1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 QDS board configuration file 9 */ 10 11 #ifndef __T1024QDS_H 12 #define __T1024QDS_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_DISPLAY_BOARDINFO 16 #define CONFIG_BOOKE 17 #define CONFIG_E500 /* BOOKE e500 family */ 18 #define CONFIG_E500MC /* BOOKE e500mc family */ 19 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 20 #define CONFIG_MP /* support multiple processors */ 21 #define CONFIG_PHYS_64BIT 22 #define CONFIG_ENABLE_36BIT_PHYS 23 24 #ifdef CONFIG_PHYS_64BIT 25 #define CONFIG_ADDR_MAP 1 26 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 27 #endif 28 29 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 30 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 31 #define CONFIG_FSL_IFC /* Enable IFC Support */ 32 33 #define CONFIG_FSL_LAW /* Use common FSL init code */ 34 #define CONFIG_ENV_OVERWRITE 35 36 #define CONFIG_DEEP_SLEEP 37 #if defined(CONFIG_DEEP_SLEEP) 38 #define CONFIG_SILENT_CONSOLE 39 #define CONFIG_BOARD_EARLY_INIT_F 40 #endif 41 42 #ifdef CONFIG_RAMBOOT_PBL 43 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg 44 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg 45 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 46 #define CONFIG_SPL_ENV_SUPPORT 47 #define CONFIG_SPL_SERIAL_SUPPORT 48 #define CONFIG_SPL_FLUSH_IMAGE 49 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 50 #define CONFIG_SPL_LIBGENERIC_SUPPORT 51 #define CONFIG_SPL_LIBCOMMON_SUPPORT 52 #define CONFIG_SPL_I2C_SUPPORT 53 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 54 #define CONFIG_FSL_LAW /* Use common FSL init code */ 55 #define CONFIG_SYS_TEXT_BASE 0x00201000 56 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 57 #define CONFIG_SPL_PAD_TO 0x40000 58 #define CONFIG_SPL_MAX_SIZE 0x28000 59 #define RESET_VECTOR_OFFSET 0x27FFC 60 #define BOOT_PAGE_OFFSET 0x27000 61 #ifdef CONFIG_SPL_BUILD 62 #define CONFIG_SPL_SKIP_RELOCATE 63 #define CONFIG_SPL_COMMON_INIT_DDR 64 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 65 #define CONFIG_SYS_NO_FLASH 66 #endif 67 68 #ifdef CONFIG_NAND 69 #define CONFIG_SPL_NAND_SUPPORT 70 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 71 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 72 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 73 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 74 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 75 #define CONFIG_SPL_NAND_BOOT 76 #endif 77 78 #ifdef CONFIG_SPIFLASH 79 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 80 #define CONFIG_SPL_SPI_SUPPORT 81 #define CONFIG_SPL_SPI_FLASH_SUPPORT 82 #define CONFIG_SPL_SPI_FLASH_MINIMAL 83 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 87 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 88 #ifndef CONFIG_SPL_BUILD 89 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 90 #endif 91 #define CONFIG_SPL_SPI_BOOT 92 #endif 93 94 #ifdef CONFIG_SDCARD 95 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 96 #define CONFIG_SPL_MMC_SUPPORT 97 #define CONFIG_SPL_MMC_MINIMAL 98 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 99 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 100 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 101 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 102 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 103 #ifndef CONFIG_SPL_BUILD 104 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 105 #endif 106 #define CONFIG_SPL_MMC_BOOT 107 #endif 108 109 #endif /* CONFIG_RAMBOOT_PBL */ 110 111 #ifndef CONFIG_SYS_TEXT_BASE 112 #define CONFIG_SYS_TEXT_BASE 0xeff40000 113 #endif 114 115 #ifndef CONFIG_RESET_VECTOR_ADDRESS 116 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 117 #endif 118 119 #ifndef CONFIG_SYS_NO_FLASH 120 #define CONFIG_FLASH_CFI_DRIVER 121 #define CONFIG_SYS_FLASH_CFI 122 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 123 #endif 124 125 /* PCIe Boot - Master */ 126 #define CONFIG_SRIO_PCIE_BOOT_MASTER 127 /* 128 * for slave u-boot IMAGE instored in master memory space, 129 * PHYS must be aligned based on the SIZE 130 */ 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 133 #ifdef CONFIG_PHYS_64BIT 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 136 #else 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 139 #endif 140 /* 141 * for slave UCODE and ENV instored in master memory space, 142 * PHYS must be aligned based on the SIZE 143 */ 144 #ifdef CONFIG_PHYS_64BIT 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 147 #else 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 150 #endif 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 152 /* slave core release by master*/ 153 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 154 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 155 156 /* PCIe Boot - Slave */ 157 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 158 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 160 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 161 /* Set 1M boot space for PCIe boot */ 162 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 164 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 165 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 166 #define CONFIG_SYS_NO_FLASH 167 #endif 168 169 #if defined(CONFIG_SPIFLASH) 170 #define CONFIG_SYS_EXTRA_ENV_RELOC 171 #define CONFIG_ENV_IS_IN_SPI_FLASH 172 #define CONFIG_ENV_SPI_BUS 0 173 #define CONFIG_ENV_SPI_CS 0 174 #define CONFIG_ENV_SPI_MAX_HZ 10000000 175 #define CONFIG_ENV_SPI_MODE 0 176 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 177 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 178 #define CONFIG_ENV_SECT_SIZE 0x10000 179 #elif defined(CONFIG_SDCARD) 180 #define CONFIG_SYS_EXTRA_ENV_RELOC 181 #define CONFIG_ENV_IS_IN_MMC 182 #define CONFIG_SYS_MMC_ENV_DEV 0 183 #define CONFIG_ENV_SIZE 0x2000 184 #define CONFIG_ENV_OFFSET (512 * 0x800) 185 #elif defined(CONFIG_NAND) 186 #define CONFIG_SYS_EXTRA_ENV_RELOC 187 #define CONFIG_ENV_IS_IN_NAND 188 #define CONFIG_ENV_SIZE 0x2000 189 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 190 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 191 #define CONFIG_ENV_IS_IN_REMOTE 192 #define CONFIG_ENV_ADDR 0xffe20000 193 #define CONFIG_ENV_SIZE 0x2000 194 #elif defined(CONFIG_ENV_IS_NOWHERE) 195 #define CONFIG_ENV_SIZE 0x2000 196 #else 197 #define CONFIG_ENV_IS_IN_FLASH 198 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 199 #define CONFIG_ENV_SIZE 0x2000 200 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 201 #endif 202 203 204 #ifndef __ASSEMBLY__ 205 unsigned long get_board_sys_clk(void); 206 unsigned long get_board_ddr_clk(void); 207 #endif 208 209 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 210 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 211 212 /* 213 * These can be toggled for performance analysis, otherwise use default. 214 */ 215 #define CONFIG_SYS_CACHE_STASHING 216 #define CONFIG_BACKSIDE_L2_CACHE 217 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 218 #define CONFIG_BTB /* toggle branch predition */ 219 #define CONFIG_DDR_ECC 220 #ifdef CONFIG_DDR_ECC 221 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 222 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 223 #endif 224 225 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 226 #define CONFIG_SYS_MEMTEST_END 0x00400000 227 #define CONFIG_SYS_ALT_MEMTEST 228 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 229 230 /* 231 * Config the L3 Cache as L3 SRAM 232 */ 233 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 234 #define CONFIG_SYS_L3_SIZE (256 << 10) 235 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 236 #ifdef CONFIG_RAMBOOT_PBL 237 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 238 #endif 239 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 240 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 241 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 242 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 243 244 #ifdef CONFIG_PHYS_64BIT 245 #define CONFIG_SYS_DCSRBAR 0xf0000000 246 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 247 #endif 248 249 /* EEPROM */ 250 #define CONFIG_ID_EEPROM 251 #define CONFIG_SYS_I2C_EEPROM_NXID 252 #define CONFIG_SYS_EEPROM_BUS_NUM 0 253 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 254 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 255 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 256 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 257 258 /* 259 * DDR Setup 260 */ 261 #define CONFIG_VERY_BIG_RAM 262 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 263 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 264 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 265 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 266 #define CONFIG_DDR_SPD 267 #ifndef CONFIG_SYS_FSL_DDR4 268 #define CONFIG_SYS_FSL_DDR3 269 #endif 270 271 #define CONFIG_SYS_SPD_BUS_NUM 0 272 #define SPD_EEPROM_ADDRESS 0x51 273 274 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 275 276 /* 277 * IFC Definitions 278 */ 279 #define CONFIG_SYS_FLASH_BASE 0xe0000000 280 #ifdef CONFIG_PHYS_64BIT 281 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 282 #else 283 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 284 #endif 285 286 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 287 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 288 + 0x8000000) | \ 289 CSPR_PORT_SIZE_16 | \ 290 CSPR_MSEL_NOR | \ 291 CSPR_V) 292 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 293 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 294 CSPR_PORT_SIZE_16 | \ 295 CSPR_MSEL_NOR | \ 296 CSPR_V) 297 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 298 /* NOR Flash Timing Params */ 299 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 300 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 301 FTIM0_NOR_TEADC(0x5) | \ 302 FTIM0_NOR_TEAHC(0x5)) 303 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 304 FTIM1_NOR_TRAD_NOR(0x1A) |\ 305 FTIM1_NOR_TSEQRAD_NOR(0x13)) 306 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 307 FTIM2_NOR_TCH(0x4) | \ 308 FTIM2_NOR_TWPH(0x0E) | \ 309 FTIM2_NOR_TWP(0x1c)) 310 #define CONFIG_SYS_NOR_FTIM3 0x0 311 312 #define CONFIG_SYS_FLASH_QUIET_TEST 313 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 314 315 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 316 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 317 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 318 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 319 320 #define CONFIG_SYS_FLASH_EMPTY_INFO 321 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 322 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 323 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 324 #define QIXIS_BASE 0xffdf0000 325 #ifdef CONFIG_PHYS_64BIT 326 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 327 #else 328 #define QIXIS_BASE_PHYS QIXIS_BASE 329 #endif 330 #define QIXIS_LBMAP_SWITCH 0x06 331 #define QIXIS_LBMAP_MASK 0x0f 332 #define QIXIS_LBMAP_SHIFT 0 333 #define QIXIS_LBMAP_DFLTBANK 0x00 334 #define QIXIS_LBMAP_ALTBANK 0x04 335 #define QIXIS_RST_CTL_RESET 0x31 336 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 337 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 338 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 339 #define QIXIS_RST_FORCE_MEM 0x01 340 341 #define CONFIG_SYS_CSPR3_EXT (0xf) 342 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 343 | CSPR_PORT_SIZE_8 \ 344 | CSPR_MSEL_GPCM \ 345 | CSPR_V) 346 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 347 #define CONFIG_SYS_CSOR3 0x0 348 /* QIXIS Timing parameters for IFC CS3 */ 349 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 350 FTIM0_GPCM_TEADC(0x0e) | \ 351 FTIM0_GPCM_TEAHC(0x0e)) 352 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 353 FTIM1_GPCM_TRAD(0x3f)) 354 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 355 FTIM2_GPCM_TCH(0x8) | \ 356 FTIM2_GPCM_TWP(0x1f)) 357 #define CONFIG_SYS_CS3_FTIM3 0x0 358 359 #define CONFIG_NAND_FSL_IFC 360 #define CONFIG_SYS_NAND_BASE 0xff800000 361 #ifdef CONFIG_PHYS_64BIT 362 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 363 #else 364 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 365 #endif 366 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 367 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 368 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 369 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 370 | CSPR_V) 371 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 372 373 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 374 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 375 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 376 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 377 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 378 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 379 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 380 381 #define CONFIG_SYS_NAND_ONFI_DETECTION 382 383 /* ONFI NAND Flash mode0 Timing Params */ 384 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 385 FTIM0_NAND_TWP(0x18) | \ 386 FTIM0_NAND_TWCHT(0x07) | \ 387 FTIM0_NAND_TWH(0x0a)) 388 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 389 FTIM1_NAND_TWBE(0x39) | \ 390 FTIM1_NAND_TRR(0x0e) | \ 391 FTIM1_NAND_TRP(0x18)) 392 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 393 FTIM2_NAND_TREH(0x0a) | \ 394 FTIM2_NAND_TWHRE(0x1e)) 395 #define CONFIG_SYS_NAND_FTIM3 0x0 396 397 #define CONFIG_SYS_NAND_DDR_LAW 11 398 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 399 #define CONFIG_SYS_MAX_NAND_DEVICE 1 400 #define CONFIG_CMD_NAND 401 402 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 403 404 #if defined(CONFIG_NAND) 405 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 406 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 407 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 408 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 409 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 410 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 411 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 412 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 413 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 414 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 415 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 416 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 417 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 418 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 419 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 420 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 421 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 422 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 423 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 424 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 425 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 426 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 427 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 428 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 429 #else 430 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 431 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 432 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 433 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 434 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 435 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 436 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 437 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 438 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 439 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 440 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 441 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 442 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 443 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 444 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 445 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 446 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 447 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 448 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 449 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 450 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 451 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 452 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 453 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 454 #endif 455 456 #ifdef CONFIG_SPL_BUILD 457 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 458 #else 459 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 460 #endif 461 462 #if defined(CONFIG_RAMBOOT_PBL) 463 #define CONFIG_SYS_RAMBOOT 464 #endif 465 466 #define CONFIG_BOARD_EARLY_INIT_R 467 #define CONFIG_MISC_INIT_R 468 469 #define CONFIG_HWCONFIG 470 471 /* define to use L1 as initial stack */ 472 #define CONFIG_L1_INIT_RAM 473 #define CONFIG_SYS_INIT_RAM_LOCK 474 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 475 #ifdef CONFIG_PHYS_64BIT 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 478 /* The assembler doesn't like typecast */ 479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 480 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 481 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 482 #else 483 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 486 #endif 487 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 488 489 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 490 GENERATED_GBL_DATA_SIZE) 491 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 492 493 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 494 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 495 496 /* Serial Port */ 497 #define CONFIG_CONS_INDEX 1 498 #define CONFIG_SYS_NS16550 499 #define CONFIG_SYS_NS16550_SERIAL 500 #define CONFIG_SYS_NS16550_REG_SIZE 1 501 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 502 503 #define CONFIG_SYS_BAUDRATE_TABLE \ 504 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 505 506 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 507 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 508 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 509 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 510 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 511 512 /* Use the HUSH parser */ 513 #define CONFIG_SYS_HUSH_PARSER 514 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 515 516 /* Video */ 517 #ifdef CONFIG_PPC_T1024 /* no DIU on T1023 */ 518 #define CONFIG_FSL_DIU_FB 519 #ifdef CONFIG_FSL_DIU_FB 520 #define CONFIG_FSL_DIU_CH7301 521 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 522 #define CONFIG_VIDEO 523 #define CONFIG_CMD_BMP 524 #define CONFIG_CFB_CONSOLE 525 #define CONFIG_VIDEO_SW_CURSOR 526 #define CONFIG_VGA_AS_SINGLE_DEVICE 527 #define CONFIG_VIDEO_LOGO 528 #define CONFIG_VIDEO_BMP_LOGO 529 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 530 /* 531 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 532 * disable empty flash sector detection, which is I/O-intensive. 533 */ 534 #undef CONFIG_SYS_FLASH_EMPTY_INFO 535 #endif 536 #endif 537 538 /* pass open firmware flat tree */ 539 #define CONFIG_OF_LIBFDT 540 #define CONFIG_OF_BOARD_SETUP 541 #define CONFIG_OF_STDOUT_VIA_ALIAS 542 543 /* new uImage format support */ 544 #define CONFIG_FIT 545 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 546 547 /* I2C */ 548 #define CONFIG_SYS_I2C 549 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 550 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 551 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 552 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 553 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 554 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 555 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 556 557 #define I2C_MUX_PCA_ADDR 0x77 558 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 559 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 560 #define I2C_RETIMER_ADDR 0x18 561 562 /* I2C bus multiplexer */ 563 #define I2C_MUX_CH_DEFAULT 0x8 564 #define I2C_MUX_CH_DIU 0xC 565 #define I2C_MUX_CH5 0xD 566 #define I2C_MUX_CH7 0xF 567 568 /* LDI/DVI Encoder for display */ 569 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 570 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 571 572 /* 573 * RTC configuration 574 */ 575 #define RTC 576 #define CONFIG_RTC_DS3231 1 577 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 578 579 /* 580 * eSPI - Enhanced SPI 581 */ 582 #define CONFIG_FSL_ESPI 583 #define CONFIG_SPI_FLASH_STMICRO 584 #ifndef CONFIG_SPL_BUILD 585 #define CONFIG_SPI_FLASH_SST 586 #define CONFIG_SPI_FLASH_EON 587 #endif 588 #define CONFIG_CMD_SF 589 #define CONFIG_SPI_FLASH_BAR 590 #define CONFIG_SF_DEFAULT_SPEED 10000000 591 #define CONFIG_SF_DEFAULT_MODE 0 592 593 /* 594 * General PCIe 595 * Memory space is mapped 1-1, but I/O space must start from 0. 596 */ 597 #define CONFIG_PCI /* Enable PCI/PCIE */ 598 #define CONFIG_PCIE1 /* PCIE controler 1 */ 599 #define CONFIG_PCIE2 /* PCIE controler 2 */ 600 #define CONFIG_PCIE3 /* PCIE controler 3 */ 601 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 602 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 603 #define CONFIG_PCI_INDIRECT_BRIDGE 604 605 #ifdef CONFIG_PCI 606 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 607 #ifdef CONFIG_PCIE1 608 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 609 #ifdef CONFIG_PHYS_64BIT 610 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 611 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 612 #else 613 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 614 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 615 #endif 616 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 617 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 618 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 619 #ifdef CONFIG_PHYS_64BIT 620 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 621 #else 622 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 623 #endif 624 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 625 #endif 626 627 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 628 #ifdef CONFIG_PCIE2 629 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 630 #ifdef CONFIG_PHYS_64BIT 631 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 632 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 633 #else 634 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 635 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 636 #endif 637 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 638 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 639 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 640 #ifdef CONFIG_PHYS_64BIT 641 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 642 #else 643 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 644 #endif 645 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 646 #endif 647 648 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 649 #ifdef CONFIG_PCIE3 650 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 651 #ifdef CONFIG_PHYS_64BIT 652 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 653 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 654 #else 655 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 656 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 657 #endif 658 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 659 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 660 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 661 #ifdef CONFIG_PHYS_64BIT 662 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 663 #else 664 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 665 #endif 666 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 667 #endif 668 669 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 670 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 671 #define CONFIG_DOS_PARTITION 672 #endif /* CONFIG_PCI */ 673 674 /* 675 *SATA 676 */ 677 #define CONFIG_FSL_SATA_V2 678 #ifdef CONFIG_FSL_SATA_V2 679 #define CONFIG_LIBATA 680 #define CONFIG_FSL_SATA 681 #define CONFIG_SYS_SATA_MAX_DEVICE 1 682 #define CONFIG_SATA1 683 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 684 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 685 #define CONFIG_LBA48 686 #define CONFIG_CMD_SATA 687 #define CONFIG_DOS_PARTITION 688 #define CONFIG_CMD_EXT2 689 #endif 690 691 /* 692 * USB 693 */ 694 #define CONFIG_HAS_FSL_DR_USB 695 696 #ifdef CONFIG_HAS_FSL_DR_USB 697 #define CONFIG_USB_EHCI 698 #define CONFIG_CMD_USB 699 #define CONFIG_USB_STORAGE 700 #define CONFIG_USB_EHCI_FSL 701 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 702 #define CONFIG_CMD_EXT2 703 #endif 704 705 /* 706 * SDHC 707 */ 708 #define CONFIG_MMC 709 #ifdef CONFIG_MMC 710 #define CONFIG_FSL_ESDHC 711 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 712 #define CONFIG_CMD_MMC 713 #define CONFIG_GENERIC_MMC 714 #define CONFIG_CMD_EXT2 715 #define CONFIG_CMD_FAT 716 #define CONFIG_DOS_PARTITION 717 #endif 718 719 /* Qman/Bman */ 720 #ifndef CONFIG_NOBQFMAN 721 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 722 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 723 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 724 #ifdef CONFIG_PHYS_64BIT 725 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 726 #else 727 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 728 #endif 729 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 730 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 731 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 732 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 733 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 734 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 735 CONFIG_SYS_BMAN_CENA_SIZE) 736 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 737 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 738 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 739 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 740 #ifdef CONFIG_PHYS_64BIT 741 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 742 #else 743 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 744 #endif 745 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 746 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 747 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 748 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 749 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 750 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 751 CONFIG_SYS_QMAN_CENA_SIZE) 752 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 753 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 754 755 #define CONFIG_SYS_DPAA_FMAN 756 757 #define CONFIG_QE 758 #define CONFIG_U_QE 759 /* Default address of microcode for the Linux FMan driver */ 760 #if defined(CONFIG_SPIFLASH) 761 /* 762 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 763 * env, so we got 0x110000. 764 */ 765 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 766 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 767 #define CONFIG_SYS_QE_FW_ADDR 0x130000 768 #elif defined(CONFIG_SDCARD) 769 /* 770 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 771 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 772 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 773 */ 774 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 775 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 776 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 777 #elif defined(CONFIG_NAND) 778 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 779 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 780 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 781 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 782 /* 783 * Slave has no ucode locally, it can fetch this from remote. When implementing 784 * in two corenet boards, slave's ucode could be stored in master's memory 785 * space, the address can be mapped from slave TLB->slave LAW-> 786 * slave SRIO or PCIE outbound window->master inbound window-> 787 * master LAW->the ucode address in master's memory space. 788 */ 789 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 790 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 791 #else 792 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 793 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 794 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 795 #endif 796 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 797 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 798 #endif /* CONFIG_NOBQFMAN */ 799 800 #ifdef CONFIG_SYS_DPAA_FMAN 801 #define CONFIG_FMAN_ENET 802 #define CONFIG_PHYLIB_10G 803 #define CONFIG_PHY_VITESSE 804 #define CONFIG_PHY_REALTEK 805 #define CONFIG_PHY_TERANETICS 806 #define RGMII_PHY1_ADDR 0x1 807 #define RGMII_PHY2_ADDR 0x2 808 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3 809 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4 810 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5 811 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 812 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 813 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 814 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 815 #endif 816 817 #ifdef CONFIG_FMAN_ENET 818 #define CONFIG_MII /* MII PHY management */ 819 #define CONFIG_ETHPRIME "FM1@DTSEC4" 820 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 821 #endif 822 823 /* 824 * Dynamic MTD Partition support with mtdparts 825 */ 826 #ifndef CONFIG_SYS_NO_FLASH 827 #define CONFIG_MTD_DEVICE 828 #define CONFIG_MTD_PARTITIONS 829 #define CONFIG_CMD_MTDPARTS 830 #define CONFIG_FLASH_CFI_MTD 831 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 832 "spi0=spife110000.0" 833 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 834 "128k(dtb),96m(fs),-(user);"\ 835 "fff800000.flash:2m(uboot),9m(kernel),"\ 836 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 837 "2m(uboot),9m(kernel),128k(dtb),-(user)" 838 #endif 839 840 /* 841 * Environment 842 */ 843 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 844 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 845 846 /* 847 * Command line configuration. 848 */ 849 #define CONFIG_CMD_DATE 850 #define CONFIG_CMD_DHCP 851 #define CONFIG_CMD_EEPROM 852 #define CONFIG_CMD_ERRATA 853 #define CONFIG_CMD_GREPENV 854 #define CONFIG_CMD_IRQ 855 #define CONFIG_CMD_I2C 856 #define CONFIG_CMD_MII 857 #define CONFIG_CMD_PING 858 #define CONFIG_CMD_REGINFO 859 860 #ifdef CONFIG_PCI 861 #define CONFIG_CMD_PCI 862 #endif 863 864 /* 865 * Miscellaneous configurable options 866 */ 867 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 868 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 869 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 870 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 871 #ifdef CONFIG_CMD_KGDB 872 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 873 #else 874 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 875 #endif 876 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 877 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 878 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 879 880 /* 881 * For booting Linux, the board info and command line data 882 * have to be in the first 64 MB of memory, since this is 883 * the maximum mapped by the Linux kernel during initialization. 884 */ 885 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 886 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 887 888 #ifdef CONFIG_CMD_KGDB 889 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 890 #endif 891 892 /* 893 * Environment Configuration 894 */ 895 #define CONFIG_ROOTPATH "/opt/nfsroot" 896 #define CONFIG_BOOTFILE "uImage" 897 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 898 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 899 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 900 #define CONFIG_BAUDRATE 115200 901 #define __USB_PHY_TYPE utmi 902 903 904 #define CONFIG_EXTRA_ENV_SETTINGS \ 905 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ 906 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 907 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 908 "ramdiskfile=t1024qds/ramdisk.uboot\0" \ 909 "fdtfile=t1024qds/t1024qds.dtb\0" \ 910 "netdev=eth0\0" \ 911 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 912 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 913 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 914 "tftpflash=tftpboot $loadaddr $uboot && " \ 915 "protect off $ubootaddr +$filesize && " \ 916 "erase $ubootaddr +$filesize && " \ 917 "cp.b $loadaddr $ubootaddr $filesize && " \ 918 "protect on $ubootaddr +$filesize && " \ 919 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 920 "consoledev=ttyS0\0" \ 921 "ramdiskaddr=2000000\0" \ 922 "fdtaddr=d00000\0" \ 923 "bdev=sda3\0" 924 925 #define CONFIG_LINUX \ 926 "setenv bootargs root=/dev/ram rw " \ 927 "console=$consoledev,$baudrate $othbootargs;" \ 928 "setenv ramdiskaddr 0x02000000;" \ 929 "setenv fdtaddr 0x00c00000;" \ 930 "setenv loadaddr 0x1000000;" \ 931 "bootm $loadaddr $ramdiskaddr $fdtaddr" 932 933 #define CONFIG_NFSBOOTCOMMAND \ 934 "setenv bootargs root=/dev/nfs rw " \ 935 "nfsroot=$serverip:$rootpath " \ 936 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 937 "console=$consoledev,$baudrate $othbootargs;" \ 938 "tftp $loadaddr $bootfile;" \ 939 "tftp $fdtaddr $fdtfile;" \ 940 "bootm $loadaddr - $fdtaddr" 941 942 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 943 944 #ifdef CONFIG_SECURE_BOOT 945 #include <asm/fsl_secure_boot.h> 946 #endif 947 948 #endif /* __T1024QDS_H */ 949