1 /* 2 * Copyright 2013-2014 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #ifndef __CONFIG_H 24 #define __CONFIG_H 25 26 /* 27 * T1040 QDS board configuration file 28 */ 29 30 #ifdef CONFIG_RAMBOOT_PBL 31 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 32 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg 34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 39 #define CONFIG_MP /* support multiple processors */ 40 41 /* support deep sleep */ 42 #define CONFIG_DEEP_SLEEP 43 44 #ifndef CONFIG_SYS_TEXT_BASE 45 #define CONFIG_SYS_TEXT_BASE 0xeff40000 46 #endif 47 48 #ifndef CONFIG_RESET_VECTOR_ADDRESS 49 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 50 #endif 51 52 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 53 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 54 #define CONFIG_PCI_INDIRECT_BRIDGE 55 #define CONFIG_PCIE1 /* PCIE controller 1 */ 56 #define CONFIG_PCIE2 /* PCIE controller 2 */ 57 #define CONFIG_PCIE3 /* PCIE controller 3 */ 58 #define CONFIG_PCIE4 /* PCIE controller 4 */ 59 60 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 61 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 62 63 #define CONFIG_ENV_OVERWRITE 64 65 #ifndef CONFIG_MTD_NOR_FLASH 66 #define CONFIG_ENV_IS_NOWHERE 67 #else 68 #define CONFIG_FLASH_CFI_DRIVER 69 #define CONFIG_SYS_FLASH_CFI 70 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 71 #endif 72 73 #ifdef CONFIG_MTD_NOR_FLASH 74 #if defined(CONFIG_SPIFLASH) 75 #define CONFIG_SYS_EXTRA_ENV_RELOC 76 #define CONFIG_ENV_IS_IN_SPI_FLASH 77 #define CONFIG_ENV_SPI_BUS 0 78 #define CONFIG_ENV_SPI_CS 0 79 #define CONFIG_ENV_SPI_MAX_HZ 10000000 80 #define CONFIG_ENV_SPI_MODE 0 81 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 82 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 83 #define CONFIG_ENV_SECT_SIZE 0x10000 84 #elif defined(CONFIG_SDCARD) 85 #define CONFIG_SYS_EXTRA_ENV_RELOC 86 #define CONFIG_ENV_IS_IN_MMC 87 #define CONFIG_SYS_MMC_ENV_DEV 0 88 #define CONFIG_ENV_SIZE 0x2000 89 #define CONFIG_ENV_OFFSET (512 * 1658) 90 #elif defined(CONFIG_NAND) 91 #define CONFIG_SYS_EXTRA_ENV_RELOC 92 #define CONFIG_ENV_IS_IN_NAND 93 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 94 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 95 #else 96 #define CONFIG_ENV_IS_IN_FLASH 97 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 98 #define CONFIG_ENV_SIZE 0x2000 99 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 100 #endif 101 #else /* CONFIG_MTD_NOR_FLASH */ 102 #define CONFIG_ENV_SIZE 0x2000 103 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 104 #endif 105 106 #ifndef __ASSEMBLY__ 107 unsigned long get_board_sys_clk(void); 108 unsigned long get_board_ddr_clk(void); 109 #endif 110 111 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 112 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 113 114 /* 115 * These can be toggled for performance analysis, otherwise use default. 116 */ 117 #define CONFIG_SYS_CACHE_STASHING 118 #define CONFIG_BACKSIDE_L2_CACHE 119 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 120 #define CONFIG_BTB /* toggle branch predition */ 121 #define CONFIG_DDR_ECC 122 #ifdef CONFIG_DDR_ECC 123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 124 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 125 #endif 126 127 #define CONFIG_ENABLE_36BIT_PHYS 128 129 #define CONFIG_ADDR_MAP 130 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 131 132 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 133 #define CONFIG_SYS_MEMTEST_END 0x00400000 134 #define CONFIG_SYS_ALT_MEMTEST 135 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 136 137 /* 138 * Config the L3 Cache as L3 SRAM 139 */ 140 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 141 142 #define CONFIG_SYS_DCSRBAR 0xf0000000 143 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 144 145 /* EEPROM */ 146 #define CONFIG_ID_EEPROM 147 #define CONFIG_SYS_I2C_EEPROM_NXID 148 #define CONFIG_SYS_EEPROM_BUS_NUM 0 149 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 150 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 151 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 152 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 153 154 /* 155 * DDR Setup 156 */ 157 #define CONFIG_VERY_BIG_RAM 158 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 159 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 160 161 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 162 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 163 164 #define CONFIG_DDR_SPD 165 #define CONFIG_FSL_DDR_INTERACTIVE 166 167 #define CONFIG_SYS_SPD_BUS_NUM 0 168 #define SPD_EEPROM_ADDRESS 0x51 169 170 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 171 172 /* 173 * IFC Definitions 174 */ 175 #define CONFIG_SYS_FLASH_BASE 0xe0000000 176 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 177 178 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 179 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 180 + 0x8000000) | \ 181 CSPR_PORT_SIZE_16 | \ 182 CSPR_MSEL_NOR | \ 183 CSPR_V) 184 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 185 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 186 CSPR_PORT_SIZE_16 | \ 187 CSPR_MSEL_NOR | \ 188 CSPR_V) 189 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 190 191 /* 192 * TDM Definition 193 */ 194 #define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 195 196 /* NOR Flash Timing Params */ 197 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 198 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 199 FTIM0_NOR_TEADC(0x5) | \ 200 FTIM0_NOR_TEAHC(0x5)) 201 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 202 FTIM1_NOR_TRAD_NOR(0x1A) |\ 203 FTIM1_NOR_TSEQRAD_NOR(0x13)) 204 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 205 FTIM2_NOR_TCH(0x4) | \ 206 FTIM2_NOR_TWPH(0x0E) | \ 207 FTIM2_NOR_TWP(0x1c)) 208 #define CONFIG_SYS_NOR_FTIM3 0x0 209 210 #define CONFIG_SYS_FLASH_QUIET_TEST 211 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 212 213 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 214 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 215 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 216 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 217 218 #define CONFIG_SYS_FLASH_EMPTY_INFO 219 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 220 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 221 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 222 #define QIXIS_BASE 0xffdf0000 223 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 224 #define QIXIS_LBMAP_SWITCH 0x06 225 #define QIXIS_LBMAP_MASK 0x0f 226 #define QIXIS_LBMAP_SHIFT 0 227 #define QIXIS_LBMAP_DFLTBANK 0x00 228 #define QIXIS_LBMAP_ALTBANK 0x04 229 #define QIXIS_RST_CTL_RESET 0x31 230 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 231 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 232 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 233 #define QIXIS_RST_FORCE_MEM 0x01 234 235 #define CONFIG_SYS_CSPR3_EXT (0xf) 236 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 237 | CSPR_PORT_SIZE_8 \ 238 | CSPR_MSEL_GPCM \ 239 | CSPR_V) 240 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 241 #define CONFIG_SYS_CSOR3 0x0 242 /* QIXIS Timing parameters for IFC CS3 */ 243 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 244 FTIM0_GPCM_TEADC(0x0e) | \ 245 FTIM0_GPCM_TEAHC(0x0e)) 246 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 247 FTIM1_GPCM_TRAD(0x3f)) 248 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 249 FTIM2_GPCM_TCH(0x8) | \ 250 FTIM2_GPCM_TWP(0x1f)) 251 #define CONFIG_SYS_CS3_FTIM3 0x0 252 253 #define CONFIG_NAND_FSL_IFC 254 #define CONFIG_SYS_NAND_BASE 0xff800000 255 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 256 257 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 258 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 259 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 260 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 261 | CSPR_V) 262 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 263 264 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 265 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 266 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 267 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 268 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 269 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 270 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 271 272 #define CONFIG_SYS_NAND_ONFI_DETECTION 273 274 /* ONFI NAND Flash mode0 Timing Params */ 275 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 276 FTIM0_NAND_TWP(0x18) | \ 277 FTIM0_NAND_TWCHT(0x07) | \ 278 FTIM0_NAND_TWH(0x0a)) 279 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 280 FTIM1_NAND_TWBE(0x39) | \ 281 FTIM1_NAND_TRR(0x0e) | \ 282 FTIM1_NAND_TRP(0x18)) 283 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 284 FTIM2_NAND_TREH(0x0a) | \ 285 FTIM2_NAND_TWHRE(0x1e)) 286 #define CONFIG_SYS_NAND_FTIM3 0x0 287 288 #define CONFIG_SYS_NAND_DDR_LAW 11 289 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 290 #define CONFIG_SYS_MAX_NAND_DEVICE 1 291 #define CONFIG_CMD_NAND 292 293 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 294 295 #if defined(CONFIG_NAND) 296 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 297 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 298 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 299 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 300 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 301 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 302 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 303 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 304 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 305 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 306 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 307 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 308 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 309 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 310 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 311 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 312 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 313 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 314 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 315 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 316 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 317 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 318 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 319 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 320 #else 321 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 322 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 323 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 324 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 325 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 326 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 327 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 328 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 329 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 330 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 331 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 332 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 333 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 334 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 335 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 336 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 337 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 338 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 339 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 340 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 341 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 342 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 343 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 344 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 345 #endif 346 347 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 348 349 #if defined(CONFIG_RAMBOOT_PBL) 350 #define CONFIG_SYS_RAMBOOT 351 #endif 352 353 #define CONFIG_BOARD_EARLY_INIT_R 354 #define CONFIG_MISC_INIT_R 355 356 #define CONFIG_HWCONFIG 357 358 /* define to use L1 as initial stack */ 359 #define CONFIG_L1_INIT_RAM 360 #define CONFIG_SYS_INIT_RAM_LOCK 361 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 362 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 363 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 364 /* The assembler doesn't like typecast */ 365 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 366 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 367 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 368 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 369 370 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 371 GENERATED_GBL_DATA_SIZE) 372 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 373 374 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 375 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 376 377 /* Serial Port - controlled on board with jumper J8 378 * open - index 2 379 * shorted - index 1 380 */ 381 #define CONFIG_CONS_INDEX 1 382 #define CONFIG_SYS_NS16550_SERIAL 383 #define CONFIG_SYS_NS16550_REG_SIZE 1 384 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 385 386 #define CONFIG_SYS_BAUDRATE_TABLE \ 387 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 388 389 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 390 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 391 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 392 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 393 394 /* Video */ 395 #define CONFIG_FSL_DIU_FB 396 #ifdef CONFIG_FSL_DIU_FB 397 #define CONFIG_FSL_DIU_CH7301 398 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 399 #define CONFIG_VIDEO_LOGO 400 #define CONFIG_VIDEO_BMP_LOGO 401 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 402 /* 403 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 404 * disable empty flash sector detection, which is I/O-intensive. 405 */ 406 #undef CONFIG_SYS_FLASH_EMPTY_INFO 407 #endif 408 409 /* I2C */ 410 #define CONFIG_SYS_I2C 411 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 412 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 413 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 414 #define CONFIG_SYS_FSL_I2C3_SPEED 50000 415 #define CONFIG_SYS_FSL_I2C4_SPEED 50000 416 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 417 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 418 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 419 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 420 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 421 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 422 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 423 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 424 425 #define I2C_MUX_PCA_ADDR 0x77 426 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 427 428 /* I2C bus multiplexer */ 429 #define I2C_MUX_CH_DEFAULT 0x8 430 #define I2C_MUX_CH_DIU 0xC 431 432 /* LDI/DVI Encoder for display */ 433 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 434 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 435 436 /* 437 * RTC configuration 438 */ 439 #define RTC 440 #define CONFIG_RTC_DS3231 1 441 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 442 443 /* 444 * eSPI - Enhanced SPI 445 */ 446 #define CONFIG_SF_DEFAULT_SPEED 10000000 447 #define CONFIG_SF_DEFAULT_MODE 0 448 449 /* 450 * General PCI 451 * Memory space is mapped 1-1, but I/O space must start from 0. 452 */ 453 454 #ifdef CONFIG_PCI 455 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 456 #ifdef CONFIG_PCIE1 457 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 458 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 459 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 460 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 461 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 462 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 463 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 464 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 465 #endif 466 467 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 468 #ifdef CONFIG_PCIE2 469 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 470 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 471 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 472 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 473 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 474 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 475 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 476 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 477 #endif 478 479 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 480 #ifdef CONFIG_PCIE3 481 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 482 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 483 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 484 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 485 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 486 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 487 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 488 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 489 #endif 490 491 /* controller 4, Base address 203000 */ 492 #ifdef CONFIG_PCIE4 493 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 494 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 495 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 496 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 497 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 498 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 499 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 500 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 501 #endif 502 503 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 504 #endif /* CONFIG_PCI */ 505 506 /* SATA */ 507 #define CONFIG_FSL_SATA_V2 508 #ifdef CONFIG_FSL_SATA_V2 509 #define CONFIG_LIBATA 510 #define CONFIG_FSL_SATA 511 512 #define CONFIG_SYS_SATA_MAX_DEVICE 2 513 #define CONFIG_SATA1 514 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 515 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 516 #define CONFIG_SATA2 517 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 518 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 519 520 #define CONFIG_LBA48 521 #define CONFIG_CMD_SATA 522 #endif 523 524 /* 525 * USB 526 */ 527 #define CONFIG_HAS_FSL_DR_USB 528 529 #ifdef CONFIG_HAS_FSL_DR_USB 530 #ifdef CONFIG_USB_EHCI_HCD 531 #define CONFIG_USB_EHCI_FSL 532 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 533 #endif 534 #endif 535 536 #ifdef CONFIG_MMC 537 #define CONFIG_FSL_ESDHC 538 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK 539 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 540 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT 541 #endif 542 543 /* Qman/Bman */ 544 #ifndef CONFIG_NOBQFMAN 545 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 546 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 547 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 548 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 549 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 550 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 551 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 552 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 553 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 554 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 555 CONFIG_SYS_BMAN_CENA_SIZE) 556 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 557 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 558 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 559 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 560 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 561 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 562 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 563 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 564 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 565 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 566 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 567 CONFIG_SYS_QMAN_CENA_SIZE) 568 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 569 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 570 571 #define CONFIG_SYS_DPAA_FMAN 572 #define CONFIG_SYS_DPAA_PME 573 574 #define CONFIG_QE 575 #define CONFIG_U_QE 576 /* Default address of microcode for the Linux Fman driver */ 577 #if defined(CONFIG_SPIFLASH) 578 /* 579 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 580 * env, so we got 0x110000. 581 */ 582 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 583 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 584 #elif defined(CONFIG_SDCARD) 585 /* 586 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 587 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 588 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 589 */ 590 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 591 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 592 #elif defined(CONFIG_NAND) 593 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 594 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 595 #else 596 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 597 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 598 #define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 599 #endif 600 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 601 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 602 #endif /* CONFIG_NOBQFMAN */ 603 604 #ifdef CONFIG_SYS_DPAA_FMAN 605 #define CONFIG_FMAN_ENET 606 #define CONFIG_PHYLIB_10G 607 #define CONFIG_PHY_VITESSE 608 #define CONFIG_PHY_REALTEK 609 #define CONFIG_PHY_TERANETICS 610 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 611 #define SGMII_CARD_PORT2_PHY_ADDR 0x10 612 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 613 #define SGMII_CARD_PORT4_PHY_ADDR 0x11 614 #endif 615 616 #ifdef CONFIG_FMAN_ENET 617 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 618 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 619 620 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 621 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 622 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 623 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 624 625 #define CONFIG_MII /* MII PHY management */ 626 #define CONFIG_ETHPRIME "FM1@DTSEC1" 627 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 628 #endif 629 630 /* Enable VSC9953 L2 Switch driver */ 631 #define CONFIG_VSC9953 632 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 633 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 634 635 /* 636 * Dynamic MTD Partition support with mtdparts 637 */ 638 #ifdef CONFIG_MTD_NOR_FLASH 639 #define CONFIG_MTD_DEVICE 640 #define CONFIG_MTD_PARTITIONS 641 #define CONFIG_CMD_MTDPARTS 642 #define CONFIG_FLASH_CFI_MTD 643 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 644 "spi0=spife110000.0" 645 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 646 "128k(dtb),96m(fs),-(user);"\ 647 "fff800000.flash:2m(uboot),9m(kernel),"\ 648 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 649 "2m(uboot),9m(kernel),128k(dtb),-(user)" 650 #endif 651 652 /* 653 * Environment 654 */ 655 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 656 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 657 658 /* 659 * Command line configuration. 660 */ 661 #define CONFIG_CMD_REGINFO 662 663 #ifdef CONFIG_PCI 664 #define CONFIG_CMD_PCI 665 #endif 666 667 /* 668 * Miscellaneous configurable options 669 */ 670 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 671 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 672 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 673 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 674 #ifdef CONFIG_CMD_KGDB 675 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 676 #else 677 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 678 #endif 679 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 680 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 681 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 682 683 /* 684 * For booting Linux, the board info and command line data 685 * have to be in the first 64 MB of memory, since this is 686 * the maximum mapped by the Linux kernel during initialization. 687 */ 688 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 689 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 690 691 #ifdef CONFIG_CMD_KGDB 692 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 693 #endif 694 695 /* 696 * Environment Configuration 697 */ 698 #define CONFIG_ROOTPATH "/opt/nfsroot" 699 #define CONFIG_BOOTFILE "uImage" 700 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 701 702 /* default location for tftp and bootm */ 703 #define CONFIG_LOADADDR 1000000 704 705 #define __USB_PHY_TYPE utmi 706 707 #define CONFIG_EXTRA_ENV_SETTINGS \ 708 "hwconfig=fsl_ddr:bank_intlv=auto;" \ 709 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 710 "netdev=eth0\0" \ 711 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 712 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 713 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 714 "tftpflash=tftpboot $loadaddr $uboot && " \ 715 "protect off $ubootaddr +$filesize && " \ 716 "erase $ubootaddr +$filesize && " \ 717 "cp.b $loadaddr $ubootaddr $filesize && " \ 718 "protect on $ubootaddr +$filesize && " \ 719 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 720 "consoledev=ttyS0\0" \ 721 "ramdiskaddr=2000000\0" \ 722 "ramdiskfile=t1040qds/ramdisk.uboot\0" \ 723 "fdtaddr=1e00000\0" \ 724 "fdtfile=t1040qds/t1040qds.dtb\0" \ 725 "bdev=sda3\0" 726 727 #define CONFIG_LINUX \ 728 "setenv bootargs root=/dev/ram rw " \ 729 "console=$consoledev,$baudrate $othbootargs;" \ 730 "setenv ramdiskaddr 0x02000000;" \ 731 "setenv fdtaddr 0x00c00000;" \ 732 "setenv loadaddr 0x1000000;" \ 733 "bootm $loadaddr $ramdiskaddr $fdtaddr" 734 735 #define CONFIG_HDBOOT \ 736 "setenv bootargs root=/dev/$bdev rw " \ 737 "console=$consoledev,$baudrate $othbootargs;" \ 738 "tftp $loadaddr $bootfile;" \ 739 "tftp $fdtaddr $fdtfile;" \ 740 "bootm $loadaddr - $fdtaddr" 741 742 #define CONFIG_NFSBOOTCOMMAND \ 743 "setenv bootargs root=/dev/nfs rw " \ 744 "nfsroot=$serverip:$rootpath " \ 745 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 746 "console=$consoledev,$baudrate $othbootargs;" \ 747 "tftp $loadaddr $bootfile;" \ 748 "tftp $fdtaddr $fdtfile;" \ 749 "bootm $loadaddr - $fdtaddr" 750 751 #define CONFIG_RAMBOOTCOMMAND \ 752 "setenv bootargs root=/dev/ram rw " \ 753 "console=$consoledev,$baudrate $othbootargs;" \ 754 "tftp $ramdiskaddr $ramdiskfile;" \ 755 "tftp $loadaddr $bootfile;" \ 756 "tftp $fdtaddr $fdtfile;" \ 757 "bootm $loadaddr $ramdiskaddr $fdtaddr" 758 759 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 760 761 #include <asm/fsl_secure_boot.h> 762 763 #endif /* __CONFIG_H */ 764