1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 QDS board configuration file 9 */ 10 11 #ifndef __T1024QDS_H 12 #define __T1024QDS_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 16 #define CONFIG_MP /* support multiple processors */ 17 #define CONFIG_ENABLE_36BIT_PHYS 18 19 #ifdef CONFIG_PHYS_64BIT 20 #define CONFIG_ADDR_MAP 1 21 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 22 #endif 23 24 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 25 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 26 27 #define CONFIG_ENV_OVERWRITE 28 29 #define CONFIG_DEEP_SLEEP 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg 33 #define CONFIG_SPL_FLUSH_IMAGE 34 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 35 #define CONFIG_SYS_TEXT_BASE 0x00201000 36 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 37 #define CONFIG_SPL_PAD_TO 0x40000 38 #define CONFIG_SPL_MAX_SIZE 0x28000 39 #define RESET_VECTOR_OFFSET 0x27FFC 40 #define BOOT_PAGE_OFFSET 0x27000 41 #ifdef CONFIG_SPL_BUILD 42 #define CONFIG_SPL_SKIP_RELOCATE 43 #define CONFIG_SPL_COMMON_INIT_DDR 44 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 45 #endif 46 47 #ifdef CONFIG_NAND 48 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 49 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 50 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 51 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 52 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg 54 #define CONFIG_SPL_NAND_BOOT 55 #endif 56 57 #ifdef CONFIG_SPIFLASH 58 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 59 #define CONFIG_SPL_SPI_FLASH_MINIMAL 60 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 61 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 62 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 64 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 65 #ifndef CONFIG_SPL_BUILD 66 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 67 #endif 68 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg 69 #define CONFIG_SPL_SPI_BOOT 70 #endif 71 72 #ifdef CONFIG_SDCARD 73 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 74 #define CONFIG_SPL_MMC_MINIMAL 75 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 76 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 77 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 78 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 79 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 80 #ifndef CONFIG_SPL_BUILD 81 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 82 #endif 83 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg 84 #define CONFIG_SPL_MMC_BOOT 85 #endif 86 87 #endif /* CONFIG_RAMBOOT_PBL */ 88 89 #ifndef CONFIG_SYS_TEXT_BASE 90 #define CONFIG_SYS_TEXT_BASE 0xeff40000 91 #endif 92 93 #ifndef CONFIG_RESET_VECTOR_ADDRESS 94 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 95 #endif 96 97 #ifdef CONFIG_MTD_NOR_FLASH 98 #define CONFIG_FLASH_CFI_DRIVER 99 #define CONFIG_SYS_FLASH_CFI 100 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 101 #endif 102 103 /* PCIe Boot - Master */ 104 #define CONFIG_SRIO_PCIE_BOOT_MASTER 105 /* 106 * for slave u-boot IMAGE instored in master memory space, 107 * PHYS must be aligned based on the SIZE 108 */ 109 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 110 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 111 #ifdef CONFIG_PHYS_64BIT 112 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 113 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 114 #else 115 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 116 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 117 #endif 118 /* 119 * for slave UCODE and ENV instored in master memory space, 120 * PHYS must be aligned based on the SIZE 121 */ 122 #ifdef CONFIG_PHYS_64BIT 123 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 124 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 125 #else 126 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 127 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 128 #endif 129 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 130 /* slave core release by master*/ 131 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 132 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 133 134 /* PCIe Boot - Slave */ 135 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 136 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 137 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 138 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 139 /* Set 1M boot space for PCIe boot */ 140 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 141 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 142 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 143 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 144 #endif 145 146 #if defined(CONFIG_SPIFLASH) 147 #define CONFIG_SYS_EXTRA_ENV_RELOC 148 #define CONFIG_ENV_IS_IN_SPI_FLASH 149 #define CONFIG_ENV_SPI_BUS 0 150 #define CONFIG_ENV_SPI_CS 0 151 #define CONFIG_ENV_SPI_MAX_HZ 10000000 152 #define CONFIG_ENV_SPI_MODE 0 153 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 154 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 155 #define CONFIG_ENV_SECT_SIZE 0x10000 156 #elif defined(CONFIG_SDCARD) 157 #define CONFIG_SYS_EXTRA_ENV_RELOC 158 #define CONFIG_ENV_IS_IN_MMC 159 #define CONFIG_SYS_MMC_ENV_DEV 0 160 #define CONFIG_ENV_SIZE 0x2000 161 #define CONFIG_ENV_OFFSET (512 * 0x800) 162 #elif defined(CONFIG_NAND) 163 #define CONFIG_SYS_EXTRA_ENV_RELOC 164 #define CONFIG_ENV_IS_IN_NAND 165 #define CONFIG_ENV_SIZE 0x2000 166 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 167 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 168 #define CONFIG_ENV_IS_IN_REMOTE 169 #define CONFIG_ENV_ADDR 0xffe20000 170 #define CONFIG_ENV_SIZE 0x2000 171 #elif defined(CONFIG_ENV_IS_NOWHERE) 172 #define CONFIG_ENV_SIZE 0x2000 173 #else 174 #define CONFIG_ENV_IS_IN_FLASH 175 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 176 #define CONFIG_ENV_SIZE 0x2000 177 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 178 #endif 179 180 #ifndef __ASSEMBLY__ 181 unsigned long get_board_sys_clk(void); 182 unsigned long get_board_ddr_clk(void); 183 #endif 184 185 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 186 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 187 188 /* 189 * These can be toggled for performance analysis, otherwise use default. 190 */ 191 #define CONFIG_SYS_CACHE_STASHING 192 #define CONFIG_BACKSIDE_L2_CACHE 193 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 194 #define CONFIG_BTB /* toggle branch predition */ 195 #define CONFIG_DDR_ECC 196 #ifdef CONFIG_DDR_ECC 197 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 198 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 199 #endif 200 201 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 202 #define CONFIG_SYS_MEMTEST_END 0x00400000 203 #define CONFIG_SYS_ALT_MEMTEST 204 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 205 206 /* 207 * Config the L3 Cache as L3 SRAM 208 */ 209 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 210 #define CONFIG_SYS_L3_SIZE (256 << 10) 211 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 212 #ifdef CONFIG_RAMBOOT_PBL 213 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 214 #endif 215 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 216 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 217 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 218 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 219 220 #ifdef CONFIG_PHYS_64BIT 221 #define CONFIG_SYS_DCSRBAR 0xf0000000 222 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 223 #endif 224 225 /* EEPROM */ 226 #define CONFIG_ID_EEPROM 227 #define CONFIG_SYS_I2C_EEPROM_NXID 228 #define CONFIG_SYS_EEPROM_BUS_NUM 0 229 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 230 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 231 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 232 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 233 234 /* 235 * DDR Setup 236 */ 237 #define CONFIG_VERY_BIG_RAM 238 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 239 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 240 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 241 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 242 #define CONFIG_DDR_SPD 243 244 #define CONFIG_SYS_SPD_BUS_NUM 0 245 #define SPD_EEPROM_ADDRESS 0x51 246 247 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 248 249 /* 250 * IFC Definitions 251 */ 252 #define CONFIG_SYS_FLASH_BASE 0xe0000000 253 #ifdef CONFIG_PHYS_64BIT 254 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 255 #else 256 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 257 #endif 258 259 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 260 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 261 + 0x8000000) | \ 262 CSPR_PORT_SIZE_16 | \ 263 CSPR_MSEL_NOR | \ 264 CSPR_V) 265 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 266 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 267 CSPR_PORT_SIZE_16 | \ 268 CSPR_MSEL_NOR | \ 269 CSPR_V) 270 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 271 /* NOR Flash Timing Params */ 272 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 273 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 274 FTIM0_NOR_TEADC(0x5) | \ 275 FTIM0_NOR_TEAHC(0x5)) 276 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 277 FTIM1_NOR_TRAD_NOR(0x1A) |\ 278 FTIM1_NOR_TSEQRAD_NOR(0x13)) 279 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 280 FTIM2_NOR_TCH(0x4) | \ 281 FTIM2_NOR_TWPH(0x0E) | \ 282 FTIM2_NOR_TWP(0x1c)) 283 #define CONFIG_SYS_NOR_FTIM3 0x0 284 285 #define CONFIG_SYS_FLASH_QUIET_TEST 286 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 287 288 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 289 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 290 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 291 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 292 293 #define CONFIG_SYS_FLASH_EMPTY_INFO 294 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 295 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 296 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 297 #define QIXIS_BASE 0xffdf0000 298 #ifdef CONFIG_PHYS_64BIT 299 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 300 #else 301 #define QIXIS_BASE_PHYS QIXIS_BASE 302 #endif 303 #define QIXIS_LBMAP_SWITCH 0x06 304 #define QIXIS_LBMAP_MASK 0x0f 305 #define QIXIS_LBMAP_SHIFT 0 306 #define QIXIS_LBMAP_DFLTBANK 0x00 307 #define QIXIS_LBMAP_ALTBANK 0x04 308 #define QIXIS_RST_CTL_RESET 0x31 309 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 310 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 311 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 312 #define QIXIS_RST_FORCE_MEM 0x01 313 314 #define CONFIG_SYS_CSPR3_EXT (0xf) 315 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 316 | CSPR_PORT_SIZE_8 \ 317 | CSPR_MSEL_GPCM \ 318 | CSPR_V) 319 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 320 #define CONFIG_SYS_CSOR3 0x0 321 /* QIXIS Timing parameters for IFC CS3 */ 322 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 323 FTIM0_GPCM_TEADC(0x0e) | \ 324 FTIM0_GPCM_TEAHC(0x0e)) 325 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 326 FTIM1_GPCM_TRAD(0x3f)) 327 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 328 FTIM2_GPCM_TCH(0x8) | \ 329 FTIM2_GPCM_TWP(0x1f)) 330 #define CONFIG_SYS_CS3_FTIM3 0x0 331 332 #define CONFIG_NAND_FSL_IFC 333 #define CONFIG_SYS_NAND_BASE 0xff800000 334 #ifdef CONFIG_PHYS_64BIT 335 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 336 #else 337 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 338 #endif 339 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 340 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 341 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 342 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 343 | CSPR_V) 344 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 345 346 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 347 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 348 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 349 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 350 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 351 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 352 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 353 354 #define CONFIG_SYS_NAND_ONFI_DETECTION 355 356 /* ONFI NAND Flash mode0 Timing Params */ 357 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 358 FTIM0_NAND_TWP(0x18) | \ 359 FTIM0_NAND_TWCHT(0x07) | \ 360 FTIM0_NAND_TWH(0x0a)) 361 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 362 FTIM1_NAND_TWBE(0x39) | \ 363 FTIM1_NAND_TRR(0x0e) | \ 364 FTIM1_NAND_TRP(0x18)) 365 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 366 FTIM2_NAND_TREH(0x0a) | \ 367 FTIM2_NAND_TWHRE(0x1e)) 368 #define CONFIG_SYS_NAND_FTIM3 0x0 369 370 #define CONFIG_SYS_NAND_DDR_LAW 11 371 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 372 #define CONFIG_SYS_MAX_NAND_DEVICE 1 373 #define CONFIG_CMD_NAND 374 375 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 376 377 #if defined(CONFIG_NAND) 378 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 379 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 380 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 381 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 382 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 383 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 384 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 385 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 386 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 387 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 388 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 389 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 390 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 391 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 392 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 393 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 394 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 395 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 396 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 397 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 398 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 399 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 400 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 401 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 402 #else 403 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 404 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 405 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 406 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 407 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 408 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 409 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 410 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 411 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 412 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 413 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 414 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 415 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 416 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 417 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 418 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 419 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 420 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 421 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 422 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 423 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 424 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 425 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 426 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 427 #endif 428 429 #ifdef CONFIG_SPL_BUILD 430 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 431 #else 432 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 433 #endif 434 435 #if defined(CONFIG_RAMBOOT_PBL) 436 #define CONFIG_SYS_RAMBOOT 437 #endif 438 439 #define CONFIG_BOARD_EARLY_INIT_R 440 #define CONFIG_MISC_INIT_R 441 442 #define CONFIG_HWCONFIG 443 444 /* define to use L1 as initial stack */ 445 #define CONFIG_L1_INIT_RAM 446 #define CONFIG_SYS_INIT_RAM_LOCK 447 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 448 #ifdef CONFIG_PHYS_64BIT 449 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 450 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 451 /* The assembler doesn't like typecast */ 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 453 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 454 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 455 #else 456 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 457 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 458 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 459 #endif 460 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 461 462 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 463 GENERATED_GBL_DATA_SIZE) 464 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 465 466 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 467 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 468 469 /* Serial Port */ 470 #define CONFIG_CONS_INDEX 1 471 #define CONFIG_SYS_NS16550_SERIAL 472 #define CONFIG_SYS_NS16550_REG_SIZE 1 473 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 474 475 #define CONFIG_SYS_BAUDRATE_TABLE \ 476 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 477 478 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 479 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 480 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 481 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 482 483 /* Video */ 484 #ifdef CONFIG_ARCH_T1024 /* no DIU on T1023 */ 485 #define CONFIG_FSL_DIU_FB 486 #ifdef CONFIG_FSL_DIU_FB 487 #define CONFIG_FSL_DIU_CH7301 488 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 489 #define CONFIG_CMD_BMP 490 #define CONFIG_VIDEO_LOGO 491 #define CONFIG_VIDEO_BMP_LOGO 492 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 493 /* 494 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 495 * disable empty flash sector detection, which is I/O-intensive. 496 */ 497 #undef CONFIG_SYS_FLASH_EMPTY_INFO 498 #endif 499 #endif 500 501 /* I2C */ 502 #define CONFIG_SYS_I2C 503 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 504 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 505 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 506 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 507 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 508 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 509 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 510 511 #define I2C_MUX_PCA_ADDR 0x77 512 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 513 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 514 #define I2C_RETIMER_ADDR 0x18 515 516 /* I2C bus multiplexer */ 517 #define I2C_MUX_CH_DEFAULT 0x8 518 #define I2C_MUX_CH_DIU 0xC 519 #define I2C_MUX_CH5 0xD 520 #define I2C_MUX_CH7 0xF 521 522 /* LDI/DVI Encoder for display */ 523 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 524 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 525 526 /* 527 * RTC configuration 528 */ 529 #define RTC 530 #define CONFIG_RTC_DS3231 1 531 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 532 533 /* 534 * eSPI - Enhanced SPI 535 */ 536 #ifndef CONFIG_SPL_BUILD 537 #endif 538 #define CONFIG_SPI_FLASH_BAR 539 #define CONFIG_SF_DEFAULT_SPEED 10000000 540 #define CONFIG_SF_DEFAULT_MODE 0 541 542 /* 543 * General PCIe 544 * Memory space is mapped 1-1, but I/O space must start from 0. 545 */ 546 #define CONFIG_PCIE1 /* PCIE controller 1 */ 547 #define CONFIG_PCIE2 /* PCIE controller 2 */ 548 #define CONFIG_PCIE3 /* PCIE controller 3 */ 549 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 550 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 551 #define CONFIG_PCI_INDIRECT_BRIDGE 552 553 #ifdef CONFIG_PCI 554 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 555 #ifdef CONFIG_PCIE1 556 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 557 #ifdef CONFIG_PHYS_64BIT 558 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 559 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 560 #else 561 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 562 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 563 #endif 564 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 565 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 566 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 567 #ifdef CONFIG_PHYS_64BIT 568 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 569 #else 570 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 571 #endif 572 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 573 #endif 574 575 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 576 #ifdef CONFIG_PCIE2 577 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 578 #ifdef CONFIG_PHYS_64BIT 579 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 580 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 581 #else 582 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 583 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 584 #endif 585 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 586 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 587 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 588 #ifdef CONFIG_PHYS_64BIT 589 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 590 #else 591 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 592 #endif 593 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 594 #endif 595 596 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 597 #ifdef CONFIG_PCIE3 598 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 599 #ifdef CONFIG_PHYS_64BIT 600 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 601 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 602 #else 603 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 604 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 605 #endif 606 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 607 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 608 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 609 #ifdef CONFIG_PHYS_64BIT 610 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 611 #else 612 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 613 #endif 614 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 615 #endif 616 617 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 618 #endif /* CONFIG_PCI */ 619 620 /* 621 *SATA 622 */ 623 #define CONFIG_FSL_SATA_V2 624 #ifdef CONFIG_FSL_SATA_V2 625 #define CONFIG_LIBATA 626 #define CONFIG_FSL_SATA 627 #define CONFIG_SYS_SATA_MAX_DEVICE 1 628 #define CONFIG_SATA1 629 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 630 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 631 #define CONFIG_LBA48 632 #define CONFIG_CMD_SATA 633 #endif 634 635 /* 636 * USB 637 */ 638 #define CONFIG_HAS_FSL_DR_USB 639 640 #ifdef CONFIG_HAS_FSL_DR_USB 641 #define CONFIG_USB_EHCI 642 #define CONFIG_USB_EHCI_FSL 643 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 644 #endif 645 646 /* 647 * SDHC 648 */ 649 #ifdef CONFIG_MMC 650 #define CONFIG_FSL_ESDHC 651 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 652 #endif 653 654 /* Qman/Bman */ 655 #ifndef CONFIG_NOBQFMAN 656 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 657 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 658 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 659 #ifdef CONFIG_PHYS_64BIT 660 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 661 #else 662 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 663 #endif 664 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 665 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 666 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 667 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 668 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 669 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 670 CONFIG_SYS_BMAN_CENA_SIZE) 671 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 672 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 673 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 674 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 675 #ifdef CONFIG_PHYS_64BIT 676 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 677 #else 678 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 679 #endif 680 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 681 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 682 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 683 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 684 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 685 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 686 CONFIG_SYS_QMAN_CENA_SIZE) 687 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 688 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 689 690 #define CONFIG_SYS_DPAA_FMAN 691 692 #define CONFIG_QE 693 #define CONFIG_U_QE 694 /* Default address of microcode for the Linux FMan driver */ 695 #if defined(CONFIG_SPIFLASH) 696 /* 697 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 698 * env, so we got 0x110000. 699 */ 700 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 701 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 702 #define CONFIG_SYS_QE_FW_ADDR 0x130000 703 #elif defined(CONFIG_SDCARD) 704 /* 705 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 706 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 707 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 708 */ 709 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 710 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 711 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 712 #elif defined(CONFIG_NAND) 713 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 714 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 715 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 716 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 717 /* 718 * Slave has no ucode locally, it can fetch this from remote. When implementing 719 * in two corenet boards, slave's ucode could be stored in master's memory 720 * space, the address can be mapped from slave TLB->slave LAW-> 721 * slave SRIO or PCIE outbound window->master inbound window-> 722 * master LAW->the ucode address in master's memory space. 723 */ 724 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 725 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 726 #else 727 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 728 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 729 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 730 #endif 731 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 732 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 733 #endif /* CONFIG_NOBQFMAN */ 734 735 #ifdef CONFIG_SYS_DPAA_FMAN 736 #define CONFIG_FMAN_ENET 737 #define CONFIG_PHYLIB_10G 738 #define CONFIG_PHY_VITESSE 739 #define CONFIG_PHY_REALTEK 740 #define CONFIG_PHY_TERANETICS 741 #define RGMII_PHY1_ADDR 0x1 742 #define RGMII_PHY2_ADDR 0x2 743 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3 744 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4 745 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5 746 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 747 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 748 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 749 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 750 #endif 751 752 #ifdef CONFIG_FMAN_ENET 753 #define CONFIG_MII /* MII PHY management */ 754 #define CONFIG_ETHPRIME "FM1@DTSEC4" 755 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 756 #endif 757 758 /* 759 * Dynamic MTD Partition support with mtdparts 760 */ 761 #ifdef CONFIG_MTD_NOR_FLASH 762 #define CONFIG_MTD_DEVICE 763 #define CONFIG_MTD_PARTITIONS 764 #define CONFIG_CMD_MTDPARTS 765 #define CONFIG_FLASH_CFI_MTD 766 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 767 "spi0=spife110000.0" 768 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 769 "128k(dtb),96m(fs),-(user);"\ 770 "fff800000.flash:2m(uboot),9m(kernel),"\ 771 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 772 "2m(uboot),9m(kernel),128k(dtb),-(user)" 773 #endif 774 775 /* 776 * Environment 777 */ 778 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 779 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 780 781 /* 782 * Command line configuration. 783 */ 784 #define CONFIG_CMD_DATE 785 #define CONFIG_CMD_EEPROM 786 #define CONFIG_CMD_ERRATA 787 #define CONFIG_CMD_IRQ 788 #define CONFIG_CMD_REGINFO 789 790 #ifdef CONFIG_PCI 791 #define CONFIG_CMD_PCI 792 #endif 793 794 /* 795 * Miscellaneous configurable options 796 */ 797 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 798 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 799 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 800 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 801 #ifdef CONFIG_CMD_KGDB 802 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 803 #else 804 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 805 #endif 806 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 807 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 808 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 809 810 /* 811 * For booting Linux, the board info and command line data 812 * have to be in the first 64 MB of memory, since this is 813 * the maximum mapped by the Linux kernel during initialization. 814 */ 815 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 816 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 817 818 #ifdef CONFIG_CMD_KGDB 819 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 820 #endif 821 822 /* 823 * Environment Configuration 824 */ 825 #define CONFIG_ROOTPATH "/opt/nfsroot" 826 #define CONFIG_BOOTFILE "uImage" 827 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 828 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 829 #define CONFIG_BAUDRATE 115200 830 #define __USB_PHY_TYPE utmi 831 832 #define CONFIG_EXTRA_ENV_SETTINGS \ 833 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ 834 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 835 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 836 "ramdiskfile=t1024qds/ramdisk.uboot\0" \ 837 "fdtfile=t1024qds/t1024qds.dtb\0" \ 838 "netdev=eth0\0" \ 839 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 840 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 841 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 842 "tftpflash=tftpboot $loadaddr $uboot && " \ 843 "protect off $ubootaddr +$filesize && " \ 844 "erase $ubootaddr +$filesize && " \ 845 "cp.b $loadaddr $ubootaddr $filesize && " \ 846 "protect on $ubootaddr +$filesize && " \ 847 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 848 "consoledev=ttyS0\0" \ 849 "ramdiskaddr=2000000\0" \ 850 "fdtaddr=d00000\0" \ 851 "bdev=sda3\0" 852 853 #define CONFIG_LINUX \ 854 "setenv bootargs root=/dev/ram rw " \ 855 "console=$consoledev,$baudrate $othbootargs;" \ 856 "setenv ramdiskaddr 0x02000000;" \ 857 "setenv fdtaddr 0x00c00000;" \ 858 "setenv loadaddr 0x1000000;" \ 859 "bootm $loadaddr $ramdiskaddr $fdtaddr" 860 861 #define CONFIG_NFSBOOTCOMMAND \ 862 "setenv bootargs root=/dev/nfs rw " \ 863 "nfsroot=$serverip:$rootpath " \ 864 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 865 "console=$consoledev,$baudrate $othbootargs;" \ 866 "tftp $loadaddr $bootfile;" \ 867 "tftp $fdtaddr $fdtfile;" \ 868 "bootm $loadaddr - $fdtaddr" 869 870 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 871 872 /* Hash command with SHA acceleration supported in hardware */ 873 #ifdef CONFIG_FSL_CAAM 874 #define CONFIG_CMD_HASH 875 #define CONFIG_SHA_HW_ACCEL 876 #endif 877 878 #include <asm/fsl_secure_boot.h> 879 880 #endif /* __T1024QDS_H */ 881