1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 RDB board configuration file 9 */ 10 11 #ifndef __T1024RDB_H 12 #define __T1024RDB_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_BOOKE 16 #define CONFIG_E500 /* BOOKE e500 family */ 17 #define CONFIG_E500MC /* BOOKE e500mc family */ 18 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 19 #define CONFIG_MP /* support multiple processors */ 20 #define CONFIG_ENABLE_36BIT_PHYS 21 22 #ifdef CONFIG_PHYS_64BIT 23 #define CONFIG_ADDR_MAP 1 24 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 25 #endif 26 27 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 28 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 29 #define CONFIG_FSL_IFC /* Enable IFC Support */ 30 31 #define CONFIG_FSL_LAW /* Use common FSL init code */ 32 #define CONFIG_ENV_OVERWRITE 33 34 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 35 36 /* support deep sleep */ 37 #ifdef CONFIG_PPC_T1024 38 #define CONFIG_DEEP_SLEEP 39 #endif 40 #if defined(CONFIG_DEEP_SLEEP) 41 #define CONFIG_BOARD_EARLY_INIT_F 42 #endif 43 44 #ifdef CONFIG_RAMBOOT_PBL 45 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 46 #define CONFIG_SPL_FLUSH_IMAGE 47 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 48 #define CONFIG_FSL_LAW /* Use common FSL init code */ 49 #define CONFIG_SYS_TEXT_BASE 0x30001000 50 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 51 #define CONFIG_SPL_PAD_TO 0x40000 52 #define CONFIG_SPL_MAX_SIZE 0x28000 53 #define RESET_VECTOR_OFFSET 0x27FFC 54 #define BOOT_PAGE_OFFSET 0x27000 55 #ifdef CONFIG_SPL_BUILD 56 #define CONFIG_SPL_SKIP_RELOCATE 57 #define CONFIG_SPL_COMMON_INIT_DDR 58 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 59 #define CONFIG_SYS_NO_FLASH 60 #endif 61 62 #ifdef CONFIG_NAND 63 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 64 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 65 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 66 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 67 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 68 #if defined(CONFIG_T1024RDB) 69 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg 70 #elif defined(CONFIG_T1023RDB) 71 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg 72 #endif 73 #define CONFIG_SPL_NAND_BOOT 74 #endif 75 76 #ifdef CONFIG_SPIFLASH 77 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 78 #define CONFIG_SPL_SPI_FLASH_MINIMAL 79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 81 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 82 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 83 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 84 #ifndef CONFIG_SPL_BUILD 85 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 86 #endif 87 #if defined(CONFIG_T1024RDB) 88 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg 89 #elif defined(CONFIG_T1023RDB) 90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg 91 #endif 92 #define CONFIG_SPL_SPI_BOOT 93 #endif 94 95 #ifdef CONFIG_SDCARD 96 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 97 #define CONFIG_SPL_MMC_MINIMAL 98 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 99 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 100 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 101 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 102 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 103 #ifndef CONFIG_SPL_BUILD 104 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 105 #endif 106 #if defined(CONFIG_T1024RDB) 107 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg 108 #elif defined(CONFIG_T1023RDB) 109 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg 110 #endif 111 #define CONFIG_SPL_MMC_BOOT 112 #endif 113 114 #endif /* CONFIG_RAMBOOT_PBL */ 115 116 #ifndef CONFIG_SYS_TEXT_BASE 117 #define CONFIG_SYS_TEXT_BASE 0xeff40000 118 #endif 119 120 #ifndef CONFIG_RESET_VECTOR_ADDRESS 121 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 122 #endif 123 124 #ifndef CONFIG_SYS_NO_FLASH 125 #define CONFIG_FLASH_CFI_DRIVER 126 #define CONFIG_SYS_FLASH_CFI 127 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 128 #endif 129 130 /* PCIe Boot - Master */ 131 #define CONFIG_SRIO_PCIE_BOOT_MASTER 132 /* 133 * for slave u-boot IMAGE instored in master memory space, 134 * PHYS must be aligned based on the SIZE 135 */ 136 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 138 #ifdef CONFIG_PHYS_64BIT 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 140 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 141 #else 142 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 143 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 144 #endif 145 /* 146 * for slave UCODE and ENV instored in master memory space, 147 * PHYS must be aligned based on the SIZE 148 */ 149 #ifdef CONFIG_PHYS_64BIT 150 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 152 #else 153 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 154 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 155 #endif 156 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 157 /* slave core release by master*/ 158 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 159 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 160 161 /* PCIe Boot - Slave */ 162 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 164 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 165 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 166 /* Set 1M boot space for PCIe boot */ 167 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 168 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 169 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 170 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 171 #define CONFIG_SYS_NO_FLASH 172 #endif 173 174 #if defined(CONFIG_SPIFLASH) 175 #define CONFIG_SYS_EXTRA_ENV_RELOC 176 #define CONFIG_ENV_IS_IN_SPI_FLASH 177 #define CONFIG_ENV_SPI_BUS 0 178 #define CONFIG_ENV_SPI_CS 0 179 #define CONFIG_ENV_SPI_MAX_HZ 10000000 180 #define CONFIG_ENV_SPI_MODE 0 181 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 182 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 183 #if defined(CONFIG_T1024RDB) 184 #define CONFIG_ENV_SECT_SIZE 0x10000 185 #elif defined(CONFIG_T1023RDB) 186 #define CONFIG_ENV_SECT_SIZE 0x40000 187 #endif 188 #elif defined(CONFIG_SDCARD) 189 #define CONFIG_SYS_EXTRA_ENV_RELOC 190 #define CONFIG_ENV_IS_IN_MMC 191 #define CONFIG_SYS_MMC_ENV_DEV 0 192 #define CONFIG_ENV_SIZE 0x2000 193 #define CONFIG_ENV_OFFSET (512 * 0x800) 194 #elif defined(CONFIG_NAND) 195 #define CONFIG_SYS_EXTRA_ENV_RELOC 196 #define CONFIG_ENV_IS_IN_NAND 197 #define CONFIG_ENV_SIZE 0x2000 198 #if defined(CONFIG_T1024RDB) 199 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 200 #elif defined(CONFIG_T1023RDB) 201 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 202 #endif 203 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 204 #define CONFIG_ENV_IS_IN_REMOTE 205 #define CONFIG_ENV_ADDR 0xffe20000 206 #define CONFIG_ENV_SIZE 0x2000 207 #elif defined(CONFIG_ENV_IS_NOWHERE) 208 #define CONFIG_ENV_SIZE 0x2000 209 #else 210 #define CONFIG_ENV_IS_IN_FLASH 211 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 212 #define CONFIG_ENV_SIZE 0x2000 213 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 214 #endif 215 216 #ifndef __ASSEMBLY__ 217 unsigned long get_board_sys_clk(void); 218 unsigned long get_board_ddr_clk(void); 219 #endif 220 221 #define CONFIG_SYS_CLK_FREQ 100000000 222 #define CONFIG_DDR_CLK_FREQ 100000000 223 224 /* 225 * These can be toggled for performance analysis, otherwise use default. 226 */ 227 #define CONFIG_SYS_CACHE_STASHING 228 #define CONFIG_BACKSIDE_L2_CACHE 229 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 230 #define CONFIG_BTB /* toggle branch predition */ 231 #define CONFIG_DDR_ECC 232 #ifdef CONFIG_DDR_ECC 233 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 234 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 235 #endif 236 237 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 238 #define CONFIG_SYS_MEMTEST_END 0x00400000 239 #define CONFIG_SYS_ALT_MEMTEST 240 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 241 242 /* 243 * Config the L3 Cache as L3 SRAM 244 */ 245 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 246 #define CONFIG_SYS_L3_SIZE (256 << 10) 247 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 248 #ifdef CONFIG_RAMBOOT_PBL 249 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 250 #endif 251 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 252 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 253 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 254 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 255 256 #ifdef CONFIG_PHYS_64BIT 257 #define CONFIG_SYS_DCSRBAR 0xf0000000 258 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 259 #endif 260 261 /* EEPROM */ 262 #define CONFIG_ID_EEPROM 263 #define CONFIG_SYS_I2C_EEPROM_NXID 264 #define CONFIG_SYS_EEPROM_BUS_NUM 0 265 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 266 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 267 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 268 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 269 270 /* 271 * DDR Setup 272 */ 273 #define CONFIG_VERY_BIG_RAM 274 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 275 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 276 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 277 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 278 #define CONFIG_FSL_DDR_INTERACTIVE 279 #if defined(CONFIG_T1024RDB) 280 #define CONFIG_DDR_SPD 281 #define CONFIG_SYS_FSL_DDR3 282 #define CONFIG_SYS_SPD_BUS_NUM 0 283 #define SPD_EEPROM_ADDRESS 0x51 284 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 285 #elif defined(CONFIG_T1023RDB) 286 #define CONFIG_SYS_FSL_DDR4 287 #define CONFIG_SYS_DDR_RAW_TIMING 288 #define CONFIG_SYS_SDRAM_SIZE 2048 289 #endif 290 291 /* 292 * IFC Definitions 293 */ 294 #define CONFIG_SYS_FLASH_BASE 0xe8000000 295 #ifdef CONFIG_PHYS_64BIT 296 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 297 #else 298 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 299 #endif 300 301 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 302 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 303 CSPR_PORT_SIZE_16 | \ 304 CSPR_MSEL_NOR | \ 305 CSPR_V) 306 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 307 308 /* NOR Flash Timing Params */ 309 #if defined(CONFIG_T1024RDB) 310 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 311 #elif defined(CONFIG_T1023RDB) 312 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ 313 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 314 #endif 315 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 316 FTIM0_NOR_TEADC(0x5) | \ 317 FTIM0_NOR_TEAHC(0x5)) 318 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 319 FTIM1_NOR_TRAD_NOR(0x1A) |\ 320 FTIM1_NOR_TSEQRAD_NOR(0x13)) 321 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 322 FTIM2_NOR_TCH(0x4) | \ 323 FTIM2_NOR_TWPH(0x0E) | \ 324 FTIM2_NOR_TWP(0x1c)) 325 #define CONFIG_SYS_NOR_FTIM3 0x0 326 327 #define CONFIG_SYS_FLASH_QUIET_TEST 328 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 329 330 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 331 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 332 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 333 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 334 335 #define CONFIG_SYS_FLASH_EMPTY_INFO 336 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 337 338 #ifdef CONFIG_T1024RDB 339 /* CPLD on IFC */ 340 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 341 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 342 #define CONFIG_SYS_CSPR2_EXT (0xf) 343 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 344 | CSPR_PORT_SIZE_8 \ 345 | CSPR_MSEL_GPCM \ 346 | CSPR_V) 347 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 348 #define CONFIG_SYS_CSOR2 0x0 349 350 /* CPLD Timing parameters for IFC CS2 */ 351 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 352 FTIM0_GPCM_TEADC(0x0e) | \ 353 FTIM0_GPCM_TEAHC(0x0e)) 354 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 355 FTIM1_GPCM_TRAD(0x1f)) 356 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 357 FTIM2_GPCM_TCH(0x8) | \ 358 FTIM2_GPCM_TWP(0x1f)) 359 #define CONFIG_SYS_CS2_FTIM3 0x0 360 #endif 361 362 /* NAND Flash on IFC */ 363 #define CONFIG_NAND_FSL_IFC 364 #define CONFIG_SYS_NAND_BASE 0xff800000 365 #ifdef CONFIG_PHYS_64BIT 366 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 367 #else 368 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 369 #endif 370 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 371 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 372 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 373 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 374 | CSPR_V) 375 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 376 377 #if defined(CONFIG_T1024RDB) 378 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 379 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 380 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 381 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 382 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 383 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 384 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 385 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 386 #elif defined(CONFIG_T1023RDB) 387 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 388 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 389 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 390 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 391 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 392 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 393 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 394 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 395 #endif 396 397 #define CONFIG_SYS_NAND_ONFI_DETECTION 398 /* ONFI NAND Flash mode0 Timing Params */ 399 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 400 FTIM0_NAND_TWP(0x18) | \ 401 FTIM0_NAND_TWCHT(0x07) | \ 402 FTIM0_NAND_TWH(0x0a)) 403 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 404 FTIM1_NAND_TWBE(0x39) | \ 405 FTIM1_NAND_TRR(0x0e) | \ 406 FTIM1_NAND_TRP(0x18)) 407 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 408 FTIM2_NAND_TREH(0x0a) | \ 409 FTIM2_NAND_TWHRE(0x1e)) 410 #define CONFIG_SYS_NAND_FTIM3 0x0 411 412 #define CONFIG_SYS_NAND_DDR_LAW 11 413 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 414 #define CONFIG_SYS_MAX_NAND_DEVICE 1 415 #define CONFIG_CMD_NAND 416 417 #if defined(CONFIG_NAND) 418 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 419 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 420 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 421 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 422 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 423 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 424 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 425 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 426 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 427 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 428 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 429 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 430 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 431 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 432 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 433 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 434 #else 435 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 436 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 437 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 438 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 439 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 440 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 441 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 442 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 443 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 444 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 445 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 446 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 447 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 448 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 449 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 450 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 451 #endif 452 453 #ifdef CONFIG_SPL_BUILD 454 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 455 #else 456 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 457 #endif 458 459 #if defined(CONFIG_RAMBOOT_PBL) 460 #define CONFIG_SYS_RAMBOOT 461 #endif 462 463 #define CONFIG_BOARD_EARLY_INIT_R 464 #define CONFIG_MISC_INIT_R 465 466 #define CONFIG_HWCONFIG 467 468 /* define to use L1 as initial stack */ 469 #define CONFIG_L1_INIT_RAM 470 #define CONFIG_SYS_INIT_RAM_LOCK 471 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 472 #ifdef CONFIG_PHYS_64BIT 473 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 474 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 475 /* The assembler doesn't like typecast */ 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 477 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 478 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 479 #else 480 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 481 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 482 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 483 #endif 484 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 485 486 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 487 GENERATED_GBL_DATA_SIZE) 488 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 489 490 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 491 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 492 493 /* Serial Port */ 494 #define CONFIG_CONS_INDEX 1 495 #define CONFIG_SYS_NS16550_SERIAL 496 #define CONFIG_SYS_NS16550_REG_SIZE 1 497 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 498 499 #define CONFIG_SYS_BAUDRATE_TABLE \ 500 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 501 502 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 503 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 504 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 505 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 506 507 /* Video */ 508 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 509 #ifdef CONFIG_FSL_DIU_FB 510 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 511 #define CONFIG_CMD_BMP 512 #define CONFIG_VIDEO_LOGO 513 #define CONFIG_VIDEO_BMP_LOGO 514 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 515 /* 516 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 517 * disable empty flash sector detection, which is I/O-intensive. 518 */ 519 #undef CONFIG_SYS_FLASH_EMPTY_INFO 520 #endif 521 522 /* I2C */ 523 #define CONFIG_SYS_I2C 524 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 525 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 526 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 527 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 528 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 529 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 530 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 531 532 #define I2C_PCA6408_BUS_NUM 1 533 #define I2C_PCA6408_ADDR 0x20 534 535 /* I2C bus multiplexer */ 536 #define I2C_MUX_CH_DEFAULT 0x8 537 538 /* 539 * RTC configuration 540 */ 541 #define RTC 542 #define CONFIG_RTC_DS1337 1 543 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 544 545 /* 546 * eSPI - Enhanced SPI 547 */ 548 #define CONFIG_SPI_FLASH_BAR 549 #define CONFIG_SF_DEFAULT_SPEED 10000000 550 #define CONFIG_SF_DEFAULT_MODE 0 551 552 /* 553 * General PCIe 554 * Memory space is mapped 1-1, but I/O space must start from 0. 555 */ 556 #define CONFIG_PCI /* Enable PCI/PCIE */ 557 #define CONFIG_PCIE1 /* PCIE controller 1 */ 558 #define CONFIG_PCIE2 /* PCIE controller 2 */ 559 #define CONFIG_PCIE3 /* PCIE controller 3 */ 560 #ifdef CONFIG_PPC_T1040 561 #define CONFIG_PCIE4 /* PCIE controller 4 */ 562 #endif 563 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 564 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 565 #define CONFIG_PCI_INDIRECT_BRIDGE 566 567 #ifdef CONFIG_PCI 568 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 569 #ifdef CONFIG_PCIE1 570 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 571 #ifdef CONFIG_PHYS_64BIT 572 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 573 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 574 #else 575 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 576 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 577 #endif 578 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 579 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 580 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 581 #ifdef CONFIG_PHYS_64BIT 582 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 583 #else 584 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 585 #endif 586 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 587 #endif 588 589 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 590 #ifdef CONFIG_PCIE2 591 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 592 #ifdef CONFIG_PHYS_64BIT 593 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 594 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 595 #else 596 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 597 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 598 #endif 599 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 600 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 601 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 602 #ifdef CONFIG_PHYS_64BIT 603 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 604 #else 605 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 606 #endif 607 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 608 #endif 609 610 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 611 #ifdef CONFIG_PCIE3 612 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 613 #ifdef CONFIG_PHYS_64BIT 614 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 615 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 616 #else 617 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 618 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 619 #endif 620 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 621 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 622 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 623 #ifdef CONFIG_PHYS_64BIT 624 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 625 #else 626 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 627 #endif 628 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 629 #endif 630 631 /* controller 4, Base address 203000, to be removed */ 632 #ifdef CONFIG_PCIE4 633 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 634 #ifdef CONFIG_PHYS_64BIT 635 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 636 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 637 #else 638 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 639 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 640 #endif 641 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 642 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 643 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 644 #ifdef CONFIG_PHYS_64BIT 645 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 646 #else 647 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 648 #endif 649 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 650 #endif 651 652 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 653 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 654 #define CONFIG_DOS_PARTITION 655 #endif /* CONFIG_PCI */ 656 657 /* 658 * USB 659 */ 660 #define CONFIG_HAS_FSL_DR_USB 661 662 #ifdef CONFIG_HAS_FSL_DR_USB 663 #define CONFIG_USB_EHCI 664 #define CONFIG_USB_EHCI_FSL 665 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 666 #endif 667 668 /* 669 * SDHC 670 */ 671 #define CONFIG_MMC 672 #ifdef CONFIG_MMC 673 #define CONFIG_FSL_ESDHC 674 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 675 #define CONFIG_GENERIC_MMC 676 #define CONFIG_DOS_PARTITION 677 #endif 678 679 /* Qman/Bman */ 680 #ifndef CONFIG_NOBQFMAN 681 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 682 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 683 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 684 #ifdef CONFIG_PHYS_64BIT 685 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 686 #else 687 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 688 #endif 689 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 690 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 691 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 692 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 693 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 694 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 695 CONFIG_SYS_BMAN_CENA_SIZE) 696 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 697 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 698 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 699 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 700 #ifdef CONFIG_PHYS_64BIT 701 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 702 #else 703 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 704 #endif 705 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 706 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 707 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 708 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 709 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 710 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 711 CONFIG_SYS_QMAN_CENA_SIZE) 712 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 713 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 714 715 #define CONFIG_SYS_DPAA_FMAN 716 717 #ifdef CONFIG_T1024RDB 718 #define CONFIG_QE 719 #define CONFIG_U_QE 720 #endif 721 /* Default address of microcode for the Linux FMan driver */ 722 #if defined(CONFIG_SPIFLASH) 723 /* 724 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 725 * env, so we got 0x110000. 726 */ 727 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 728 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 729 #define CONFIG_SYS_QE_FW_ADDR 0x130000 730 #elif defined(CONFIG_SDCARD) 731 /* 732 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 733 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 734 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 735 */ 736 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 737 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 738 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 739 #elif defined(CONFIG_NAND) 740 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 741 #if defined(CONFIG_T1024RDB) 742 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 743 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 744 #elif defined(CONFIG_T1023RDB) 745 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 746 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 747 #endif 748 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 749 /* 750 * Slave has no ucode locally, it can fetch this from remote. When implementing 751 * in two corenet boards, slave's ucode could be stored in master's memory 752 * space, the address can be mapped from slave TLB->slave LAW-> 753 * slave SRIO or PCIE outbound window->master inbound window-> 754 * master LAW->the ucode address in master's memory space. 755 */ 756 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 757 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 758 #else 759 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 760 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 761 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 762 #endif 763 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 764 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 765 #endif /* CONFIG_NOBQFMAN */ 766 767 #ifdef CONFIG_SYS_DPAA_FMAN 768 #define CONFIG_FMAN_ENET 769 #define CONFIG_PHYLIB_10G 770 #define CONFIG_PHY_REALTEK 771 #define CONFIG_PHY_AQUANTIA 772 #if defined(CONFIG_T1024RDB) 773 #define RGMII_PHY1_ADDR 0x2 774 #define RGMII_PHY2_ADDR 0x6 775 #define SGMII_AQR_PHY_ADDR 0x2 776 #define FM1_10GEC1_PHY_ADDR 0x1 777 #elif defined(CONFIG_T1023RDB) 778 #define RGMII_PHY1_ADDR 0x1 779 #define SGMII_RTK_PHY_ADDR 0x3 780 #define SGMII_AQR_PHY_ADDR 0x2 781 #endif 782 #endif 783 784 #ifdef CONFIG_FMAN_ENET 785 #define CONFIG_MII /* MII PHY management */ 786 #define CONFIG_ETHPRIME "FM1@DTSEC4" 787 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 788 #endif 789 790 /* 791 * Dynamic MTD Partition support with mtdparts 792 */ 793 #ifndef CONFIG_SYS_NO_FLASH 794 #define CONFIG_MTD_DEVICE 795 #define CONFIG_MTD_PARTITIONS 796 #define CONFIG_CMD_MTDPARTS 797 #define CONFIG_FLASH_CFI_MTD 798 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 799 "spi0=spife110000.1" 800 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 801 "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ 802 "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ 803 "1m(uboot),5m(kernel),128k(dtb),-(user)" 804 #endif 805 806 /* 807 * Environment 808 */ 809 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 810 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 811 812 /* 813 * Command line configuration. 814 */ 815 #define CONFIG_CMD_DATE 816 #define CONFIG_CMD_EEPROM 817 #define CONFIG_CMD_ERRATA 818 #define CONFIG_CMD_IRQ 819 #define CONFIG_CMD_REGINFO 820 821 #ifdef CONFIG_PCI 822 #define CONFIG_CMD_PCI 823 #endif 824 825 /* 826 * Miscellaneous configurable options 827 */ 828 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 829 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 830 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 831 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 832 #ifdef CONFIG_CMD_KGDB 833 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 834 #else 835 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 836 #endif 837 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 838 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 839 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 840 841 /* 842 * For booting Linux, the board info and command line data 843 * have to be in the first 64 MB of memory, since this is 844 * the maximum mapped by the Linux kernel during initialization. 845 */ 846 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 847 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 848 849 #ifdef CONFIG_CMD_KGDB 850 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 851 #endif 852 853 /* 854 * Environment Configuration 855 */ 856 #define CONFIG_ROOTPATH "/opt/nfsroot" 857 #define CONFIG_BOOTFILE "uImage" 858 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 859 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 860 #define CONFIG_BAUDRATE 115200 861 #define __USB_PHY_TYPE utmi 862 863 #ifdef CONFIG_PPC_T1024 864 #define CONFIG_BOARDNAME t1024rdb 865 #define BANK_INTLV cs0_cs1 866 #else 867 #define CONFIG_BOARDNAME t1023rdb 868 #define BANK_INTLV null 869 #endif 870 871 #define CONFIG_EXTRA_ENV_SETTINGS \ 872 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 873 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 874 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 875 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 876 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 877 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 878 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 879 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 880 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 881 "netdev=eth0\0" \ 882 "tftpflash=tftpboot $loadaddr $uboot && " \ 883 "protect off $ubootaddr +$filesize && " \ 884 "erase $ubootaddr +$filesize && " \ 885 "cp.b $loadaddr $ubootaddr $filesize && " \ 886 "protect on $ubootaddr +$filesize && " \ 887 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 888 "consoledev=ttyS0\0" \ 889 "ramdiskaddr=2000000\0" \ 890 "fdtaddr=1e00000\0" \ 891 "bdev=sda3\0" 892 893 #define CONFIG_LINUX \ 894 "setenv bootargs root=/dev/ram rw " \ 895 "console=$consoledev,$baudrate $othbootargs;" \ 896 "setenv ramdiskaddr 0x02000000;" \ 897 "setenv fdtaddr 0x00c00000;" \ 898 "setenv loadaddr 0x1000000;" \ 899 "bootm $loadaddr $ramdiskaddr $fdtaddr" 900 901 #define CONFIG_NFSBOOTCOMMAND \ 902 "setenv bootargs root=/dev/nfs rw " \ 903 "nfsroot=$serverip:$rootpath " \ 904 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 905 "console=$consoledev,$baudrate $othbootargs;" \ 906 "tftp $loadaddr $bootfile;" \ 907 "tftp $fdtaddr $fdtfile;" \ 908 "bootm $loadaddr - $fdtaddr" 909 910 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 911 912 /* Hash command with SHA acceleration supported in hardware */ 913 #ifdef CONFIG_FSL_CAAM 914 #define CONFIG_CMD_HASH 915 #define CONFIG_SHA_HW_ACCEL 916 #endif 917 918 #include <asm/fsl_secure_boot.h> 919 920 #endif /* __T1024RDB_H */ 921