1 /* 2 + * Copyright 2014 Freescale Semiconductor, Inc. 3 + * 4 + * SPDX-License-Identifier: GPL-2.0+ 5 + */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 /* 11 * T104x RDB board configuration file 12 */ 13 #include <asm/config_mpc85xx.h> 14 15 #ifdef CONFIG_RAMBOOT_PBL 16 17 #ifndef CONFIG_SECURE_BOOT 18 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg 19 #else 20 #define CONFIG_SYS_FSL_PBL_PBI \ 21 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg 22 #endif 23 24 #define CONFIG_SPL_FLUSH_IMAGE 25 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 26 #define CONFIG_SYS_TEXT_BASE 0x30001000 27 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 28 #define CONFIG_SPL_PAD_TO 0x40000 29 #define CONFIG_SPL_MAX_SIZE 0x28000 30 #ifdef CONFIG_SPL_BUILD 31 #define CONFIG_SPL_SKIP_RELOCATE 32 #define CONFIG_SPL_COMMON_INIT_DDR 33 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 34 #endif 35 #define RESET_VECTOR_OFFSET 0x27FFC 36 #define BOOT_PAGE_OFFSET 0x27000 37 38 #ifdef CONFIG_NAND 39 #ifdef CONFIG_SECURE_BOOT 40 #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) 41 /* 42 * HDR would be appended at end of image and copied to DDR along 43 * with U-Boot image. 44 */ 45 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + \ 46 CONFIG_U_BOOT_HDR_SIZE) 47 #else 48 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 49 #endif 50 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 51 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 52 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 53 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 54 #ifdef CONFIG_TARGET_T1040RDB 55 #define CONFIG_SYS_FSL_PBL_RCW \ 56 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg 57 #endif 58 #ifdef CONFIG_TARGET_T1042RDB_PI 59 #define CONFIG_SYS_FSL_PBL_RCW \ 60 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg 61 #endif 62 #ifdef CONFIG_TARGET_T1042RDB 63 #define CONFIG_SYS_FSL_PBL_RCW \ 64 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg 65 #endif 66 #ifdef CONFIG_TARGET_T1040D4RDB 67 #define CONFIG_SYS_FSL_PBL_RCW \ 68 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg 69 #endif 70 #ifdef CONFIG_TARGET_T1042D4RDB 71 #define CONFIG_SYS_FSL_PBL_RCW \ 72 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg 73 #endif 74 #define CONFIG_SPL_NAND_BOOT 75 #endif 76 77 #ifdef CONFIG_SPIFLASH 78 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 79 #define CONFIG_SPL_SPI_FLASH_MINIMAL 80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 84 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 85 #ifndef CONFIG_SPL_BUILD 86 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 87 #endif 88 #ifdef CONFIG_TARGET_T1040RDB 89 #define CONFIG_SYS_FSL_PBL_RCW \ 90 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg 91 #endif 92 #ifdef CONFIG_TARGET_T1042RDB_PI 93 #define CONFIG_SYS_FSL_PBL_RCW \ 94 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg 95 #endif 96 #ifdef CONFIG_TARGET_T1042RDB 97 #define CONFIG_SYS_FSL_PBL_RCW \ 98 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg 99 #endif 100 #ifdef CONFIG_TARGET_T1040D4RDB 101 #define CONFIG_SYS_FSL_PBL_RCW \ 102 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg 103 #endif 104 #ifdef CONFIG_TARGET_T1042D4RDB 105 #define CONFIG_SYS_FSL_PBL_RCW \ 106 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg 107 #endif 108 #define CONFIG_SPL_SPI_BOOT 109 #endif 110 111 #ifdef CONFIG_SDCARD 112 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 113 #define CONFIG_SPL_MMC_MINIMAL 114 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 115 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 116 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 117 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 118 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 119 #ifndef CONFIG_SPL_BUILD 120 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 121 #endif 122 #ifdef CONFIG_TARGET_T1040RDB 123 #define CONFIG_SYS_FSL_PBL_RCW \ 124 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg 125 #endif 126 #ifdef CONFIG_TARGET_T1042RDB_PI 127 #define CONFIG_SYS_FSL_PBL_RCW \ 128 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg 129 #endif 130 #ifdef CONFIG_TARGET_T1042RDB 131 #define CONFIG_SYS_FSL_PBL_RCW \ 132 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg 133 #endif 134 #ifdef CONFIG_TARGET_T1040D4RDB 135 #define CONFIG_SYS_FSL_PBL_RCW \ 136 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg 137 #endif 138 #ifdef CONFIG_TARGET_T1042D4RDB 139 #define CONFIG_SYS_FSL_PBL_RCW \ 140 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg 141 #endif 142 #define CONFIG_SPL_MMC_BOOT 143 #endif 144 145 #endif 146 147 /* High Level Configuration Options */ 148 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 149 #define CONFIG_MP /* support multiple processors */ 150 151 /* support deep sleep */ 152 #define CONFIG_DEEP_SLEEP 153 154 #ifndef CONFIG_SYS_TEXT_BASE 155 #define CONFIG_SYS_TEXT_BASE 0xeff40000 156 #endif 157 158 #ifndef CONFIG_RESET_VECTOR_ADDRESS 159 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 160 #endif 161 162 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 163 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 164 #define CONFIG_PCI_INDIRECT_BRIDGE 165 #define CONFIG_PCIE1 /* PCIE controller 1 */ 166 #define CONFIG_PCIE2 /* PCIE controller 2 */ 167 #define CONFIG_PCIE3 /* PCIE controller 3 */ 168 #define CONFIG_PCIE4 /* PCIE controller 4 */ 169 170 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 171 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 172 173 #define CONFIG_ENV_OVERWRITE 174 175 #ifdef CONFIG_MTD_NOR_FLASH 176 #define CONFIG_FLASH_CFI_DRIVER 177 #define CONFIG_SYS_FLASH_CFI 178 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 179 #endif 180 181 #if defined(CONFIG_SPIFLASH) 182 #define CONFIG_SYS_EXTRA_ENV_RELOC 183 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 184 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 185 #define CONFIG_ENV_SECT_SIZE 0x10000 186 #elif defined(CONFIG_SDCARD) 187 #define CONFIG_SYS_EXTRA_ENV_RELOC 188 #define CONFIG_SYS_MMC_ENV_DEV 0 189 #define CONFIG_ENV_SIZE 0x2000 190 #define CONFIG_ENV_OFFSET (512 * 0x800) 191 #elif defined(CONFIG_NAND) 192 #ifdef CONFIG_SECURE_BOOT 193 #define CONFIG_RAMBOOT_NAND 194 #define CONFIG_BOOTSCRIPT_COPY_RAM 195 #endif 196 #define CONFIG_SYS_EXTRA_ENV_RELOC 197 #define CONFIG_ENV_SIZE 0x2000 198 #define CONFIG_ENV_OFFSET (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 199 #else 200 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 201 #define CONFIG_ENV_SIZE 0x2000 202 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 203 #endif 204 205 #define CONFIG_SYS_CLK_FREQ 100000000 206 #define CONFIG_DDR_CLK_FREQ 66666666 207 208 /* 209 * These can be toggled for performance analysis, otherwise use default. 210 */ 211 #define CONFIG_SYS_CACHE_STASHING 212 #define CONFIG_BACKSIDE_L2_CACHE 213 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 214 #define CONFIG_BTB /* toggle branch predition */ 215 #define CONFIG_DDR_ECC 216 #ifdef CONFIG_DDR_ECC 217 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 218 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 219 #endif 220 221 #define CONFIG_ENABLE_36BIT_PHYS 222 223 #define CONFIG_ADDR_MAP 224 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 225 226 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 227 #define CONFIG_SYS_MEMTEST_END 0x00400000 228 #define CONFIG_SYS_ALT_MEMTEST 229 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 230 231 /* 232 * Config the L3 Cache as L3 SRAM 233 */ 234 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 235 /* 236 * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence 237 * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address 238 * (CONFIG_SYS_INIT_L3_VADDR) will be different. 239 */ 240 #define CONFIG_SYS_INIT_L3_VADDR 0xFFFC0000 241 #define CONFIG_SYS_L3_SIZE 256 << 10 242 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024) 243 #ifdef CONFIG_RAMBOOT_PBL 244 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 245 #endif 246 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 247 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 248 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 249 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 250 251 #define CONFIG_SYS_DCSRBAR 0xf0000000 252 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 253 254 /* 255 * DDR Setup 256 */ 257 #define CONFIG_VERY_BIG_RAM 258 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 259 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 260 261 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 262 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 263 264 #define CONFIG_DDR_SPD 265 266 #define CONFIG_SYS_SPD_BUS_NUM 0 267 #define SPD_EEPROM_ADDRESS 0x51 268 269 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 270 271 /* 272 * IFC Definitions 273 */ 274 #define CONFIG_SYS_FLASH_BASE 0xe8000000 275 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 276 277 #define CONFIG_SYS_NOR_CSPR_EXT (0xf) 278 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ 279 CSPR_PORT_SIZE_16 | \ 280 CSPR_MSEL_NOR | \ 281 CSPR_V) 282 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 283 284 /* 285 * TDM Definition 286 */ 287 #define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 288 289 /* NOR Flash Timing Params */ 290 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 291 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 292 FTIM0_NOR_TEADC(0x5) | \ 293 FTIM0_NOR_TEAHC(0x5)) 294 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 295 FTIM1_NOR_TRAD_NOR(0x1A) |\ 296 FTIM1_NOR_TSEQRAD_NOR(0x13)) 297 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 298 FTIM2_NOR_TCH(0x4) | \ 299 FTIM2_NOR_TWPH(0x0E) | \ 300 FTIM2_NOR_TWP(0x1c)) 301 #define CONFIG_SYS_NOR_FTIM3 0x0 302 303 #define CONFIG_SYS_FLASH_QUIET_TEST 304 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 305 306 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 307 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 308 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 309 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 310 311 #define CONFIG_SYS_FLASH_EMPTY_INFO 312 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 313 314 /* CPLD on IFC */ 315 #define CPLD_LBMAP_MASK 0x3F 316 #define CPLD_BANK_SEL_MASK 0x07 317 #define CPLD_BANK_OVERRIDE 0x40 318 #define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */ 319 #define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK0 */ 320 #define CPLD_LBMAP_RESET 0xFF 321 #define CPLD_LBMAP_SHIFT 0x03 322 323 #if defined(CONFIG_TARGET_T1042RDB_PI) 324 #define CPLD_DIU_SEL_DFP 0x80 325 #elif defined(CONFIG_TARGET_T1042D4RDB) 326 #define CPLD_DIU_SEL_DFP 0xc0 327 #endif 328 329 #if defined(CONFIG_TARGET_T1040D4RDB) 330 #define CPLD_INT_MASK_ALL 0xFF 331 #define CPLD_INT_MASK_THERM 0x80 332 #define CPLD_INT_MASK_DVI_DFP 0x40 333 #define CPLD_INT_MASK_QSGMII1 0x20 334 #define CPLD_INT_MASK_QSGMII2 0x10 335 #define CPLD_INT_MASK_SGMI1 0x08 336 #define CPLD_INT_MASK_SGMI2 0x04 337 #define CPLD_INT_MASK_TDMR1 0x02 338 #define CPLD_INT_MASK_TDMR2 0x01 339 #endif 340 341 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 342 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 343 #define CONFIG_SYS_CSPR2_EXT (0xf) 344 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 345 | CSPR_PORT_SIZE_8 \ 346 | CSPR_MSEL_GPCM \ 347 | CSPR_V) 348 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 349 #define CONFIG_SYS_CSOR2 0x0 350 /* CPLD Timing parameters for IFC CS2 */ 351 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 352 FTIM0_GPCM_TEADC(0x0e) | \ 353 FTIM0_GPCM_TEAHC(0x0e)) 354 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 355 FTIM1_GPCM_TRAD(0x1f)) 356 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 357 FTIM2_GPCM_TCH(0x8) | \ 358 FTIM2_GPCM_TWP(0x1f)) 359 #define CONFIG_SYS_CS2_FTIM3 0x0 360 361 /* NAND Flash on IFC */ 362 #define CONFIG_NAND_FSL_IFC 363 #define CONFIG_SYS_NAND_BASE 0xff800000 364 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 365 366 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 367 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 368 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 369 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 370 | CSPR_V) 371 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 372 373 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 374 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 375 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 376 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 377 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 378 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \ 379 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 380 381 #define CONFIG_SYS_NAND_ONFI_DETECTION 382 383 /* ONFI NAND Flash mode0 Timing Params */ 384 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 385 FTIM0_NAND_TWP(0x18) | \ 386 FTIM0_NAND_TWCHT(0x07) | \ 387 FTIM0_NAND_TWH(0x0a)) 388 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 389 FTIM1_NAND_TWBE(0x39) | \ 390 FTIM1_NAND_TRR(0x0e) | \ 391 FTIM1_NAND_TRP(0x18)) 392 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 393 FTIM2_NAND_TREH(0x0a) | \ 394 FTIM2_NAND_TWHRE(0x1e)) 395 #define CONFIG_SYS_NAND_FTIM3 0x0 396 397 #define CONFIG_SYS_NAND_DDR_LAW 11 398 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 399 #define CONFIG_SYS_MAX_NAND_DEVICE 1 400 401 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 402 403 #if defined(CONFIG_NAND) 404 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 405 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 406 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 407 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 408 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 409 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 410 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 411 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 412 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT 413 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 414 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 415 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 416 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 417 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 418 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 419 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 420 #else 421 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT 422 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 423 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 424 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 425 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 426 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 427 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 428 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 429 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 430 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 431 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 432 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 433 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 434 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 435 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 436 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 437 #endif 438 439 #ifdef CONFIG_SPL_BUILD 440 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 441 #else 442 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 443 #endif 444 445 #if defined(CONFIG_RAMBOOT_PBL) 446 #define CONFIG_SYS_RAMBOOT 447 #endif 448 449 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044 450 #if defined(CONFIG_NAND) 451 #define CONFIG_A008044_WORKAROUND 452 #endif 453 #endif 454 455 #define CONFIG_BOARD_EARLY_INIT_R 456 #define CONFIG_MISC_INIT_R 457 458 #define CONFIG_HWCONFIG 459 460 /* define to use L1 as initial stack */ 461 #define CONFIG_L1_INIT_RAM 462 #define CONFIG_SYS_INIT_RAM_LOCK 463 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 465 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 466 /* The assembler doesn't like typecast */ 467 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 468 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 469 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 470 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 471 472 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 473 GENERATED_GBL_DATA_SIZE) 474 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 475 476 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 477 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 478 479 /* Serial Port - controlled on board with jumper J8 480 * open - index 2 481 * shorted - index 1 482 */ 483 #define CONFIG_CONS_INDEX 1 484 #define CONFIG_SYS_NS16550_SERIAL 485 #define CONFIG_SYS_NS16550_REG_SIZE 1 486 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 487 488 #define CONFIG_SYS_BAUDRATE_TABLE \ 489 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 490 491 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 492 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 493 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 494 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 495 496 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB) 497 /* Video */ 498 #define CONFIG_FSL_DIU_FB 499 500 #ifdef CONFIG_FSL_DIU_FB 501 #define CONFIG_FSL_DIU_CH7301 502 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 503 #define CONFIG_VIDEO_LOGO 504 #define CONFIG_VIDEO_BMP_LOGO 505 #endif 506 #endif 507 508 /* I2C */ 509 #define CONFIG_SYS_I2C 510 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 511 #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ 512 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 513 #define CONFIG_SYS_FSL_I2C3_SPEED 400000 514 #define CONFIG_SYS_FSL_I2C4_SPEED 400000 515 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 516 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 517 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 518 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 519 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 520 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 521 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 522 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 523 524 /* I2C bus multiplexer */ 525 #define I2C_MUX_PCA_ADDR 0x70 526 #define I2C_MUX_CH_DEFAULT 0x8 527 528 #if defined(CONFIG_TARGET_T1042RDB_PI) || \ 529 defined(CONFIG_TARGET_T1040D4RDB) || \ 530 defined(CONFIG_TARGET_T1042D4RDB) 531 /* LDI/DVI Encoder for display */ 532 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 533 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 534 535 /* 536 * RTC configuration 537 */ 538 #define RTC 539 #define CONFIG_RTC_DS1337 1 540 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 541 542 /*DVI encoder*/ 543 #define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 544 #endif 545 546 /* 547 * eSPI - Enhanced SPI 548 */ 549 #define CONFIG_SPI_FLASH_BAR 550 #define CONFIG_SF_DEFAULT_SPEED 10000000 551 #define CONFIG_SF_DEFAULT_MODE 0 552 #define CONFIG_ENV_SPI_BUS 0 553 #define CONFIG_ENV_SPI_CS 0 554 #define CONFIG_ENV_SPI_MAX_HZ 10000000 555 #define CONFIG_ENV_SPI_MODE 0 556 557 /* 558 * General PCI 559 * Memory space is mapped 1-1, but I/O space must start from 0. 560 */ 561 562 #ifdef CONFIG_PCI 563 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 564 #ifdef CONFIG_PCIE1 565 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 566 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 567 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 568 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 569 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 570 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 571 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 572 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 573 #endif 574 575 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 576 #ifdef CONFIG_PCIE2 577 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 578 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 579 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 580 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 581 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 582 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 583 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 584 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 585 #endif 586 587 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 588 #ifdef CONFIG_PCIE3 589 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 590 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 591 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 592 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 593 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 594 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 595 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 596 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 597 #endif 598 599 /* controller 4, Base address 203000 */ 600 #ifdef CONFIG_PCIE4 601 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 602 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 603 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 604 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 605 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 606 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 607 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 608 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 609 #endif 610 611 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 612 #endif /* CONFIG_PCI */ 613 614 /* SATA */ 615 #define CONFIG_FSL_SATA_V2 616 #ifdef CONFIG_FSL_SATA_V2 617 #define CONFIG_LIBATA 618 #define CONFIG_FSL_SATA 619 620 #define CONFIG_SYS_SATA_MAX_DEVICE 1 621 #define CONFIG_SATA1 622 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 623 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 624 625 #define CONFIG_LBA48 626 #endif 627 628 /* 629 * USB 630 */ 631 #define CONFIG_HAS_FSL_DR_USB 632 633 #ifdef CONFIG_HAS_FSL_DR_USB 634 #ifdef CONFIG_USB_EHCI_HCD 635 #define CONFIG_USB_EHCI_FSL 636 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 637 #endif 638 #endif 639 640 #ifdef CONFIG_MMC 641 #define CONFIG_FSL_ESDHC 642 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 643 #endif 644 645 /* Qman/Bman */ 646 #ifndef CONFIG_NOBQFMAN 647 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 648 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 649 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 650 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 651 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 652 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 653 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 654 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 655 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 656 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 657 CONFIG_SYS_BMAN_CENA_SIZE) 658 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 659 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 660 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 661 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 662 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 663 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 664 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 665 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 666 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 667 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 668 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 669 CONFIG_SYS_QMAN_CENA_SIZE) 670 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 671 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 672 673 #define CONFIG_SYS_DPAA_FMAN 674 #define CONFIG_SYS_DPAA_PME 675 676 #define CONFIG_QE 677 #define CONFIG_U_QE 678 679 /* Default address of microcode for the Linux Fman driver */ 680 #if defined(CONFIG_SPIFLASH) 681 /* 682 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 683 * env, so we got 0x110000. 684 */ 685 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 686 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 687 #elif defined(CONFIG_SDCARD) 688 /* 689 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 690 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 691 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 692 */ 693 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 694 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 695 #elif defined(CONFIG_NAND) 696 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 697 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 698 #else 699 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 700 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 701 #endif 702 703 #if defined(CONFIG_SPIFLASH) 704 #define CONFIG_SYS_QE_FW_ADDR 0x130000 705 #elif defined(CONFIG_SDCARD) 706 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 707 #elif defined(CONFIG_NAND) 708 #define CONFIG_SYS_QE_FW_ADDR (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 709 #else 710 #define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 711 #endif 712 713 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 714 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 715 #endif /* CONFIG_NOBQFMAN */ 716 717 #ifdef CONFIG_SYS_DPAA_FMAN 718 #define CONFIG_FMAN_ENET 719 #define CONFIG_PHY_VITESSE 720 #define CONFIG_PHY_REALTEK 721 #endif 722 723 #ifdef CONFIG_FMAN_ENET 724 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB) 725 #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 726 #elif defined(CONFIG_TARGET_T1040D4RDB) 727 #define CONFIG_SYS_SGMII1_PHY_ADDR 0x01 728 #elif defined(CONFIG_TARGET_T1042D4RDB) 729 #define CONFIG_SYS_SGMII1_PHY_ADDR 0x02 730 #define CONFIG_SYS_SGMII2_PHY_ADDR 0x03 731 #define CONFIG_SYS_SGMII3_PHY_ADDR 0x01 732 #endif 733 734 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) 735 #define CONFIG_SYS_RGMII1_PHY_ADDR 0x04 736 #define CONFIG_SYS_RGMII2_PHY_ADDR 0x05 737 #else 738 #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 739 #define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 740 #endif 741 742 /* Enable VSC9953 L2 Switch driver on T1040 SoC */ 743 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) 744 #define CONFIG_VSC9953 745 #ifdef CONFIG_TARGET_T1040RDB 746 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 747 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 748 #else 749 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 750 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c 751 #endif 752 #endif 753 754 #define CONFIG_MII /* MII PHY management */ 755 #define CONFIG_ETHPRIME "FM1@DTSEC4" 756 #endif 757 758 /* 759 * Environment 760 */ 761 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 762 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 763 764 /* 765 * Miscellaneous configurable options 766 */ 767 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 768 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 769 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 770 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 771 772 /* 773 * For booting Linux, the board info and command line data 774 * have to be in the first 64 MB of memory, since this is 775 * the maximum mapped by the Linux kernel during initialization. 776 */ 777 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 778 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 779 780 #ifdef CONFIG_CMD_KGDB 781 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 782 #endif 783 784 /* 785 * Dynamic MTD Partition support with mtdparts 786 */ 787 #ifdef CONFIG_MTD_NOR_FLASH 788 #define CONFIG_MTD_DEVICE 789 #define CONFIG_MTD_PARTITIONS 790 #define CONFIG_FLASH_CFI_MTD 791 #endif 792 793 /* 794 * Environment Configuration 795 */ 796 #define CONFIG_ROOTPATH "/opt/nfsroot" 797 #define CONFIG_BOOTFILE "uImage" 798 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 799 800 /* default location for tftp and bootm */ 801 #define CONFIG_LOADADDR 1000000 802 803 #define __USB_PHY_TYPE utmi 804 #define RAMDISKFILE "t104xrdb/ramdisk.uboot" 805 806 #ifdef CONFIG_TARGET_T1040RDB 807 #define FDTFILE "t1040rdb/t1040rdb.dtb" 808 #elif defined(CONFIG_TARGET_T1042RDB_PI) 809 #define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" 810 #elif defined(CONFIG_TARGET_T1042RDB) 811 #define FDTFILE "t1042rdb/t1042rdb.dtb" 812 #elif defined(CONFIG_TARGET_T1040D4RDB) 813 #define FDTFILE "t1042rdb/t1040d4rdb.dtb" 814 #elif defined(CONFIG_TARGET_T1042D4RDB) 815 #define FDTFILE "t1042rdb/t1042d4rdb.dtb" 816 #endif 817 818 #ifdef CONFIG_FSL_DIU_FB 819 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi" 820 #else 821 #define DIU_ENVIRONMENT 822 #endif 823 824 #define CONFIG_EXTRA_ENV_SETTINGS \ 825 "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \ 826 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\ 827 "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 828 "netdev=eth0\0" \ 829 "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \ 830 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 831 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 832 "tftpflash=tftpboot $loadaddr $uboot && " \ 833 "protect off $ubootaddr +$filesize && " \ 834 "erase $ubootaddr +$filesize && " \ 835 "cp.b $loadaddr $ubootaddr $filesize && " \ 836 "protect on $ubootaddr +$filesize && " \ 837 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 838 "consoledev=ttyS0\0" \ 839 "ramdiskaddr=2000000\0" \ 840 "ramdiskfile=" __stringify(RAMDISKFILE) "\0" \ 841 "fdtaddr=1e00000\0" \ 842 "fdtfile=" __stringify(FDTFILE) "\0" \ 843 "bdev=sda3\0" 844 845 #define CONFIG_LINUX \ 846 "setenv bootargs root=/dev/ram rw " \ 847 "console=$consoledev,$baudrate $othbootargs;" \ 848 "setenv ramdiskaddr 0x02000000;" \ 849 "setenv fdtaddr 0x00c00000;" \ 850 "setenv loadaddr 0x1000000;" \ 851 "bootm $loadaddr $ramdiskaddr $fdtaddr" 852 853 #define CONFIG_HDBOOT \ 854 "setenv bootargs root=/dev/$bdev rw " \ 855 "console=$consoledev,$baudrate $othbootargs;" \ 856 "tftp $loadaddr $bootfile;" \ 857 "tftp $fdtaddr $fdtfile;" \ 858 "bootm $loadaddr - $fdtaddr" 859 860 #define CONFIG_NFSBOOTCOMMAND \ 861 "setenv bootargs root=/dev/nfs rw " \ 862 "nfsroot=$serverip:$rootpath " \ 863 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 864 "console=$consoledev,$baudrate $othbootargs;" \ 865 "tftp $loadaddr $bootfile;" \ 866 "tftp $fdtaddr $fdtfile;" \ 867 "bootm $loadaddr - $fdtaddr" 868 869 #define CONFIG_RAMBOOTCOMMAND \ 870 "setenv bootargs root=/dev/ram rw " \ 871 "console=$consoledev,$baudrate $othbootargs;" \ 872 "tftp $ramdiskaddr $ramdiskfile;" \ 873 "tftp $loadaddr $bootfile;" \ 874 "tftp $fdtaddr $fdtfile;" \ 875 "bootm $loadaddr $ramdiskaddr $fdtaddr" 876 877 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 878 879 #include <asm/fsl_secure_boot.h> 880 881 #endif /* __CONFIG_H */ 882