1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 QDS board configuration file 9 */ 10 11 #ifndef __T1024QDS_H 12 #define __T1024QDS_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_DISPLAY_BOARDINFO 16 #define CONFIG_BOOKE 17 #define CONFIG_E500 /* BOOKE e500 family */ 18 #define CONFIG_E500MC /* BOOKE e500mc family */ 19 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 20 #define CONFIG_MP /* support multiple processors */ 21 #define CONFIG_PHYS_64BIT 22 #define CONFIG_ENABLE_36BIT_PHYS 23 24 #ifdef CONFIG_PHYS_64BIT 25 #define CONFIG_ADDR_MAP 1 26 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 27 #endif 28 29 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 30 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 31 #define CONFIG_FSL_IFC /* Enable IFC Support */ 32 33 #define CONFIG_FSL_LAW /* Use common FSL init code */ 34 #define CONFIG_ENV_OVERWRITE 35 36 #define CONFIG_DEEP_SLEEP 37 #if defined(CONFIG_DEEP_SLEEP) 38 #define CONFIG_SILENT_CONSOLE 39 #define CONFIG_BOARD_EARLY_INIT_F 40 #endif 41 42 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 43 44 #ifdef CONFIG_RAMBOOT_PBL 45 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg 46 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg 47 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 48 #define CONFIG_SPL_ENV_SUPPORT 49 #define CONFIG_SPL_SERIAL_SUPPORT 50 #define CONFIG_SPL_FLUSH_IMAGE 51 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 52 #define CONFIG_SPL_LIBGENERIC_SUPPORT 53 #define CONFIG_SPL_LIBCOMMON_SUPPORT 54 #define CONFIG_SPL_I2C_SUPPORT 55 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 56 #define CONFIG_FSL_LAW /* Use common FSL init code */ 57 #define CONFIG_SYS_TEXT_BASE 0x00201000 58 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 59 #define CONFIG_SPL_PAD_TO 0x40000 60 #define CONFIG_SPL_MAX_SIZE 0x28000 61 #define RESET_VECTOR_OFFSET 0x27FFC 62 #define BOOT_PAGE_OFFSET 0x27000 63 #ifdef CONFIG_SPL_BUILD 64 #define CONFIG_SPL_SKIP_RELOCATE 65 #define CONFIG_SPL_COMMON_INIT_DDR 66 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 67 #define CONFIG_SYS_NO_FLASH 68 #endif 69 70 #ifdef CONFIG_NAND 71 #define CONFIG_SPL_NAND_SUPPORT 72 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 73 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 74 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 75 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 76 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 77 #define CONFIG_SPL_NAND_BOOT 78 #endif 79 80 #ifdef CONFIG_SPIFLASH 81 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 82 #define CONFIG_SPL_SPI_SUPPORT 83 #define CONFIG_SPL_SPI_FLASH_SUPPORT 84 #define CONFIG_SPL_SPI_FLASH_MINIMAL 85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 88 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 89 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 90 #ifndef CONFIG_SPL_BUILD 91 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 92 #endif 93 #define CONFIG_SPL_SPI_BOOT 94 #endif 95 96 #ifdef CONFIG_SDCARD 97 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 98 #define CONFIG_SPL_MMC_SUPPORT 99 #define CONFIG_SPL_MMC_MINIMAL 100 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 101 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 102 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 103 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 104 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 105 #ifndef CONFIG_SPL_BUILD 106 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 107 #endif 108 #define CONFIG_SPL_MMC_BOOT 109 #endif 110 111 #endif /* CONFIG_RAMBOOT_PBL */ 112 113 #ifndef CONFIG_SYS_TEXT_BASE 114 #define CONFIG_SYS_TEXT_BASE 0xeff40000 115 #endif 116 117 #ifndef CONFIG_RESET_VECTOR_ADDRESS 118 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 119 #endif 120 121 #ifndef CONFIG_SYS_NO_FLASH 122 #define CONFIG_FLASH_CFI_DRIVER 123 #define CONFIG_SYS_FLASH_CFI 124 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 125 #endif 126 127 /* PCIe Boot - Master */ 128 #define CONFIG_SRIO_PCIE_BOOT_MASTER 129 /* 130 * for slave u-boot IMAGE instored in master memory space, 131 * PHYS must be aligned based on the SIZE 132 */ 133 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 135 #ifdef CONFIG_PHYS_64BIT 136 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 138 #else 139 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 140 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 141 #endif 142 /* 143 * for slave UCODE and ENV instored in master memory space, 144 * PHYS must be aligned based on the SIZE 145 */ 146 #ifdef CONFIG_PHYS_64BIT 147 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 149 #else 150 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 152 #endif 153 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 154 /* slave core release by master*/ 155 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 156 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 157 158 /* PCIe Boot - Slave */ 159 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 160 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 161 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 162 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 163 /* Set 1M boot space for PCIe boot */ 164 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 165 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 166 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 167 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 168 #define CONFIG_SYS_NO_FLASH 169 #endif 170 171 #if defined(CONFIG_SPIFLASH) 172 #define CONFIG_SYS_EXTRA_ENV_RELOC 173 #define CONFIG_ENV_IS_IN_SPI_FLASH 174 #define CONFIG_ENV_SPI_BUS 0 175 #define CONFIG_ENV_SPI_CS 0 176 #define CONFIG_ENV_SPI_MAX_HZ 10000000 177 #define CONFIG_ENV_SPI_MODE 0 178 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 179 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 180 #define CONFIG_ENV_SECT_SIZE 0x10000 181 #elif defined(CONFIG_SDCARD) 182 #define CONFIG_SYS_EXTRA_ENV_RELOC 183 #define CONFIG_ENV_IS_IN_MMC 184 #define CONFIG_SYS_MMC_ENV_DEV 0 185 #define CONFIG_ENV_SIZE 0x2000 186 #define CONFIG_ENV_OFFSET (512 * 0x800) 187 #elif defined(CONFIG_NAND) 188 #define CONFIG_SYS_EXTRA_ENV_RELOC 189 #define CONFIG_ENV_IS_IN_NAND 190 #define CONFIG_ENV_SIZE 0x2000 191 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 192 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 193 #define CONFIG_ENV_IS_IN_REMOTE 194 #define CONFIG_ENV_ADDR 0xffe20000 195 #define CONFIG_ENV_SIZE 0x2000 196 #elif defined(CONFIG_ENV_IS_NOWHERE) 197 #define CONFIG_ENV_SIZE 0x2000 198 #else 199 #define CONFIG_ENV_IS_IN_FLASH 200 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 201 #define CONFIG_ENV_SIZE 0x2000 202 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 203 #endif 204 205 206 #ifndef __ASSEMBLY__ 207 unsigned long get_board_sys_clk(void); 208 unsigned long get_board_ddr_clk(void); 209 #endif 210 211 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 212 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 213 214 /* 215 * These can be toggled for performance analysis, otherwise use default. 216 */ 217 #define CONFIG_SYS_CACHE_STASHING 218 #define CONFIG_BACKSIDE_L2_CACHE 219 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 220 #define CONFIG_BTB /* toggle branch predition */ 221 #define CONFIG_DDR_ECC 222 #ifdef CONFIG_DDR_ECC 223 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 224 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 225 #endif 226 227 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 228 #define CONFIG_SYS_MEMTEST_END 0x00400000 229 #define CONFIG_SYS_ALT_MEMTEST 230 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 231 232 /* 233 * Config the L3 Cache as L3 SRAM 234 */ 235 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 236 #define CONFIG_SYS_L3_SIZE (256 << 10) 237 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 238 #ifdef CONFIG_RAMBOOT_PBL 239 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 240 #endif 241 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 242 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 243 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 244 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 245 246 #ifdef CONFIG_PHYS_64BIT 247 #define CONFIG_SYS_DCSRBAR 0xf0000000 248 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 249 #endif 250 251 /* EEPROM */ 252 #define CONFIG_ID_EEPROM 253 #define CONFIG_SYS_I2C_EEPROM_NXID 254 #define CONFIG_SYS_EEPROM_BUS_NUM 0 255 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 256 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 257 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 258 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 259 260 /* 261 * DDR Setup 262 */ 263 #define CONFIG_VERY_BIG_RAM 264 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 265 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 266 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 267 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 268 #define CONFIG_DDR_SPD 269 #ifndef CONFIG_SYS_FSL_DDR4 270 #define CONFIG_SYS_FSL_DDR3 271 #endif 272 273 #define CONFIG_SYS_SPD_BUS_NUM 0 274 #define SPD_EEPROM_ADDRESS 0x51 275 276 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 277 278 /* 279 * IFC Definitions 280 */ 281 #define CONFIG_SYS_FLASH_BASE 0xe0000000 282 #ifdef CONFIG_PHYS_64BIT 283 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 284 #else 285 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 286 #endif 287 288 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 289 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 290 + 0x8000000) | \ 291 CSPR_PORT_SIZE_16 | \ 292 CSPR_MSEL_NOR | \ 293 CSPR_V) 294 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 295 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 296 CSPR_PORT_SIZE_16 | \ 297 CSPR_MSEL_NOR | \ 298 CSPR_V) 299 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 300 /* NOR Flash Timing Params */ 301 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 302 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 303 FTIM0_NOR_TEADC(0x5) | \ 304 FTIM0_NOR_TEAHC(0x5)) 305 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 306 FTIM1_NOR_TRAD_NOR(0x1A) |\ 307 FTIM1_NOR_TSEQRAD_NOR(0x13)) 308 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 309 FTIM2_NOR_TCH(0x4) | \ 310 FTIM2_NOR_TWPH(0x0E) | \ 311 FTIM2_NOR_TWP(0x1c)) 312 #define CONFIG_SYS_NOR_FTIM3 0x0 313 314 #define CONFIG_SYS_FLASH_QUIET_TEST 315 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 316 317 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 318 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 319 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 320 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 321 322 #define CONFIG_SYS_FLASH_EMPTY_INFO 323 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 324 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 325 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 326 #define QIXIS_BASE 0xffdf0000 327 #ifdef CONFIG_PHYS_64BIT 328 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 329 #else 330 #define QIXIS_BASE_PHYS QIXIS_BASE 331 #endif 332 #define QIXIS_LBMAP_SWITCH 0x06 333 #define QIXIS_LBMAP_MASK 0x0f 334 #define QIXIS_LBMAP_SHIFT 0 335 #define QIXIS_LBMAP_DFLTBANK 0x00 336 #define QIXIS_LBMAP_ALTBANK 0x04 337 #define QIXIS_RST_CTL_RESET 0x31 338 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 339 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 340 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 341 #define QIXIS_RST_FORCE_MEM 0x01 342 343 #define CONFIG_SYS_CSPR3_EXT (0xf) 344 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 345 | CSPR_PORT_SIZE_8 \ 346 | CSPR_MSEL_GPCM \ 347 | CSPR_V) 348 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 349 #define CONFIG_SYS_CSOR3 0x0 350 /* QIXIS Timing parameters for IFC CS3 */ 351 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 352 FTIM0_GPCM_TEADC(0x0e) | \ 353 FTIM0_GPCM_TEAHC(0x0e)) 354 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 355 FTIM1_GPCM_TRAD(0x3f)) 356 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 357 FTIM2_GPCM_TCH(0x8) | \ 358 FTIM2_GPCM_TWP(0x1f)) 359 #define CONFIG_SYS_CS3_FTIM3 0x0 360 361 #define CONFIG_NAND_FSL_IFC 362 #define CONFIG_SYS_NAND_BASE 0xff800000 363 #ifdef CONFIG_PHYS_64BIT 364 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 365 #else 366 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 367 #endif 368 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 369 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 370 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 371 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 372 | CSPR_V) 373 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 374 375 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 376 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 377 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 378 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 379 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 380 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 381 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 382 383 #define CONFIG_SYS_NAND_ONFI_DETECTION 384 385 /* ONFI NAND Flash mode0 Timing Params */ 386 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 387 FTIM0_NAND_TWP(0x18) | \ 388 FTIM0_NAND_TWCHT(0x07) | \ 389 FTIM0_NAND_TWH(0x0a)) 390 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 391 FTIM1_NAND_TWBE(0x39) | \ 392 FTIM1_NAND_TRR(0x0e) | \ 393 FTIM1_NAND_TRP(0x18)) 394 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 395 FTIM2_NAND_TREH(0x0a) | \ 396 FTIM2_NAND_TWHRE(0x1e)) 397 #define CONFIG_SYS_NAND_FTIM3 0x0 398 399 #define CONFIG_SYS_NAND_DDR_LAW 11 400 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 401 #define CONFIG_SYS_MAX_NAND_DEVICE 1 402 #define CONFIG_CMD_NAND 403 404 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 405 406 #if defined(CONFIG_NAND) 407 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 408 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 409 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 410 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 411 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 412 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 413 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 414 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 415 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 416 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 417 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 418 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 419 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 420 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 421 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 422 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 423 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 424 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 425 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 426 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 427 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 428 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 429 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 430 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 431 #else 432 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 433 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 434 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 435 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 436 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 437 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 438 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 439 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 440 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 441 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 442 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 443 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 444 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 445 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 446 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 447 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 448 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 449 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 450 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 451 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 452 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 453 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 454 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 455 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 456 #endif 457 458 #ifdef CONFIG_SPL_BUILD 459 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 460 #else 461 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 462 #endif 463 464 #if defined(CONFIG_RAMBOOT_PBL) 465 #define CONFIG_SYS_RAMBOOT 466 #endif 467 468 #define CONFIG_BOARD_EARLY_INIT_R 469 #define CONFIG_MISC_INIT_R 470 471 #define CONFIG_HWCONFIG 472 473 /* define to use L1 as initial stack */ 474 #define CONFIG_L1_INIT_RAM 475 #define CONFIG_SYS_INIT_RAM_LOCK 476 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 477 #ifdef CONFIG_PHYS_64BIT 478 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 479 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 480 /* The assembler doesn't like typecast */ 481 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 482 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 483 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 484 #else 485 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 486 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 487 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 488 #endif 489 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 490 491 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 492 GENERATED_GBL_DATA_SIZE) 493 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 494 495 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 496 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 497 498 /* Serial Port */ 499 #define CONFIG_CONS_INDEX 1 500 #define CONFIG_SYS_NS16550_SERIAL 501 #define CONFIG_SYS_NS16550_REG_SIZE 1 502 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 503 504 #define CONFIG_SYS_BAUDRATE_TABLE \ 505 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 506 507 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 508 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 509 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 510 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 511 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 512 513 /* Use the HUSH parser */ 514 #define CONFIG_SYS_HUSH_PARSER 515 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 516 517 /* Video */ 518 #ifdef CONFIG_PPC_T1024 /* no DIU on T1023 */ 519 #define CONFIG_FSL_DIU_FB 520 #ifdef CONFIG_FSL_DIU_FB 521 #define CONFIG_FSL_DIU_CH7301 522 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 523 #define CONFIG_VIDEO 524 #define CONFIG_CMD_BMP 525 #define CONFIG_CFB_CONSOLE 526 #define CONFIG_VIDEO_SW_CURSOR 527 #define CONFIG_VGA_AS_SINGLE_DEVICE 528 #define CONFIG_VIDEO_LOGO 529 #define CONFIG_VIDEO_BMP_LOGO 530 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 531 /* 532 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 533 * disable empty flash sector detection, which is I/O-intensive. 534 */ 535 #undef CONFIG_SYS_FLASH_EMPTY_INFO 536 #endif 537 #endif 538 539 /* I2C */ 540 #define CONFIG_SYS_I2C 541 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 542 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 543 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 544 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 545 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 546 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 547 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 548 549 #define I2C_MUX_PCA_ADDR 0x77 550 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 551 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 552 #define I2C_RETIMER_ADDR 0x18 553 554 /* I2C bus multiplexer */ 555 #define I2C_MUX_CH_DEFAULT 0x8 556 #define I2C_MUX_CH_DIU 0xC 557 #define I2C_MUX_CH5 0xD 558 #define I2C_MUX_CH7 0xF 559 560 /* LDI/DVI Encoder for display */ 561 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 562 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 563 564 /* 565 * RTC configuration 566 */ 567 #define RTC 568 #define CONFIG_RTC_DS3231 1 569 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 570 571 /* 572 * eSPI - Enhanced SPI 573 */ 574 #ifndef CONFIG_SPL_BUILD 575 #endif 576 #define CONFIG_CMD_SF 577 #define CONFIG_SPI_FLASH_BAR 578 #define CONFIG_SF_DEFAULT_SPEED 10000000 579 #define CONFIG_SF_DEFAULT_MODE 0 580 581 /* 582 * General PCIe 583 * Memory space is mapped 1-1, but I/O space must start from 0. 584 */ 585 #define CONFIG_PCI /* Enable PCI/PCIE */ 586 #define CONFIG_PCIE1 /* PCIE controler 1 */ 587 #define CONFIG_PCIE2 /* PCIE controler 2 */ 588 #define CONFIG_PCIE3 /* PCIE controler 3 */ 589 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 590 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 591 #define CONFIG_PCI_INDIRECT_BRIDGE 592 593 #ifdef CONFIG_PCI 594 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 595 #ifdef CONFIG_PCIE1 596 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 597 #ifdef CONFIG_PHYS_64BIT 598 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 599 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 600 #else 601 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 602 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 603 #endif 604 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 605 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 606 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 607 #ifdef CONFIG_PHYS_64BIT 608 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 609 #else 610 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 611 #endif 612 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 613 #endif 614 615 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 616 #ifdef CONFIG_PCIE2 617 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 618 #ifdef CONFIG_PHYS_64BIT 619 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 620 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 621 #else 622 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 623 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 624 #endif 625 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 626 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 627 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 628 #ifdef CONFIG_PHYS_64BIT 629 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 630 #else 631 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 632 #endif 633 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 634 #endif 635 636 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 637 #ifdef CONFIG_PCIE3 638 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 639 #ifdef CONFIG_PHYS_64BIT 640 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 641 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 642 #else 643 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 644 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 645 #endif 646 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 647 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 648 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 649 #ifdef CONFIG_PHYS_64BIT 650 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 651 #else 652 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 653 #endif 654 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 655 #endif 656 657 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 658 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 659 #define CONFIG_DOS_PARTITION 660 #endif /* CONFIG_PCI */ 661 662 /* 663 *SATA 664 */ 665 #define CONFIG_FSL_SATA_V2 666 #ifdef CONFIG_FSL_SATA_V2 667 #define CONFIG_LIBATA 668 #define CONFIG_FSL_SATA 669 #define CONFIG_SYS_SATA_MAX_DEVICE 1 670 #define CONFIG_SATA1 671 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 672 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 673 #define CONFIG_LBA48 674 #define CONFIG_CMD_SATA 675 #define CONFIG_DOS_PARTITION 676 #define CONFIG_CMD_EXT2 677 #endif 678 679 /* 680 * USB 681 */ 682 #define CONFIG_HAS_FSL_DR_USB 683 684 #ifdef CONFIG_HAS_FSL_DR_USB 685 #define CONFIG_USB_EHCI 686 #define CONFIG_CMD_USB 687 #define CONFIG_USB_STORAGE 688 #define CONFIG_USB_EHCI_FSL 689 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 690 #define CONFIG_CMD_EXT2 691 #endif 692 693 /* 694 * SDHC 695 */ 696 #define CONFIG_MMC 697 #ifdef CONFIG_MMC 698 #define CONFIG_FSL_ESDHC 699 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 700 #define CONFIG_CMD_MMC 701 #define CONFIG_GENERIC_MMC 702 #define CONFIG_CMD_EXT2 703 #define CONFIG_CMD_FAT 704 #define CONFIG_DOS_PARTITION 705 #endif 706 707 /* Qman/Bman */ 708 #ifndef CONFIG_NOBQFMAN 709 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 710 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 711 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 712 #ifdef CONFIG_PHYS_64BIT 713 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 714 #else 715 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 716 #endif 717 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 718 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 719 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 720 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 721 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 722 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 723 CONFIG_SYS_BMAN_CENA_SIZE) 724 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 725 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 726 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 727 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 728 #ifdef CONFIG_PHYS_64BIT 729 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 730 #else 731 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 732 #endif 733 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 734 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 735 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 736 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 737 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 738 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 739 CONFIG_SYS_QMAN_CENA_SIZE) 740 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 741 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 742 743 #define CONFIG_SYS_DPAA_FMAN 744 745 #define CONFIG_QE 746 #define CONFIG_U_QE 747 /* Default address of microcode for the Linux FMan driver */ 748 #if defined(CONFIG_SPIFLASH) 749 /* 750 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 751 * env, so we got 0x110000. 752 */ 753 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 754 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 755 #define CONFIG_SYS_QE_FW_ADDR 0x130000 756 #elif defined(CONFIG_SDCARD) 757 /* 758 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 759 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 760 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 761 */ 762 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 763 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 764 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 765 #elif defined(CONFIG_NAND) 766 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 767 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 768 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 769 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 770 /* 771 * Slave has no ucode locally, it can fetch this from remote. When implementing 772 * in two corenet boards, slave's ucode could be stored in master's memory 773 * space, the address can be mapped from slave TLB->slave LAW-> 774 * slave SRIO or PCIE outbound window->master inbound window-> 775 * master LAW->the ucode address in master's memory space. 776 */ 777 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 778 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 779 #else 780 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 781 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 782 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 783 #endif 784 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 785 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 786 #endif /* CONFIG_NOBQFMAN */ 787 788 #ifdef CONFIG_SYS_DPAA_FMAN 789 #define CONFIG_FMAN_ENET 790 #define CONFIG_PHYLIB_10G 791 #define CONFIG_PHY_VITESSE 792 #define CONFIG_PHY_REALTEK 793 #define CONFIG_PHY_TERANETICS 794 #define RGMII_PHY1_ADDR 0x1 795 #define RGMII_PHY2_ADDR 0x2 796 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3 797 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4 798 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5 799 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 800 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 801 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 802 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 803 #endif 804 805 #ifdef CONFIG_FMAN_ENET 806 #define CONFIG_MII /* MII PHY management */ 807 #define CONFIG_ETHPRIME "FM1@DTSEC4" 808 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 809 #endif 810 811 /* 812 * Dynamic MTD Partition support with mtdparts 813 */ 814 #ifndef CONFIG_SYS_NO_FLASH 815 #define CONFIG_MTD_DEVICE 816 #define CONFIG_MTD_PARTITIONS 817 #define CONFIG_CMD_MTDPARTS 818 #define CONFIG_FLASH_CFI_MTD 819 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 820 "spi0=spife110000.0" 821 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 822 "128k(dtb),96m(fs),-(user);"\ 823 "fff800000.flash:2m(uboot),9m(kernel),"\ 824 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 825 "2m(uboot),9m(kernel),128k(dtb),-(user)" 826 #endif 827 828 /* 829 * Environment 830 */ 831 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 832 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 833 834 /* 835 * Command line configuration. 836 */ 837 #define CONFIG_CMD_DATE 838 #define CONFIG_CMD_DHCP 839 #define CONFIG_CMD_EEPROM 840 #define CONFIG_CMD_ERRATA 841 #define CONFIG_CMD_GREPENV 842 #define CONFIG_CMD_IRQ 843 #define CONFIG_CMD_I2C 844 #define CONFIG_CMD_MII 845 #define CONFIG_CMD_PING 846 #define CONFIG_CMD_REGINFO 847 848 #ifdef CONFIG_PCI 849 #define CONFIG_CMD_PCI 850 #endif 851 852 /* 853 * Miscellaneous configurable options 854 */ 855 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 856 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 857 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 858 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 859 #ifdef CONFIG_CMD_KGDB 860 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 861 #else 862 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 863 #endif 864 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 865 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 866 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 867 868 /* 869 * For booting Linux, the board info and command line data 870 * have to be in the first 64 MB of memory, since this is 871 * the maximum mapped by the Linux kernel during initialization. 872 */ 873 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 874 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 875 876 #ifdef CONFIG_CMD_KGDB 877 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 878 #endif 879 880 /* 881 * Environment Configuration 882 */ 883 #define CONFIG_ROOTPATH "/opt/nfsroot" 884 #define CONFIG_BOOTFILE "uImage" 885 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 886 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 887 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 888 #define CONFIG_BAUDRATE 115200 889 #define __USB_PHY_TYPE utmi 890 891 892 #define CONFIG_EXTRA_ENV_SETTINGS \ 893 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ 894 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 895 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 896 "ramdiskfile=t1024qds/ramdisk.uboot\0" \ 897 "fdtfile=t1024qds/t1024qds.dtb\0" \ 898 "netdev=eth0\0" \ 899 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 900 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 901 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 902 "tftpflash=tftpboot $loadaddr $uboot && " \ 903 "protect off $ubootaddr +$filesize && " \ 904 "erase $ubootaddr +$filesize && " \ 905 "cp.b $loadaddr $ubootaddr $filesize && " \ 906 "protect on $ubootaddr +$filesize && " \ 907 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 908 "consoledev=ttyS0\0" \ 909 "ramdiskaddr=2000000\0" \ 910 "fdtaddr=d00000\0" \ 911 "bdev=sda3\0" 912 913 #define CONFIG_LINUX \ 914 "setenv bootargs root=/dev/ram rw " \ 915 "console=$consoledev,$baudrate $othbootargs;" \ 916 "setenv ramdiskaddr 0x02000000;" \ 917 "setenv fdtaddr 0x00c00000;" \ 918 "setenv loadaddr 0x1000000;" \ 919 "bootm $loadaddr $ramdiskaddr $fdtaddr" 920 921 #define CONFIG_NFSBOOTCOMMAND \ 922 "setenv bootargs root=/dev/nfs rw " \ 923 "nfsroot=$serverip:$rootpath " \ 924 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 925 "console=$consoledev,$baudrate $othbootargs;" \ 926 "tftp $loadaddr $bootfile;" \ 927 "tftp $fdtaddr $fdtfile;" \ 928 "bootm $loadaddr - $fdtaddr" 929 930 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 931 932 /* Hash command with SHA acceleration supported in hardware */ 933 #ifdef CONFIG_FSL_CAAM 934 #define CONFIG_CMD_HASH 935 #define CONFIG_SHA_HW_ACCEL 936 #endif 937 938 #include <asm/fsl_secure_boot.h> 939 940 #endif /* __T1024QDS_H */ 941