1 /* 2 * Copyright 2013-2014 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #ifndef __CONFIG_H 24 #define __CONFIG_H 25 26 /* 27 * T1040 QDS board configuration file 28 */ 29 30 #ifdef CONFIG_RAMBOOT_PBL 31 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 32 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg 34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 39 #define CONFIG_MP /* support multiple processors */ 40 41 /* support deep sleep */ 42 #define CONFIG_DEEP_SLEEP 43 44 #ifndef CONFIG_RESET_VECTOR_ADDRESS 45 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 46 #endif 47 48 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 49 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 50 #define CONFIG_PCI_INDIRECT_BRIDGE 51 #define CONFIG_PCIE1 /* PCIE controller 1 */ 52 #define CONFIG_PCIE2 /* PCIE controller 2 */ 53 #define CONFIG_PCIE3 /* PCIE controller 3 */ 54 #define CONFIG_PCIE4 /* PCIE controller 4 */ 55 56 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 57 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 58 59 #define CONFIG_ENV_OVERWRITE 60 61 #ifndef CONFIG_MTD_NOR_FLASH 62 #else 63 #define CONFIG_FLASH_CFI_DRIVER 64 #define CONFIG_SYS_FLASH_CFI 65 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 66 #endif 67 68 #ifdef CONFIG_MTD_NOR_FLASH 69 #if defined(CONFIG_SPIFLASH) 70 #define CONFIG_SYS_EXTRA_ENV_RELOC 71 #define CONFIG_ENV_SPI_BUS 0 72 #define CONFIG_ENV_SPI_CS 0 73 #define CONFIG_ENV_SPI_MAX_HZ 10000000 74 #define CONFIG_ENV_SPI_MODE 0 75 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 76 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 77 #define CONFIG_ENV_SECT_SIZE 0x10000 78 #elif defined(CONFIG_SDCARD) 79 #define CONFIG_SYS_EXTRA_ENV_RELOC 80 #define CONFIG_SYS_MMC_ENV_DEV 0 81 #define CONFIG_ENV_SIZE 0x2000 82 #define CONFIG_ENV_OFFSET (512 * 1658) 83 #elif defined(CONFIG_NAND) 84 #define CONFIG_SYS_EXTRA_ENV_RELOC 85 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 86 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 87 #else 88 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 89 #define CONFIG_ENV_SIZE 0x2000 90 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 91 #endif 92 #else /* CONFIG_MTD_NOR_FLASH */ 93 #define CONFIG_ENV_SIZE 0x2000 94 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 95 #endif 96 97 #ifndef __ASSEMBLY__ 98 unsigned long get_board_sys_clk(void); 99 unsigned long get_board_ddr_clk(void); 100 #endif 101 102 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 103 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 104 105 /* 106 * These can be toggled for performance analysis, otherwise use default. 107 */ 108 #define CONFIG_SYS_CACHE_STASHING 109 #define CONFIG_BACKSIDE_L2_CACHE 110 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 111 #define CONFIG_BTB /* toggle branch predition */ 112 #define CONFIG_DDR_ECC 113 #ifdef CONFIG_DDR_ECC 114 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 115 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 116 #endif 117 118 #define CONFIG_ENABLE_36BIT_PHYS 119 120 #define CONFIG_ADDR_MAP 121 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 122 123 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 124 #define CONFIG_SYS_MEMTEST_END 0x00400000 125 126 /* 127 * Config the L3 Cache as L3 SRAM 128 */ 129 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 130 131 #define CONFIG_SYS_DCSRBAR 0xf0000000 132 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 133 134 /* EEPROM */ 135 #define CONFIG_ID_EEPROM 136 #define CONFIG_SYS_I2C_EEPROM_NXID 137 #define CONFIG_SYS_EEPROM_BUS_NUM 0 138 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 139 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 140 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 141 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 142 143 /* 144 * DDR Setup 145 */ 146 #define CONFIG_VERY_BIG_RAM 147 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 148 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 149 150 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 151 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 152 153 #define CONFIG_DDR_SPD 154 #define CONFIG_FSL_DDR_INTERACTIVE 155 156 #define CONFIG_SYS_SPD_BUS_NUM 0 157 #define SPD_EEPROM_ADDRESS 0x51 158 159 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 160 161 /* 162 * IFC Definitions 163 */ 164 #define CONFIG_SYS_FLASH_BASE 0xe0000000 165 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 166 167 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 168 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 169 + 0x8000000) | \ 170 CSPR_PORT_SIZE_16 | \ 171 CSPR_MSEL_NOR | \ 172 CSPR_V) 173 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 174 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 175 CSPR_PORT_SIZE_16 | \ 176 CSPR_MSEL_NOR | \ 177 CSPR_V) 178 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 179 180 /* 181 * TDM Definition 182 */ 183 #define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 184 185 /* NOR Flash Timing Params */ 186 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 187 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 188 FTIM0_NOR_TEADC(0x5) | \ 189 FTIM0_NOR_TEAHC(0x5)) 190 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 191 FTIM1_NOR_TRAD_NOR(0x1A) |\ 192 FTIM1_NOR_TSEQRAD_NOR(0x13)) 193 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 194 FTIM2_NOR_TCH(0x4) | \ 195 FTIM2_NOR_TWPH(0x0E) | \ 196 FTIM2_NOR_TWP(0x1c)) 197 #define CONFIG_SYS_NOR_FTIM3 0x0 198 199 #define CONFIG_SYS_FLASH_QUIET_TEST 200 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 201 202 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 203 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 204 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 205 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 206 207 #define CONFIG_SYS_FLASH_EMPTY_INFO 208 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 209 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 210 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 211 #define QIXIS_BASE 0xffdf0000 212 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 213 #define QIXIS_LBMAP_SWITCH 0x06 214 #define QIXIS_LBMAP_MASK 0x0f 215 #define QIXIS_LBMAP_SHIFT 0 216 #define QIXIS_LBMAP_DFLTBANK 0x00 217 #define QIXIS_LBMAP_ALTBANK 0x04 218 #define QIXIS_RST_CTL_RESET 0x31 219 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 220 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 221 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 222 #define QIXIS_RST_FORCE_MEM 0x01 223 224 #define CONFIG_SYS_CSPR3_EXT (0xf) 225 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 226 | CSPR_PORT_SIZE_8 \ 227 | CSPR_MSEL_GPCM \ 228 | CSPR_V) 229 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 230 #define CONFIG_SYS_CSOR3 0x0 231 /* QIXIS Timing parameters for IFC CS3 */ 232 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 233 FTIM0_GPCM_TEADC(0x0e) | \ 234 FTIM0_GPCM_TEAHC(0x0e)) 235 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 236 FTIM1_GPCM_TRAD(0x3f)) 237 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 238 FTIM2_GPCM_TCH(0x8) | \ 239 FTIM2_GPCM_TWP(0x1f)) 240 #define CONFIG_SYS_CS3_FTIM3 0x0 241 242 #define CONFIG_NAND_FSL_IFC 243 #define CONFIG_SYS_NAND_BASE 0xff800000 244 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 245 246 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 247 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 248 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 249 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 250 | CSPR_V) 251 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 252 253 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 254 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 255 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 256 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 257 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 258 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 259 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 260 261 #define CONFIG_SYS_NAND_ONFI_DETECTION 262 263 /* ONFI NAND Flash mode0 Timing Params */ 264 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 265 FTIM0_NAND_TWP(0x18) | \ 266 FTIM0_NAND_TWCHT(0x07) | \ 267 FTIM0_NAND_TWH(0x0a)) 268 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 269 FTIM1_NAND_TWBE(0x39) | \ 270 FTIM1_NAND_TRR(0x0e) | \ 271 FTIM1_NAND_TRP(0x18)) 272 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 273 FTIM2_NAND_TREH(0x0a) | \ 274 FTIM2_NAND_TWHRE(0x1e)) 275 #define CONFIG_SYS_NAND_FTIM3 0x0 276 277 #define CONFIG_SYS_NAND_DDR_LAW 11 278 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 279 #define CONFIG_SYS_MAX_NAND_DEVICE 1 280 281 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 282 283 #if defined(CONFIG_NAND) 284 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 285 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 286 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 287 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 288 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 289 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 290 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 291 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 292 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 293 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 294 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 295 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 296 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 297 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 298 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 299 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 300 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 301 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 302 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 303 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 304 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 305 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 306 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 307 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 308 #else 309 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 310 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 311 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 312 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 313 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 314 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 315 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 316 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 317 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 318 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 319 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 320 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 321 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 322 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 323 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 324 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 325 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 326 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 327 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 328 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 329 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 330 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 331 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 332 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 333 #endif 334 335 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 336 337 #if defined(CONFIG_RAMBOOT_PBL) 338 #define CONFIG_SYS_RAMBOOT 339 #endif 340 341 #define CONFIG_MISC_INIT_R 342 343 #define CONFIG_HWCONFIG 344 345 /* define to use L1 as initial stack */ 346 #define CONFIG_L1_INIT_RAM 347 #define CONFIG_SYS_INIT_RAM_LOCK 348 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 349 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 350 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 351 /* The assembler doesn't like typecast */ 352 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 353 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 354 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 355 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 356 357 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 358 GENERATED_GBL_DATA_SIZE) 359 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 360 361 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 362 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 363 364 /* Serial Port - controlled on board with jumper J8 365 * open - index 2 366 * shorted - index 1 367 */ 368 #define CONFIG_SYS_NS16550_SERIAL 369 #define CONFIG_SYS_NS16550_REG_SIZE 1 370 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 371 372 #define CONFIG_SYS_BAUDRATE_TABLE \ 373 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 374 375 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 376 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 377 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 378 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 379 380 /* Video */ 381 #define CONFIG_FSL_DIU_FB 382 #ifdef CONFIG_FSL_DIU_FB 383 #define CONFIG_FSL_DIU_CH7301 384 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 385 #define CONFIG_VIDEO_LOGO 386 #define CONFIG_VIDEO_BMP_LOGO 387 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 388 /* 389 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 390 * disable empty flash sector detection, which is I/O-intensive. 391 */ 392 #undef CONFIG_SYS_FLASH_EMPTY_INFO 393 #endif 394 395 /* I2C */ 396 #define CONFIG_SYS_I2C 397 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 398 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 399 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 400 #define CONFIG_SYS_FSL_I2C3_SPEED 50000 401 #define CONFIG_SYS_FSL_I2C4_SPEED 50000 402 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 403 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 404 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 405 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 406 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 407 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 408 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 409 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 410 411 #define I2C_MUX_PCA_ADDR 0x77 412 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 413 414 /* I2C bus multiplexer */ 415 #define I2C_MUX_CH_DEFAULT 0x8 416 #define I2C_MUX_CH_DIU 0xC 417 418 /* LDI/DVI Encoder for display */ 419 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 420 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 421 422 /* 423 * RTC configuration 424 */ 425 #define RTC 426 #define CONFIG_RTC_DS3231 1 427 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 428 429 /* 430 * eSPI - Enhanced SPI 431 */ 432 #define CONFIG_SF_DEFAULT_SPEED 10000000 433 #define CONFIG_SF_DEFAULT_MODE 0 434 435 /* 436 * General PCI 437 * Memory space is mapped 1-1, but I/O space must start from 0. 438 */ 439 440 #ifdef CONFIG_PCI 441 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 442 #ifdef CONFIG_PCIE1 443 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 444 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 445 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 446 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 447 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 448 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 449 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 450 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 451 #endif 452 453 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 454 #ifdef CONFIG_PCIE2 455 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 456 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 457 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 458 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 459 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 460 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 461 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 462 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 463 #endif 464 465 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 466 #ifdef CONFIG_PCIE3 467 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 468 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 469 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 470 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 471 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 472 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 473 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 474 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 475 #endif 476 477 /* controller 4, Base address 203000 */ 478 #ifdef CONFIG_PCIE4 479 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 480 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 481 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 482 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 483 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 484 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 485 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 486 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 487 #endif 488 489 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 490 #endif /* CONFIG_PCI */ 491 492 /* SATA */ 493 #define CONFIG_FSL_SATA_V2 494 #ifdef CONFIG_FSL_SATA_V2 495 #define CONFIG_SYS_SATA_MAX_DEVICE 2 496 #define CONFIG_SATA1 497 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 498 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 499 #define CONFIG_SATA2 500 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 501 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 502 503 #define CONFIG_LBA48 504 #endif 505 506 /* 507 * USB 508 */ 509 #define CONFIG_HAS_FSL_DR_USB 510 511 #ifdef CONFIG_HAS_FSL_DR_USB 512 #ifdef CONFIG_USB_EHCI_HCD 513 #define CONFIG_USB_EHCI_FSL 514 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 515 #endif 516 #endif 517 518 #ifdef CONFIG_MMC 519 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK 520 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 521 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT 522 #endif 523 524 /* Qman/Bman */ 525 #ifndef CONFIG_NOBQFMAN 526 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 527 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 528 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 529 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 530 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 531 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 532 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 533 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 534 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 535 CONFIG_SYS_BMAN_CENA_SIZE) 536 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 537 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 538 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 539 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 540 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 541 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 542 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 543 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 544 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 545 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 546 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 547 CONFIG_SYS_QMAN_CENA_SIZE) 548 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 549 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 550 551 #define CONFIG_SYS_DPAA_FMAN 552 #define CONFIG_SYS_DPAA_PME 553 554 #define CONFIG_QE 555 #define CONFIG_U_QE 556 /* Default address of microcode for the Linux Fman driver */ 557 #if defined(CONFIG_SPIFLASH) 558 /* 559 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 560 * env, so we got 0x110000. 561 */ 562 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 563 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 564 #elif defined(CONFIG_SDCARD) 565 /* 566 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 567 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 568 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 569 */ 570 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 571 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 572 #elif defined(CONFIG_NAND) 573 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 574 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 575 #else 576 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 577 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 578 #define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 579 #endif 580 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 581 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 582 #endif /* CONFIG_NOBQFMAN */ 583 584 #ifdef CONFIG_SYS_DPAA_FMAN 585 #define CONFIG_FMAN_ENET 586 #define CONFIG_PHYLIB_10G 587 #define CONFIG_PHY_VITESSE 588 #define CONFIG_PHY_REALTEK 589 #define CONFIG_PHY_TERANETICS 590 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 591 #define SGMII_CARD_PORT2_PHY_ADDR 0x10 592 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 593 #define SGMII_CARD_PORT4_PHY_ADDR 0x11 594 #endif 595 596 #ifdef CONFIG_FMAN_ENET 597 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 598 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 599 600 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 601 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 602 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 603 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 604 605 #define CONFIG_MII /* MII PHY management */ 606 #define CONFIG_ETHPRIME "FM1@DTSEC1" 607 #endif 608 609 /* Enable VSC9953 L2 Switch driver */ 610 #define CONFIG_VSC9953 611 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 612 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 613 614 /* 615 * Dynamic MTD Partition support with mtdparts 616 */ 617 #ifdef CONFIG_MTD_NOR_FLASH 618 #define CONFIG_MTD_DEVICE 619 #define CONFIG_MTD_PARTITIONS 620 #define CONFIG_FLASH_CFI_MTD 621 #endif 622 623 /* 624 * Environment 625 */ 626 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 627 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 628 629 /* 630 * Miscellaneous configurable options 631 */ 632 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 633 634 /* 635 * For booting Linux, the board info and command line data 636 * have to be in the first 64 MB of memory, since this is 637 * the maximum mapped by the Linux kernel during initialization. 638 */ 639 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 640 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 641 642 #ifdef CONFIG_CMD_KGDB 643 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 644 #endif 645 646 /* 647 * Environment Configuration 648 */ 649 #define CONFIG_ROOTPATH "/opt/nfsroot" 650 #define CONFIG_BOOTFILE "uImage" 651 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 652 653 /* default location for tftp and bootm */ 654 #define CONFIG_LOADADDR 1000000 655 656 #define __USB_PHY_TYPE utmi 657 658 #define CONFIG_EXTRA_ENV_SETTINGS \ 659 "hwconfig=fsl_ddr:bank_intlv=auto;" \ 660 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 661 "netdev=eth0\0" \ 662 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 663 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 664 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 665 "tftpflash=tftpboot $loadaddr $uboot && " \ 666 "protect off $ubootaddr +$filesize && " \ 667 "erase $ubootaddr +$filesize && " \ 668 "cp.b $loadaddr $ubootaddr $filesize && " \ 669 "protect on $ubootaddr +$filesize && " \ 670 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 671 "consoledev=ttyS0\0" \ 672 "ramdiskaddr=2000000\0" \ 673 "ramdiskfile=t1040qds/ramdisk.uboot\0" \ 674 "fdtaddr=1e00000\0" \ 675 "fdtfile=t1040qds/t1040qds.dtb\0" \ 676 "bdev=sda3\0" 677 678 #define CONFIG_LINUX \ 679 "setenv bootargs root=/dev/ram rw " \ 680 "console=$consoledev,$baudrate $othbootargs;" \ 681 "setenv ramdiskaddr 0x02000000;" \ 682 "setenv fdtaddr 0x00c00000;" \ 683 "setenv loadaddr 0x1000000;" \ 684 "bootm $loadaddr $ramdiskaddr $fdtaddr" 685 686 #define CONFIG_HDBOOT \ 687 "setenv bootargs root=/dev/$bdev rw " \ 688 "console=$consoledev,$baudrate $othbootargs;" \ 689 "tftp $loadaddr $bootfile;" \ 690 "tftp $fdtaddr $fdtfile;" \ 691 "bootm $loadaddr - $fdtaddr" 692 693 #define CONFIG_NFSBOOTCOMMAND \ 694 "setenv bootargs root=/dev/nfs rw " \ 695 "nfsroot=$serverip:$rootpath " \ 696 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 697 "console=$consoledev,$baudrate $othbootargs;" \ 698 "tftp $loadaddr $bootfile;" \ 699 "tftp $fdtaddr $fdtfile;" \ 700 "bootm $loadaddr - $fdtaddr" 701 702 #define CONFIG_RAMBOOTCOMMAND \ 703 "setenv bootargs root=/dev/ram rw " \ 704 "console=$consoledev,$baudrate $othbootargs;" \ 705 "tftp $ramdiskaddr $ramdiskfile;" \ 706 "tftp $loadaddr $bootfile;" \ 707 "tftp $fdtaddr $fdtfile;" \ 708 "bootm $loadaddr $ramdiskaddr $fdtaddr" 709 710 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 711 712 #include <asm/fsl_secure_boot.h> 713 714 #endif /* __CONFIG_H */ 715