1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 RDB board configuration file 9 */ 10 11 #ifndef __T1024RDB_H 12 #define __T1024RDB_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_DISPLAY_BOARDINFO 17 #define CONFIG_BOOKE 18 #define CONFIG_E500 /* BOOKE e500 family */ 19 #define CONFIG_E500MC /* BOOKE e500mc family */ 20 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 21 #define CONFIG_MP /* support multiple processors */ 22 #define CONFIG_PHYS_64BIT 23 #define CONFIG_ENABLE_36BIT_PHYS 24 25 #ifdef CONFIG_PHYS_64BIT 26 #define CONFIG_ADDR_MAP 1 27 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 28 #endif 29 30 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 31 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 32 #define CONFIG_FSL_IFC /* Enable IFC Support */ 33 34 #define CONFIG_FSL_LAW /* Use common FSL init code */ 35 #define CONFIG_ENV_OVERWRITE 36 37 /* support deep sleep */ 38 #ifdef CONFIG_PPC_T1024 39 #define CONFIG_DEEP_SLEEP 40 #endif 41 #if defined(CONFIG_DEEP_SLEEP) 42 #define CONFIG_SILENT_CONSOLE 43 #define CONFIG_BOARD_EARLY_INIT_F 44 #endif 45 46 #ifdef CONFIG_RAMBOOT_PBL 47 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 48 #if defined(CONFIG_T1024RDB) 49 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg 50 #elif defined(CONFIG_T1023RDB) 51 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_rcw.cfg 52 #endif 53 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 54 #define CONFIG_SPL_ENV_SUPPORT 55 #define CONFIG_SPL_SERIAL_SUPPORT 56 #define CONFIG_SPL_FLUSH_IMAGE 57 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 58 #define CONFIG_SPL_LIBGENERIC_SUPPORT 59 #define CONFIG_SPL_LIBCOMMON_SUPPORT 60 #define CONFIG_SPL_I2C_SUPPORT 61 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 62 #define CONFIG_FSL_LAW /* Use common FSL init code */ 63 #define CONFIG_SYS_TEXT_BASE 0x30001000 64 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 65 #define CONFIG_SPL_PAD_TO 0x40000 66 #define CONFIG_SPL_MAX_SIZE 0x28000 67 #define RESET_VECTOR_OFFSET 0x27FFC 68 #define BOOT_PAGE_OFFSET 0x27000 69 #ifdef CONFIG_SPL_BUILD 70 #define CONFIG_SPL_SKIP_RELOCATE 71 #define CONFIG_SPL_COMMON_INIT_DDR 72 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 73 #define CONFIG_SYS_NO_FLASH 74 #endif 75 76 #ifdef CONFIG_NAND 77 #define CONFIG_SPL_NAND_SUPPORT 78 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 79 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 80 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 81 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 82 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 83 #define CONFIG_SPL_NAND_BOOT 84 #endif 85 86 #ifdef CONFIG_SPIFLASH 87 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 88 #define CONFIG_SPL_SPI_SUPPORT 89 #define CONFIG_SPL_SPI_FLASH_SUPPORT 90 #define CONFIG_SPL_SPI_FLASH_MINIMAL 91 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 92 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 93 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 94 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 95 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 96 #ifndef CONFIG_SPL_BUILD 97 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 98 #endif 99 #define CONFIG_SPL_SPI_BOOT 100 #endif 101 102 #ifdef CONFIG_SDCARD 103 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 104 #define CONFIG_SPL_MMC_SUPPORT 105 #define CONFIG_SPL_MMC_MINIMAL 106 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 107 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 108 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 109 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 110 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 111 #ifndef CONFIG_SPL_BUILD 112 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 113 #endif 114 #define CONFIG_SPL_MMC_BOOT 115 #endif 116 117 #endif /* CONFIG_RAMBOOT_PBL */ 118 119 #ifndef CONFIG_SYS_TEXT_BASE 120 #define CONFIG_SYS_TEXT_BASE 0xeff40000 121 #endif 122 123 #ifndef CONFIG_RESET_VECTOR_ADDRESS 124 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 125 #endif 126 127 #ifndef CONFIG_SYS_NO_FLASH 128 #define CONFIG_FLASH_CFI_DRIVER 129 #define CONFIG_SYS_FLASH_CFI 130 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 131 #endif 132 133 /* PCIe Boot - Master */ 134 #define CONFIG_SRIO_PCIE_BOOT_MASTER 135 /* 136 * for slave u-boot IMAGE instored in master memory space, 137 * PHYS must be aligned based on the SIZE 138 */ 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 140 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 141 #ifdef CONFIG_PHYS_64BIT 142 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 143 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 144 #else 145 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 146 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 147 #endif 148 /* 149 * for slave UCODE and ENV instored in master memory space, 150 * PHYS must be aligned based on the SIZE 151 */ 152 #ifdef CONFIG_PHYS_64BIT 153 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 154 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 155 #else 156 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 157 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 158 #endif 159 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 160 /* slave core release by master*/ 161 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 162 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 163 164 /* PCIe Boot - Slave */ 165 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 166 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 167 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 168 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 169 /* Set 1M boot space for PCIe boot */ 170 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 171 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 172 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 173 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 174 #define CONFIG_SYS_NO_FLASH 175 #endif 176 177 #if defined(CONFIG_SPIFLASH) 178 #define CONFIG_SYS_EXTRA_ENV_RELOC 179 #define CONFIG_ENV_IS_IN_SPI_FLASH 180 #define CONFIG_ENV_SPI_BUS 0 181 #define CONFIG_ENV_SPI_CS 0 182 #define CONFIG_ENV_SPI_MAX_HZ 10000000 183 #define CONFIG_ENV_SPI_MODE 0 184 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 185 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 186 #if defined(CONFIG_T1024RDB) 187 #define CONFIG_ENV_SECT_SIZE 0x10000 188 #elif defined(CONFIG_T1023RDB) 189 #define CONFIG_ENV_SECT_SIZE 0x40000 190 #endif 191 #elif defined(CONFIG_SDCARD) 192 #define CONFIG_SYS_EXTRA_ENV_RELOC 193 #define CONFIG_ENV_IS_IN_MMC 194 #define CONFIG_SYS_MMC_ENV_DEV 0 195 #define CONFIG_ENV_SIZE 0x2000 196 #define CONFIG_ENV_OFFSET (512 * 0x800) 197 #elif defined(CONFIG_NAND) 198 #define CONFIG_SYS_EXTRA_ENV_RELOC 199 #define CONFIG_ENV_IS_IN_NAND 200 #define CONFIG_ENV_SIZE 0x2000 201 #if defined(CONFIG_T1024RDB) 202 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 203 #elif defined(CONFIG_T1023RDB) 204 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 205 #endif 206 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 207 #define CONFIG_ENV_IS_IN_REMOTE 208 #define CONFIG_ENV_ADDR 0xffe20000 209 #define CONFIG_ENV_SIZE 0x2000 210 #elif defined(CONFIG_ENV_IS_NOWHERE) 211 #define CONFIG_ENV_SIZE 0x2000 212 #else 213 #define CONFIG_ENV_IS_IN_FLASH 214 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 215 #define CONFIG_ENV_SIZE 0x2000 216 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 217 #endif 218 219 220 #ifndef __ASSEMBLY__ 221 unsigned long get_board_sys_clk(void); 222 unsigned long get_board_ddr_clk(void); 223 #endif 224 225 #define CONFIG_SYS_CLK_FREQ 100000000 226 #define CONFIG_DDR_CLK_FREQ 100000000 227 228 /* 229 * These can be toggled for performance analysis, otherwise use default. 230 */ 231 #define CONFIG_SYS_CACHE_STASHING 232 #define CONFIG_BACKSIDE_L2_CACHE 233 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 234 #define CONFIG_BTB /* toggle branch predition */ 235 #define CONFIG_DDR_ECC 236 #ifdef CONFIG_DDR_ECC 237 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 238 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 239 #endif 240 241 #define CONFIG_CMD_MEMTEST 242 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 243 #define CONFIG_SYS_MEMTEST_END 0x00400000 244 #define CONFIG_SYS_ALT_MEMTEST 245 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 246 247 /* 248 * Config the L3 Cache as L3 SRAM 249 */ 250 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 251 #define CONFIG_SYS_L3_SIZE (256 << 10) 252 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 253 #ifdef CONFIG_RAMBOOT_PBL 254 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 255 #endif 256 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 257 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 258 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 259 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 260 261 #ifdef CONFIG_PHYS_64BIT 262 #define CONFIG_SYS_DCSRBAR 0xf0000000 263 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 264 #endif 265 266 /* EEPROM */ 267 #define CONFIG_ID_EEPROM 268 #define CONFIG_SYS_I2C_EEPROM_NXID 269 #define CONFIG_SYS_EEPROM_BUS_NUM 0 270 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 271 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 272 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 273 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 274 275 /* 276 * DDR Setup 277 */ 278 #define CONFIG_VERY_BIG_RAM 279 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 280 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 281 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 282 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 283 #define CONFIG_FSL_DDR_INTERACTIVE 284 #if defined(CONFIG_T1024RDB) 285 #define CONFIG_DDR_SPD 286 #define CONFIG_SYS_FSL_DDR3 287 #define CONFIG_SYS_SPD_BUS_NUM 0 288 #define SPD_EEPROM_ADDRESS 0x51 289 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 290 #elif defined(CONFIG_T1023RDB) 291 #define CONFIG_SYS_FSL_DDR4 292 #define CONFIG_SYS_DDR_RAW_TIMING 293 #define CONFIG_SYS_SDRAM_SIZE 2048 294 #endif 295 296 /* 297 * IFC Definitions 298 */ 299 #define CONFIG_SYS_FLASH_BASE 0xe8000000 300 #ifdef CONFIG_PHYS_64BIT 301 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 302 #else 303 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 304 #endif 305 306 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 307 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 308 CSPR_PORT_SIZE_16 | \ 309 CSPR_MSEL_NOR | \ 310 CSPR_V) 311 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 312 313 /* NOR Flash Timing Params */ 314 #if defined(CONFIG_T1024RDB) 315 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 316 #elif defined(CONFIG_T1023RDB) 317 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ 318 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 319 #endif 320 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 321 FTIM0_NOR_TEADC(0x5) | \ 322 FTIM0_NOR_TEAHC(0x5)) 323 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 324 FTIM1_NOR_TRAD_NOR(0x1A) |\ 325 FTIM1_NOR_TSEQRAD_NOR(0x13)) 326 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 327 FTIM2_NOR_TCH(0x4) | \ 328 FTIM2_NOR_TWPH(0x0E) | \ 329 FTIM2_NOR_TWP(0x1c)) 330 #define CONFIG_SYS_NOR_FTIM3 0x0 331 332 #define CONFIG_SYS_FLASH_QUIET_TEST 333 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 334 335 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 336 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 337 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 338 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 339 340 #define CONFIG_SYS_FLASH_EMPTY_INFO 341 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 342 343 #ifdef CONFIG_T1024RDB 344 /* CPLD on IFC */ 345 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 346 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 347 #define CONFIG_SYS_CSPR2_EXT (0xf) 348 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 349 | CSPR_PORT_SIZE_8 \ 350 | CSPR_MSEL_GPCM \ 351 | CSPR_V) 352 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 353 #define CONFIG_SYS_CSOR2 0x0 354 355 /* CPLD Timing parameters for IFC CS2 */ 356 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 357 FTIM0_GPCM_TEADC(0x0e) | \ 358 FTIM0_GPCM_TEAHC(0x0e)) 359 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 360 FTIM1_GPCM_TRAD(0x1f)) 361 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 362 FTIM2_GPCM_TCH(0x8) | \ 363 FTIM2_GPCM_TWP(0x1f)) 364 #define CONFIG_SYS_CS2_FTIM3 0x0 365 #endif 366 367 /* NAND Flash on IFC */ 368 #define CONFIG_NAND_FSL_IFC 369 #define CONFIG_SYS_NAND_BASE 0xff800000 370 #ifdef CONFIG_PHYS_64BIT 371 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 372 #else 373 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 374 #endif 375 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 376 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 377 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 378 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 379 | CSPR_V) 380 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 381 382 #if defined(CONFIG_T1024RDB) 383 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 384 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 385 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 386 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 387 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 388 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 389 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 390 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 391 #elif defined(CONFIG_T1023RDB) 392 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 393 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 394 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 395 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 396 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 397 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 398 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 399 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 400 #endif 401 402 #define CONFIG_SYS_NAND_ONFI_DETECTION 403 /* ONFI NAND Flash mode0 Timing Params */ 404 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 405 FTIM0_NAND_TWP(0x18) | \ 406 FTIM0_NAND_TWCHT(0x07) | \ 407 FTIM0_NAND_TWH(0x0a)) 408 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 409 FTIM1_NAND_TWBE(0x39) | \ 410 FTIM1_NAND_TRR(0x0e) | \ 411 FTIM1_NAND_TRP(0x18)) 412 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 413 FTIM2_NAND_TREH(0x0a) | \ 414 FTIM2_NAND_TWHRE(0x1e)) 415 #define CONFIG_SYS_NAND_FTIM3 0x0 416 417 #define CONFIG_SYS_NAND_DDR_LAW 11 418 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 419 #define CONFIG_SYS_MAX_NAND_DEVICE 1 420 #define CONFIG_CMD_NAND 421 422 #if defined(CONFIG_NAND) 423 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 424 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 425 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 426 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 427 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 428 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 429 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 430 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 431 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 432 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 433 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 434 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 435 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 436 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 437 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 438 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 439 #else 440 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 441 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 442 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 443 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 444 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 445 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 446 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 447 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 448 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 449 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 450 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 451 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 452 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 453 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 454 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 455 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 456 #endif 457 458 #ifdef CONFIG_SPL_BUILD 459 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 460 #else 461 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 462 #endif 463 464 #if defined(CONFIG_RAMBOOT_PBL) 465 #define CONFIG_SYS_RAMBOOT 466 #endif 467 468 #define CONFIG_BOARD_EARLY_INIT_R 469 #define CONFIG_MISC_INIT_R 470 471 #define CONFIG_HWCONFIG 472 473 /* define to use L1 as initial stack */ 474 #define CONFIG_L1_INIT_RAM 475 #define CONFIG_SYS_INIT_RAM_LOCK 476 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 477 #ifdef CONFIG_PHYS_64BIT 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 480 /* The assembler doesn't like typecast */ 481 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 482 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 483 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 484 #else 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 486 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 487 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 488 #endif 489 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 490 491 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 492 GENERATED_GBL_DATA_SIZE) 493 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 494 495 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 496 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 497 498 /* Serial Port */ 499 #define CONFIG_CONS_INDEX 1 500 #define CONFIG_SYS_NS16550 501 #define CONFIG_SYS_NS16550_SERIAL 502 #define CONFIG_SYS_NS16550_REG_SIZE 1 503 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 504 505 #define CONFIG_SYS_BAUDRATE_TABLE \ 506 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 507 508 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 509 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 510 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 511 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 512 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 513 514 /* Use the HUSH parser */ 515 #define CONFIG_SYS_HUSH_PARSER 516 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 517 518 /* Video */ 519 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 520 #ifdef CONFIG_FSL_DIU_FB 521 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 522 #define CONFIG_VIDEO 523 #define CONFIG_CMD_BMP 524 #define CONFIG_CFB_CONSOLE 525 #define CONFIG_VIDEO_SW_CURSOR 526 #define CONFIG_VGA_AS_SINGLE_DEVICE 527 #define CONFIG_VIDEO_LOGO 528 #define CONFIG_VIDEO_BMP_LOGO 529 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 530 /* 531 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 532 * disable empty flash sector detection, which is I/O-intensive. 533 */ 534 #undef CONFIG_SYS_FLASH_EMPTY_INFO 535 #endif 536 537 /* pass open firmware flat tree */ 538 #define CONFIG_OF_LIBFDT 539 #define CONFIG_OF_BOARD_SETUP 540 #define CONFIG_OF_STDOUT_VIA_ALIAS 541 542 /* new uImage format support */ 543 #define CONFIG_FIT 544 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 545 546 /* I2C */ 547 #define CONFIG_SYS_I2C 548 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 549 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 550 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 551 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 552 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 553 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 554 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 555 556 #define I2C_PCA6408_BUS_NUM 1 557 #define I2C_PCA6408_ADDR 0x20 558 559 /* I2C bus multiplexer */ 560 #define I2C_MUX_CH_DEFAULT 0x8 561 562 /* 563 * RTC configuration 564 */ 565 #define RTC 566 #define CONFIG_RTC_DS1337 1 567 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 568 569 /* 570 * eSPI - Enhanced SPI 571 */ 572 #define CONFIG_FSL_ESPI 573 #if defined(CONFIG_T1024RDB) 574 #define CONFIG_SPI_FLASH_STMICRO 575 #elif defined(CONFIG_T1023RDB) 576 #define CONFIG_SPI_FLASH_SPANSION 577 #endif 578 #define CONFIG_CMD_SF 579 #define CONFIG_SPI_FLASH_BAR 580 #define CONFIG_SF_DEFAULT_SPEED 10000000 581 #define CONFIG_SF_DEFAULT_MODE 0 582 583 /* 584 * General PCIe 585 * Memory space is mapped 1-1, but I/O space must start from 0. 586 */ 587 #define CONFIG_PCI /* Enable PCI/PCIE */ 588 #define CONFIG_PCIE1 /* PCIE controler 1 */ 589 #define CONFIG_PCIE2 /* PCIE controler 2 */ 590 #define CONFIG_PCIE3 /* PCIE controler 3 */ 591 #ifdef CONFIG_PPC_T1040 592 #define CONFIG_PCIE4 /* PCIE controler 4 */ 593 #endif 594 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 595 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 596 #define CONFIG_PCI_INDIRECT_BRIDGE 597 598 #ifdef CONFIG_PCI 599 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 600 #ifdef CONFIG_PCIE1 601 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 602 #ifdef CONFIG_PHYS_64BIT 603 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 604 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 605 #else 606 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 607 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 608 #endif 609 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 610 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 611 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 612 #ifdef CONFIG_PHYS_64BIT 613 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 614 #else 615 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 616 #endif 617 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 618 #endif 619 620 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 621 #ifdef CONFIG_PCIE2 622 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 623 #ifdef CONFIG_PHYS_64BIT 624 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 625 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 626 #else 627 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 628 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 629 #endif 630 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 631 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 632 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 633 #ifdef CONFIG_PHYS_64BIT 634 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 635 #else 636 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 637 #endif 638 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 639 #endif 640 641 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 642 #ifdef CONFIG_PCIE3 643 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 644 #ifdef CONFIG_PHYS_64BIT 645 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 646 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 647 #else 648 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 649 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 650 #endif 651 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 652 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 653 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 654 #ifdef CONFIG_PHYS_64BIT 655 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 656 #else 657 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 658 #endif 659 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 660 #endif 661 662 /* controller 4, Base address 203000, to be removed */ 663 #ifdef CONFIG_PCIE4 664 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 665 #ifdef CONFIG_PHYS_64BIT 666 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 667 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 668 #else 669 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 670 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 671 #endif 672 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 673 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 674 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 675 #ifdef CONFIG_PHYS_64BIT 676 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 677 #else 678 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 679 #endif 680 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 681 #endif 682 683 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 684 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 685 #define CONFIG_DOS_PARTITION 686 #endif /* CONFIG_PCI */ 687 688 /* 689 * USB 690 */ 691 #define CONFIG_HAS_FSL_DR_USB 692 693 #ifdef CONFIG_HAS_FSL_DR_USB 694 #define CONFIG_USB_EHCI 695 #define CONFIG_CMD_USB 696 #define CONFIG_USB_STORAGE 697 #define CONFIG_USB_EHCI_FSL 698 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 699 #define CONFIG_CMD_EXT2 700 #endif 701 702 /* 703 * SDHC 704 */ 705 #define CONFIG_MMC 706 #ifdef CONFIG_MMC 707 #define CONFIG_FSL_ESDHC 708 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 709 #define CONFIG_CMD_MMC 710 #define CONFIG_GENERIC_MMC 711 #define CONFIG_CMD_EXT2 712 #define CONFIG_CMD_FAT 713 #define CONFIG_DOS_PARTITION 714 #endif 715 716 /* Qman/Bman */ 717 #ifndef CONFIG_NOBQFMAN 718 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 719 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 720 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 721 #ifdef CONFIG_PHYS_64BIT 722 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 723 #else 724 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 725 #endif 726 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 727 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 728 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 729 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 730 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 731 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 732 CONFIG_SYS_BMAN_CENA_SIZE) 733 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 734 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 735 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 736 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 737 #ifdef CONFIG_PHYS_64BIT 738 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 739 #else 740 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 741 #endif 742 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 743 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 744 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 745 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 746 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 747 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 748 CONFIG_SYS_QMAN_CENA_SIZE) 749 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 750 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 751 752 #define CONFIG_SYS_DPAA_FMAN 753 754 #ifdef CONFIG_T1024RDB 755 #define CONFIG_QE 756 #define CONFIG_U_QE 757 #endif 758 /* Default address of microcode for the Linux FMan driver */ 759 #if defined(CONFIG_SPIFLASH) 760 /* 761 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 762 * env, so we got 0x110000. 763 */ 764 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 765 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 766 #define CONFIG_SYS_QE_FW_ADDR 0x130000 767 #elif defined(CONFIG_SDCARD) 768 /* 769 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 770 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 771 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 772 */ 773 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 774 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 775 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 776 #elif defined(CONFIG_NAND) 777 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 778 #if defined(CONFIG_T1024RDB) 779 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 780 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 781 #elif defined(CONFIG_T1023RDB) 782 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 783 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 784 #endif 785 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 786 /* 787 * Slave has no ucode locally, it can fetch this from remote. When implementing 788 * in two corenet boards, slave's ucode could be stored in master's memory 789 * space, the address can be mapped from slave TLB->slave LAW-> 790 * slave SRIO or PCIE outbound window->master inbound window-> 791 * master LAW->the ucode address in master's memory space. 792 */ 793 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 794 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 795 #else 796 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 797 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 798 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 799 #endif 800 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 801 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 802 #endif /* CONFIG_NOBQFMAN */ 803 804 #ifdef CONFIG_SYS_DPAA_FMAN 805 #define CONFIG_FMAN_ENET 806 #define CONFIG_PHYLIB_10G 807 #define CONFIG_PHY_REALTEK 808 #define CONFIG_PHY_AQUANTIA 809 #if defined(CONFIG_T1024RDB) 810 #define RGMII_PHY1_ADDR 0x2 811 #define RGMII_PHY2_ADDR 0x6 812 #define SGMII_AQR_PHY_ADDR 0x2 813 #define FM1_10GEC1_PHY_ADDR 0x1 814 #elif defined(CONFIG_T1023RDB) 815 #define RGMII_PHY1_ADDR 0x1 816 #define SGMII_RTK_PHY_ADDR 0x3 817 #define SGMII_AQR_PHY_ADDR 0x2 818 #endif 819 #endif 820 821 #ifdef CONFIG_FMAN_ENET 822 #define CONFIG_MII /* MII PHY management */ 823 #define CONFIG_ETHPRIME "FM1@DTSEC4" 824 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 825 #endif 826 827 /* 828 * Dynamic MTD Partition support with mtdparts 829 */ 830 #ifndef CONFIG_SYS_NO_FLASH 831 #define CONFIG_MTD_DEVICE 832 #define CONFIG_MTD_PARTITIONS 833 #define CONFIG_CMD_MTDPARTS 834 #define CONFIG_FLASH_CFI_MTD 835 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 836 "spi0=spife110000.1" 837 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 838 "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ 839 "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ 840 "1m(uboot),5m(kernel),128k(dtb),-(user)" 841 #endif 842 843 /* 844 * Environment 845 */ 846 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 847 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 848 849 /* 850 * Command line configuration. 851 */ 852 #define CONFIG_CMD_DATE 853 #define CONFIG_CMD_DHCP 854 #define CONFIG_CMD_EEPROM 855 #define CONFIG_CMD_ELF 856 #define CONFIG_CMD_ERRATA 857 #define CONFIG_CMD_GREPENV 858 #define CONFIG_CMD_IRQ 859 #define CONFIG_CMD_I2C 860 #define CONFIG_CMD_MII 861 #define CONFIG_CMD_PING 862 #define CONFIG_CMD_REGINFO 863 864 #ifdef CONFIG_PCI 865 #define CONFIG_CMD_PCI 866 #endif 867 868 /* 869 * Miscellaneous configurable options 870 */ 871 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 872 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 873 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 874 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 875 #ifdef CONFIG_CMD_KGDB 876 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 877 #else 878 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 879 #endif 880 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 881 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 882 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 883 884 /* 885 * For booting Linux, the board info and command line data 886 * have to be in the first 64 MB of memory, since this is 887 * the maximum mapped by the Linux kernel during initialization. 888 */ 889 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 890 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 891 892 #ifdef CONFIG_CMD_KGDB 893 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 894 #endif 895 896 /* 897 * Environment Configuration 898 */ 899 #define CONFIG_ROOTPATH "/opt/nfsroot" 900 #define CONFIG_BOOTFILE "uImage" 901 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 902 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 903 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 904 #define CONFIG_BAUDRATE 115200 905 #define __USB_PHY_TYPE utmi 906 907 #ifdef CONFIG_PPC_T1024 908 #define CONFIG_BOARDNAME t1024rdb 909 #define BANK_INTLV cs0_cs1 910 #else 911 #define CONFIG_BOARDNAME t1023rdb 912 #define BANK_INTLV null 913 #endif 914 915 #define CONFIG_EXTRA_ENV_SETTINGS \ 916 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 917 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 918 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 919 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 920 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 921 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 922 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 923 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 924 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 925 "netdev=eth0\0" \ 926 "tftpflash=tftpboot $loadaddr $uboot && " \ 927 "protect off $ubootaddr +$filesize && " \ 928 "erase $ubootaddr +$filesize && " \ 929 "cp.b $loadaddr $ubootaddr $filesize && " \ 930 "protect on $ubootaddr +$filesize && " \ 931 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 932 "consoledev=ttyS0\0" \ 933 "ramdiskaddr=2000000\0" \ 934 "fdtaddr=c00000\0" \ 935 "bdev=sda3\0" 936 937 #define CONFIG_LINUX \ 938 "setenv bootargs root=/dev/ram rw " \ 939 "console=$consoledev,$baudrate $othbootargs;" \ 940 "setenv ramdiskaddr 0x02000000;" \ 941 "setenv fdtaddr 0x00c00000;" \ 942 "setenv loadaddr 0x1000000;" \ 943 "bootm $loadaddr $ramdiskaddr $fdtaddr" 944 945 946 #define CONFIG_NFSBOOTCOMMAND \ 947 "setenv bootargs root=/dev/nfs rw " \ 948 "nfsroot=$serverip:$rootpath " \ 949 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 950 "console=$consoledev,$baudrate $othbootargs;" \ 951 "tftp $loadaddr $bootfile;" \ 952 "tftp $fdtaddr $fdtfile;" \ 953 "bootm $loadaddr - $fdtaddr" 954 955 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 956 957 #ifdef CONFIG_SECURE_BOOT 958 #include <asm/fsl_secure_boot.h> 959 #endif 960 961 #endif /* __T1024RDB_H */ 962