1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2014 Freescale Semiconductor, Inc. 4 */ 5 6 /* 7 * T1024/T1023 RDB board configuration file 8 */ 9 10 #ifndef __T1024RDB_H 11 #define __T1024RDB_H 12 13 /* High Level Configuration Options */ 14 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 15 #define CONFIG_ENABLE_36BIT_PHYS 16 17 #ifdef CONFIG_PHYS_64BIT 18 #define CONFIG_ADDR_MAP 1 19 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 20 #endif 21 22 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 23 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 24 25 #define CONFIG_ENV_OVERWRITE 26 27 /* support deep sleep */ 28 #ifdef CONFIG_ARCH_T1024 29 #define CONFIG_DEEP_SLEEP 30 #endif 31 32 #ifdef CONFIG_RAMBOOT_PBL 33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 34 #define CONFIG_SPL_FLUSH_IMAGE 35 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 36 #define CONFIG_SPL_PAD_TO 0x40000 37 #define CONFIG_SPL_MAX_SIZE 0x28000 38 #define RESET_VECTOR_OFFSET 0x27FFC 39 #define BOOT_PAGE_OFFSET 0x27000 40 #ifdef CONFIG_SPL_BUILD 41 #define CONFIG_SPL_SKIP_RELOCATE 42 #define CONFIG_SPL_COMMON_INIT_DDR 43 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 44 #endif 45 46 #ifdef CONFIG_NAND 47 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 48 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 49 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 50 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 51 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 52 #if defined(CONFIG_TARGET_T1024RDB) 53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg 54 #elif defined(CONFIG_TARGET_T1023RDB) 55 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg 56 #endif 57 #define CONFIG_SPL_NAND_BOOT 58 #endif 59 60 #ifdef CONFIG_SPIFLASH 61 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 62 #define CONFIG_SPL_SPI_FLASH_MINIMAL 63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 64 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 67 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 68 #ifndef CONFIG_SPL_BUILD 69 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 70 #endif 71 #if defined(CONFIG_TARGET_T1024RDB) 72 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg 73 #elif defined(CONFIG_TARGET_T1023RDB) 74 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg 75 #endif 76 #define CONFIG_SPL_SPI_BOOT 77 #endif 78 79 #ifdef CONFIG_SDCARD 80 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 81 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 82 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 83 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 84 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 85 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 86 #ifndef CONFIG_SPL_BUILD 87 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 88 #endif 89 #if defined(CONFIG_TARGET_T1024RDB) 90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg 91 #elif defined(CONFIG_TARGET_T1023RDB) 92 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg 93 #endif 94 #define CONFIG_SPL_MMC_BOOT 95 #endif 96 97 #endif /* CONFIG_RAMBOOT_PBL */ 98 99 #ifndef CONFIG_RESET_VECTOR_ADDRESS 100 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 101 #endif 102 103 #ifdef CONFIG_MTD_NOR_FLASH 104 #define CONFIG_FLASH_CFI_DRIVER 105 #define CONFIG_SYS_FLASH_CFI 106 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 107 #endif 108 109 /* PCIe Boot - Master */ 110 #define CONFIG_SRIO_PCIE_BOOT_MASTER 111 /* 112 * for slave u-boot IMAGE instored in master memory space, 113 * PHYS must be aligned based on the SIZE 114 */ 115 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 116 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 117 #ifdef CONFIG_PHYS_64BIT 118 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 119 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 120 #else 121 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 122 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 123 #endif 124 /* 125 * for slave UCODE and ENV instored in master memory space, 126 * PHYS must be aligned based on the SIZE 127 */ 128 #ifdef CONFIG_PHYS_64BIT 129 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 130 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 131 #else 132 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 133 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 134 #endif 135 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 136 /* slave core release by master*/ 137 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 138 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 139 140 /* PCIe Boot - Slave */ 141 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 142 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 143 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 144 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 145 /* Set 1M boot space for PCIe boot */ 146 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 147 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 148 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 149 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 150 #endif 151 152 #if defined(CONFIG_SPIFLASH) 153 #define CONFIG_SYS_EXTRA_ENV_RELOC 154 #define CONFIG_ENV_SPI_BUS 0 155 #define CONFIG_ENV_SPI_CS 0 156 #define CONFIG_ENV_SPI_MAX_HZ 10000000 157 #define CONFIG_ENV_SPI_MODE 0 158 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 159 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 160 #if defined(CONFIG_TARGET_T1024RDB) 161 #define CONFIG_ENV_SECT_SIZE 0x10000 162 #elif defined(CONFIG_TARGET_T1023RDB) 163 #define CONFIG_ENV_SECT_SIZE 0x40000 164 #endif 165 #elif defined(CONFIG_SDCARD) 166 #define CONFIG_SYS_EXTRA_ENV_RELOC 167 #define CONFIG_SYS_MMC_ENV_DEV 0 168 #define CONFIG_ENV_SIZE 0x2000 169 #define CONFIG_ENV_OFFSET (512 * 0x800) 170 #elif defined(CONFIG_NAND) 171 #define CONFIG_SYS_EXTRA_ENV_RELOC 172 #define CONFIG_ENV_SIZE 0x2000 173 #if defined(CONFIG_TARGET_T1024RDB) 174 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 175 #elif defined(CONFIG_TARGET_T1023RDB) 176 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 177 #endif 178 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 179 #define CONFIG_ENV_ADDR 0xffe20000 180 #define CONFIG_ENV_SIZE 0x2000 181 #elif defined(CONFIG_ENV_IS_NOWHERE) 182 #define CONFIG_ENV_SIZE 0x2000 183 #else 184 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 185 #define CONFIG_ENV_SIZE 0x2000 186 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 187 #endif 188 189 #ifndef __ASSEMBLY__ 190 unsigned long get_board_sys_clk(void); 191 unsigned long get_board_ddr_clk(void); 192 #endif 193 194 #define CONFIG_SYS_CLK_FREQ 100000000 195 #define CONFIG_DDR_CLK_FREQ 100000000 196 197 /* 198 * These can be toggled for performance analysis, otherwise use default. 199 */ 200 #define CONFIG_SYS_CACHE_STASHING 201 #define CONFIG_BACKSIDE_L2_CACHE 202 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 203 #define CONFIG_BTB /* toggle branch predition */ 204 #define CONFIG_DDR_ECC 205 #ifdef CONFIG_DDR_ECC 206 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 207 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 208 #endif 209 210 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 211 #define CONFIG_SYS_MEMTEST_END 0x00400000 212 213 /* 214 * Config the L3 Cache as L3 SRAM 215 */ 216 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 217 #define CONFIG_SYS_L3_SIZE (256 << 10) 218 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 219 #ifdef CONFIG_RAMBOOT_PBL 220 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 221 #endif 222 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 223 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 224 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 225 226 #ifdef CONFIG_PHYS_64BIT 227 #define CONFIG_SYS_DCSRBAR 0xf0000000 228 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 229 #endif 230 231 /* EEPROM */ 232 #define CONFIG_ID_EEPROM 233 #define CONFIG_SYS_I2C_EEPROM_NXID 234 #define CONFIG_SYS_EEPROM_BUS_NUM 0 235 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 236 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 237 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 238 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 239 240 /* 241 * DDR Setup 242 */ 243 #define CONFIG_VERY_BIG_RAM 244 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 245 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 246 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 247 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 248 #define CONFIG_FSL_DDR_INTERACTIVE 249 #if defined(CONFIG_TARGET_T1024RDB) 250 #define CONFIG_DDR_SPD 251 #define CONFIG_SYS_SPD_BUS_NUM 0 252 #define SPD_EEPROM_ADDRESS 0x51 253 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 254 #elif defined(CONFIG_TARGET_T1023RDB) 255 #define CONFIG_SYS_DDR_RAW_TIMING 256 #define CONFIG_SYS_SDRAM_SIZE 2048 257 #endif 258 259 /* 260 * IFC Definitions 261 */ 262 #define CONFIG_SYS_FLASH_BASE 0xe8000000 263 #ifdef CONFIG_PHYS_64BIT 264 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 265 #else 266 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 267 #endif 268 269 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 270 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 271 CSPR_PORT_SIZE_16 | \ 272 CSPR_MSEL_NOR | \ 273 CSPR_V) 274 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 275 276 /* NOR Flash Timing Params */ 277 #if defined(CONFIG_TARGET_T1024RDB) 278 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 279 #elif defined(CONFIG_TARGET_T1023RDB) 280 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ 281 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 282 #endif 283 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 284 FTIM0_NOR_TEADC(0x5) | \ 285 FTIM0_NOR_TEAHC(0x5)) 286 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 287 FTIM1_NOR_TRAD_NOR(0x1A) |\ 288 FTIM1_NOR_TSEQRAD_NOR(0x13)) 289 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 290 FTIM2_NOR_TCH(0x4) | \ 291 FTIM2_NOR_TWPH(0x0E) | \ 292 FTIM2_NOR_TWP(0x1c)) 293 #define CONFIG_SYS_NOR_FTIM3 0x0 294 295 #define CONFIG_SYS_FLASH_QUIET_TEST 296 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 297 298 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 299 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 300 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 301 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 302 303 #define CONFIG_SYS_FLASH_EMPTY_INFO 304 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 305 306 #ifdef CONFIG_TARGET_T1024RDB 307 /* CPLD on IFC */ 308 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 309 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 310 #define CONFIG_SYS_CSPR2_EXT (0xf) 311 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 312 | CSPR_PORT_SIZE_8 \ 313 | CSPR_MSEL_GPCM \ 314 | CSPR_V) 315 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 316 #define CONFIG_SYS_CSOR2 0x0 317 318 /* CPLD Timing parameters for IFC CS2 */ 319 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 320 FTIM0_GPCM_TEADC(0x0e) | \ 321 FTIM0_GPCM_TEAHC(0x0e)) 322 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 323 FTIM1_GPCM_TRAD(0x1f)) 324 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 325 FTIM2_GPCM_TCH(0x8) | \ 326 FTIM2_GPCM_TWP(0x1f)) 327 #define CONFIG_SYS_CS2_FTIM3 0x0 328 #endif 329 330 /* NAND Flash on IFC */ 331 #define CONFIG_NAND_FSL_IFC 332 #define CONFIG_SYS_NAND_BASE 0xff800000 333 #ifdef CONFIG_PHYS_64BIT 334 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 335 #else 336 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 337 #endif 338 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 339 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 340 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 341 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 342 | CSPR_V) 343 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 344 345 #if defined(CONFIG_TARGET_T1024RDB) 346 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 347 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 348 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 349 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 350 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 351 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 352 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 353 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 354 #elif defined(CONFIG_TARGET_T1023RDB) 355 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 356 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 357 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 358 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 359 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 360 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 361 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 362 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 363 #endif 364 365 #define CONFIG_SYS_NAND_ONFI_DETECTION 366 /* ONFI NAND Flash mode0 Timing Params */ 367 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 368 FTIM0_NAND_TWP(0x18) | \ 369 FTIM0_NAND_TWCHT(0x07) | \ 370 FTIM0_NAND_TWH(0x0a)) 371 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 372 FTIM1_NAND_TWBE(0x39) | \ 373 FTIM1_NAND_TRR(0x0e) | \ 374 FTIM1_NAND_TRP(0x18)) 375 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 376 FTIM2_NAND_TREH(0x0a) | \ 377 FTIM2_NAND_TWHRE(0x1e)) 378 #define CONFIG_SYS_NAND_FTIM3 0x0 379 380 #define CONFIG_SYS_NAND_DDR_LAW 11 381 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 382 #define CONFIG_SYS_MAX_NAND_DEVICE 1 383 384 #if defined(CONFIG_NAND) 385 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 386 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 387 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 388 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 389 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 390 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 391 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 392 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 393 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 394 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 395 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 396 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 397 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 398 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 399 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 400 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 401 #else 402 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 403 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 404 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 405 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 406 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 407 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 408 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 409 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 410 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 411 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 412 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 413 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 414 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 415 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 416 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 417 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 418 #endif 419 420 #ifdef CONFIG_SPL_BUILD 421 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 422 #else 423 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 424 #endif 425 426 #if defined(CONFIG_RAMBOOT_PBL) 427 #define CONFIG_SYS_RAMBOOT 428 #endif 429 430 #define CONFIG_HWCONFIG 431 432 /* define to use L1 as initial stack */ 433 #define CONFIG_L1_INIT_RAM 434 #define CONFIG_SYS_INIT_RAM_LOCK 435 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 436 #ifdef CONFIG_PHYS_64BIT 437 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 438 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 439 /* The assembler doesn't like typecast */ 440 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 441 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 442 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 443 #else 444 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 445 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 446 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 447 #endif 448 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 449 450 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 451 GENERATED_GBL_DATA_SIZE) 452 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 453 454 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 455 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 456 457 /* Serial Port */ 458 #define CONFIG_SYS_NS16550_SERIAL 459 #define CONFIG_SYS_NS16550_REG_SIZE 1 460 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 461 462 #define CONFIG_SYS_BAUDRATE_TABLE \ 463 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 464 465 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 466 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 467 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 468 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 469 470 /* Video */ 471 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 472 #ifdef CONFIG_FSL_DIU_FB 473 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 474 #define CONFIG_VIDEO_LOGO 475 #define CONFIG_VIDEO_BMP_LOGO 476 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 477 /* 478 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 479 * disable empty flash sector detection, which is I/O-intensive. 480 */ 481 #undef CONFIG_SYS_FLASH_EMPTY_INFO 482 #endif 483 484 /* I2C */ 485 #define CONFIG_SYS_I2C 486 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 487 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 488 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 489 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 490 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 491 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 492 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 493 494 #define I2C_PCA6408_BUS_NUM 1 495 #define I2C_PCA6408_ADDR 0x20 496 497 /* I2C bus multiplexer */ 498 #define I2C_MUX_CH_DEFAULT 0x8 499 500 /* 501 * RTC configuration 502 */ 503 #define RTC 504 #define CONFIG_RTC_DS1337 1 505 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 506 507 /* 508 * eSPI - Enhanced SPI 509 */ 510 #define CONFIG_SPI_FLASH_BAR 511 #define CONFIG_SF_DEFAULT_SPEED 10000000 512 #define CONFIG_SF_DEFAULT_MODE 0 513 514 /* 515 * General PCIe 516 * Memory space is mapped 1-1, but I/O space must start from 0. 517 */ 518 #define CONFIG_PCIE1 /* PCIE controller 1 */ 519 #define CONFIG_PCIE2 /* PCIE controller 2 */ 520 #define CONFIG_PCIE3 /* PCIE controller 3 */ 521 #ifdef CONFIG_ARCH_T1040 522 #define CONFIG_PCIE4 /* PCIE controller 4 */ 523 #endif 524 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 525 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 526 #define CONFIG_PCI_INDIRECT_BRIDGE 527 528 #ifdef CONFIG_PCI 529 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 530 #ifdef CONFIG_PCIE1 531 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 532 #ifdef CONFIG_PHYS_64BIT 533 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 534 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 535 #else 536 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 537 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 538 #endif 539 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 540 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 541 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 542 #ifdef CONFIG_PHYS_64BIT 543 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 544 #else 545 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 546 #endif 547 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 548 #endif 549 550 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 551 #ifdef CONFIG_PCIE2 552 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 553 #ifdef CONFIG_PHYS_64BIT 554 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 555 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 556 #else 557 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 558 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 559 #endif 560 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 561 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 562 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 563 #ifdef CONFIG_PHYS_64BIT 564 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 565 #else 566 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 567 #endif 568 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 569 #endif 570 571 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 572 #ifdef CONFIG_PCIE3 573 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 574 #ifdef CONFIG_PHYS_64BIT 575 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 576 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 577 #else 578 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 579 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 580 #endif 581 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 582 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 583 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 584 #ifdef CONFIG_PHYS_64BIT 585 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 586 #else 587 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 588 #endif 589 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 590 #endif 591 592 /* controller 4, Base address 203000, to be removed */ 593 #ifdef CONFIG_PCIE4 594 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 595 #ifdef CONFIG_PHYS_64BIT 596 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 597 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 598 #else 599 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 600 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 601 #endif 602 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 603 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 604 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 605 #ifdef CONFIG_PHYS_64BIT 606 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 607 #else 608 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 609 #endif 610 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 611 #endif 612 613 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 614 #endif /* CONFIG_PCI */ 615 616 /* 617 * USB 618 */ 619 #define CONFIG_HAS_FSL_DR_USB 620 621 #ifdef CONFIG_HAS_FSL_DR_USB 622 #define CONFIG_USB_EHCI_FSL 623 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 624 #endif 625 626 /* 627 * SDHC 628 */ 629 #ifdef CONFIG_MMC 630 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 631 #endif 632 633 /* Qman/Bman */ 634 #ifndef CONFIG_NOBQFMAN 635 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 636 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 637 #ifdef CONFIG_PHYS_64BIT 638 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 639 #else 640 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 641 #endif 642 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 643 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 644 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 645 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 646 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 647 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 648 CONFIG_SYS_BMAN_CENA_SIZE) 649 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 650 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 651 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 652 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 653 #ifdef CONFIG_PHYS_64BIT 654 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 655 #else 656 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 657 #endif 658 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 659 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 660 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 661 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 662 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 663 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 664 CONFIG_SYS_QMAN_CENA_SIZE) 665 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 666 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 667 668 #define CONFIG_SYS_DPAA_FMAN 669 670 #ifdef CONFIG_TARGET_T1024RDB 671 #define CONFIG_QE 672 #define CONFIG_U_QE 673 #endif 674 /* Default address of microcode for the Linux FMan driver */ 675 #if defined(CONFIG_SPIFLASH) 676 /* 677 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 678 * env, so we got 0x110000. 679 */ 680 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 681 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 682 #define CONFIG_SYS_QE_FW_ADDR 0x130000 683 #elif defined(CONFIG_SDCARD) 684 /* 685 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 686 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 687 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 688 */ 689 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 690 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 691 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 692 #elif defined(CONFIG_NAND) 693 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 694 #if defined(CONFIG_TARGET_T1024RDB) 695 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 696 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 697 #elif defined(CONFIG_TARGET_T1023RDB) 698 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 699 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 700 #endif 701 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 702 /* 703 * Slave has no ucode locally, it can fetch this from remote. When implementing 704 * in two corenet boards, slave's ucode could be stored in master's memory 705 * space, the address can be mapped from slave TLB->slave LAW-> 706 * slave SRIO or PCIE outbound window->master inbound window-> 707 * master LAW->the ucode address in master's memory space. 708 */ 709 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 710 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 711 #else 712 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 713 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 714 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 715 #endif 716 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 717 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 718 #endif /* CONFIG_NOBQFMAN */ 719 720 #ifdef CONFIG_SYS_DPAA_FMAN 721 #define CONFIG_FMAN_ENET 722 #define CONFIG_PHYLIB_10G 723 #define CONFIG_PHY_REALTEK 724 #define CONFIG_PHY_AQUANTIA 725 #if defined(CONFIG_TARGET_T1024RDB) 726 #define RGMII_PHY1_ADDR 0x2 727 #define RGMII_PHY2_ADDR 0x6 728 #define SGMII_AQR_PHY_ADDR 0x2 729 #define FM1_10GEC1_PHY_ADDR 0x1 730 #elif defined(CONFIG_TARGET_T1023RDB) 731 #define RGMII_PHY1_ADDR 0x1 732 #define SGMII_RTK_PHY_ADDR 0x3 733 #define SGMII_AQR_PHY_ADDR 0x2 734 #endif 735 #endif 736 737 #ifdef CONFIG_FMAN_ENET 738 #define CONFIG_ETHPRIME "FM1@DTSEC4" 739 #endif 740 741 /* 742 * Dynamic MTD Partition support with mtdparts 743 */ 744 #ifdef CONFIG_MTD_NOR_FLASH 745 #define CONFIG_FLASH_CFI_MTD 746 #endif 747 748 /* 749 * Environment 750 */ 751 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 752 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 753 754 /* 755 * Miscellaneous configurable options 756 */ 757 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 758 759 /* 760 * For booting Linux, the board info and command line data 761 * have to be in the first 64 MB of memory, since this is 762 * the maximum mapped by the Linux kernel during initialization. 763 */ 764 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 765 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 766 767 #ifdef CONFIG_CMD_KGDB 768 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 769 #endif 770 771 /* 772 * Environment Configuration 773 */ 774 #define CONFIG_ROOTPATH "/opt/nfsroot" 775 #define CONFIG_BOOTFILE "uImage" 776 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 777 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 778 #define __USB_PHY_TYPE utmi 779 780 #ifdef CONFIG_ARCH_T1024 781 #define CONFIG_BOARDNAME t1024rdb 782 #define BANK_INTLV cs0_cs1 783 #else 784 #define CONFIG_BOARDNAME t1023rdb 785 #define BANK_INTLV null 786 #endif 787 788 #define CONFIG_EXTRA_ENV_SETTINGS \ 789 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 790 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 791 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 792 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 793 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 794 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 795 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 796 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 797 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 798 "netdev=eth0\0" \ 799 "tftpflash=tftpboot $loadaddr $uboot && " \ 800 "protect off $ubootaddr +$filesize && " \ 801 "erase $ubootaddr +$filesize && " \ 802 "cp.b $loadaddr $ubootaddr $filesize && " \ 803 "protect on $ubootaddr +$filesize && " \ 804 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 805 "consoledev=ttyS0\0" \ 806 "ramdiskaddr=2000000\0" \ 807 "fdtaddr=1e00000\0" \ 808 "bdev=sda3\0" 809 810 #define CONFIG_LINUX \ 811 "setenv bootargs root=/dev/ram rw " \ 812 "console=$consoledev,$baudrate $othbootargs;" \ 813 "setenv ramdiskaddr 0x02000000;" \ 814 "setenv fdtaddr 0x00c00000;" \ 815 "setenv loadaddr 0x1000000;" \ 816 "bootm $loadaddr $ramdiskaddr $fdtaddr" 817 818 #define CONFIG_NFSBOOTCOMMAND \ 819 "setenv bootargs root=/dev/nfs rw " \ 820 "nfsroot=$serverip:$rootpath " \ 821 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 822 "console=$consoledev,$baudrate $othbootargs;" \ 823 "tftp $loadaddr $bootfile;" \ 824 "tftp $fdtaddr $fdtfile;" \ 825 "bootm $loadaddr - $fdtaddr" 826 827 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 828 829 #include <asm/fsl_secure_boot.h> 830 831 #endif /* __T1024RDB_H */ 832