1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 RDB board configuration file 9 */ 10 11 #ifndef __T1024RDB_H 12 #define __T1024RDB_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_DISPLAY_BOARDINFO 16 #define CONFIG_BOOKE 17 #define CONFIG_E500 /* BOOKE e500 family */ 18 #define CONFIG_E500MC /* BOOKE e500mc family */ 19 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 20 #define CONFIG_MP /* support multiple processors */ 21 #define CONFIG_PHYS_64BIT 22 #define CONFIG_ENABLE_36BIT_PHYS 23 24 #ifdef CONFIG_PHYS_64BIT 25 #define CONFIG_ADDR_MAP 1 26 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 27 #endif 28 29 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 30 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 31 #define CONFIG_FSL_IFC /* Enable IFC Support */ 32 33 #define CONFIG_FSL_LAW /* Use common FSL init code */ 34 #define CONFIG_ENV_OVERWRITE 35 36 /* support deep sleep */ 37 #ifdef CONFIG_PPC_T1024 38 #define CONFIG_DEEP_SLEEP 39 #endif 40 #if defined(CONFIG_DEEP_SLEEP) 41 #define CONFIG_SILENT_CONSOLE 42 #define CONFIG_BOARD_EARLY_INIT_F 43 #endif 44 45 #ifdef CONFIG_RAMBOOT_PBL 46 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 47 #if defined(CONFIG_T1024RDB) 48 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg 49 #elif defined(CONFIG_T1023RDB) 50 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg 51 #endif 52 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 53 #define CONFIG_SPL_ENV_SUPPORT 54 #define CONFIG_SPL_SERIAL_SUPPORT 55 #define CONFIG_SPL_FLUSH_IMAGE 56 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 57 #define CONFIG_SPL_LIBGENERIC_SUPPORT 58 #define CONFIG_SPL_LIBCOMMON_SUPPORT 59 #define CONFIG_SPL_I2C_SUPPORT 60 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 61 #define CONFIG_FSL_LAW /* Use common FSL init code */ 62 #define CONFIG_SYS_TEXT_BASE 0x30001000 63 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 64 #define CONFIG_SPL_PAD_TO 0x40000 65 #define CONFIG_SPL_MAX_SIZE 0x28000 66 #define RESET_VECTOR_OFFSET 0x27FFC 67 #define BOOT_PAGE_OFFSET 0x27000 68 #ifdef CONFIG_SPL_BUILD 69 #define CONFIG_SPL_SKIP_RELOCATE 70 #define CONFIG_SPL_COMMON_INIT_DDR 71 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 72 #define CONFIG_SYS_NO_FLASH 73 #endif 74 75 #ifdef CONFIG_NAND 76 #define CONFIG_SPL_NAND_SUPPORT 77 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 78 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 79 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 80 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 81 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 82 #define CONFIG_SPL_NAND_BOOT 83 #endif 84 85 #ifdef CONFIG_SPIFLASH 86 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 87 #define CONFIG_SPL_SPI_SUPPORT 88 #define CONFIG_SPL_SPI_FLASH_SUPPORT 89 #define CONFIG_SPL_SPI_FLASH_MINIMAL 90 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 91 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 92 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 93 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 94 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 95 #ifndef CONFIG_SPL_BUILD 96 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 97 #endif 98 #define CONFIG_SPL_SPI_BOOT 99 #endif 100 101 #ifdef CONFIG_SDCARD 102 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 103 #define CONFIG_SPL_MMC_SUPPORT 104 #define CONFIG_SPL_MMC_MINIMAL 105 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 106 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 107 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 108 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 109 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 110 #ifndef CONFIG_SPL_BUILD 111 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 112 #endif 113 #define CONFIG_SPL_MMC_BOOT 114 #endif 115 116 #endif /* CONFIG_RAMBOOT_PBL */ 117 118 #ifndef CONFIG_SYS_TEXT_BASE 119 #define CONFIG_SYS_TEXT_BASE 0xeff40000 120 #endif 121 122 #ifndef CONFIG_RESET_VECTOR_ADDRESS 123 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 124 #endif 125 126 #ifndef CONFIG_SYS_NO_FLASH 127 #define CONFIG_FLASH_CFI_DRIVER 128 #define CONFIG_SYS_FLASH_CFI 129 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 130 #endif 131 132 /* PCIe Boot - Master */ 133 #define CONFIG_SRIO_PCIE_BOOT_MASTER 134 /* 135 * for slave u-boot IMAGE instored in master memory space, 136 * PHYS must be aligned based on the SIZE 137 */ 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 140 #ifdef CONFIG_PHYS_64BIT 141 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 142 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 143 #else 144 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 145 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 146 #endif 147 /* 148 * for slave UCODE and ENV instored in master memory space, 149 * PHYS must be aligned based on the SIZE 150 */ 151 #ifdef CONFIG_PHYS_64BIT 152 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 153 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 154 #else 155 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 156 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 157 #endif 158 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 159 /* slave core release by master*/ 160 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 161 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 162 163 /* PCIe Boot - Slave */ 164 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 165 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 166 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 167 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 168 /* Set 1M boot space for PCIe boot */ 169 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 170 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 171 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 172 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 173 #define CONFIG_SYS_NO_FLASH 174 #endif 175 176 #if defined(CONFIG_SPIFLASH) 177 #define CONFIG_SYS_EXTRA_ENV_RELOC 178 #define CONFIG_ENV_IS_IN_SPI_FLASH 179 #define CONFIG_ENV_SPI_BUS 0 180 #define CONFIG_ENV_SPI_CS 0 181 #define CONFIG_ENV_SPI_MAX_HZ 10000000 182 #define CONFIG_ENV_SPI_MODE 0 183 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 184 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 185 #if defined(CONFIG_T1024RDB) 186 #define CONFIG_ENV_SECT_SIZE 0x10000 187 #elif defined(CONFIG_T1023RDB) 188 #define CONFIG_ENV_SECT_SIZE 0x40000 189 #endif 190 #elif defined(CONFIG_SDCARD) 191 #define CONFIG_SYS_EXTRA_ENV_RELOC 192 #define CONFIG_ENV_IS_IN_MMC 193 #define CONFIG_SYS_MMC_ENV_DEV 0 194 #define CONFIG_ENV_SIZE 0x2000 195 #define CONFIG_ENV_OFFSET (512 * 0x800) 196 #elif defined(CONFIG_NAND) 197 #define CONFIG_SYS_EXTRA_ENV_RELOC 198 #define CONFIG_ENV_IS_IN_NAND 199 #define CONFIG_ENV_SIZE 0x2000 200 #if defined(CONFIG_T1024RDB) 201 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 202 #elif defined(CONFIG_T1023RDB) 203 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 204 #endif 205 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 206 #define CONFIG_ENV_IS_IN_REMOTE 207 #define CONFIG_ENV_ADDR 0xffe20000 208 #define CONFIG_ENV_SIZE 0x2000 209 #elif defined(CONFIG_ENV_IS_NOWHERE) 210 #define CONFIG_ENV_SIZE 0x2000 211 #else 212 #define CONFIG_ENV_IS_IN_FLASH 213 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 214 #define CONFIG_ENV_SIZE 0x2000 215 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 216 #endif 217 218 219 #ifndef __ASSEMBLY__ 220 unsigned long get_board_sys_clk(void); 221 unsigned long get_board_ddr_clk(void); 222 #endif 223 224 #define CONFIG_SYS_CLK_FREQ 100000000 225 #define CONFIG_DDR_CLK_FREQ 100000000 226 227 /* 228 * These can be toggled for performance analysis, otherwise use default. 229 */ 230 #define CONFIG_SYS_CACHE_STASHING 231 #define CONFIG_BACKSIDE_L2_CACHE 232 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 233 #define CONFIG_BTB /* toggle branch predition */ 234 #define CONFIG_DDR_ECC 235 #ifdef CONFIG_DDR_ECC 236 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 237 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 238 #endif 239 240 #define CONFIG_CMD_MEMTEST 241 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 242 #define CONFIG_SYS_MEMTEST_END 0x00400000 243 #define CONFIG_SYS_ALT_MEMTEST 244 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 245 246 /* 247 * Config the L3 Cache as L3 SRAM 248 */ 249 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 250 #define CONFIG_SYS_L3_SIZE (256 << 10) 251 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 252 #ifdef CONFIG_RAMBOOT_PBL 253 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 254 #endif 255 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 256 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 257 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 258 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 259 260 #ifdef CONFIG_PHYS_64BIT 261 #define CONFIG_SYS_DCSRBAR 0xf0000000 262 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 263 #endif 264 265 /* EEPROM */ 266 #define CONFIG_ID_EEPROM 267 #define CONFIG_SYS_I2C_EEPROM_NXID 268 #define CONFIG_SYS_EEPROM_BUS_NUM 0 269 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 270 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 271 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 272 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 273 274 /* 275 * DDR Setup 276 */ 277 #define CONFIG_VERY_BIG_RAM 278 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 279 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 280 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 281 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 282 #define CONFIG_FSL_DDR_INTERACTIVE 283 #if defined(CONFIG_T1024RDB) 284 #define CONFIG_DDR_SPD 285 #define CONFIG_SYS_FSL_DDR3 286 #define CONFIG_SYS_SPD_BUS_NUM 0 287 #define SPD_EEPROM_ADDRESS 0x51 288 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 289 #elif defined(CONFIG_T1023RDB) 290 #define CONFIG_SYS_FSL_DDR4 291 #define CONFIG_SYS_DDR_RAW_TIMING 292 #define CONFIG_SYS_SDRAM_SIZE 2048 293 #endif 294 295 /* 296 * IFC Definitions 297 */ 298 #define CONFIG_SYS_FLASH_BASE 0xe8000000 299 #ifdef CONFIG_PHYS_64BIT 300 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 301 #else 302 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 303 #endif 304 305 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 306 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 307 CSPR_PORT_SIZE_16 | \ 308 CSPR_MSEL_NOR | \ 309 CSPR_V) 310 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 311 312 /* NOR Flash Timing Params */ 313 #if defined(CONFIG_T1024RDB) 314 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 315 #elif defined(CONFIG_T1023RDB) 316 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ 317 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 318 #endif 319 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 320 FTIM0_NOR_TEADC(0x5) | \ 321 FTIM0_NOR_TEAHC(0x5)) 322 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 323 FTIM1_NOR_TRAD_NOR(0x1A) |\ 324 FTIM1_NOR_TSEQRAD_NOR(0x13)) 325 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 326 FTIM2_NOR_TCH(0x4) | \ 327 FTIM2_NOR_TWPH(0x0E) | \ 328 FTIM2_NOR_TWP(0x1c)) 329 #define CONFIG_SYS_NOR_FTIM3 0x0 330 331 #define CONFIG_SYS_FLASH_QUIET_TEST 332 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 333 334 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 335 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 336 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 337 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 338 339 #define CONFIG_SYS_FLASH_EMPTY_INFO 340 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 341 342 #ifdef CONFIG_T1024RDB 343 /* CPLD on IFC */ 344 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 345 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 346 #define CONFIG_SYS_CSPR2_EXT (0xf) 347 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 348 | CSPR_PORT_SIZE_8 \ 349 | CSPR_MSEL_GPCM \ 350 | CSPR_V) 351 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 352 #define CONFIG_SYS_CSOR2 0x0 353 354 /* CPLD Timing parameters for IFC CS2 */ 355 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 356 FTIM0_GPCM_TEADC(0x0e) | \ 357 FTIM0_GPCM_TEAHC(0x0e)) 358 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 359 FTIM1_GPCM_TRAD(0x1f)) 360 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 361 FTIM2_GPCM_TCH(0x8) | \ 362 FTIM2_GPCM_TWP(0x1f)) 363 #define CONFIG_SYS_CS2_FTIM3 0x0 364 #endif 365 366 /* NAND Flash on IFC */ 367 #define CONFIG_NAND_FSL_IFC 368 #define CONFIG_SYS_NAND_BASE 0xff800000 369 #ifdef CONFIG_PHYS_64BIT 370 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 371 #else 372 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 373 #endif 374 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 375 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 376 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 377 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 378 | CSPR_V) 379 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 380 381 #if defined(CONFIG_T1024RDB) 382 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 383 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 384 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 385 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 386 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 387 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 388 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 389 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 390 #elif defined(CONFIG_T1023RDB) 391 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 392 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 393 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 394 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 395 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 396 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 397 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 398 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 399 #endif 400 401 #define CONFIG_SYS_NAND_ONFI_DETECTION 402 /* ONFI NAND Flash mode0 Timing Params */ 403 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 404 FTIM0_NAND_TWP(0x18) | \ 405 FTIM0_NAND_TWCHT(0x07) | \ 406 FTIM0_NAND_TWH(0x0a)) 407 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 408 FTIM1_NAND_TWBE(0x39) | \ 409 FTIM1_NAND_TRR(0x0e) | \ 410 FTIM1_NAND_TRP(0x18)) 411 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 412 FTIM2_NAND_TREH(0x0a) | \ 413 FTIM2_NAND_TWHRE(0x1e)) 414 #define CONFIG_SYS_NAND_FTIM3 0x0 415 416 #define CONFIG_SYS_NAND_DDR_LAW 11 417 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 418 #define CONFIG_SYS_MAX_NAND_DEVICE 1 419 #define CONFIG_CMD_NAND 420 421 #if defined(CONFIG_NAND) 422 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 423 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 424 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 425 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 426 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 427 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 428 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 429 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 430 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 431 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 432 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 433 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 434 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 435 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 436 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 437 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 438 #else 439 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 440 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 441 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 442 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 443 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 444 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 445 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 446 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 447 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 448 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 449 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 450 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 451 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 452 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 453 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 454 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 455 #endif 456 457 #ifdef CONFIG_SPL_BUILD 458 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 459 #else 460 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 461 #endif 462 463 #if defined(CONFIG_RAMBOOT_PBL) 464 #define CONFIG_SYS_RAMBOOT 465 #endif 466 467 #define CONFIG_BOARD_EARLY_INIT_R 468 #define CONFIG_MISC_INIT_R 469 470 #define CONFIG_HWCONFIG 471 472 /* define to use L1 as initial stack */ 473 #define CONFIG_L1_INIT_RAM 474 #define CONFIG_SYS_INIT_RAM_LOCK 475 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 476 #ifdef CONFIG_PHYS_64BIT 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 479 /* The assembler doesn't like typecast */ 480 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 481 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 482 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 483 #else 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 486 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 487 #endif 488 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 489 490 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 491 GENERATED_GBL_DATA_SIZE) 492 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 493 494 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 495 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 496 497 /* Serial Port */ 498 #define CONFIG_CONS_INDEX 1 499 #define CONFIG_SYS_NS16550 500 #define CONFIG_SYS_NS16550_SERIAL 501 #define CONFIG_SYS_NS16550_REG_SIZE 1 502 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 503 504 #define CONFIG_SYS_BAUDRATE_TABLE \ 505 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 506 507 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 508 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 509 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 510 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 511 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 512 513 /* Use the HUSH parser */ 514 #define CONFIG_SYS_HUSH_PARSER 515 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 516 517 /* Video */ 518 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 519 #ifdef CONFIG_FSL_DIU_FB 520 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 521 #define CONFIG_VIDEO 522 #define CONFIG_CMD_BMP 523 #define CONFIG_CFB_CONSOLE 524 #define CONFIG_VIDEO_SW_CURSOR 525 #define CONFIG_VGA_AS_SINGLE_DEVICE 526 #define CONFIG_VIDEO_LOGO 527 #define CONFIG_VIDEO_BMP_LOGO 528 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 529 /* 530 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 531 * disable empty flash sector detection, which is I/O-intensive. 532 */ 533 #undef CONFIG_SYS_FLASH_EMPTY_INFO 534 #endif 535 536 /* pass open firmware flat tree */ 537 #define CONFIG_OF_LIBFDT 538 #define CONFIG_OF_BOARD_SETUP 539 #define CONFIG_OF_STDOUT_VIA_ALIAS 540 541 /* new uImage format support */ 542 #define CONFIG_FIT 543 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 544 545 /* I2C */ 546 #define CONFIG_SYS_I2C 547 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 548 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 549 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 550 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 551 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 552 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 553 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 554 555 #define I2C_PCA6408_BUS_NUM 1 556 #define I2C_PCA6408_ADDR 0x20 557 558 /* I2C bus multiplexer */ 559 #define I2C_MUX_CH_DEFAULT 0x8 560 561 /* 562 * RTC configuration 563 */ 564 #define RTC 565 #define CONFIG_RTC_DS1337 1 566 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 567 568 /* 569 * eSPI - Enhanced SPI 570 */ 571 #define CONFIG_FSL_ESPI 572 #if defined(CONFIG_T1024RDB) 573 #define CONFIG_SPI_FLASH_STMICRO 574 #elif defined(CONFIG_T1023RDB) 575 #define CONFIG_SPI_FLASH_SPANSION 576 #endif 577 #define CONFIG_CMD_SF 578 #define CONFIG_SPI_FLASH_BAR 579 #define CONFIG_SF_DEFAULT_SPEED 10000000 580 #define CONFIG_SF_DEFAULT_MODE 0 581 582 /* 583 * General PCIe 584 * Memory space is mapped 1-1, but I/O space must start from 0. 585 */ 586 #define CONFIG_PCI /* Enable PCI/PCIE */ 587 #define CONFIG_PCIE1 /* PCIE controler 1 */ 588 #define CONFIG_PCIE2 /* PCIE controler 2 */ 589 #define CONFIG_PCIE3 /* PCIE controler 3 */ 590 #ifdef CONFIG_PPC_T1040 591 #define CONFIG_PCIE4 /* PCIE controler 4 */ 592 #endif 593 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 594 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 595 #define CONFIG_PCI_INDIRECT_BRIDGE 596 597 #ifdef CONFIG_PCI 598 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 599 #ifdef CONFIG_PCIE1 600 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 601 #ifdef CONFIG_PHYS_64BIT 602 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 603 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 604 #else 605 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 606 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 607 #endif 608 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 609 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 610 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 611 #ifdef CONFIG_PHYS_64BIT 612 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 613 #else 614 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 615 #endif 616 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 617 #endif 618 619 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 620 #ifdef CONFIG_PCIE2 621 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 622 #ifdef CONFIG_PHYS_64BIT 623 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 624 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 625 #else 626 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 627 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 628 #endif 629 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 630 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 631 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 632 #ifdef CONFIG_PHYS_64BIT 633 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 634 #else 635 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 636 #endif 637 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 638 #endif 639 640 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 641 #ifdef CONFIG_PCIE3 642 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 643 #ifdef CONFIG_PHYS_64BIT 644 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 645 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 646 #else 647 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 648 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 649 #endif 650 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 651 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 652 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 653 #ifdef CONFIG_PHYS_64BIT 654 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 655 #else 656 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 657 #endif 658 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 659 #endif 660 661 /* controller 4, Base address 203000, to be removed */ 662 #ifdef CONFIG_PCIE4 663 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 664 #ifdef CONFIG_PHYS_64BIT 665 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 666 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 667 #else 668 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 669 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 670 #endif 671 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 672 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 673 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 674 #ifdef CONFIG_PHYS_64BIT 675 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 676 #else 677 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 678 #endif 679 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 680 #endif 681 682 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 683 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 684 #define CONFIG_DOS_PARTITION 685 #endif /* CONFIG_PCI */ 686 687 /* 688 * USB 689 */ 690 #define CONFIG_HAS_FSL_DR_USB 691 692 #ifdef CONFIG_HAS_FSL_DR_USB 693 #define CONFIG_USB_EHCI 694 #define CONFIG_CMD_USB 695 #define CONFIG_USB_STORAGE 696 #define CONFIG_USB_EHCI_FSL 697 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 698 #define CONFIG_CMD_EXT2 699 #endif 700 701 /* 702 * SDHC 703 */ 704 #define CONFIG_MMC 705 #ifdef CONFIG_MMC 706 #define CONFIG_FSL_ESDHC 707 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 708 #define CONFIG_CMD_MMC 709 #define CONFIG_GENERIC_MMC 710 #define CONFIG_CMD_EXT2 711 #define CONFIG_CMD_FAT 712 #define CONFIG_DOS_PARTITION 713 #endif 714 715 /* Qman/Bman */ 716 #ifndef CONFIG_NOBQFMAN 717 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 718 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 719 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 720 #ifdef CONFIG_PHYS_64BIT 721 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 722 #else 723 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 724 #endif 725 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 726 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 727 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 728 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 729 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 730 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 731 CONFIG_SYS_BMAN_CENA_SIZE) 732 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 733 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 734 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 735 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 736 #ifdef CONFIG_PHYS_64BIT 737 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 738 #else 739 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 740 #endif 741 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 742 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 743 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 744 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 745 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 746 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 747 CONFIG_SYS_QMAN_CENA_SIZE) 748 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 749 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 750 751 #define CONFIG_SYS_DPAA_FMAN 752 753 #ifdef CONFIG_T1024RDB 754 #define CONFIG_QE 755 #define CONFIG_U_QE 756 #endif 757 /* Default address of microcode for the Linux FMan driver */ 758 #if defined(CONFIG_SPIFLASH) 759 /* 760 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 761 * env, so we got 0x110000. 762 */ 763 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 764 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 765 #define CONFIG_SYS_QE_FW_ADDR 0x130000 766 #elif defined(CONFIG_SDCARD) 767 /* 768 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 769 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 770 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 771 */ 772 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 773 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 774 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 775 #elif defined(CONFIG_NAND) 776 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 777 #if defined(CONFIG_T1024RDB) 778 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 779 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 780 #elif defined(CONFIG_T1023RDB) 781 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 782 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 783 #endif 784 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 785 /* 786 * Slave has no ucode locally, it can fetch this from remote. When implementing 787 * in two corenet boards, slave's ucode could be stored in master's memory 788 * space, the address can be mapped from slave TLB->slave LAW-> 789 * slave SRIO or PCIE outbound window->master inbound window-> 790 * master LAW->the ucode address in master's memory space. 791 */ 792 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 793 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 794 #else 795 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 796 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 797 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 798 #endif 799 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 800 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 801 #endif /* CONFIG_NOBQFMAN */ 802 803 #ifdef CONFIG_SYS_DPAA_FMAN 804 #define CONFIG_FMAN_ENET 805 #define CONFIG_PHYLIB_10G 806 #define CONFIG_PHY_REALTEK 807 #define CONFIG_PHY_AQUANTIA 808 #if defined(CONFIG_T1024RDB) 809 #define RGMII_PHY1_ADDR 0x2 810 #define RGMII_PHY2_ADDR 0x6 811 #define SGMII_AQR_PHY_ADDR 0x2 812 #define FM1_10GEC1_PHY_ADDR 0x1 813 #elif defined(CONFIG_T1023RDB) 814 #define RGMII_PHY1_ADDR 0x1 815 #define SGMII_RTK_PHY_ADDR 0x3 816 #define SGMII_AQR_PHY_ADDR 0x2 817 #endif 818 #endif 819 820 #ifdef CONFIG_FMAN_ENET 821 #define CONFIG_MII /* MII PHY management */ 822 #define CONFIG_ETHPRIME "FM1@DTSEC4" 823 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 824 #endif 825 826 /* 827 * Dynamic MTD Partition support with mtdparts 828 */ 829 #ifndef CONFIG_SYS_NO_FLASH 830 #define CONFIG_MTD_DEVICE 831 #define CONFIG_MTD_PARTITIONS 832 #define CONFIG_CMD_MTDPARTS 833 #define CONFIG_FLASH_CFI_MTD 834 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 835 "spi0=spife110000.1" 836 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 837 "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ 838 "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ 839 "1m(uboot),5m(kernel),128k(dtb),-(user)" 840 #endif 841 842 /* 843 * Environment 844 */ 845 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 846 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 847 848 /* 849 * Command line configuration. 850 */ 851 #define CONFIG_CMD_DATE 852 #define CONFIG_CMD_DHCP 853 #define CONFIG_CMD_EEPROM 854 #define CONFIG_CMD_ERRATA 855 #define CONFIG_CMD_GREPENV 856 #define CONFIG_CMD_IRQ 857 #define CONFIG_CMD_I2C 858 #define CONFIG_CMD_MII 859 #define CONFIG_CMD_PING 860 #define CONFIG_CMD_REGINFO 861 862 #ifdef CONFIG_PCI 863 #define CONFIG_CMD_PCI 864 #endif 865 866 /* 867 * Miscellaneous configurable options 868 */ 869 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 870 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 871 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 872 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 873 #ifdef CONFIG_CMD_KGDB 874 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 875 #else 876 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 877 #endif 878 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 879 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 880 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 881 882 /* 883 * For booting Linux, the board info and command line data 884 * have to be in the first 64 MB of memory, since this is 885 * the maximum mapped by the Linux kernel during initialization. 886 */ 887 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 888 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 889 890 #ifdef CONFIG_CMD_KGDB 891 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 892 #endif 893 894 /* 895 * Environment Configuration 896 */ 897 #define CONFIG_ROOTPATH "/opt/nfsroot" 898 #define CONFIG_BOOTFILE "uImage" 899 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 900 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 901 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 902 #define CONFIG_BAUDRATE 115200 903 #define __USB_PHY_TYPE utmi 904 905 #ifdef CONFIG_PPC_T1024 906 #define CONFIG_BOARDNAME t1024rdb 907 #define BANK_INTLV cs0_cs1 908 #else 909 #define CONFIG_BOARDNAME t1023rdb 910 #define BANK_INTLV null 911 #endif 912 913 #define CONFIG_EXTRA_ENV_SETTINGS \ 914 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 915 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 916 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 917 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 918 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 919 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 920 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 921 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 922 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 923 "netdev=eth0\0" \ 924 "tftpflash=tftpboot $loadaddr $uboot && " \ 925 "protect off $ubootaddr +$filesize && " \ 926 "erase $ubootaddr +$filesize && " \ 927 "cp.b $loadaddr $ubootaddr $filesize && " \ 928 "protect on $ubootaddr +$filesize && " \ 929 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 930 "consoledev=ttyS0\0" \ 931 "ramdiskaddr=2000000\0" \ 932 "fdtaddr=c00000\0" \ 933 "bdev=sda3\0" 934 935 #define CONFIG_LINUX \ 936 "setenv bootargs root=/dev/ram rw " \ 937 "console=$consoledev,$baudrate $othbootargs;" \ 938 "setenv ramdiskaddr 0x02000000;" \ 939 "setenv fdtaddr 0x00c00000;" \ 940 "setenv loadaddr 0x1000000;" \ 941 "bootm $loadaddr $ramdiskaddr $fdtaddr" 942 943 944 #define CONFIG_NFSBOOTCOMMAND \ 945 "setenv bootargs root=/dev/nfs rw " \ 946 "nfsroot=$serverip:$rootpath " \ 947 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 948 "console=$consoledev,$baudrate $othbootargs;" \ 949 "tftp $loadaddr $bootfile;" \ 950 "tftp $fdtaddr $fdtfile;" \ 951 "bootm $loadaddr - $fdtaddr" 952 953 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 954 955 #ifdef CONFIG_SECURE_BOOT 956 #include <asm/fsl_secure_boot.h> 957 #endif 958 959 #endif /* __T1024RDB_H */ 960