1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 QDS board configuration file 9 */ 10 11 #ifndef __T1024QDS_H 12 #define __T1024QDS_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_DISPLAY_BOARDINFO 17 #define CONFIG_BOOKE 18 #define CONFIG_E500 /* BOOKE e500 family */ 19 #define CONFIG_E500MC /* BOOKE e500mc family */ 20 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 21 #define CONFIG_MP /* support multiple processors */ 22 #define CONFIG_PHYS_64BIT 23 #define CONFIG_ENABLE_36BIT_PHYS 24 25 #ifdef CONFIG_PHYS_64BIT 26 #define CONFIG_ADDR_MAP 1 27 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 28 #endif 29 30 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 31 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 32 #define CONFIG_FSL_IFC /* Enable IFC Support */ 33 34 #define CONFIG_FSL_LAW /* Use common FSL init code */ 35 #define CONFIG_ENV_OVERWRITE 36 37 #define CONFIG_DEEP_SLEEP 38 #if defined(CONFIG_DEEP_SLEEP) 39 #define CONFIG_SILENT_CONSOLE 40 #define CONFIG_BOARD_EARLY_INIT_F 41 #endif 42 43 #ifdef CONFIG_RAMBOOT_PBL 44 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg 45 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg 46 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 47 #define CONFIG_SPL_ENV_SUPPORT 48 #define CONFIG_SPL_SERIAL_SUPPORT 49 #define CONFIG_SPL_FLUSH_IMAGE 50 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 51 #define CONFIG_SPL_LIBGENERIC_SUPPORT 52 #define CONFIG_SPL_LIBCOMMON_SUPPORT 53 #define CONFIG_SPL_I2C_SUPPORT 54 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 55 #define CONFIG_FSL_LAW /* Use common FSL init code */ 56 #define CONFIG_SYS_TEXT_BASE 0x00201000 57 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 58 #define CONFIG_SPL_PAD_TO 0x40000 59 #define CONFIG_SPL_MAX_SIZE 0x28000 60 #define RESET_VECTOR_OFFSET 0x27FFC 61 #define BOOT_PAGE_OFFSET 0x27000 62 #ifdef CONFIG_SPL_BUILD 63 #define CONFIG_SPL_SKIP_RELOCATE 64 #define CONFIG_SPL_COMMON_INIT_DDR 65 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 66 #define CONFIG_SYS_NO_FLASH 67 #endif 68 69 #ifdef CONFIG_NAND 70 #define CONFIG_SPL_NAND_SUPPORT 71 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 72 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 73 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 74 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 75 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 76 #define CONFIG_SPL_NAND_BOOT 77 #endif 78 79 #ifdef CONFIG_SPIFLASH 80 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 81 #define CONFIG_SPL_SPI_SUPPORT 82 #define CONFIG_SPL_SPI_FLASH_SUPPORT 83 #define CONFIG_SPL_SPI_FLASH_MINIMAL 84 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 88 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 89 #ifndef CONFIG_SPL_BUILD 90 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 91 #endif 92 #define CONFIG_SPL_SPI_BOOT 93 #endif 94 95 #ifdef CONFIG_SDCARD 96 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 97 #define CONFIG_SPL_MMC_SUPPORT 98 #define CONFIG_SPL_MMC_MINIMAL 99 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 100 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 101 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 102 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 103 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 104 #ifndef CONFIG_SPL_BUILD 105 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 106 #endif 107 #define CONFIG_SPL_MMC_BOOT 108 #endif 109 110 #endif /* CONFIG_RAMBOOT_PBL */ 111 112 #ifndef CONFIG_SYS_TEXT_BASE 113 #define CONFIG_SYS_TEXT_BASE 0xeff40000 114 #endif 115 116 #ifndef CONFIG_RESET_VECTOR_ADDRESS 117 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 118 #endif 119 120 #ifndef CONFIG_SYS_NO_FLASH 121 #define CONFIG_FLASH_CFI_DRIVER 122 #define CONFIG_SYS_FLASH_CFI 123 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 124 #endif 125 126 /* PCIe Boot - Master */ 127 #define CONFIG_SRIO_PCIE_BOOT_MASTER 128 /* 129 * for slave u-boot IMAGE instored in master memory space, 130 * PHYS must be aligned based on the SIZE 131 */ 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 133 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 134 #ifdef CONFIG_PHYS_64BIT 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 136 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 137 #else 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 140 #endif 141 /* 142 * for slave UCODE and ENV instored in master memory space, 143 * PHYS must be aligned based on the SIZE 144 */ 145 #ifdef CONFIG_PHYS_64BIT 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 147 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 148 #else 149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 150 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 151 #endif 152 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 153 /* slave core release by master*/ 154 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 155 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 156 157 /* PCIe Boot - Slave */ 158 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 160 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 161 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 162 /* Set 1M boot space for PCIe boot */ 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 164 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 165 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 166 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 167 #define CONFIG_SYS_NO_FLASH 168 #endif 169 170 #if defined(CONFIG_SPIFLASH) 171 #define CONFIG_SYS_EXTRA_ENV_RELOC 172 #define CONFIG_ENV_IS_IN_SPI_FLASH 173 #define CONFIG_ENV_SPI_BUS 0 174 #define CONFIG_ENV_SPI_CS 0 175 #define CONFIG_ENV_SPI_MAX_HZ 10000000 176 #define CONFIG_ENV_SPI_MODE 0 177 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 178 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 179 #define CONFIG_ENV_SECT_SIZE 0x10000 180 #elif defined(CONFIG_SDCARD) 181 #define CONFIG_SYS_EXTRA_ENV_RELOC 182 #define CONFIG_ENV_IS_IN_MMC 183 #define CONFIG_SYS_MMC_ENV_DEV 0 184 #define CONFIG_ENV_SIZE 0x2000 185 #define CONFIG_ENV_OFFSET (512 * 0x800) 186 #elif defined(CONFIG_NAND) 187 #define CONFIG_SYS_EXTRA_ENV_RELOC 188 #define CONFIG_ENV_IS_IN_NAND 189 #define CONFIG_ENV_SIZE 0x2000 190 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 191 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 192 #define CONFIG_ENV_IS_IN_REMOTE 193 #define CONFIG_ENV_ADDR 0xffe20000 194 #define CONFIG_ENV_SIZE 0x2000 195 #elif defined(CONFIG_ENV_IS_NOWHERE) 196 #define CONFIG_ENV_SIZE 0x2000 197 #else 198 #define CONFIG_ENV_IS_IN_FLASH 199 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 200 #define CONFIG_ENV_SIZE 0x2000 201 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 202 #endif 203 204 205 #ifndef __ASSEMBLY__ 206 unsigned long get_board_sys_clk(void); 207 unsigned long get_board_ddr_clk(void); 208 #endif 209 210 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 211 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 212 213 /* 214 * These can be toggled for performance analysis, otherwise use default. 215 */ 216 #define CONFIG_SYS_CACHE_STASHING 217 #define CONFIG_BACKSIDE_L2_CACHE 218 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 219 #define CONFIG_BTB /* toggle branch predition */ 220 #define CONFIG_DDR_ECC 221 #ifdef CONFIG_DDR_ECC 222 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 223 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 224 #endif 225 226 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 227 #define CONFIG_SYS_MEMTEST_END 0x00400000 228 #define CONFIG_SYS_ALT_MEMTEST 229 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 230 231 /* 232 * Config the L3 Cache as L3 SRAM 233 */ 234 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 235 #define CONFIG_SYS_L3_SIZE (256 << 10) 236 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 237 #ifdef CONFIG_RAMBOOT_PBL 238 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 239 #endif 240 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 241 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 242 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 243 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 244 245 #ifdef CONFIG_PHYS_64BIT 246 #define CONFIG_SYS_DCSRBAR 0xf0000000 247 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 248 #endif 249 250 /* EEPROM */ 251 #define CONFIG_ID_EEPROM 252 #define CONFIG_SYS_I2C_EEPROM_NXID 253 #define CONFIG_SYS_EEPROM_BUS_NUM 0 254 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 255 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 256 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 257 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 258 259 /* 260 * DDR Setup 261 */ 262 #define CONFIG_VERY_BIG_RAM 263 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 264 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 265 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 266 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 267 #define CONFIG_DDR_SPD 268 #ifndef CONFIG_SYS_FSL_DDR4 269 #define CONFIG_SYS_FSL_DDR3 270 #endif 271 272 #define CONFIG_SYS_SPD_BUS_NUM 0 273 #define SPD_EEPROM_ADDRESS 0x51 274 275 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 276 277 /* 278 * IFC Definitions 279 */ 280 #define CONFIG_SYS_FLASH_BASE 0xe0000000 281 #ifdef CONFIG_PHYS_64BIT 282 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 283 #else 284 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 285 #endif 286 287 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 288 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 289 + 0x8000000) | \ 290 CSPR_PORT_SIZE_16 | \ 291 CSPR_MSEL_NOR | \ 292 CSPR_V) 293 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 294 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 295 CSPR_PORT_SIZE_16 | \ 296 CSPR_MSEL_NOR | \ 297 CSPR_V) 298 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 299 /* NOR Flash Timing Params */ 300 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 301 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 302 FTIM0_NOR_TEADC(0x5) | \ 303 FTIM0_NOR_TEAHC(0x5)) 304 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 305 FTIM1_NOR_TRAD_NOR(0x1A) |\ 306 FTIM1_NOR_TSEQRAD_NOR(0x13)) 307 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 308 FTIM2_NOR_TCH(0x4) | \ 309 FTIM2_NOR_TWPH(0x0E) | \ 310 FTIM2_NOR_TWP(0x1c)) 311 #define CONFIG_SYS_NOR_FTIM3 0x0 312 313 #define CONFIG_SYS_FLASH_QUIET_TEST 314 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 315 316 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 317 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 318 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 319 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 320 321 #define CONFIG_SYS_FLASH_EMPTY_INFO 322 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 323 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 324 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 325 #define QIXIS_BASE 0xffdf0000 326 #ifdef CONFIG_PHYS_64BIT 327 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 328 #else 329 #define QIXIS_BASE_PHYS QIXIS_BASE 330 #endif 331 #define QIXIS_LBMAP_SWITCH 0x06 332 #define QIXIS_LBMAP_MASK 0x0f 333 #define QIXIS_LBMAP_SHIFT 0 334 #define QIXIS_LBMAP_DFLTBANK 0x00 335 #define QIXIS_LBMAP_ALTBANK 0x04 336 #define QIXIS_RST_CTL_RESET 0x31 337 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 338 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 339 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 340 #define QIXIS_RST_FORCE_MEM 0x01 341 342 #define CONFIG_SYS_CSPR3_EXT (0xf) 343 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 344 | CSPR_PORT_SIZE_8 \ 345 | CSPR_MSEL_GPCM \ 346 | CSPR_V) 347 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 348 #define CONFIG_SYS_CSOR3 0x0 349 /* QIXIS Timing parameters for IFC CS3 */ 350 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 351 FTIM0_GPCM_TEADC(0x0e) | \ 352 FTIM0_GPCM_TEAHC(0x0e)) 353 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 354 FTIM1_GPCM_TRAD(0x3f)) 355 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 356 FTIM2_GPCM_TCH(0x8) | \ 357 FTIM2_GPCM_TWP(0x1f)) 358 #define CONFIG_SYS_CS3_FTIM3 0x0 359 360 #define CONFIG_NAND_FSL_IFC 361 #define CONFIG_SYS_NAND_BASE 0xff800000 362 #ifdef CONFIG_PHYS_64BIT 363 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 364 #else 365 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 366 #endif 367 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 368 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 369 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 370 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 371 | CSPR_V) 372 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 373 374 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 375 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 376 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 377 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 378 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 379 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 380 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 381 382 #define CONFIG_SYS_NAND_ONFI_DETECTION 383 384 /* ONFI NAND Flash mode0 Timing Params */ 385 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 386 FTIM0_NAND_TWP(0x18) | \ 387 FTIM0_NAND_TWCHT(0x07) | \ 388 FTIM0_NAND_TWH(0x0a)) 389 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 390 FTIM1_NAND_TWBE(0x39) | \ 391 FTIM1_NAND_TRR(0x0e) | \ 392 FTIM1_NAND_TRP(0x18)) 393 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 394 FTIM2_NAND_TREH(0x0a) | \ 395 FTIM2_NAND_TWHRE(0x1e)) 396 #define CONFIG_SYS_NAND_FTIM3 0x0 397 398 #define CONFIG_SYS_NAND_DDR_LAW 11 399 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 400 #define CONFIG_SYS_MAX_NAND_DEVICE 1 401 #define CONFIG_CMD_NAND 402 403 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 404 405 #if defined(CONFIG_NAND) 406 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 407 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 408 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 409 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 410 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 411 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 412 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 413 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 414 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 415 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 416 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 417 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 418 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 419 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 420 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 421 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 422 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 423 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 424 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 425 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 426 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 427 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 428 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 429 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 430 #else 431 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 432 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 433 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 434 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 435 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 436 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 437 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 438 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 439 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 440 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 441 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 442 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 443 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 444 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 445 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 446 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 447 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 448 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 449 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 450 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 451 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 452 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 453 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 454 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 455 #endif 456 457 #ifdef CONFIG_SPL_BUILD 458 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 459 #else 460 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 461 #endif 462 463 #if defined(CONFIG_RAMBOOT_PBL) 464 #define CONFIG_SYS_RAMBOOT 465 #endif 466 467 #define CONFIG_BOARD_EARLY_INIT_R 468 #define CONFIG_MISC_INIT_R 469 470 #define CONFIG_HWCONFIG 471 472 /* define to use L1 as initial stack */ 473 #define CONFIG_L1_INIT_RAM 474 #define CONFIG_SYS_INIT_RAM_LOCK 475 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 476 #ifdef CONFIG_PHYS_64BIT 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 479 /* The assembler doesn't like typecast */ 480 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 481 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 482 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 483 #else 484 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 486 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 487 #endif 488 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 489 490 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 491 GENERATED_GBL_DATA_SIZE) 492 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 493 494 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 495 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 496 497 /* Serial Port */ 498 #define CONFIG_CONS_INDEX 1 499 #define CONFIG_SYS_NS16550 500 #define CONFIG_SYS_NS16550_SERIAL 501 #define CONFIG_SYS_NS16550_REG_SIZE 1 502 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 503 504 #define CONFIG_SYS_BAUDRATE_TABLE \ 505 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 506 507 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 508 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 509 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 510 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 511 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 512 513 /* Use the HUSH parser */ 514 #define CONFIG_SYS_HUSH_PARSER 515 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 516 517 /* Video */ 518 #ifdef CONFIG_PPC_T1024 /* no DIU on T1023 */ 519 #define CONFIG_FSL_DIU_FB 520 #ifdef CONFIG_FSL_DIU_FB 521 #define CONFIG_FSL_DIU_CH7301 522 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 523 #define CONFIG_VIDEO 524 #define CONFIG_CMD_BMP 525 #define CONFIG_CFB_CONSOLE 526 #define CONFIG_VIDEO_SW_CURSOR 527 #define CONFIG_VGA_AS_SINGLE_DEVICE 528 #define CONFIG_VIDEO_LOGO 529 #define CONFIG_VIDEO_BMP_LOGO 530 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 531 /* 532 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 533 * disable empty flash sector detection, which is I/O-intensive. 534 */ 535 #undef CONFIG_SYS_FLASH_EMPTY_INFO 536 #endif 537 #endif 538 539 /* pass open firmware flat tree */ 540 #define CONFIG_OF_LIBFDT 541 #define CONFIG_OF_BOARD_SETUP 542 #define CONFIG_OF_STDOUT_VIA_ALIAS 543 544 /* new uImage format support */ 545 #define CONFIG_FIT 546 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 547 548 /* I2C */ 549 #define CONFIG_SYS_I2C 550 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 551 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 552 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 553 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 554 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 555 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 556 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 557 558 #define I2C_MUX_PCA_ADDR 0x77 559 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 560 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 561 #define I2C_RETIMER_ADDR 0x18 562 563 /* I2C bus multiplexer */ 564 #define I2C_MUX_CH_DEFAULT 0x8 565 #define I2C_MUX_CH_DIU 0xC 566 #define I2C_MUX_CH5 0xD 567 #define I2C_MUX_CH7 0xF 568 569 /* LDI/DVI Encoder for display */ 570 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 571 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 572 573 /* 574 * RTC configuration 575 */ 576 #define RTC 577 #define CONFIG_RTC_DS3231 1 578 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 579 580 /* 581 * eSPI - Enhanced SPI 582 */ 583 #define CONFIG_FSL_ESPI 584 #define CONFIG_SPI_FLASH_STMICRO 585 #ifndef CONFIG_SPL_BUILD 586 #define CONFIG_SPI_FLASH_SST 587 #define CONFIG_SPI_FLASH_EON 588 #endif 589 #define CONFIG_CMD_SF 590 #define CONFIG_SPI_FLASH_BAR 591 #define CONFIG_SF_DEFAULT_SPEED 10000000 592 #define CONFIG_SF_DEFAULT_MODE 0 593 594 /* 595 * General PCIe 596 * Memory space is mapped 1-1, but I/O space must start from 0. 597 */ 598 #define CONFIG_PCI /* Enable PCI/PCIE */ 599 #define CONFIG_PCIE1 /* PCIE controler 1 */ 600 #define CONFIG_PCIE2 /* PCIE controler 2 */ 601 #define CONFIG_PCIE3 /* PCIE controler 3 */ 602 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 603 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 604 #define CONFIG_PCI_INDIRECT_BRIDGE 605 606 #ifdef CONFIG_PCI 607 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 608 #ifdef CONFIG_PCIE1 609 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 610 #ifdef CONFIG_PHYS_64BIT 611 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 612 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 613 #else 614 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 615 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 616 #endif 617 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 618 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 619 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 620 #ifdef CONFIG_PHYS_64BIT 621 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 622 #else 623 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 624 #endif 625 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 626 #endif 627 628 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 629 #ifdef CONFIG_PCIE2 630 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 631 #ifdef CONFIG_PHYS_64BIT 632 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 633 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 634 #else 635 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 636 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 637 #endif 638 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 639 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 640 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 641 #ifdef CONFIG_PHYS_64BIT 642 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 643 #else 644 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 645 #endif 646 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 647 #endif 648 649 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 650 #ifdef CONFIG_PCIE3 651 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 652 #ifdef CONFIG_PHYS_64BIT 653 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 654 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 655 #else 656 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 657 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 658 #endif 659 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 660 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 661 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 662 #ifdef CONFIG_PHYS_64BIT 663 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 664 #else 665 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 666 #endif 667 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 668 #endif 669 670 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 671 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 672 #define CONFIG_DOS_PARTITION 673 #endif /* CONFIG_PCI */ 674 675 /* 676 *SATA 677 */ 678 #define CONFIG_FSL_SATA_V2 679 #ifdef CONFIG_FSL_SATA_V2 680 #define CONFIG_LIBATA 681 #define CONFIG_FSL_SATA 682 #define CONFIG_SYS_SATA_MAX_DEVICE 1 683 #define CONFIG_SATA1 684 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 685 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 686 #define CONFIG_LBA48 687 #define CONFIG_CMD_SATA 688 #define CONFIG_DOS_PARTITION 689 #define CONFIG_CMD_EXT2 690 #endif 691 692 /* 693 * USB 694 */ 695 #define CONFIG_HAS_FSL_DR_USB 696 697 #ifdef CONFIG_HAS_FSL_DR_USB 698 #define CONFIG_USB_EHCI 699 #define CONFIG_CMD_USB 700 #define CONFIG_USB_STORAGE 701 #define CONFIG_USB_EHCI_FSL 702 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 703 #define CONFIG_CMD_EXT2 704 #endif 705 706 /* 707 * SDHC 708 */ 709 #define CONFIG_MMC 710 #ifdef CONFIG_MMC 711 #define CONFIG_FSL_ESDHC 712 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 713 #define CONFIG_CMD_MMC 714 #define CONFIG_GENERIC_MMC 715 #define CONFIG_CMD_EXT2 716 #define CONFIG_CMD_FAT 717 #define CONFIG_DOS_PARTITION 718 #endif 719 720 /* Qman/Bman */ 721 #ifndef CONFIG_NOBQFMAN 722 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 723 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 724 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 725 #ifdef CONFIG_PHYS_64BIT 726 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 727 #else 728 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 729 #endif 730 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 731 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 732 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 733 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 734 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 735 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 736 CONFIG_SYS_BMAN_CENA_SIZE) 737 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 738 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 739 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 740 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 741 #ifdef CONFIG_PHYS_64BIT 742 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 743 #else 744 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 745 #endif 746 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 747 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 748 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 749 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 750 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 751 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 752 CONFIG_SYS_QMAN_CENA_SIZE) 753 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 754 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 755 756 #define CONFIG_SYS_DPAA_FMAN 757 758 #define CONFIG_QE 759 #define CONFIG_U_QE 760 /* Default address of microcode for the Linux FMan driver */ 761 #if defined(CONFIG_SPIFLASH) 762 /* 763 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 764 * env, so we got 0x110000. 765 */ 766 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 767 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 768 #define CONFIG_SYS_QE_FW_ADDR 0x130000 769 #elif defined(CONFIG_SDCARD) 770 /* 771 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 772 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 773 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 774 */ 775 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 776 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 777 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 778 #elif defined(CONFIG_NAND) 779 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 780 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 781 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 782 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 783 /* 784 * Slave has no ucode locally, it can fetch this from remote. When implementing 785 * in two corenet boards, slave's ucode could be stored in master's memory 786 * space, the address can be mapped from slave TLB->slave LAW-> 787 * slave SRIO or PCIE outbound window->master inbound window-> 788 * master LAW->the ucode address in master's memory space. 789 */ 790 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 791 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 792 #else 793 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 794 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 795 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 796 #endif 797 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 798 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 799 #endif /* CONFIG_NOBQFMAN */ 800 801 #ifdef CONFIG_SYS_DPAA_FMAN 802 #define CONFIG_FMAN_ENET 803 #define CONFIG_PHYLIB_10G 804 #define CONFIG_PHY_VITESSE 805 #define CONFIG_PHY_REALTEK 806 #define CONFIG_PHY_TERANETICS 807 #define RGMII_PHY1_ADDR 0x1 808 #define RGMII_PHY2_ADDR 0x2 809 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3 810 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4 811 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5 812 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 813 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 814 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 815 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 816 #endif 817 818 #ifdef CONFIG_FMAN_ENET 819 #define CONFIG_MII /* MII PHY management */ 820 #define CONFIG_ETHPRIME "FM1@DTSEC4" 821 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 822 #endif 823 824 /* 825 * Dynamic MTD Partition support with mtdparts 826 */ 827 #ifndef CONFIG_SYS_NO_FLASH 828 #define CONFIG_MTD_DEVICE 829 #define CONFIG_MTD_PARTITIONS 830 #define CONFIG_CMD_MTDPARTS 831 #define CONFIG_FLASH_CFI_MTD 832 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 833 "spi0=spife110000.0" 834 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 835 "128k(dtb),96m(fs),-(user);"\ 836 "fff800000.flash:2m(uboot),9m(kernel),"\ 837 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 838 "2m(uboot),9m(kernel),128k(dtb),-(user)" 839 #endif 840 841 /* 842 * Environment 843 */ 844 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 845 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 846 847 /* 848 * Command line configuration. 849 */ 850 #define CONFIG_CMD_DATE 851 #define CONFIG_CMD_DHCP 852 #define CONFIG_CMD_EEPROM 853 #define CONFIG_CMD_ELF 854 #define CONFIG_CMD_ERRATA 855 #define CONFIG_CMD_GREPENV 856 #define CONFIG_CMD_IRQ 857 #define CONFIG_CMD_I2C 858 #define CONFIG_CMD_MII 859 #define CONFIG_CMD_PING 860 #define CONFIG_CMD_REGINFO 861 862 #ifdef CONFIG_PCI 863 #define CONFIG_CMD_PCI 864 #endif 865 866 /* 867 * Miscellaneous configurable options 868 */ 869 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 870 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 871 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 872 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 873 #ifdef CONFIG_CMD_KGDB 874 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 875 #else 876 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 877 #endif 878 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 879 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 880 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 881 882 /* 883 * For booting Linux, the board info and command line data 884 * have to be in the first 64 MB of memory, since this is 885 * the maximum mapped by the Linux kernel during initialization. 886 */ 887 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 888 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 889 890 #ifdef CONFIG_CMD_KGDB 891 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 892 #endif 893 894 /* 895 * Environment Configuration 896 */ 897 #define CONFIG_ROOTPATH "/opt/nfsroot" 898 #define CONFIG_BOOTFILE "uImage" 899 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 900 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 901 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 902 #define CONFIG_BAUDRATE 115200 903 #define __USB_PHY_TYPE utmi 904 905 906 #define CONFIG_EXTRA_ENV_SETTINGS \ 907 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ 908 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 909 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 910 "ramdiskfile=t1024qds/ramdisk.uboot\0" \ 911 "fdtfile=t1024qds/t1024qds.dtb\0" \ 912 "netdev=eth0\0" \ 913 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 914 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 915 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 916 "tftpflash=tftpboot $loadaddr $uboot && " \ 917 "protect off $ubootaddr +$filesize && " \ 918 "erase $ubootaddr +$filesize && " \ 919 "cp.b $loadaddr $ubootaddr $filesize && " \ 920 "protect on $ubootaddr +$filesize && " \ 921 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 922 "consoledev=ttyS0\0" \ 923 "ramdiskaddr=2000000\0" \ 924 "fdtaddr=d00000\0" \ 925 "bdev=sda3\0" 926 927 #define CONFIG_LINUX \ 928 "setenv bootargs root=/dev/ram rw " \ 929 "console=$consoledev,$baudrate $othbootargs;" \ 930 "setenv ramdiskaddr 0x02000000;" \ 931 "setenv fdtaddr 0x00c00000;" \ 932 "setenv loadaddr 0x1000000;" \ 933 "bootm $loadaddr $ramdiskaddr $fdtaddr" 934 935 #define CONFIG_NFSBOOTCOMMAND \ 936 "setenv bootargs root=/dev/nfs rw " \ 937 "nfsroot=$serverip:$rootpath " \ 938 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 939 "console=$consoledev,$baudrate $othbootargs;" \ 940 "tftp $loadaddr $bootfile;" \ 941 "tftp $fdtaddr $fdtfile;" \ 942 "bootm $loadaddr - $fdtaddr" 943 944 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 945 946 #ifdef CONFIG_SECURE_BOOT 947 #include <asm/fsl_secure_boot.h> 948 #endif 949 950 #endif /* __T1024QDS_H */ 951