1 /* 2 * Copyright 2013-2014 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #ifndef __CONFIG_H 24 #define __CONFIG_H 25 26 /* 27 * T1040 QDS board configuration file 28 */ 29 #define CONFIG_T1040QDS 30 #define CONFIG_PHYS_64BIT 31 32 #ifdef CONFIG_RAMBOOT_PBL 33 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 34 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 35 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg 36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg 37 #endif 38 39 /* High Level Configuration Options */ 40 #define CONFIG_BOOKE 41 #define CONFIG_E500 /* BOOKE e500 family */ 42 #define CONFIG_E500MC /* BOOKE e500mc family */ 43 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 44 #define CONFIG_MP /* support multiple processors */ 45 46 /* support deep sleep */ 47 #define CONFIG_DEEP_SLEEP 48 #define CONFIG_SILENT_CONSOLE 49 50 #ifndef CONFIG_SYS_TEXT_BASE 51 #define CONFIG_SYS_TEXT_BASE 0xeff40000 52 #endif 53 54 #ifndef CONFIG_RESET_VECTOR_ADDRESS 55 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 56 #endif 57 58 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 59 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 60 #define CONFIG_FSL_IFC /* Enable IFC Support */ 61 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 62 #define CONFIG_PCI /* Enable PCI/PCIE */ 63 #define CONFIG_PCI_INDIRECT_BRIDGE 64 #define CONFIG_PCIE1 /* PCIE controler 1 */ 65 #define CONFIG_PCIE2 /* PCIE controler 2 */ 66 #define CONFIG_PCIE3 /* PCIE controler 3 */ 67 #define CONFIG_PCIE4 /* PCIE controler 4 */ 68 69 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 70 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 71 72 #define CONFIG_FSL_LAW /* Use common FSL init code */ 73 74 #define CONFIG_ENV_OVERWRITE 75 76 #ifdef CONFIG_SYS_NO_FLASH 77 #define CONFIG_ENV_IS_NOWHERE 78 #else 79 #define CONFIG_FLASH_CFI_DRIVER 80 #define CONFIG_SYS_FLASH_CFI 81 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 82 #endif 83 84 #ifndef CONFIG_SYS_NO_FLASH 85 #if defined(CONFIG_SPIFLASH) 86 #define CONFIG_SYS_EXTRA_ENV_RELOC 87 #define CONFIG_ENV_IS_IN_SPI_FLASH 88 #define CONFIG_ENV_SPI_BUS 0 89 #define CONFIG_ENV_SPI_CS 0 90 #define CONFIG_ENV_SPI_MAX_HZ 10000000 91 #define CONFIG_ENV_SPI_MODE 0 92 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 93 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 94 #define CONFIG_ENV_SECT_SIZE 0x10000 95 #elif defined(CONFIG_SDCARD) 96 #define CONFIG_SYS_EXTRA_ENV_RELOC 97 #define CONFIG_ENV_IS_IN_MMC 98 #define CONFIG_SYS_MMC_ENV_DEV 0 99 #define CONFIG_ENV_SIZE 0x2000 100 #define CONFIG_ENV_OFFSET (512 * 1658) 101 #elif defined(CONFIG_NAND) 102 #define CONFIG_SYS_EXTRA_ENV_RELOC 103 #define CONFIG_ENV_IS_IN_NAND 104 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 105 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 106 #else 107 #define CONFIG_ENV_IS_IN_FLASH 108 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 109 #define CONFIG_ENV_SIZE 0x2000 110 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 111 #endif 112 #else /* CONFIG_SYS_NO_FLASH */ 113 #define CONFIG_ENV_SIZE 0x2000 114 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 115 #endif 116 117 #ifndef __ASSEMBLY__ 118 unsigned long get_board_sys_clk(void); 119 unsigned long get_board_ddr_clk(void); 120 #endif 121 122 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 123 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 124 125 /* 126 * These can be toggled for performance analysis, otherwise use default. 127 */ 128 #define CONFIG_SYS_CACHE_STASHING 129 #define CONFIG_BACKSIDE_L2_CACHE 130 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 131 #define CONFIG_BTB /* toggle branch predition */ 132 #define CONFIG_DDR_ECC 133 #ifdef CONFIG_DDR_ECC 134 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 135 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 136 #endif 137 138 #define CONFIG_ENABLE_36BIT_PHYS 139 140 #define CONFIG_ADDR_MAP 141 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 142 143 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 144 #define CONFIG_SYS_MEMTEST_END 0x00400000 145 #define CONFIG_SYS_ALT_MEMTEST 146 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 147 148 /* 149 * Config the L3 Cache as L3 SRAM 150 */ 151 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 152 153 #define CONFIG_SYS_DCSRBAR 0xf0000000 154 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 155 156 /* EEPROM */ 157 #define CONFIG_ID_EEPROM 158 #define CONFIG_SYS_I2C_EEPROM_NXID 159 #define CONFIG_SYS_EEPROM_BUS_NUM 0 160 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 161 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 162 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 163 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 164 165 /* 166 * DDR Setup 167 */ 168 #define CONFIG_VERY_BIG_RAM 169 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 170 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 171 172 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ 173 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 174 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 175 176 #define CONFIG_DDR_SPD 177 #ifndef CONFIG_SYS_FSL_DDR4 178 #define CONFIG_SYS_FSL_DDR3 179 #define CONFIG_FSL_DDR_INTERACTIVE 180 #endif 181 182 #define CONFIG_SYS_SPD_BUS_NUM 0 183 #define SPD_EEPROM_ADDRESS 0x51 184 185 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 186 187 /* 188 * IFC Definitions 189 */ 190 #define CONFIG_SYS_FLASH_BASE 0xe0000000 191 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 192 193 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 194 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 195 + 0x8000000) | \ 196 CSPR_PORT_SIZE_16 | \ 197 CSPR_MSEL_NOR | \ 198 CSPR_V) 199 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 200 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 201 CSPR_PORT_SIZE_16 | \ 202 CSPR_MSEL_NOR | \ 203 CSPR_V) 204 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 205 206 /* 207 * TDM Definition 208 */ 209 #define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 210 211 /* NOR Flash Timing Params */ 212 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 213 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 214 FTIM0_NOR_TEADC(0x5) | \ 215 FTIM0_NOR_TEAHC(0x5)) 216 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 217 FTIM1_NOR_TRAD_NOR(0x1A) |\ 218 FTIM1_NOR_TSEQRAD_NOR(0x13)) 219 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 220 FTIM2_NOR_TCH(0x4) | \ 221 FTIM2_NOR_TWPH(0x0E) | \ 222 FTIM2_NOR_TWP(0x1c)) 223 #define CONFIG_SYS_NOR_FTIM3 0x0 224 225 #define CONFIG_SYS_FLASH_QUIET_TEST 226 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 227 228 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 229 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 230 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 231 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 232 233 #define CONFIG_SYS_FLASH_EMPTY_INFO 234 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 235 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 236 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 237 #define QIXIS_BASE 0xffdf0000 238 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 239 #define QIXIS_LBMAP_SWITCH 0x06 240 #define QIXIS_LBMAP_MASK 0x0f 241 #define QIXIS_LBMAP_SHIFT 0 242 #define QIXIS_LBMAP_DFLTBANK 0x00 243 #define QIXIS_LBMAP_ALTBANK 0x04 244 #define QIXIS_RST_CTL_RESET 0x31 245 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 246 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 247 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 248 #define QIXIS_RST_FORCE_MEM 0x01 249 250 #define CONFIG_SYS_CSPR3_EXT (0xf) 251 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 252 | CSPR_PORT_SIZE_8 \ 253 | CSPR_MSEL_GPCM \ 254 | CSPR_V) 255 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 256 #define CONFIG_SYS_CSOR3 0x0 257 /* QIXIS Timing parameters for IFC CS3 */ 258 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 259 FTIM0_GPCM_TEADC(0x0e) | \ 260 FTIM0_GPCM_TEAHC(0x0e)) 261 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 262 FTIM1_GPCM_TRAD(0x3f)) 263 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 264 FTIM2_GPCM_TCH(0x8) | \ 265 FTIM2_GPCM_TWP(0x1f)) 266 #define CONFIG_SYS_CS3_FTIM3 0x0 267 268 #define CONFIG_NAND_FSL_IFC 269 #define CONFIG_SYS_NAND_BASE 0xff800000 270 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 271 272 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 273 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 274 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 275 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 276 | CSPR_V) 277 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 278 279 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 280 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 281 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 282 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 283 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 284 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 285 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 286 287 #define CONFIG_SYS_NAND_ONFI_DETECTION 288 289 /* ONFI NAND Flash mode0 Timing Params */ 290 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 291 FTIM0_NAND_TWP(0x18) | \ 292 FTIM0_NAND_TWCHT(0x07) | \ 293 FTIM0_NAND_TWH(0x0a)) 294 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 295 FTIM1_NAND_TWBE(0x39) | \ 296 FTIM1_NAND_TRR(0x0e) | \ 297 FTIM1_NAND_TRP(0x18)) 298 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 299 FTIM2_NAND_TREH(0x0a) | \ 300 FTIM2_NAND_TWHRE(0x1e)) 301 #define CONFIG_SYS_NAND_FTIM3 0x0 302 303 #define CONFIG_SYS_NAND_DDR_LAW 11 304 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 305 #define CONFIG_SYS_MAX_NAND_DEVICE 1 306 #define CONFIG_MTD_NAND_VERIFY_WRITE 307 #define CONFIG_CMD_NAND 308 309 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 310 311 #if defined(CONFIG_NAND) 312 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 313 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 314 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 315 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 316 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 317 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 318 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 319 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 320 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 321 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 322 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 323 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 324 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 325 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 326 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 327 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 328 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 329 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 330 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 331 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 332 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 333 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 334 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 335 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 336 #else 337 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 338 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 339 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 340 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 341 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 342 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 343 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 344 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 345 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 346 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 347 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 348 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 349 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 350 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 351 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 352 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 353 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 354 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 355 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 356 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 357 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 358 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 359 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 360 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 361 #endif 362 363 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 364 365 #if defined(CONFIG_RAMBOOT_PBL) 366 #define CONFIG_SYS_RAMBOOT 367 #endif 368 369 #define CONFIG_BOARD_EARLY_INIT_R 370 #define CONFIG_MISC_INIT_R 371 372 #define CONFIG_HWCONFIG 373 374 /* define to use L1 as initial stack */ 375 #define CONFIG_L1_INIT_RAM 376 #define CONFIG_SYS_INIT_RAM_LOCK 377 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 378 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 379 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 380 /* The assembler doesn't like typecast */ 381 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 382 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 383 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 384 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 385 386 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 387 GENERATED_GBL_DATA_SIZE) 388 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 389 390 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 391 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 392 393 /* Serial Port - controlled on board with jumper J8 394 * open - index 2 395 * shorted - index 1 396 */ 397 #define CONFIG_CONS_INDEX 1 398 #define CONFIG_SYS_NS16550 399 #define CONFIG_SYS_NS16550_SERIAL 400 #define CONFIG_SYS_NS16550_REG_SIZE 1 401 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 402 403 #define CONFIG_SYS_BAUDRATE_TABLE \ 404 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 405 406 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 407 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 408 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 409 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 410 #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ 411 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 412 413 /* Use the HUSH parser */ 414 #define CONFIG_SYS_HUSH_PARSER 415 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 416 417 /* Video */ 418 #define CONFIG_FSL_DIU_FB 419 #ifdef CONFIG_FSL_DIU_FB 420 #define CONFIG_FSL_DIU_CH7301 421 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 422 #define CONFIG_VIDEO 423 #define CONFIG_CMD_BMP 424 #define CONFIG_CFB_CONSOLE 425 #define CONFIG_VIDEO_SW_CURSOR 426 #define CONFIG_VGA_AS_SINGLE_DEVICE 427 #define CONFIG_VIDEO_LOGO 428 #define CONFIG_VIDEO_BMP_LOGO 429 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 430 /* 431 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 432 * disable empty flash sector detection, which is I/O-intensive. 433 */ 434 #undef CONFIG_SYS_FLASH_EMPTY_INFO 435 #endif 436 437 /* pass open firmware flat tree */ 438 #define CONFIG_OF_LIBFDT 439 #define CONFIG_OF_BOARD_SETUP 440 #define CONFIG_OF_STDOUT_VIA_ALIAS 441 442 /* new uImage format support */ 443 #define CONFIG_FIT 444 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 445 446 /* I2C */ 447 #define CONFIG_SYS_I2C 448 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 449 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 450 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 451 #define CONFIG_SYS_FSL_I2C3_SPEED 50000 452 #define CONFIG_SYS_FSL_I2C4_SPEED 50000 453 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 454 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 455 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 456 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 457 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 458 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 459 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 460 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 461 462 #define I2C_MUX_PCA_ADDR 0x77 463 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 464 465 466 /* I2C bus multiplexer */ 467 #define I2C_MUX_CH_DEFAULT 0x8 468 #define I2C_MUX_CH_DIU 0xC 469 470 /* LDI/DVI Encoder for display */ 471 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 472 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 473 474 /* 475 * RTC configuration 476 */ 477 #define RTC 478 #define CONFIG_RTC_DS3231 1 479 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 480 481 /* 482 * eSPI - Enhanced SPI 483 */ 484 #define CONFIG_FSL_ESPI 485 #define CONFIG_SPI_FLASH 486 #define CONFIG_SPI_FLASH_STMICRO 487 #define CONFIG_SPI_FLASH_SST 488 #define CONFIG_SPI_FLASH_EON 489 #define CONFIG_CMD_SF 490 #define CONFIG_SF_DEFAULT_SPEED 10000000 491 #define CONFIG_SF_DEFAULT_MODE 0 492 493 /* 494 * General PCI 495 * Memory space is mapped 1-1, but I/O space must start from 0. 496 */ 497 498 #ifdef CONFIG_PCI 499 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 500 #ifdef CONFIG_PCIE1 501 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 502 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 503 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 504 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 505 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 506 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 507 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 508 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 509 #endif 510 511 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 512 #ifdef CONFIG_PCIE2 513 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 514 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 515 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 516 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 517 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 518 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 519 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 520 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 521 #endif 522 523 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 524 #ifdef CONFIG_PCIE3 525 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 526 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 527 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 528 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 529 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 530 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 531 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 532 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 533 #endif 534 535 /* controller 4, Base address 203000 */ 536 #ifdef CONFIG_PCIE4 537 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 538 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 539 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 540 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 541 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 542 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 543 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 544 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 545 #endif 546 547 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 548 #define CONFIG_E1000 549 550 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 551 #define CONFIG_DOS_PARTITION 552 #endif /* CONFIG_PCI */ 553 554 /* SATA */ 555 #define CONFIG_FSL_SATA_V2 556 #ifdef CONFIG_FSL_SATA_V2 557 #define CONFIG_LIBATA 558 #define CONFIG_FSL_SATA 559 560 #define CONFIG_SYS_SATA_MAX_DEVICE 2 561 #define CONFIG_SATA1 562 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 563 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 564 #define CONFIG_SATA2 565 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 566 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 567 568 #define CONFIG_LBA48 569 #define CONFIG_CMD_SATA 570 #define CONFIG_DOS_PARTITION 571 #define CONFIG_CMD_EXT2 572 #endif 573 574 /* 575 * USB 576 */ 577 #define CONFIG_HAS_FSL_DR_USB 578 579 #ifdef CONFIG_HAS_FSL_DR_USB 580 #define CONFIG_USB_EHCI 581 582 #ifdef CONFIG_USB_EHCI 583 #define CONFIG_CMD_USB 584 #define CONFIG_USB_STORAGE 585 #define CONFIG_USB_EHCI_FSL 586 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 587 #define CONFIG_CMD_EXT2 588 #endif 589 #endif 590 591 #define CONFIG_MMC 592 593 #ifdef CONFIG_MMC 594 #define CONFIG_FSL_ESDHC 595 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 596 #define CONFIG_CMD_MMC 597 #define CONFIG_GENERIC_MMC 598 #define CONFIG_CMD_EXT2 599 #define CONFIG_CMD_FAT 600 #define CONFIG_DOS_PARTITION 601 #endif 602 603 /* Qman/Bman */ 604 #ifndef CONFIG_NOBQFMAN 605 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 606 #define CONFIG_SYS_BMAN_NUM_PORTALS 25 607 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 608 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 609 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 610 #define CONFIG_SYS_QMAN_NUM_PORTALS 25 611 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 612 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 613 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 614 615 #define CONFIG_SYS_DPAA_FMAN 616 #define CONFIG_SYS_DPAA_PME 617 618 #define CONFIG_QE 619 #define CONFIG_U_QE 620 /* Default address of microcode for the Linux Fman driver */ 621 #if defined(CONFIG_SPIFLASH) 622 /* 623 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 624 * env, so we got 0x110000. 625 */ 626 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 627 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 628 #elif defined(CONFIG_SDCARD) 629 /* 630 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 631 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 632 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 633 */ 634 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 635 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 636 #elif defined(CONFIG_NAND) 637 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 638 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 639 #else 640 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 641 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 642 #define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 643 #endif 644 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 645 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 646 #endif /* CONFIG_NOBQFMAN */ 647 648 #ifdef CONFIG_SYS_DPAA_FMAN 649 #define CONFIG_FMAN_ENET 650 #define CONFIG_PHYLIB_10G 651 #define CONFIG_PHY_VITESSE 652 #define CONFIG_PHY_REALTEK 653 #define CONFIG_PHY_TERANETICS 654 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 655 #define SGMII_CARD_PORT2_PHY_ADDR 0x10 656 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 657 #define SGMII_CARD_PORT4_PHY_ADDR 0x11 658 #endif 659 660 #ifdef CONFIG_FMAN_ENET 661 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 662 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 663 664 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 665 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 666 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 667 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 668 669 #define CONFIG_MII /* MII PHY management */ 670 #define CONFIG_ETHPRIME "FM1@DTSEC1" 671 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 672 #endif 673 674 /* 675 * Dynamic MTD Partition support with mtdparts 676 */ 677 #ifndef CONFIG_SYS_NO_FLASH 678 #define CONFIG_MTD_DEVICE 679 #define CONFIG_MTD_PARTITIONS 680 #define CONFIG_CMD_MTDPARTS 681 #define CONFIG_FLASH_CFI_MTD 682 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 683 "spi0=spife110000.0" 684 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 685 "128k(dtb),96m(fs),-(user);"\ 686 "fff800000.flash:2m(uboot),9m(kernel),"\ 687 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 688 "2m(uboot),9m(kernel),128k(dtb),-(user)" 689 #endif 690 691 /* 692 * Environment 693 */ 694 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 695 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 696 697 /* 698 * Command line configuration. 699 */ 700 #include <config_cmd_default.h> 701 702 #define CONFIG_CMD_DATE 703 #define CONFIG_CMD_DHCP 704 #define CONFIG_CMD_EEPROM 705 #define CONFIG_CMD_ELF 706 #define CONFIG_CMD_ERRATA 707 #define CONFIG_CMD_GREPENV 708 #define CONFIG_CMD_IRQ 709 #define CONFIG_CMD_I2C 710 #define CONFIG_CMD_MII 711 #define CONFIG_CMD_PING 712 #define CONFIG_CMD_REGINFO 713 #define CONFIG_CMD_SETEXPR 714 715 #ifdef CONFIG_PCI 716 #define CONFIG_CMD_PCI 717 #define CONFIG_CMD_NET 718 #endif 719 720 /* Hash command with SHA acceleration supported in hardware */ 721 #ifdef CONFIG_FSL_CAAM 722 #define CONFIG_CMD_HASH 723 #define CONFIG_SHA_HW_ACCEL 724 #endif 725 726 /* 727 * Miscellaneous configurable options 728 */ 729 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 730 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 731 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 732 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 733 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 734 #ifdef CONFIG_CMD_KGDB 735 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 736 #else 737 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 738 #endif 739 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 740 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 741 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 742 743 /* 744 * For booting Linux, the board info and command line data 745 * have to be in the first 64 MB of memory, since this is 746 * the maximum mapped by the Linux kernel during initialization. 747 */ 748 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 749 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 750 751 #ifdef CONFIG_CMD_KGDB 752 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 753 #endif 754 755 /* 756 * Environment Configuration 757 */ 758 #define CONFIG_ROOTPATH "/opt/nfsroot" 759 #define CONFIG_BOOTFILE "uImage" 760 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 761 762 /* default location for tftp and bootm */ 763 #define CONFIG_LOADADDR 1000000 764 765 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 766 767 #define CONFIG_BAUDRATE 115200 768 769 #define __USB_PHY_TYPE utmi 770 771 #define CONFIG_EXTRA_ENV_SETTINGS \ 772 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 773 "bank_intlv=cs0_cs1;" \ 774 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 775 "netdev=eth0\0" \ 776 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 777 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 778 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 779 "tftpflash=tftpboot $loadaddr $uboot && " \ 780 "protect off $ubootaddr +$filesize && " \ 781 "erase $ubootaddr +$filesize && " \ 782 "cp.b $loadaddr $ubootaddr $filesize && " \ 783 "protect on $ubootaddr +$filesize && " \ 784 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 785 "consoledev=ttyS0\0" \ 786 "ramdiskaddr=2000000\0" \ 787 "ramdiskfile=t1040qds/ramdisk.uboot\0" \ 788 "fdtaddr=c00000\0" \ 789 "fdtfile=t1040qds/t1040qds.dtb\0" \ 790 "bdev=sda3\0" 791 792 #define CONFIG_LINUX \ 793 "setenv bootargs root=/dev/ram rw " \ 794 "console=$consoledev,$baudrate $othbootargs;" \ 795 "setenv ramdiskaddr 0x02000000;" \ 796 "setenv fdtaddr 0x00c00000;" \ 797 "setenv loadaddr 0x1000000;" \ 798 "bootm $loadaddr $ramdiskaddr $fdtaddr" 799 800 #define CONFIG_HDBOOT \ 801 "setenv bootargs root=/dev/$bdev rw " \ 802 "console=$consoledev,$baudrate $othbootargs;" \ 803 "tftp $loadaddr $bootfile;" \ 804 "tftp $fdtaddr $fdtfile;" \ 805 "bootm $loadaddr - $fdtaddr" 806 807 #define CONFIG_NFSBOOTCOMMAND \ 808 "setenv bootargs root=/dev/nfs rw " \ 809 "nfsroot=$serverip:$rootpath " \ 810 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 811 "console=$consoledev,$baudrate $othbootargs;" \ 812 "tftp $loadaddr $bootfile;" \ 813 "tftp $fdtaddr $fdtfile;" \ 814 "bootm $loadaddr - $fdtaddr" 815 816 #define CONFIG_RAMBOOTCOMMAND \ 817 "setenv bootargs root=/dev/ram rw " \ 818 "console=$consoledev,$baudrate $othbootargs;" \ 819 "tftp $ramdiskaddr $ramdiskfile;" \ 820 "tftp $loadaddr $bootfile;" \ 821 "tftp $fdtaddr $fdtfile;" \ 822 "bootm $loadaddr $ramdiskaddr $fdtaddr" 823 824 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 825 826 #ifdef CONFIG_SECURE_BOOT 827 #include <asm/fsl_secure_boot.h> 828 #define CONFIG_CMD_BLOB 829 #endif 830 831 #endif /* __CONFIG_H */ 832