MMC 632 #define CONFIG_DOS_PARTITION 633 #endif 634 635 /* Qman/Bman */ 636 #ifndef CONFIG_NOBQFMAN 637 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 638 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 639 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 640 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 641 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 642 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 643 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 644 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 645 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 646 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 647 CONFIG_SYS_BMAN_CENA_SIZE) 648 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 649 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 650 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 651 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 652 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 653 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 654 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 655 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 656 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 657 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 658 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 659 CONFIG_SYS_QMAN_CENA_SIZE) 660 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 661 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 662 663 #define CONFIG_SYS_DPAA_FMAN 664 #define CONFIG_SYS_DPAA_PME 665 666 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB) 667 #define CONFIG_QE 668 #define CONFIG_U_QE 669 #endif 670 671 /* Default address of microcode for the Linux Fman driver */ 672 #if defined(CONFIG_SPIFLASH) 673 /* 674 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 675 * env, so we got 0x110000. 676 */ 677 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 678 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 679 #elif defined(CONFIG_SDCARD) 680 /* 681 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 682 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 683 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 684 */ 685 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 686 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 687 #elif defined(CONFIG_NAND) 688 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 689 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 690 #else 691 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 692 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 693 #endif 694 695 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB) 696 #if defined(CONFIG_SPIFLASH) 697 #define CONFIG_SYS_QE_FW_ADDR 0x130000 698 #elif defined(CONFIG_SDCARD) 699 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 700 #elif defined(CONFIG_NAND) 701 #define CONFIG_SYS_QE_FW_ADDR (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 702 #else 703 #define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 704 #endif 705 #endif 706 707 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 708 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 709 #endif /* CONFIG_NOBQFMAN */ 710 711 #ifdef CONFIG_SYS_DPAA_FMAN 712 #define CONFIG_FMAN_ENET 713 #define CONFIG_PHY_VITESSE 714 #define CONFIG_PHY_REALTEK 715 #endif 716 717 #ifdef CONFIG_FMAN_ENET 718 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) 719 #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 720 #elif defined(CONFIG_T1040D4RDB) 721 #define CONFIG_SYS_SGMII1_PHY_ADDR 0x01 722 #elif defined(CONFIG_T1042D4RDB) 723 #define CONFIG_SYS_SGMII1_PHY_ADDR 0x02 724 #define CONFIG_SYS_SGMII2_PHY_ADDR 0x03 725 #define CONFIG_SYS_SGMII3_PHY_ADDR 0x01 726 #endif 727 728 #ifdef CONFIG_T104XD4RDB 729 #define CONFIG_SYS_RGMII1_PHY_ADDR 0x04 730 #define CONFIG_SYS_RGMII2_PHY_ADDR 0x05 731 #else 732 #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 733 #define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 734 #endif 735 736 /* Enable VSC9953 L2 Switch driver on T1040 SoC */ 737 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB) 738 #define CONFIG_VSC9953 739 #define CONFIG_CMD_ETHSW 740 #ifdef CONFIG_T1040RDB 741 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 742 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 743 #else 744 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 745 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c 746 #endif 747 #endif 748 749 #define CONFIG_MII /* MII PHY management */ 750 #define CONFIG_ETHPRIME "FM1@DTSEC4" 751 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 752 #endif 753 754 /* 755 * Environment 756 */ 757 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 758 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 759 760 /* 761 * Command line configuration. 762 */ 763 #ifdef CONFIG_T1042RDB_PI 764 #define CONFIG_CMD_DATE 765 #endif 766 #define CONFIG_CMD_ERRATA 767 #define CONFIG_CMD_IRQ 768 #define CONFIG_CMD_REGINFO 769 770 #ifdef CONFIG_PCI 771 #define CONFIG_CMD_PCI 772 #endif 773 774 /* Hash command with SHA acceleration supported in hardware */ 775 #ifdef CONFIG_FSL_CAAM 776 #define CONFIG_CMD_HASH 777 #define CONFIG_SHA_HW_ACCEL 778 #endif 779 780 /* 781 * Miscellaneous configurable options 782 */ 783 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 784 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 785 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 786 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 787 #ifdef CONFIG_CMD_KGDB 788 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 789 #else 790 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 791 #endif 792 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 793 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 794 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 795 796 /* 797 * For booting Linux, the board info and command line data 798 * have to be in the first 64 MB of memory, since this is 799 * the maximum mapped by the Linux kernel during initialization. 800 */ 801 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 802 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 803 804 #ifdef CONFIG_CMD_KGDB 805 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 806 #endif 807 808 /* 809 * Dynamic MTD Partition support with mtdparts 810 */ 811 #ifndef CONFIG_SYS_NO_FLASH 812 #define CONFIG_MTD_DEVICE 813 #define CONFIG_MTD_PARTITIONS 814 #define CONFIG_CMD_MTDPARTS 815 #define CONFIG_FLASH_CFI_MTD 816 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 817 "spi0=spife110000.0" 818 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 819 "128k(dtb),96m(fs),-(user);"\ 820 "fff800000.flash:2m(uboot),9m(kernel),"\ 821 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 822 "2m(uboot),9m(kernel),128k(dtb),-(user)" 823 #endif 824 825 /* 826 * Environment Configuration 827 */ 828 #define CONFIG_ROOTPATH "/opt/nfsroot" 829 #define CONFIG_BOOTFILE "uImage" 830 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 831 832 /* default location for tftp and bootm */ 833 #define CONFIG_LOADADDR 1000000 834 835 #define CONFIG_BOOTDELAY 10 /*-1 disables auto-boot*/ 836 837 #define CONFIG_BAUDRATE 115200 838 839 #define __USB_PHY_TYPE utmi 840 #define RAMDISKFILE "t104xrdb/ramdisk.uboot" 841 842 #ifdef CONFIG_T1040RDB 843 #define FDTFILE "t1040rdb/t1040rdb.dtb" 844 #elif defined(CONFIG_T1042RDB_PI) 845 #define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" 846 #elif defined(CONFIG_T1042RDB) 847 #define FDTFILE "t1042rdb/t1042rdb.dtb" 848 #elif defined(CONFIG_T1040D4RDB) 849 #define FDTFILE "t1042rdb/t1040d4rdb.dtb" 850 #elif defined(CONFIG_T1042D4RDB) 851 #define FDTFILE "t1042rdb/t1042d4rdb.dtb" 852 #endif 853 854 #ifdef CONFIG_FSL_DIU_FB 855 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi" 856 #else 857 #define DIU_ENVIRONMENT 858 #endif 859 860 #define CONFIG_EXTRA_ENV_SETTINGS \ 861 "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ 862 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 863 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 864 "netdev=eth0\0" \ 865 "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \ 866 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 867 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 868 "tftpflash=tftpboot $loadaddr $uboot && " \ 869 "protect off $ubootaddr +$filesize && " \ 870 "erase $ubootaddr +$filesize && " \ 871 "cp.b $loadaddr $ubootaddr $filesize && " \ 872 "protect on $ubootaddr +$filesize && " \ 873 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 874 "consoledev=ttyS0\0" \ 875 "ramdiskaddr=2000000\0" \ 876 "ramdiskfile=" __stringify(RAMDISKFILE) "\0" \ 877 "fdtaddr=c00000\0" \ 878 "fdtfile=" __stringify(FDTFILE) "\0" \ 879 "bdev=sda3\0" 880 881 #define CONFIG_LINUX \ 882 "setenv bootargs root=/dev/ram rw " \ 883 "console=$consoledev,$baudrate $othbootargs;" \ 884 "setenv ramdiskaddr 0x02000000;" \ 885 "setenv fdtaddr 0x00c00000;" \ 886 "setenv loadaddr 0x1000000;" \ 887 "bootm $loadaddr $ramdiskaddr $fdtaddr" 888 889 #define CONFIG_HDBOOT \ 890 "setenv bootargs root=/dev/$bdev rw " \ 891 "console=$consoledev,$baudrate $othbootargs;" \ 892 "tftp $loadaddr $bootfile;" \ 893 "tftp $fdtaddr $fdtfile;" \ 894 "bootm $loadaddr - $fdtaddr" 895 896 #define CONFIG_NFSBOOTCOMMAND \ 897 "setenv bootargs root=/dev/nfs rw " \ 898 "nfsroot=$serverip:$rootpath " \ 899 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 900 "console=$consoledev,$baudrate $othbootargs;" \ 901 "tftp $loadaddr $bootfile;" \ 902 "tftp $fdtaddr $fdtfile;" \ 903 "bootm $loadaddr - $fdtaddr" 904 905 #define CONFIG_RAMBOOTCOMMAND \ 906 "setenv bootargs root=/dev/ram rw " \ 907 "console=$consoledev,$baudrate $othbootargs;" \ 908 "tftp $ramdiskaddr $ramdiskfile;" \ 909 "tftp $loadaddr $bootfile;" \ 910 "tftp $fdtaddr $fdtfile;" \ 911 "bootm $loadaddr $ramdiskaddr $fdtaddr" 912 913 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 914 915 #include <asm/fsl_secure_boot.h> 916 917 #endif /* __CONFIG_H */ 918