1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 RDB board configuration file 9 */ 10 11 #ifndef __T1024RDB_H 12 #define __T1024RDB_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 16 #define CONFIG_MP /* support multiple processors */ 17 #define CONFIG_ENABLE_36BIT_PHYS 18 19 #ifdef CONFIG_PHYS_64BIT 20 #define CONFIG_ADDR_MAP 1 21 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 22 #endif 23 24 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 25 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 26 27 #define CONFIG_ENV_OVERWRITE 28 29 /* support deep sleep */ 30 #ifdef CONFIG_ARCH_T1024 31 #define CONFIG_DEEP_SLEEP 32 #endif 33 34 #ifdef CONFIG_RAMBOOT_PBL 35 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 36 #define CONFIG_SPL_FLUSH_IMAGE 37 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 38 #define CONFIG_SYS_TEXT_BASE 0x30001000 39 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 40 #define CONFIG_SPL_PAD_TO 0x40000 41 #define CONFIG_SPL_MAX_SIZE 0x28000 42 #define RESET_VECTOR_OFFSET 0x27FFC 43 #define BOOT_PAGE_OFFSET 0x27000 44 #ifdef CONFIG_SPL_BUILD 45 #define CONFIG_SPL_SKIP_RELOCATE 46 #define CONFIG_SPL_COMMON_INIT_DDR 47 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 48 #endif 49 50 #ifdef CONFIG_NAND 51 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 52 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 53 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 54 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 55 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 56 #if defined(CONFIG_TARGET_T1024RDB) 57 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg 58 #elif defined(CONFIG_TARGET_T1023RDB) 59 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg 60 #endif 61 #define CONFIG_SPL_NAND_BOOT 62 #endif 63 64 #ifdef CONFIG_SPIFLASH 65 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 66 #define CONFIG_SPL_SPI_FLASH_MINIMAL 67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 71 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 72 #ifndef CONFIG_SPL_BUILD 73 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 74 #endif 75 #if defined(CONFIG_TARGET_T1024RDB) 76 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg 77 #elif defined(CONFIG_TARGET_T1023RDB) 78 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg 79 #endif 80 #define CONFIG_SPL_SPI_BOOT 81 #endif 82 83 #ifdef CONFIG_SDCARD 84 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 85 #define CONFIG_SPL_MMC_MINIMAL 86 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 87 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 88 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 89 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 90 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 91 #ifndef CONFIG_SPL_BUILD 92 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 93 #endif 94 #if defined(CONFIG_TARGET_T1024RDB) 95 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg 96 #elif defined(CONFIG_TARGET_T1023RDB) 97 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg 98 #endif 99 #define CONFIG_SPL_MMC_BOOT 100 #endif 101 102 #endif /* CONFIG_RAMBOOT_PBL */ 103 104 #ifndef CONFIG_SYS_TEXT_BASE 105 #define CONFIG_SYS_TEXT_BASE 0xeff40000 106 #endif 107 108 #ifndef CONFIG_RESET_VECTOR_ADDRESS 109 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 110 #endif 111 112 #ifdef CONFIG_MTD_NOR_FLASH 113 #define CONFIG_FLASH_CFI_DRIVER 114 #define CONFIG_SYS_FLASH_CFI 115 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 116 #endif 117 118 /* PCIe Boot - Master */ 119 #define CONFIG_SRIO_PCIE_BOOT_MASTER 120 /* 121 * for slave u-boot IMAGE instored in master memory space, 122 * PHYS must be aligned based on the SIZE 123 */ 124 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 125 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 126 #ifdef CONFIG_PHYS_64BIT 127 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 129 #else 130 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 132 #endif 133 /* 134 * for slave UCODE and ENV instored in master memory space, 135 * PHYS must be aligned based on the SIZE 136 */ 137 #ifdef CONFIG_PHYS_64BIT 138 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 139 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 140 #else 141 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 143 #endif 144 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 145 /* slave core release by master*/ 146 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 147 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 148 149 /* PCIe Boot - Slave */ 150 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 151 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 152 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 153 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 154 /* Set 1M boot space for PCIe boot */ 155 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 156 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 157 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 158 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 159 #endif 160 161 #if defined(CONFIG_SPIFLASH) 162 #define CONFIG_SYS_EXTRA_ENV_RELOC 163 #define CONFIG_ENV_SPI_BUS 0 164 #define CONFIG_ENV_SPI_CS 0 165 #define CONFIG_ENV_SPI_MAX_HZ 10000000 166 #define CONFIG_ENV_SPI_MODE 0 167 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 168 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 169 #if defined(CONFIG_TARGET_T1024RDB) 170 #define CONFIG_ENV_SECT_SIZE 0x10000 171 #elif defined(CONFIG_TARGET_T1023RDB) 172 #define CONFIG_ENV_SECT_SIZE 0x40000 173 #endif 174 #elif defined(CONFIG_SDCARD) 175 #define CONFIG_SYS_EXTRA_ENV_RELOC 176 #define CONFIG_SYS_MMC_ENV_DEV 0 177 #define CONFIG_ENV_SIZE 0x2000 178 #define CONFIG_ENV_OFFSET (512 * 0x800) 179 #elif defined(CONFIG_NAND) 180 #define CONFIG_SYS_EXTRA_ENV_RELOC 181 #define CONFIG_ENV_SIZE 0x2000 182 #if defined(CONFIG_TARGET_T1024RDB) 183 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 184 #elif defined(CONFIG_TARGET_T1023RDB) 185 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 186 #endif 187 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 188 #define CONFIG_ENV_ADDR 0xffe20000 189 #define CONFIG_ENV_SIZE 0x2000 190 #elif defined(CONFIG_ENV_IS_NOWHERE) 191 #define CONFIG_ENV_SIZE 0x2000 192 #else 193 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 194 #define CONFIG_ENV_SIZE 0x2000 195 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 196 #endif 197 198 #ifndef __ASSEMBLY__ 199 unsigned long get_board_sys_clk(void); 200 unsigned long get_board_ddr_clk(void); 201 #endif 202 203 #define CONFIG_SYS_CLK_FREQ 100000000 204 #define CONFIG_DDR_CLK_FREQ 100000000 205 206 /* 207 * These can be toggled for performance analysis, otherwise use default. 208 */ 209 #define CONFIG_SYS_CACHE_STASHING 210 #define CONFIG_BACKSIDE_L2_CACHE 211 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 212 #define CONFIG_BTB /* toggle branch predition */ 213 #define CONFIG_DDR_ECC 214 #ifdef CONFIG_DDR_ECC 215 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 216 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 217 #endif 218 219 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 220 #define CONFIG_SYS_MEMTEST_END 0x00400000 221 #define CONFIG_SYS_ALT_MEMTEST 222 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 223 224 /* 225 * Config the L3 Cache as L3 SRAM 226 */ 227 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 228 #define CONFIG_SYS_L3_SIZE (256 << 10) 229 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 230 #ifdef CONFIG_RAMBOOT_PBL 231 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 232 #endif 233 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 234 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 235 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 236 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 237 238 #ifdef CONFIG_PHYS_64BIT 239 #define CONFIG_SYS_DCSRBAR 0xf0000000 240 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 241 #endif 242 243 /* EEPROM */ 244 #define CONFIG_ID_EEPROM 245 #define CONFIG_SYS_I2C_EEPROM_NXID 246 #define CONFIG_SYS_EEPROM_BUS_NUM 0 247 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 248 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 249 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 250 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 251 252 /* 253 * DDR Setup 254 */ 255 #define CONFIG_VERY_BIG_RAM 256 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 257 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 258 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 259 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 260 #define CONFIG_FSL_DDR_INTERACTIVE 261 #if defined(CONFIG_TARGET_T1024RDB) 262 #define CONFIG_DDR_SPD 263 #define CONFIG_SYS_SPD_BUS_NUM 0 264 #define SPD_EEPROM_ADDRESS 0x51 265 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 266 #elif defined(CONFIG_TARGET_T1023RDB) 267 #define CONFIG_SYS_DDR_RAW_TIMING 268 #define CONFIG_SYS_SDRAM_SIZE 2048 269 #endif 270 271 /* 272 * IFC Definitions 273 */ 274 #define CONFIG_SYS_FLASH_BASE 0xe8000000 275 #ifdef CONFIG_PHYS_64BIT 276 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 277 #else 278 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 279 #endif 280 281 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 282 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 283 CSPR_PORT_SIZE_16 | \ 284 CSPR_MSEL_NOR | \ 285 CSPR_V) 286 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 287 288 /* NOR Flash Timing Params */ 289 #if defined(CONFIG_TARGET_T1024RDB) 290 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 291 #elif defined(CONFIG_TARGET_T1023RDB) 292 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ 293 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 294 #endif 295 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 296 FTIM0_NOR_TEADC(0x5) | \ 297 FTIM0_NOR_TEAHC(0x5)) 298 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 299 FTIM1_NOR_TRAD_NOR(0x1A) |\ 300 FTIM1_NOR_TSEQRAD_NOR(0x13)) 301 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 302 FTIM2_NOR_TCH(0x4) | \ 303 FTIM2_NOR_TWPH(0x0E) | \ 304 FTIM2_NOR_TWP(0x1c)) 305 #define CONFIG_SYS_NOR_FTIM3 0x0 306 307 #define CONFIG_SYS_FLASH_QUIET_TEST 308 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 309 310 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 311 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 312 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 313 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 314 315 #define CONFIG_SYS_FLASH_EMPTY_INFO 316 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 317 318 #ifdef CONFIG_TARGET_T1024RDB 319 /* CPLD on IFC */ 320 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 321 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 322 #define CONFIG_SYS_CSPR2_EXT (0xf) 323 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 324 | CSPR_PORT_SIZE_8 \ 325 | CSPR_MSEL_GPCM \ 326 | CSPR_V) 327 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 328 #define CONFIG_SYS_CSOR2 0x0 329 330 /* CPLD Timing parameters for IFC CS2 */ 331 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 332 FTIM0_GPCM_TEADC(0x0e) | \ 333 FTIM0_GPCM_TEAHC(0x0e)) 334 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 335 FTIM1_GPCM_TRAD(0x1f)) 336 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 337 FTIM2_GPCM_TCH(0x8) | \ 338 FTIM2_GPCM_TWP(0x1f)) 339 #define CONFIG_SYS_CS2_FTIM3 0x0 340 #endif 341 342 /* NAND Flash on IFC */ 343 #define CONFIG_NAND_FSL_IFC 344 #define CONFIG_SYS_NAND_BASE 0xff800000 345 #ifdef CONFIG_PHYS_64BIT 346 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 347 #else 348 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 349 #endif 350 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 351 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 352 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 353 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 354 | CSPR_V) 355 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 356 357 #if defined(CONFIG_TARGET_T1024RDB) 358 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 359 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 360 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 361 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 362 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 363 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 364 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 365 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 366 #elif defined(CONFIG_TARGET_T1023RDB) 367 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 368 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 369 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 370 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 371 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 372 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 373 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 374 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 375 #endif 376 377 #define CONFIG_SYS_NAND_ONFI_DETECTION 378 /* ONFI NAND Flash mode0 Timing Params */ 379 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 380 FTIM0_NAND_TWP(0x18) | \ 381 FTIM0_NAND_TWCHT(0x07) | \ 382 FTIM0_NAND_TWH(0x0a)) 383 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 384 FTIM1_NAND_TWBE(0x39) | \ 385 FTIM1_NAND_TRR(0x0e) | \ 386 FTIM1_NAND_TRP(0x18)) 387 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 388 FTIM2_NAND_TREH(0x0a) | \ 389 FTIM2_NAND_TWHRE(0x1e)) 390 #define CONFIG_SYS_NAND_FTIM3 0x0 391 392 #define CONFIG_SYS_NAND_DDR_LAW 11 393 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 394 #define CONFIG_SYS_MAX_NAND_DEVICE 1 395 396 #if defined(CONFIG_NAND) 397 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 398 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 399 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 400 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 401 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 402 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 403 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 404 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 405 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 406 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 407 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 408 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 409 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 410 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 411 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 412 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 413 #else 414 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 415 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 416 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 417 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 418 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 419 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 420 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 421 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 422 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 423 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 424 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 425 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 426 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 427 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 428 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 429 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 430 #endif 431 432 #ifdef CONFIG_SPL_BUILD 433 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 434 #else 435 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 436 #endif 437 438 #if defined(CONFIG_RAMBOOT_PBL) 439 #define CONFIG_SYS_RAMBOOT 440 #endif 441 442 #define CONFIG_BOARD_EARLY_INIT_R 443 #define CONFIG_MISC_INIT_R 444 445 #define CONFIG_HWCONFIG 446 447 /* define to use L1 as initial stack */ 448 #define CONFIG_L1_INIT_RAM 449 #define CONFIG_SYS_INIT_RAM_LOCK 450 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 451 #ifdef CONFIG_PHYS_64BIT 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 453 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 454 /* The assembler doesn't like typecast */ 455 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 456 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 457 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 458 #else 459 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 460 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 461 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 462 #endif 463 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 464 465 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 466 GENERATED_GBL_DATA_SIZE) 467 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 468 469 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 470 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 471 472 /* Serial Port */ 473 #define CONFIG_CONS_INDEX 1 474 #define CONFIG_SYS_NS16550_SERIAL 475 #define CONFIG_SYS_NS16550_REG_SIZE 1 476 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 477 478 #define CONFIG_SYS_BAUDRATE_TABLE \ 479 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 480 481 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 482 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 483 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 484 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 485 486 /* Video */ 487 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 488 #ifdef CONFIG_FSL_DIU_FB 489 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 490 #define CONFIG_VIDEO_LOGO 491 #define CONFIG_VIDEO_BMP_LOGO 492 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 493 /* 494 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 495 * disable empty flash sector detection, which is I/O-intensive. 496 */ 497 #undef CONFIG_SYS_FLASH_EMPTY_INFO 498 #endif 499 500 /* I2C */ 501 #define CONFIG_SYS_I2C 502 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 503 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 504 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 505 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 506 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 507 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 508 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 509 510 #define I2C_PCA6408_BUS_NUM 1 511 #define I2C_PCA6408_ADDR 0x20 512 513 /* I2C bus multiplexer */ 514 #define I2C_MUX_CH_DEFAULT 0x8 515 516 /* 517 * RTC configuration 518 */ 519 #define RTC 520 #define CONFIG_RTC_DS1337 1 521 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 522 523 /* 524 * eSPI - Enhanced SPI 525 */ 526 #define CONFIG_SPI_FLASH_BAR 527 #define CONFIG_SF_DEFAULT_SPEED 10000000 528 #define CONFIG_SF_DEFAULT_MODE 0 529 530 /* 531 * General PCIe 532 * Memory space is mapped 1-1, but I/O space must start from 0. 533 */ 534 #define CONFIG_PCIE1 /* PCIE controller 1 */ 535 #define CONFIG_PCIE2 /* PCIE controller 2 */ 536 #define CONFIG_PCIE3 /* PCIE controller 3 */ 537 #ifdef CONFIG_ARCH_T1040 538 #define CONFIG_PCIE4 /* PCIE controller 4 */ 539 #endif 540 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 541 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 542 #define CONFIG_PCI_INDIRECT_BRIDGE 543 544 #ifdef CONFIG_PCI 545 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 546 #ifdef CONFIG_PCIE1 547 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 548 #ifdef CONFIG_PHYS_64BIT 549 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 550 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 551 #else 552 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 553 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 554 #endif 555 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 556 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 557 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 558 #ifdef CONFIG_PHYS_64BIT 559 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 560 #else 561 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 562 #endif 563 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 564 #endif 565 566 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 567 #ifdef CONFIG_PCIE2 568 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 569 #ifdef CONFIG_PHYS_64BIT 570 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 571 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 572 #else 573 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 574 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 575 #endif 576 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 577 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 578 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 579 #ifdef CONFIG_PHYS_64BIT 580 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 581 #else 582 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 583 #endif 584 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 585 #endif 586 587 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 588 #ifdef CONFIG_PCIE3 589 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 590 #ifdef CONFIG_PHYS_64BIT 591 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 592 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 593 #else 594 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 595 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 596 #endif 597 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 598 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 599 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 600 #ifdef CONFIG_PHYS_64BIT 601 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 602 #else 603 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 604 #endif 605 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 606 #endif 607 608 /* controller 4, Base address 203000, to be removed */ 609 #ifdef CONFIG_PCIE4 610 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 611 #ifdef CONFIG_PHYS_64BIT 612 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 613 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 614 #else 615 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 616 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 617 #endif 618 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 619 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 620 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 621 #ifdef CONFIG_PHYS_64BIT 622 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 623 #else 624 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 625 #endif 626 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 627 #endif 628 629 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 630 #endif /* CONFIG_PCI */ 631 632 /* 633 * USB 634 */ 635 #define CONFIG_HAS_FSL_DR_USB 636 637 #ifdef CONFIG_HAS_FSL_DR_USB 638 #define CONFIG_USB_EHCI_FSL 639 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 640 #endif 641 642 /* 643 * SDHC 644 */ 645 #ifdef CONFIG_MMC 646 #define CONFIG_FSL_ESDHC 647 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 648 #endif 649 650 /* Qman/Bman */ 651 #ifndef CONFIG_NOBQFMAN 652 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 653 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 654 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 655 #ifdef CONFIG_PHYS_64BIT 656 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 657 #else 658 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 659 #endif 660 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 661 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 662 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 663 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 664 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 665 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 666 CONFIG_SYS_BMAN_CENA_SIZE) 667 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 668 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 669 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 670 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 671 #ifdef CONFIG_PHYS_64BIT 672 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 673 #else 674 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 675 #endif 676 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 677 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 678 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 679 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 680 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 681 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 682 CONFIG_SYS_QMAN_CENA_SIZE) 683 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 684 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 685 686 #define CONFIG_SYS_DPAA_FMAN 687 688 #ifdef CONFIG_TARGET_T1024RDB 689 #define CONFIG_QE 690 #define CONFIG_U_QE 691 #endif 692 /* Default address of microcode for the Linux FMan driver */ 693 #if defined(CONFIG_SPIFLASH) 694 /* 695 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 696 * env, so we got 0x110000. 697 */ 698 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 699 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 700 #define CONFIG_SYS_QE_FW_ADDR 0x130000 701 #elif defined(CONFIG_SDCARD) 702 /* 703 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 704 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 705 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 706 */ 707 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 708 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 709 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 710 #elif defined(CONFIG_NAND) 711 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 712 #if defined(CONFIG_TARGET_T1024RDB) 713 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 714 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 715 #elif defined(CONFIG_TARGET_T1023RDB) 716 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 717 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 718 #endif 719 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 720 /* 721 * Slave has no ucode locally, it can fetch this from remote. When implementing 722 * in two corenet boards, slave's ucode could be stored in master's memory 723 * space, the address can be mapped from slave TLB->slave LAW-> 724 * slave SRIO or PCIE outbound window->master inbound window-> 725 * master LAW->the ucode address in master's memory space. 726 */ 727 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 728 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 729 #else 730 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 731 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 732 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 733 #endif 734 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 735 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 736 #endif /* CONFIG_NOBQFMAN */ 737 738 #ifdef CONFIG_SYS_DPAA_FMAN 739 #define CONFIG_FMAN_ENET 740 #define CONFIG_PHYLIB_10G 741 #define CONFIG_PHY_REALTEK 742 #define CONFIG_PHY_AQUANTIA 743 #if defined(CONFIG_TARGET_T1024RDB) 744 #define RGMII_PHY1_ADDR 0x2 745 #define RGMII_PHY2_ADDR 0x6 746 #define SGMII_AQR_PHY_ADDR 0x2 747 #define FM1_10GEC1_PHY_ADDR 0x1 748 #elif defined(CONFIG_TARGET_T1023RDB) 749 #define RGMII_PHY1_ADDR 0x1 750 #define SGMII_RTK_PHY_ADDR 0x3 751 #define SGMII_AQR_PHY_ADDR 0x2 752 #endif 753 #endif 754 755 #ifdef CONFIG_FMAN_ENET 756 #define CONFIG_MII /* MII PHY management */ 757 #define CONFIG_ETHPRIME "FM1@DTSEC4" 758 #endif 759 760 /* 761 * Dynamic MTD Partition support with mtdparts 762 */ 763 #ifdef CONFIG_MTD_NOR_FLASH 764 #define CONFIG_MTD_DEVICE 765 #define CONFIG_MTD_PARTITIONS 766 #define CONFIG_FLASH_CFI_MTD 767 #endif 768 769 /* 770 * Environment 771 */ 772 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 773 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 774 775 /* 776 * Miscellaneous configurable options 777 */ 778 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 779 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 780 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 781 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 782 783 /* 784 * For booting Linux, the board info and command line data 785 * have to be in the first 64 MB of memory, since this is 786 * the maximum mapped by the Linux kernel during initialization. 787 */ 788 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 789 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 790 791 #ifdef CONFIG_CMD_KGDB 792 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 793 #endif 794 795 /* 796 * Environment Configuration 797 */ 798 #define CONFIG_ROOTPATH "/opt/nfsroot" 799 #define CONFIG_BOOTFILE "uImage" 800 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 801 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 802 #define __USB_PHY_TYPE utmi 803 804 #ifdef CONFIG_ARCH_T1024 805 #define CONFIG_BOARDNAME t1024rdb 806 #define BANK_INTLV cs0_cs1 807 #else 808 #define CONFIG_BOARDNAME t1023rdb 809 #define BANK_INTLV null 810 #endif 811 812 #define CONFIG_EXTRA_ENV_SETTINGS \ 813 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 814 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 815 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 816 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 817 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 818 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 819 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 820 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 821 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 822 "netdev=eth0\0" \ 823 "tftpflash=tftpboot $loadaddr $uboot && " \ 824 "protect off $ubootaddr +$filesize && " \ 825 "erase $ubootaddr +$filesize && " \ 826 "cp.b $loadaddr $ubootaddr $filesize && " \ 827 "protect on $ubootaddr +$filesize && " \ 828 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 829 "consoledev=ttyS0\0" \ 830 "ramdiskaddr=2000000\0" \ 831 "fdtaddr=1e00000\0" \ 832 "bdev=sda3\0" 833 834 #define CONFIG_LINUX \ 835 "setenv bootargs root=/dev/ram rw " \ 836 "console=$consoledev,$baudrate $othbootargs;" \ 837 "setenv ramdiskaddr 0x02000000;" \ 838 "setenv fdtaddr 0x00c00000;" \ 839 "setenv loadaddr 0x1000000;" \ 840 "bootm $loadaddr $ramdiskaddr $fdtaddr" 841 842 #define CONFIG_NFSBOOTCOMMAND \ 843 "setenv bootargs root=/dev/nfs rw " \ 844 "nfsroot=$serverip:$rootpath " \ 845 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 846 "console=$consoledev,$baudrate $othbootargs;" \ 847 "tftp $loadaddr $bootfile;" \ 848 "tftp $fdtaddr $fdtfile;" \ 849 "bootm $loadaddr - $fdtaddr" 850 851 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 852 853 #include <asm/fsl_secure_boot.h> 854 855 #endif /* __T1024RDB_H */ 856