1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 RDB board configuration file 9 */ 10 11 #ifndef __T1024RDB_H 12 #define __T1024RDB_H 13 14 #if defined(CONFIG_T1023RDB) 15 #ifdef CONFIG_SPL 16 #define CONFIG_SYS_NO_FLASH 17 #endif 18 #endif 19 20 /* High Level Configuration Options */ 21 #define CONFIG_SYS_GENERIC_BOARD 22 #define CONFIG_DISPLAY_BOARDINFO 23 #define CONFIG_BOOKE 24 #define CONFIG_E500 /* BOOKE e500 family */ 25 #define CONFIG_E500MC /* BOOKE e500mc family */ 26 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 27 #define CONFIG_MP /* support multiple processors */ 28 #define CONFIG_PHYS_64BIT 29 #define CONFIG_ENABLE_36BIT_PHYS 30 31 #ifdef CONFIG_PHYS_64BIT 32 #define CONFIG_ADDR_MAP 1 33 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 34 #endif 35 36 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 37 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 38 #define CONFIG_FSL_IFC /* Enable IFC Support */ 39 40 #define CONFIG_FSL_LAW /* Use common FSL init code */ 41 #define CONFIG_ENV_OVERWRITE 42 43 /* support deep sleep */ 44 #ifdef CONFIG_PPC_T1024 45 #define CONFIG_DEEP_SLEEP 46 #endif 47 #if defined(CONFIG_DEEP_SLEEP) 48 #define CONFIG_SILENT_CONSOLE 49 #define CONFIG_BOARD_EARLY_INIT_F 50 #endif 51 52 #ifdef CONFIG_RAMBOOT_PBL 53 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 54 #if defined(CONFIG_T1024RDB) 55 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg 56 #elif defined(CONFIG_T1023RDB) 57 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg 58 #endif 59 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 60 #define CONFIG_SPL_ENV_SUPPORT 61 #define CONFIG_SPL_SERIAL_SUPPORT 62 #define CONFIG_SPL_FLUSH_IMAGE 63 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 64 #define CONFIG_SPL_LIBGENERIC_SUPPORT 65 #define CONFIG_SPL_LIBCOMMON_SUPPORT 66 #define CONFIG_SPL_I2C_SUPPORT 67 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 68 #define CONFIG_FSL_LAW /* Use common FSL init code */ 69 #define CONFIG_SYS_TEXT_BASE 0x30001000 70 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 71 #define CONFIG_SPL_PAD_TO 0x40000 72 #define CONFIG_SPL_MAX_SIZE 0x28000 73 #define RESET_VECTOR_OFFSET 0x27FFC 74 #define BOOT_PAGE_OFFSET 0x27000 75 #ifdef CONFIG_SPL_BUILD 76 #define CONFIG_SPL_SKIP_RELOCATE 77 #define CONFIG_SPL_COMMON_INIT_DDR 78 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 79 #define CONFIG_SYS_NO_FLASH 80 #endif 81 82 #ifdef CONFIG_NAND 83 #define CONFIG_SPL_NAND_SUPPORT 84 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 85 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 86 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 87 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 88 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 89 #define CONFIG_SPL_NAND_BOOT 90 #endif 91 92 #ifdef CONFIG_SPIFLASH 93 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 94 #define CONFIG_SPL_SPI_SUPPORT 95 #define CONFIG_SPL_SPI_FLASH_SUPPORT 96 #define CONFIG_SPL_SPI_FLASH_MINIMAL 97 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 98 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 99 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 100 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 101 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 102 #ifndef CONFIG_SPL_BUILD 103 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 104 #endif 105 #define CONFIG_SPL_SPI_BOOT 106 #endif 107 108 #ifdef CONFIG_SDCARD 109 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 110 #define CONFIG_SPL_MMC_SUPPORT 111 #define CONFIG_SPL_MMC_MINIMAL 112 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 113 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 114 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 115 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 116 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 117 #ifndef CONFIG_SPL_BUILD 118 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 119 #endif 120 #define CONFIG_SPL_MMC_BOOT 121 #endif 122 123 #endif /* CONFIG_RAMBOOT_PBL */ 124 125 #ifndef CONFIG_SYS_TEXT_BASE 126 #define CONFIG_SYS_TEXT_BASE 0xeff40000 127 #endif 128 129 #ifndef CONFIG_RESET_VECTOR_ADDRESS 130 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 131 #endif 132 133 #ifndef CONFIG_SYS_NO_FLASH 134 #define CONFIG_FLASH_CFI_DRIVER 135 #define CONFIG_SYS_FLASH_CFI 136 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 137 #endif 138 139 /* PCIe Boot - Master */ 140 #define CONFIG_SRIO_PCIE_BOOT_MASTER 141 /* 142 * for slave u-boot IMAGE instored in master memory space, 143 * PHYS must be aligned based on the SIZE 144 */ 145 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 146 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 147 #ifdef CONFIG_PHYS_64BIT 148 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 149 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 150 #else 151 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 152 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 153 #endif 154 /* 155 * for slave UCODE and ENV instored in master memory space, 156 * PHYS must be aligned based on the SIZE 157 */ 158 #ifdef CONFIG_PHYS_64BIT 159 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 160 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 161 #else 162 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 163 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 164 #endif 165 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 166 /* slave core release by master*/ 167 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 168 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 169 170 /* PCIe Boot - Slave */ 171 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 172 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 173 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 174 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 175 /* Set 1M boot space for PCIe boot */ 176 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 177 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 178 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 179 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 180 #define CONFIG_SYS_NO_FLASH 181 #endif 182 183 #if defined(CONFIG_SPIFLASH) 184 #define CONFIG_SYS_EXTRA_ENV_RELOC 185 #define CONFIG_ENV_IS_IN_SPI_FLASH 186 #define CONFIG_ENV_SPI_BUS 0 187 #define CONFIG_ENV_SPI_CS 0 188 #define CONFIG_ENV_SPI_MAX_HZ 10000000 189 #define CONFIG_ENV_SPI_MODE 0 190 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 191 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 192 #if defined(CONFIG_T1024RDB) 193 #define CONFIG_ENV_SECT_SIZE 0x10000 194 #elif defined(CONFIG_T1023RDB) 195 #define CONFIG_ENV_SECT_SIZE 0x40000 196 #endif 197 #elif defined(CONFIG_SDCARD) 198 #define CONFIG_SYS_EXTRA_ENV_RELOC 199 #define CONFIG_ENV_IS_IN_MMC 200 #define CONFIG_SYS_MMC_ENV_DEV 0 201 #define CONFIG_ENV_SIZE 0x2000 202 #define CONFIG_ENV_OFFSET (512 * 0x800) 203 #elif defined(CONFIG_NAND) 204 #define CONFIG_SYS_EXTRA_ENV_RELOC 205 #define CONFIG_ENV_IS_IN_NAND 206 #define CONFIG_ENV_SIZE 0x2000 207 #if defined(CONFIG_T1024RDB) 208 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 209 #elif defined(CONFIG_T1023RDB) 210 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 211 #endif 212 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 213 #define CONFIG_ENV_IS_IN_REMOTE 214 #define CONFIG_ENV_ADDR 0xffe20000 215 #define CONFIG_ENV_SIZE 0x2000 216 #elif defined(CONFIG_ENV_IS_NOWHERE) 217 #define CONFIG_ENV_SIZE 0x2000 218 #else 219 #define CONFIG_ENV_IS_IN_FLASH 220 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 221 #define CONFIG_ENV_SIZE 0x2000 222 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 223 #endif 224 225 226 #ifndef __ASSEMBLY__ 227 unsigned long get_board_sys_clk(void); 228 unsigned long get_board_ddr_clk(void); 229 #endif 230 231 #define CONFIG_SYS_CLK_FREQ 100000000 232 #define CONFIG_DDR_CLK_FREQ 100000000 233 234 /* 235 * These can be toggled for performance analysis, otherwise use default. 236 */ 237 #define CONFIG_SYS_CACHE_STASHING 238 #define CONFIG_BACKSIDE_L2_CACHE 239 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 240 #define CONFIG_BTB /* toggle branch predition */ 241 #define CONFIG_DDR_ECC 242 #ifdef CONFIG_DDR_ECC 243 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 244 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 245 #endif 246 247 #define CONFIG_CMD_MEMTEST 248 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 249 #define CONFIG_SYS_MEMTEST_END 0x00400000 250 #define CONFIG_SYS_ALT_MEMTEST 251 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 252 253 /* 254 * Config the L3 Cache as L3 SRAM 255 */ 256 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 257 #define CONFIG_SYS_L3_SIZE (256 << 10) 258 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 259 #ifdef CONFIG_RAMBOOT_PBL 260 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 261 #endif 262 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 263 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 264 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 265 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 266 267 #ifdef CONFIG_PHYS_64BIT 268 #define CONFIG_SYS_DCSRBAR 0xf0000000 269 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 270 #endif 271 272 /* EEPROM */ 273 #define CONFIG_ID_EEPROM 274 #define CONFIG_SYS_I2C_EEPROM_NXID 275 #define CONFIG_SYS_EEPROM_BUS_NUM 0 276 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 277 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 278 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 279 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 280 281 /* 282 * DDR Setup 283 */ 284 #define CONFIG_VERY_BIG_RAM 285 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 286 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 287 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 288 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 289 #define CONFIG_FSL_DDR_INTERACTIVE 290 #if defined(CONFIG_T1024RDB) 291 #define CONFIG_DDR_SPD 292 #define CONFIG_SYS_FSL_DDR3 293 #define CONFIG_SYS_SPD_BUS_NUM 0 294 #define SPD_EEPROM_ADDRESS 0x51 295 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 296 #elif defined(CONFIG_T1023RDB) 297 #define CONFIG_SYS_FSL_DDR4 298 #define CONFIG_SYS_DDR_RAW_TIMING 299 #define CONFIG_SYS_SDRAM_SIZE 2048 300 #endif 301 302 /* 303 * IFC Definitions 304 */ 305 #define CONFIG_SYS_FLASH_BASE 0xe8000000 306 #ifdef CONFIG_PHYS_64BIT 307 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 308 #else 309 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 310 #endif 311 312 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 313 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 314 CSPR_PORT_SIZE_16 | \ 315 CSPR_MSEL_NOR | \ 316 CSPR_V) 317 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 318 319 /* NOR Flash Timing Params */ 320 #if defined(CONFIG_T1024RDB) 321 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 322 #elif defined(CONFIG_T1023RDB) 323 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ 324 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 325 #endif 326 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 327 FTIM0_NOR_TEADC(0x5) | \ 328 FTIM0_NOR_TEAHC(0x5)) 329 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 330 FTIM1_NOR_TRAD_NOR(0x1A) |\ 331 FTIM1_NOR_TSEQRAD_NOR(0x13)) 332 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 333 FTIM2_NOR_TCH(0x4) | \ 334 FTIM2_NOR_TWPH(0x0E) | \ 335 FTIM2_NOR_TWP(0x1c)) 336 #define CONFIG_SYS_NOR_FTIM3 0x0 337 338 #define CONFIG_SYS_FLASH_QUIET_TEST 339 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 340 341 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 342 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 343 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 344 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 345 346 #define CONFIG_SYS_FLASH_EMPTY_INFO 347 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 348 349 #ifdef CONFIG_T1024RDB 350 /* CPLD on IFC */ 351 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 352 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 353 #define CONFIG_SYS_CSPR2_EXT (0xf) 354 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 355 | CSPR_PORT_SIZE_8 \ 356 | CSPR_MSEL_GPCM \ 357 | CSPR_V) 358 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 359 #define CONFIG_SYS_CSOR2 0x0 360 361 /* CPLD Timing parameters for IFC CS2 */ 362 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 363 FTIM0_GPCM_TEADC(0x0e) | \ 364 FTIM0_GPCM_TEAHC(0x0e)) 365 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 366 FTIM1_GPCM_TRAD(0x1f)) 367 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 368 FTIM2_GPCM_TCH(0x8) | \ 369 FTIM2_GPCM_TWP(0x1f)) 370 #define CONFIG_SYS_CS2_FTIM3 0x0 371 #endif 372 373 /* NAND Flash on IFC */ 374 #define CONFIG_NAND_FSL_IFC 375 #define CONFIG_SYS_NAND_BASE 0xff800000 376 #ifdef CONFIG_PHYS_64BIT 377 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 378 #else 379 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 380 #endif 381 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 382 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 383 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 384 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 385 | CSPR_V) 386 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 387 388 #if defined(CONFIG_T1024RDB) 389 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 390 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 391 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 392 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 393 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 394 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 395 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 396 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 397 #elif defined(CONFIG_T1023RDB) 398 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 399 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 400 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 401 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 402 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 403 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 404 #endif 405 406 #define CONFIG_SYS_NAND_ONFI_DETECTION 407 /* ONFI NAND Flash mode0 Timing Params */ 408 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 409 FTIM0_NAND_TWP(0x18) | \ 410 FTIM0_NAND_TWCHT(0x07) | \ 411 FTIM0_NAND_TWH(0x0a)) 412 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 413 FTIM1_NAND_TWBE(0x39) | \ 414 FTIM1_NAND_TRR(0x0e) | \ 415 FTIM1_NAND_TRP(0x18)) 416 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 417 FTIM2_NAND_TREH(0x0a) | \ 418 FTIM2_NAND_TWHRE(0x1e)) 419 #define CONFIG_SYS_NAND_FTIM3 0x0 420 421 #define CONFIG_SYS_NAND_DDR_LAW 11 422 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 423 #define CONFIG_SYS_MAX_NAND_DEVICE 1 424 #define CONFIG_CMD_NAND 425 426 #if defined(CONFIG_NAND) 427 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 428 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 429 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 430 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 431 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 432 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 433 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 434 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 435 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 436 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 437 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 438 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 439 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 440 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 441 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 442 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 443 #else 444 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 445 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 446 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 447 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 448 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 449 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 450 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 451 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 452 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 453 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 454 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 455 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 456 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 457 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 458 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 459 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 460 #endif 461 462 #ifdef CONFIG_SPL_BUILD 463 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 464 #else 465 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 466 #endif 467 468 #if defined(CONFIG_RAMBOOT_PBL) 469 #define CONFIG_SYS_RAMBOOT 470 #endif 471 472 #define CONFIG_BOARD_EARLY_INIT_R 473 #define CONFIG_MISC_INIT_R 474 475 #define CONFIG_HWCONFIG 476 477 /* define to use L1 as initial stack */ 478 #define CONFIG_L1_INIT_RAM 479 #define CONFIG_SYS_INIT_RAM_LOCK 480 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 481 #ifdef CONFIG_PHYS_64BIT 482 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 484 /* The assembler doesn't like typecast */ 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 486 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 487 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 488 #else 489 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ 490 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 491 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 492 #endif 493 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 494 495 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 496 GENERATED_GBL_DATA_SIZE) 497 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 498 499 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 500 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 501 502 /* Serial Port */ 503 #define CONFIG_CONS_INDEX 1 504 #define CONFIG_SYS_NS16550 505 #define CONFIG_SYS_NS16550_SERIAL 506 #define CONFIG_SYS_NS16550_REG_SIZE 1 507 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 508 509 #define CONFIG_SYS_BAUDRATE_TABLE \ 510 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 511 512 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 513 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 514 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 515 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 516 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 517 518 /* Use the HUSH parser */ 519 #define CONFIG_SYS_HUSH_PARSER 520 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 521 522 /* Video */ 523 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 524 #ifdef CONFIG_FSL_DIU_FB 525 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 526 #define CONFIG_VIDEO 527 #define CONFIG_CMD_BMP 528 #define CONFIG_CFB_CONSOLE 529 #define CONFIG_VIDEO_SW_CURSOR 530 #define CONFIG_VGA_AS_SINGLE_DEVICE 531 #define CONFIG_VIDEO_LOGO 532 #define CONFIG_VIDEO_BMP_LOGO 533 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 534 /* 535 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 536 * disable empty flash sector detection, which is I/O-intensive. 537 */ 538 #undef CONFIG_SYS_FLASH_EMPTY_INFO 539 #endif 540 541 /* pass open firmware flat tree */ 542 #define CONFIG_OF_LIBFDT 543 #define CONFIG_OF_BOARD_SETUP 544 #define CONFIG_OF_STDOUT_VIA_ALIAS 545 546 /* new uImage format support */ 547 #define CONFIG_FIT 548 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 549 550 /* I2C */ 551 #define CONFIG_SYS_I2C 552 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 553 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 554 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 555 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 556 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 557 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 558 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 559 560 #define I2C_MUX_PCA_ADDR 0x77 561 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 562 563 564 /* I2C bus multiplexer */ 565 #define I2C_MUX_CH_DEFAULT 0x8 566 567 /* 568 * RTC configuration 569 */ 570 #define RTC 571 #define CONFIG_RTC_DS1337 1 572 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 573 574 /* 575 * eSPI - Enhanced SPI 576 */ 577 #define CONFIG_FSL_ESPI 578 #define CONFIG_SPI_FLASH 579 #if defined(CONFIG_T1024RDB) 580 #define CONFIG_SPI_FLASH_STMICRO 581 #elif defined(CONFIG_T1023RDB) 582 #define CONFIG_SPI_FLASH_SPANSION 583 #endif 584 #define CONFIG_CMD_SF 585 #define CONFIG_SPI_FLASH_BAR 586 #define CONFIG_SF_DEFAULT_SPEED 10000000 587 #define CONFIG_SF_DEFAULT_MODE 0 588 589 /* 590 * General PCIe 591 * Memory space is mapped 1-1, but I/O space must start from 0. 592 */ 593 #define CONFIG_PCI /* Enable PCI/PCIE */ 594 #define CONFIG_PCIE1 /* PCIE controler 1 */ 595 #define CONFIG_PCIE2 /* PCIE controler 2 */ 596 #define CONFIG_PCIE3 /* PCIE controler 3 */ 597 #ifdef CONFIG_PPC_T1040 598 #define CONFIG_PCIE4 /* PCIE controler 4 */ 599 #endif 600 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 601 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 602 #define CONFIG_PCI_INDIRECT_BRIDGE 603 604 #ifdef CONFIG_PCI 605 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 606 #ifdef CONFIG_PCIE1 607 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 608 #ifdef CONFIG_PHYS_64BIT 609 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 610 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 611 #else 612 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 613 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 614 #endif 615 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 616 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 617 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 618 #ifdef CONFIG_PHYS_64BIT 619 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 620 #else 621 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 622 #endif 623 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 624 #endif 625 626 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 627 #ifdef CONFIG_PCIE2 628 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 629 #ifdef CONFIG_PHYS_64BIT 630 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 631 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 632 #else 633 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 634 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 635 #endif 636 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 637 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 638 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 639 #ifdef CONFIG_PHYS_64BIT 640 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 641 #else 642 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 643 #endif 644 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 645 #endif 646 647 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 648 #ifdef CONFIG_PCIE3 649 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 650 #ifdef CONFIG_PHYS_64BIT 651 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 652 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 653 #else 654 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 655 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 656 #endif 657 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 658 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 659 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 660 #ifdef CONFIG_PHYS_64BIT 661 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 662 #else 663 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 664 #endif 665 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 666 #endif 667 668 /* controller 4, Base address 203000, to be removed */ 669 #ifdef CONFIG_PCIE4 670 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 671 #ifdef CONFIG_PHYS_64BIT 672 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 673 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 674 #else 675 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 676 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 677 #endif 678 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 679 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 680 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 681 #ifdef CONFIG_PHYS_64BIT 682 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 683 #else 684 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 685 #endif 686 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 687 #endif 688 689 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 690 #define CONFIG_E1000 691 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 692 #define CONFIG_DOS_PARTITION 693 #endif /* CONFIG_PCI */ 694 695 /* 696 * USB 697 */ 698 #define CONFIG_HAS_FSL_DR_USB 699 700 #ifdef CONFIG_HAS_FSL_DR_USB 701 #define CONFIG_USB_EHCI 702 #define CONFIG_CMD_USB 703 #define CONFIG_USB_STORAGE 704 #define CONFIG_USB_EHCI_FSL 705 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 706 #define CONFIG_CMD_EXT2 707 #endif 708 709 /* 710 * SDHC 711 */ 712 #define CONFIG_MMC 713 #ifdef CONFIG_MMC 714 #define CONFIG_FSL_ESDHC 715 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 716 #define CONFIG_CMD_MMC 717 #define CONFIG_GENERIC_MMC 718 #define CONFIG_CMD_EXT2 719 #define CONFIG_CMD_FAT 720 #define CONFIG_DOS_PARTITION 721 #endif 722 723 /* Qman/Bman */ 724 #ifndef CONFIG_NOBQFMAN 725 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 726 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 727 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 728 #ifdef CONFIG_PHYS_64BIT 729 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 730 #else 731 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 732 #endif 733 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 734 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 735 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 736 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 737 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 738 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 739 CONFIG_SYS_BMAN_CENA_SIZE) 740 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 741 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 742 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 743 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 744 #ifdef CONFIG_PHYS_64BIT 745 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 746 #else 747 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 748 #endif 749 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 750 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 751 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 752 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 753 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 754 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 755 CONFIG_SYS_QMAN_CENA_SIZE) 756 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 757 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 758 759 #define CONFIG_SYS_DPAA_FMAN 760 761 #define CONFIG_QE 762 #define CONFIG_U_QE 763 /* Default address of microcode for the Linux FMan driver */ 764 #if defined(CONFIG_SPIFLASH) 765 /* 766 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 767 * env, so we got 0x110000. 768 */ 769 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 770 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 771 #define CONFIG_SYS_QE_FW_ADDR 0x130000 772 #elif defined(CONFIG_SDCARD) 773 /* 774 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 775 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 776 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 777 */ 778 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 779 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 780 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 781 #elif defined(CONFIG_NAND) 782 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 783 #if defined(CONFIG_T1024RDB) 784 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 785 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 786 #elif defined(CONFIG_T1023RDB) 787 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 788 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 789 #endif 790 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 791 /* 792 * Slave has no ucode locally, it can fetch this from remote. When implementing 793 * in two corenet boards, slave's ucode could be stored in master's memory 794 * space, the address can be mapped from slave TLB->slave LAW-> 795 * slave SRIO or PCIE outbound window->master inbound window-> 796 * master LAW->the ucode address in master's memory space. 797 */ 798 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 799 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 800 #else 801 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 802 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 803 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 804 #endif 805 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 806 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 807 #endif /* CONFIG_NOBQFMAN */ 808 809 #ifdef CONFIG_SYS_DPAA_FMAN 810 #define CONFIG_FMAN_ENET 811 #define CONFIG_PHYLIB_10G 812 #define CONFIG_PHY_REALTEK 813 #define CONFIG_PHY_AQUANTIA 814 #if defined(CONFIG_T1024RDB) 815 #define RGMII_PHY1_ADDR 0x2 816 #define RGMII_PHY2_ADDR 0x6 817 #define SGMII_AQR_PHY_ADDR 0x2 818 #define FM1_10GEC1_PHY_ADDR 0x1 819 #elif defined(CONFIG_T1023RDB) 820 #define RGMII_PHY1_ADDR 0x1 821 #define SGMII_RTK_PHY_ADDR 0x3 822 #define SGMII_AQR_PHY_ADDR 0x2 823 #endif 824 #endif 825 826 #ifdef CONFIG_FMAN_ENET 827 #define CONFIG_MII /* MII PHY management */ 828 #define CONFIG_ETHPRIME "FM1@DTSEC4" 829 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 830 #endif 831 832 /* 833 * Dynamic MTD Partition support with mtdparts 834 */ 835 #ifndef CONFIG_SYS_NO_FLASH 836 #define CONFIG_MTD_DEVICE 837 #define CONFIG_MTD_PARTITIONS 838 #define CONFIG_CMD_MTDPARTS 839 #define CONFIG_FLASH_CFI_MTD 840 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 841 "spi0=spife110000.1" 842 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 843 "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ 844 "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ 845 "1m(uboot),5m(kernel),128k(dtb),-(user)" 846 #endif 847 848 /* 849 * Environment 850 */ 851 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 852 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 853 854 /* 855 * Command line configuration. 856 */ 857 #include <config_cmd_default.h> 858 859 #define CONFIG_CMD_DATE 860 #define CONFIG_CMD_DHCP 861 #define CONFIG_CMD_EEPROM 862 #define CONFIG_CMD_ELF 863 #define CONFIG_CMD_ERRATA 864 #define CONFIG_CMD_GREPENV 865 #define CONFIG_CMD_IRQ 866 #define CONFIG_CMD_I2C 867 #define CONFIG_CMD_MII 868 #define CONFIG_CMD_PING 869 #define CONFIG_CMD_ECHO 870 #define CONFIG_CMD_REGINFO 871 #define CONFIG_CMD_SETEXPR 872 #define CONFIG_CMD_BDI 873 874 #ifdef CONFIG_PCI 875 #define CONFIG_CMD_PCI 876 #define CONFIG_CMD_NET 877 #endif 878 879 /* 880 * Miscellaneous configurable options 881 */ 882 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 883 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 884 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 885 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 886 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 887 #ifdef CONFIG_CMD_KGDB 888 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 889 #else 890 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 891 #endif 892 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 893 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 894 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 895 896 /* 897 * For booting Linux, the board info and command line data 898 * have to be in the first 64 MB of memory, since this is 899 * the maximum mapped by the Linux kernel during initialization. 900 */ 901 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 902 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 903 904 #ifdef CONFIG_CMD_KGDB 905 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 906 #endif 907 908 /* 909 * Environment Configuration 910 */ 911 #define CONFIG_ROOTPATH "/opt/nfsroot" 912 #define CONFIG_BOOTFILE "uImage" 913 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 914 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 915 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 916 #define CONFIG_BAUDRATE 115200 917 #define __USB_PHY_TYPE utmi 918 919 #ifdef CONFIG_PPC_T1024 920 #define CONFIG_BOARDNAME t1024rdb 921 #define BANK_INTLV cs0_cs1 922 #else 923 #define CONFIG_BOARDNAME t1023rdb 924 #define BANK_INTLV null 925 #endif 926 927 #define CONFIG_EXTRA_ENV_SETTINGS \ 928 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 929 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 930 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 931 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 932 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 933 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 934 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 935 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 936 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 937 "netdev=eth0\0" \ 938 "tftpflash=tftpboot $loadaddr $uboot && " \ 939 "protect off $ubootaddr +$filesize && " \ 940 "erase $ubootaddr +$filesize && " \ 941 "cp.b $loadaddr $ubootaddr $filesize && " \ 942 "protect on $ubootaddr +$filesize && " \ 943 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 944 "consoledev=ttyS0\0" \ 945 "ramdiskaddr=2000000\0" \ 946 "fdtaddr=c00000\0" \ 947 "bdev=sda3\0" 948 949 #define CONFIG_LINUX \ 950 "setenv bootargs root=/dev/ram rw " \ 951 "console=$consoledev,$baudrate $othbootargs;" \ 952 "setenv ramdiskaddr 0x02000000;" \ 953 "setenv fdtaddr 0x00c00000;" \ 954 "setenv loadaddr 0x1000000;" \ 955 "bootm $loadaddr $ramdiskaddr $fdtaddr" 956 957 958 #define CONFIG_NFSBOOTCOMMAND \ 959 "setenv bootargs root=/dev/nfs rw " \ 960 "nfsroot=$serverip:$rootpath " \ 961 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 962 "console=$consoledev,$baudrate $othbootargs;" \ 963 "tftp $loadaddr $bootfile;" \ 964 "tftp $fdtaddr $fdtfile;" \ 965 "bootm $loadaddr - $fdtaddr" 966 967 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 968 969 #ifdef CONFIG_SECURE_BOOT 970 #include <asm/fsl_secure_boot.h> 971 #endif 972 973 #endif /* __T1024RDB_H */ 974