1 /* 2 * Copyright 2013-2014 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 #ifndef __CONFIG_H 24 #define __CONFIG_H 25 26 /* 27 * T1040 QDS board configuration file 28 */ 29 30 #ifdef CONFIG_RAMBOOT_PBL 31 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 32 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg 34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg 35 #endif 36 37 /* High Level Configuration Options */ 38 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 39 #define CONFIG_MP /* support multiple processors */ 40 41 /* support deep sleep */ 42 #define CONFIG_DEEP_SLEEP 43 44 #ifndef CONFIG_SYS_TEXT_BASE 45 #define CONFIG_SYS_TEXT_BASE 0xeff40000 46 #endif 47 48 #ifndef CONFIG_RESET_VECTOR_ADDRESS 49 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 50 #endif 51 52 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 53 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 54 #define CONFIG_PCI_INDIRECT_BRIDGE 55 #define CONFIG_PCIE1 /* PCIE controller 1 */ 56 #define CONFIG_PCIE2 /* PCIE controller 2 */ 57 #define CONFIG_PCIE3 /* PCIE controller 3 */ 58 #define CONFIG_PCIE4 /* PCIE controller 4 */ 59 60 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 61 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 62 63 #define CONFIG_ENV_OVERWRITE 64 65 #ifndef CONFIG_MTD_NOR_FLASH 66 #else 67 #define CONFIG_FLASH_CFI_DRIVER 68 #define CONFIG_SYS_FLASH_CFI 69 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 70 #endif 71 72 #ifdef CONFIG_MTD_NOR_FLASH 73 #if defined(CONFIG_SPIFLASH) 74 #define CONFIG_SYS_EXTRA_ENV_RELOC 75 #define CONFIG_ENV_SPI_BUS 0 76 #define CONFIG_ENV_SPI_CS 0 77 #define CONFIG_ENV_SPI_MAX_HZ 10000000 78 #define CONFIG_ENV_SPI_MODE 0 79 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 80 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 81 #define CONFIG_ENV_SECT_SIZE 0x10000 82 #elif defined(CONFIG_SDCARD) 83 #define CONFIG_SYS_EXTRA_ENV_RELOC 84 #define CONFIG_SYS_MMC_ENV_DEV 0 85 #define CONFIG_ENV_SIZE 0x2000 86 #define CONFIG_ENV_OFFSET (512 * 1658) 87 #elif defined(CONFIG_NAND) 88 #define CONFIG_SYS_EXTRA_ENV_RELOC 89 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 90 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 91 #else 92 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 93 #define CONFIG_ENV_SIZE 0x2000 94 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 95 #endif 96 #else /* CONFIG_MTD_NOR_FLASH */ 97 #define CONFIG_ENV_SIZE 0x2000 98 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 99 #endif 100 101 #ifndef __ASSEMBLY__ 102 unsigned long get_board_sys_clk(void); 103 unsigned long get_board_ddr_clk(void); 104 #endif 105 106 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 107 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 108 109 /* 110 * These can be toggled for performance analysis, otherwise use default. 111 */ 112 #define CONFIG_SYS_CACHE_STASHING 113 #define CONFIG_BACKSIDE_L2_CACHE 114 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 115 #define CONFIG_BTB /* toggle branch predition */ 116 #define CONFIG_DDR_ECC 117 #ifdef CONFIG_DDR_ECC 118 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 119 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 120 #endif 121 122 #define CONFIG_ENABLE_36BIT_PHYS 123 124 #define CONFIG_ADDR_MAP 125 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 126 127 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 128 #define CONFIG_SYS_MEMTEST_END 0x00400000 129 #define CONFIG_SYS_ALT_MEMTEST 130 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 131 132 /* 133 * Config the L3 Cache as L3 SRAM 134 */ 135 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 136 137 #define CONFIG_SYS_DCSRBAR 0xf0000000 138 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 139 140 /* EEPROM */ 141 #define CONFIG_ID_EEPROM 142 #define CONFIG_SYS_I2C_EEPROM_NXID 143 #define CONFIG_SYS_EEPROM_BUS_NUM 0 144 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 145 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 146 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 147 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 148 149 /* 150 * DDR Setup 151 */ 152 #define CONFIG_VERY_BIG_RAM 153 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 154 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 155 156 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 157 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 158 159 #define CONFIG_DDR_SPD 160 #define CONFIG_FSL_DDR_INTERACTIVE 161 162 #define CONFIG_SYS_SPD_BUS_NUM 0 163 #define SPD_EEPROM_ADDRESS 0x51 164 165 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 166 167 /* 168 * IFC Definitions 169 */ 170 #define CONFIG_SYS_FLASH_BASE 0xe0000000 171 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 172 173 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 174 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 175 + 0x8000000) | \ 176 CSPR_PORT_SIZE_16 | \ 177 CSPR_MSEL_NOR | \ 178 CSPR_V) 179 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 180 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 181 CSPR_PORT_SIZE_16 | \ 182 CSPR_MSEL_NOR | \ 183 CSPR_V) 184 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 185 186 /* 187 * TDM Definition 188 */ 189 #define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000 190 191 /* NOR Flash Timing Params */ 192 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 193 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 194 FTIM0_NOR_TEADC(0x5) | \ 195 FTIM0_NOR_TEAHC(0x5)) 196 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 197 FTIM1_NOR_TRAD_NOR(0x1A) |\ 198 FTIM1_NOR_TSEQRAD_NOR(0x13)) 199 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 200 FTIM2_NOR_TCH(0x4) | \ 201 FTIM2_NOR_TWPH(0x0E) | \ 202 FTIM2_NOR_TWP(0x1c)) 203 #define CONFIG_SYS_NOR_FTIM3 0x0 204 205 #define CONFIG_SYS_FLASH_QUIET_TEST 206 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 207 208 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 209 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 210 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 211 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 212 213 #define CONFIG_SYS_FLASH_EMPTY_INFO 214 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 215 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 216 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 217 #define QIXIS_BASE 0xffdf0000 218 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 219 #define QIXIS_LBMAP_SWITCH 0x06 220 #define QIXIS_LBMAP_MASK 0x0f 221 #define QIXIS_LBMAP_SHIFT 0 222 #define QIXIS_LBMAP_DFLTBANK 0x00 223 #define QIXIS_LBMAP_ALTBANK 0x04 224 #define QIXIS_RST_CTL_RESET 0x31 225 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 226 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 227 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 228 #define QIXIS_RST_FORCE_MEM 0x01 229 230 #define CONFIG_SYS_CSPR3_EXT (0xf) 231 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 232 | CSPR_PORT_SIZE_8 \ 233 | CSPR_MSEL_GPCM \ 234 | CSPR_V) 235 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 236 #define CONFIG_SYS_CSOR3 0x0 237 /* QIXIS Timing parameters for IFC CS3 */ 238 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 239 FTIM0_GPCM_TEADC(0x0e) | \ 240 FTIM0_GPCM_TEAHC(0x0e)) 241 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 242 FTIM1_GPCM_TRAD(0x3f)) 243 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 244 FTIM2_GPCM_TCH(0x8) | \ 245 FTIM2_GPCM_TWP(0x1f)) 246 #define CONFIG_SYS_CS3_FTIM3 0x0 247 248 #define CONFIG_NAND_FSL_IFC 249 #define CONFIG_SYS_NAND_BASE 0xff800000 250 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 251 252 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 253 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 254 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 255 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 256 | CSPR_V) 257 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 258 259 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 260 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 261 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 262 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 263 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 264 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 265 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 266 267 #define CONFIG_SYS_NAND_ONFI_DETECTION 268 269 /* ONFI NAND Flash mode0 Timing Params */ 270 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 271 FTIM0_NAND_TWP(0x18) | \ 272 FTIM0_NAND_TWCHT(0x07) | \ 273 FTIM0_NAND_TWH(0x0a)) 274 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 275 FTIM1_NAND_TWBE(0x39) | \ 276 FTIM1_NAND_TRR(0x0e) | \ 277 FTIM1_NAND_TRP(0x18)) 278 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 279 FTIM2_NAND_TREH(0x0a) | \ 280 FTIM2_NAND_TWHRE(0x1e)) 281 #define CONFIG_SYS_NAND_FTIM3 0x0 282 283 #define CONFIG_SYS_NAND_DDR_LAW 11 284 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 285 #define CONFIG_SYS_MAX_NAND_DEVICE 1 286 287 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 288 289 #if defined(CONFIG_NAND) 290 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 291 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 292 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 293 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 294 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 295 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 296 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 297 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 298 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 299 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 300 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 301 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 302 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 303 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 304 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 305 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 306 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 307 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 308 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 309 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 310 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 311 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 312 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 313 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 314 #else 315 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 316 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 317 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 318 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 319 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 320 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 321 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 322 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 323 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 324 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 325 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 326 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 327 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 328 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 329 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 330 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 331 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 332 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 333 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 334 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 335 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 336 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 337 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 338 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 339 #endif 340 341 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 342 343 #if defined(CONFIG_RAMBOOT_PBL) 344 #define CONFIG_SYS_RAMBOOT 345 #endif 346 347 #define CONFIG_BOARD_EARLY_INIT_R 348 #define CONFIG_MISC_INIT_R 349 350 #define CONFIG_HWCONFIG 351 352 /* define to use L1 as initial stack */ 353 #define CONFIG_L1_INIT_RAM 354 #define CONFIG_SYS_INIT_RAM_LOCK 355 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 356 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 357 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 358 /* The assembler doesn't like typecast */ 359 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 360 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 361 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 362 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 363 364 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 365 GENERATED_GBL_DATA_SIZE) 366 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 367 368 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 369 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 370 371 /* Serial Port - controlled on board with jumper J8 372 * open - index 2 373 * shorted - index 1 374 */ 375 #define CONFIG_CONS_INDEX 1 376 #define CONFIG_SYS_NS16550_SERIAL 377 #define CONFIG_SYS_NS16550_REG_SIZE 1 378 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 379 380 #define CONFIG_SYS_BAUDRATE_TABLE \ 381 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 382 383 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 384 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 385 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 386 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 387 388 /* Video */ 389 #define CONFIG_FSL_DIU_FB 390 #ifdef CONFIG_FSL_DIU_FB 391 #define CONFIG_FSL_DIU_CH7301 392 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 393 #define CONFIG_VIDEO_LOGO 394 #define CONFIG_VIDEO_BMP_LOGO 395 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 396 /* 397 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 398 * disable empty flash sector detection, which is I/O-intensive. 399 */ 400 #undef CONFIG_SYS_FLASH_EMPTY_INFO 401 #endif 402 403 /* I2C */ 404 #define CONFIG_SYS_I2C 405 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 406 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 407 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 408 #define CONFIG_SYS_FSL_I2C3_SPEED 50000 409 #define CONFIG_SYS_FSL_I2C4_SPEED 50000 410 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 411 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 412 #define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F 413 #define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F 414 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 415 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 416 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 417 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 418 419 #define I2C_MUX_PCA_ADDR 0x77 420 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 421 422 /* I2C bus multiplexer */ 423 #define I2C_MUX_CH_DEFAULT 0x8 424 #define I2C_MUX_CH_DIU 0xC 425 426 /* LDI/DVI Encoder for display */ 427 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 428 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 429 430 /* 431 * RTC configuration 432 */ 433 #define RTC 434 #define CONFIG_RTC_DS3231 1 435 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 436 437 /* 438 * eSPI - Enhanced SPI 439 */ 440 #define CONFIG_SF_DEFAULT_SPEED 10000000 441 #define CONFIG_SF_DEFAULT_MODE 0 442 443 /* 444 * General PCI 445 * Memory space is mapped 1-1, but I/O space must start from 0. 446 */ 447 448 #ifdef CONFIG_PCI 449 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 450 #ifdef CONFIG_PCIE1 451 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 452 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 453 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 454 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 455 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 456 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 457 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 458 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 459 #endif 460 461 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 462 #ifdef CONFIG_PCIE2 463 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 464 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 465 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 466 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 467 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 468 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 469 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 470 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 471 #endif 472 473 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 474 #ifdef CONFIG_PCIE3 475 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 476 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 477 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 478 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 479 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 480 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 481 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 482 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 483 #endif 484 485 /* controller 4, Base address 203000 */ 486 #ifdef CONFIG_PCIE4 487 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 488 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 489 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 490 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 491 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 492 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 493 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 494 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 495 #endif 496 497 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 498 #endif /* CONFIG_PCI */ 499 500 /* SATA */ 501 #define CONFIG_FSL_SATA_V2 502 #ifdef CONFIG_FSL_SATA_V2 503 #define CONFIG_LIBATA 504 #define CONFIG_FSL_SATA 505 506 #define CONFIG_SYS_SATA_MAX_DEVICE 2 507 #define CONFIG_SATA1 508 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 509 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 510 #define CONFIG_SATA2 511 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 512 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 513 514 #define CONFIG_LBA48 515 #endif 516 517 /* 518 * USB 519 */ 520 #define CONFIG_HAS_FSL_DR_USB 521 522 #ifdef CONFIG_HAS_FSL_DR_USB 523 #ifdef CONFIG_USB_EHCI_HCD 524 #define CONFIG_USB_EHCI_FSL 525 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 526 #endif 527 #endif 528 529 #ifdef CONFIG_MMC 530 #define CONFIG_FSL_ESDHC 531 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK 532 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 533 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT 534 #endif 535 536 /* Qman/Bman */ 537 #ifndef CONFIG_NOBQFMAN 538 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 539 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 540 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 541 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 542 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 543 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 544 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 545 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 546 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 547 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 548 CONFIG_SYS_BMAN_CENA_SIZE) 549 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 550 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 551 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 552 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 553 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 554 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 555 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 556 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 557 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 558 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 559 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 560 CONFIG_SYS_QMAN_CENA_SIZE) 561 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 562 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 563 564 #define CONFIG_SYS_DPAA_FMAN 565 #define CONFIG_SYS_DPAA_PME 566 567 #define CONFIG_QE 568 #define CONFIG_U_QE 569 /* Default address of microcode for the Linux Fman driver */ 570 #if defined(CONFIG_SPIFLASH) 571 /* 572 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 573 * env, so we got 0x110000. 574 */ 575 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 576 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 577 #elif defined(CONFIG_SDCARD) 578 /* 579 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 580 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 581 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 582 */ 583 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 584 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 585 #elif defined(CONFIG_NAND) 586 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 587 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 588 #else 589 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 590 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 591 #define CONFIG_SYS_QE_FW_ADDR 0xEFF10000 592 #endif 593 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 594 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 595 #endif /* CONFIG_NOBQFMAN */ 596 597 #ifdef CONFIG_SYS_DPAA_FMAN 598 #define CONFIG_FMAN_ENET 599 #define CONFIG_PHYLIB_10G 600 #define CONFIG_PHY_VITESSE 601 #define CONFIG_PHY_REALTEK 602 #define CONFIG_PHY_TERANETICS 603 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 604 #define SGMII_CARD_PORT2_PHY_ADDR 0x10 605 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 606 #define SGMII_CARD_PORT4_PHY_ADDR 0x11 607 #endif 608 609 #ifdef CONFIG_FMAN_ENET 610 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x01 611 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x02 612 613 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 614 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 615 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 616 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 617 618 #define CONFIG_MII /* MII PHY management */ 619 #define CONFIG_ETHPRIME "FM1@DTSEC1" 620 #endif 621 622 /* Enable VSC9953 L2 Switch driver */ 623 #define CONFIG_VSC9953 624 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14 625 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18 626 627 /* 628 * Dynamic MTD Partition support with mtdparts 629 */ 630 #ifdef CONFIG_MTD_NOR_FLASH 631 #define CONFIG_MTD_DEVICE 632 #define CONFIG_MTD_PARTITIONS 633 #define CONFIG_FLASH_CFI_MTD 634 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 635 "spi0=spife110000.0" 636 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 637 "128k(dtb),96m(fs),-(user);"\ 638 "fff800000.flash:2m(uboot),9m(kernel),"\ 639 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 640 "2m(uboot),9m(kernel),128k(dtb),-(user)" 641 #endif 642 643 /* 644 * Environment 645 */ 646 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 647 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 648 649 /* 650 * Miscellaneous configurable options 651 */ 652 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 653 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 654 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 655 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 656 #ifdef CONFIG_CMD_KGDB 657 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 658 #else 659 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 660 #endif 661 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 662 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 663 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 664 665 /* 666 * For booting Linux, the board info and command line data 667 * have to be in the first 64 MB of memory, since this is 668 * the maximum mapped by the Linux kernel during initialization. 669 */ 670 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 671 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 672 673 #ifdef CONFIG_CMD_KGDB 674 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 675 #endif 676 677 /* 678 * Environment Configuration 679 */ 680 #define CONFIG_ROOTPATH "/opt/nfsroot" 681 #define CONFIG_BOOTFILE "uImage" 682 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 683 684 /* default location for tftp and bootm */ 685 #define CONFIG_LOADADDR 1000000 686 687 #define __USB_PHY_TYPE utmi 688 689 #define CONFIG_EXTRA_ENV_SETTINGS \ 690 "hwconfig=fsl_ddr:bank_intlv=auto;" \ 691 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 692 "netdev=eth0\0" \ 693 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 694 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 695 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 696 "tftpflash=tftpboot $loadaddr $uboot && " \ 697 "protect off $ubootaddr +$filesize && " \ 698 "erase $ubootaddr +$filesize && " \ 699 "cp.b $loadaddr $ubootaddr $filesize && " \ 700 "protect on $ubootaddr +$filesize && " \ 701 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 702 "consoledev=ttyS0\0" \ 703 "ramdiskaddr=2000000\0" \ 704 "ramdiskfile=t1040qds/ramdisk.uboot\0" \ 705 "fdtaddr=1e00000\0" \ 706 "fdtfile=t1040qds/t1040qds.dtb\0" \ 707 "bdev=sda3\0" 708 709 #define CONFIG_LINUX \ 710 "setenv bootargs root=/dev/ram rw " \ 711 "console=$consoledev,$baudrate $othbootargs;" \ 712 "setenv ramdiskaddr 0x02000000;" \ 713 "setenv fdtaddr 0x00c00000;" \ 714 "setenv loadaddr 0x1000000;" \ 715 "bootm $loadaddr $ramdiskaddr $fdtaddr" 716 717 #define CONFIG_HDBOOT \ 718 "setenv bootargs root=/dev/$bdev rw " \ 719 "console=$consoledev,$baudrate $othbootargs;" \ 720 "tftp $loadaddr $bootfile;" \ 721 "tftp $fdtaddr $fdtfile;" \ 722 "bootm $loadaddr - $fdtaddr" 723 724 #define CONFIG_NFSBOOTCOMMAND \ 725 "setenv bootargs root=/dev/nfs rw " \ 726 "nfsroot=$serverip:$rootpath " \ 727 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 728 "console=$consoledev,$baudrate $othbootargs;" \ 729 "tftp $loadaddr $bootfile;" \ 730 "tftp $fdtaddr $fdtfile;" \ 731 "bootm $loadaddr - $fdtaddr" 732 733 #define CONFIG_RAMBOOTCOMMAND \ 734 "setenv bootargs root=/dev/ram rw " \ 735 "console=$consoledev,$baudrate $othbootargs;" \ 736 "tftp $ramdiskaddr $ramdiskfile;" \ 737 "tftp $loadaddr $bootfile;" \ 738 "tftp $fdtaddr $fdtfile;" \ 739 "bootm $loadaddr $ramdiskaddr $fdtaddr" 740 741 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 742 743 #include <asm/fsl_secure_boot.h> 744 745 #endif /* __CONFIG_H */ 746