1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 QDS board configuration file 9 */ 10 11 #ifndef __T1024QDS_H 12 #define __T1024QDS_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 16 #define CONFIG_MP /* support multiple processors */ 17 #define CONFIG_ENABLE_36BIT_PHYS 18 19 #ifdef CONFIG_PHYS_64BIT 20 #define CONFIG_ADDR_MAP 1 21 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 22 #endif 23 24 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 25 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 26 27 #define CONFIG_ENV_OVERWRITE 28 29 #define CONFIG_DEEP_SLEEP 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg 33 #define CONFIG_SPL_FLUSH_IMAGE 34 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 35 #define CONFIG_SYS_TEXT_BASE 0x00201000 36 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 37 #define CONFIG_SPL_PAD_TO 0x40000 38 #define CONFIG_SPL_MAX_SIZE 0x28000 39 #define RESET_VECTOR_OFFSET 0x27FFC 40 #define BOOT_PAGE_OFFSET 0x27000 41 #ifdef CONFIG_SPL_BUILD 42 #define CONFIG_SPL_SKIP_RELOCATE 43 #define CONFIG_SPL_COMMON_INIT_DDR 44 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 45 #endif 46 47 #ifdef CONFIG_NAND 48 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 49 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 50 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 51 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 52 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg 54 #define CONFIG_SPL_NAND_BOOT 55 #endif 56 57 #ifdef CONFIG_SPIFLASH 58 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 59 #define CONFIG_SPL_SPI_FLASH_MINIMAL 60 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 61 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) 62 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) 63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 64 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 65 #ifndef CONFIG_SPL_BUILD 66 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 67 #endif 68 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg 69 #define CONFIG_SPL_SPI_BOOT 70 #endif 71 72 #ifdef CONFIG_SDCARD 73 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 74 #define CONFIG_SPL_MMC_MINIMAL 75 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 76 #define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) 77 #define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) 78 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 79 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 80 #ifndef CONFIG_SPL_BUILD 81 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 82 #endif 83 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg 84 #define CONFIG_SPL_MMC_BOOT 85 #endif 86 87 #endif /* CONFIG_RAMBOOT_PBL */ 88 89 #ifndef CONFIG_SYS_TEXT_BASE 90 #define CONFIG_SYS_TEXT_BASE 0xeff40000 91 #endif 92 93 #ifndef CONFIG_RESET_VECTOR_ADDRESS 94 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 95 #endif 96 97 #ifdef CONFIG_MTD_NOR_FLASH 98 #define CONFIG_FLASH_CFI_DRIVER 99 #define CONFIG_SYS_FLASH_CFI 100 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 101 #endif 102 103 /* PCIe Boot - Master */ 104 #define CONFIG_SRIO_PCIE_BOOT_MASTER 105 /* 106 * for slave u-boot IMAGE instored in master memory space, 107 * PHYS must be aligned based on the SIZE 108 */ 109 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 110 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 111 #ifdef CONFIG_PHYS_64BIT 112 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 113 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 114 #else 115 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 116 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 117 #endif 118 /* 119 * for slave UCODE and ENV instored in master memory space, 120 * PHYS must be aligned based on the SIZE 121 */ 122 #ifdef CONFIG_PHYS_64BIT 123 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 124 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 125 #else 126 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 127 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 128 #endif 129 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 130 /* slave core release by master*/ 131 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 132 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 133 134 /* PCIe Boot - Slave */ 135 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 136 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 137 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 138 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 139 /* Set 1M boot space for PCIe boot */ 140 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 141 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 142 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 143 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 144 #endif 145 146 #if defined(CONFIG_SPIFLASH) 147 #define CONFIG_SYS_EXTRA_ENV_RELOC 148 #define CONFIG_ENV_SPI_BUS 0 149 #define CONFIG_ENV_SPI_CS 0 150 #define CONFIG_ENV_SPI_MAX_HZ 10000000 151 #define CONFIG_ENV_SPI_MODE 0 152 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 153 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 154 #define CONFIG_ENV_SECT_SIZE 0x10000 155 #elif defined(CONFIG_SDCARD) 156 #define CONFIG_SYS_EXTRA_ENV_RELOC 157 #define CONFIG_SYS_MMC_ENV_DEV 0 158 #define CONFIG_ENV_SIZE 0x2000 159 #define CONFIG_ENV_OFFSET (512 * 0x800) 160 #elif defined(CONFIG_NAND) 161 #define CONFIG_SYS_EXTRA_ENV_RELOC 162 #define CONFIG_ENV_SIZE 0x2000 163 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 164 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 165 #define CONFIG_ENV_ADDR 0xffe20000 166 #define CONFIG_ENV_SIZE 0x2000 167 #elif defined(CONFIG_ENV_IS_NOWHERE) 168 #define CONFIG_ENV_SIZE 0x2000 169 #else 170 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 171 #define CONFIG_ENV_SIZE 0x2000 172 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 173 #endif 174 175 #ifndef __ASSEMBLY__ 176 unsigned long get_board_sys_clk(void); 177 unsigned long get_board_ddr_clk(void); 178 #endif 179 180 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 181 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 182 183 /* 184 * These can be toggled for performance analysis, otherwise use default. 185 */ 186 #define CONFIG_SYS_CACHE_STASHING 187 #define CONFIG_BACKSIDE_L2_CACHE 188 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 189 #define CONFIG_BTB /* toggle branch predition */ 190 #define CONFIG_DDR_ECC 191 #ifdef CONFIG_DDR_ECC 192 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 193 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 194 #endif 195 196 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 197 #define CONFIG_SYS_MEMTEST_END 0x00400000 198 #define CONFIG_SYS_ALT_MEMTEST 199 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 200 201 /* 202 * Config the L3 Cache as L3 SRAM 203 */ 204 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 205 #define CONFIG_SYS_L3_SIZE (256 << 10) 206 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 207 #ifdef CONFIG_RAMBOOT_PBL 208 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 209 #endif 210 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 211 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 212 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 213 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 214 215 #ifdef CONFIG_PHYS_64BIT 216 #define CONFIG_SYS_DCSRBAR 0xf0000000 217 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 218 #endif 219 220 /* EEPROM */ 221 #define CONFIG_ID_EEPROM 222 #define CONFIG_SYS_I2C_EEPROM_NXID 223 #define CONFIG_SYS_EEPROM_BUS_NUM 0 224 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 225 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 226 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 227 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 228 229 /* 230 * DDR Setup 231 */ 232 #define CONFIG_VERY_BIG_RAM 233 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 234 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 235 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 236 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 237 #define CONFIG_DDR_SPD 238 239 #define CONFIG_SYS_SPD_BUS_NUM 0 240 #define SPD_EEPROM_ADDRESS 0x51 241 242 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 243 244 /* 245 * IFC Definitions 246 */ 247 #define CONFIG_SYS_FLASH_BASE 0xe0000000 248 #ifdef CONFIG_PHYS_64BIT 249 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 250 #else 251 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 252 #endif 253 254 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 255 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 256 + 0x8000000) | \ 257 CSPR_PORT_SIZE_16 | \ 258 CSPR_MSEL_NOR | \ 259 CSPR_V) 260 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 261 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 262 CSPR_PORT_SIZE_16 | \ 263 CSPR_MSEL_NOR | \ 264 CSPR_V) 265 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 266 /* NOR Flash Timing Params */ 267 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 268 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 269 FTIM0_NOR_TEADC(0x5) | \ 270 FTIM0_NOR_TEAHC(0x5)) 271 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 272 FTIM1_NOR_TRAD_NOR(0x1A) |\ 273 FTIM1_NOR_TSEQRAD_NOR(0x13)) 274 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 275 FTIM2_NOR_TCH(0x4) | \ 276 FTIM2_NOR_TWPH(0x0E) | \ 277 FTIM2_NOR_TWP(0x1c)) 278 #define CONFIG_SYS_NOR_FTIM3 0x0 279 280 #define CONFIG_SYS_FLASH_QUIET_TEST 281 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 282 283 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 284 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 285 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 286 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 287 288 #define CONFIG_SYS_FLASH_EMPTY_INFO 289 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 290 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 291 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 292 #define QIXIS_BASE 0xffdf0000 293 #ifdef CONFIG_PHYS_64BIT 294 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 295 #else 296 #define QIXIS_BASE_PHYS QIXIS_BASE 297 #endif 298 #define QIXIS_LBMAP_SWITCH 0x06 299 #define QIXIS_LBMAP_MASK 0x0f 300 #define QIXIS_LBMAP_SHIFT 0 301 #define QIXIS_LBMAP_DFLTBANK 0x00 302 #define QIXIS_LBMAP_ALTBANK 0x04 303 #define QIXIS_RST_CTL_RESET 0x31 304 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 305 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 306 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 307 #define QIXIS_RST_FORCE_MEM 0x01 308 309 #define CONFIG_SYS_CSPR3_EXT (0xf) 310 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 311 | CSPR_PORT_SIZE_8 \ 312 | CSPR_MSEL_GPCM \ 313 | CSPR_V) 314 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 315 #define CONFIG_SYS_CSOR3 0x0 316 /* QIXIS Timing parameters for IFC CS3 */ 317 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 318 FTIM0_GPCM_TEADC(0x0e) | \ 319 FTIM0_GPCM_TEAHC(0x0e)) 320 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 321 FTIM1_GPCM_TRAD(0x3f)) 322 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 323 FTIM2_GPCM_TCH(0x8) | \ 324 FTIM2_GPCM_TWP(0x1f)) 325 #define CONFIG_SYS_CS3_FTIM3 0x0 326 327 #define CONFIG_NAND_FSL_IFC 328 #define CONFIG_SYS_NAND_BASE 0xff800000 329 #ifdef CONFIG_PHYS_64BIT 330 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 331 #else 332 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 333 #endif 334 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 335 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 336 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 337 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 338 | CSPR_V) 339 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 340 341 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 342 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 343 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 344 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 345 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 346 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 347 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 348 349 #define CONFIG_SYS_NAND_ONFI_DETECTION 350 351 /* ONFI NAND Flash mode0 Timing Params */ 352 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 353 FTIM0_NAND_TWP(0x18) | \ 354 FTIM0_NAND_TWCHT(0x07) | \ 355 FTIM0_NAND_TWH(0x0a)) 356 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 357 FTIM1_NAND_TWBE(0x39) | \ 358 FTIM1_NAND_TRR(0x0e) | \ 359 FTIM1_NAND_TRP(0x18)) 360 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 361 FTIM2_NAND_TREH(0x0a) | \ 362 FTIM2_NAND_TWHRE(0x1e)) 363 #define CONFIG_SYS_NAND_FTIM3 0x0 364 365 #define CONFIG_SYS_NAND_DDR_LAW 11 366 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 367 #define CONFIG_SYS_MAX_NAND_DEVICE 1 368 369 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 370 371 #if defined(CONFIG_NAND) 372 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 373 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 374 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 375 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 376 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 377 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 378 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 379 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 380 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 381 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 382 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 383 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 384 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 385 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 386 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 387 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 388 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 389 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 390 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 391 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 392 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 393 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 394 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 395 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 396 #else 397 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 398 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 399 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 400 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 401 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 402 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 403 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 404 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 405 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 406 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 407 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 408 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 409 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 410 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 411 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 412 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 413 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 414 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 415 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 416 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 417 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 418 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 419 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 420 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 421 #endif 422 423 #ifdef CONFIG_SPL_BUILD 424 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 425 #else 426 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 427 #endif 428 429 #if defined(CONFIG_RAMBOOT_PBL) 430 #define CONFIG_SYS_RAMBOOT 431 #endif 432 433 #define CONFIG_BOARD_EARLY_INIT_R 434 #define CONFIG_MISC_INIT_R 435 436 #define CONFIG_HWCONFIG 437 438 /* define to use L1 as initial stack */ 439 #define CONFIG_L1_INIT_RAM 440 #define CONFIG_SYS_INIT_RAM_LOCK 441 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 442 #ifdef CONFIG_PHYS_64BIT 443 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 444 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 445 /* The assembler doesn't like typecast */ 446 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 447 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 448 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 449 #else 450 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 451 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 453 #endif 454 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 455 456 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 457 GENERATED_GBL_DATA_SIZE) 458 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 459 460 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 461 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 462 463 /* Serial Port */ 464 #define CONFIG_CONS_INDEX 1 465 #define CONFIG_SYS_NS16550_SERIAL 466 #define CONFIG_SYS_NS16550_REG_SIZE 1 467 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 468 469 #define CONFIG_SYS_BAUDRATE_TABLE \ 470 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 471 472 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 473 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 474 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 475 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 476 477 /* Video */ 478 #ifdef CONFIG_ARCH_T1024 /* no DIU on T1023 */ 479 #define CONFIG_FSL_DIU_FB 480 #ifdef CONFIG_FSL_DIU_FB 481 #define CONFIG_FSL_DIU_CH7301 482 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 483 #define CONFIG_VIDEO_LOGO 484 #define CONFIG_VIDEO_BMP_LOGO 485 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 486 /* 487 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 488 * disable empty flash sector detection, which is I/O-intensive. 489 */ 490 #undef CONFIG_SYS_FLASH_EMPTY_INFO 491 #endif 492 #endif 493 494 /* I2C */ 495 #define CONFIG_SYS_I2C 496 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 497 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 498 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 499 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 500 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 501 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 502 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 503 504 #define I2C_MUX_PCA_ADDR 0x77 505 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ 506 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 507 #define I2C_RETIMER_ADDR 0x18 508 509 /* I2C bus multiplexer */ 510 #define I2C_MUX_CH_DEFAULT 0x8 511 #define I2C_MUX_CH_DIU 0xC 512 #define I2C_MUX_CH5 0xD 513 #define I2C_MUX_CH7 0xF 514 515 /* LDI/DVI Encoder for display */ 516 #define CONFIG_SYS_I2C_LDI_ADDR 0x38 517 #define CONFIG_SYS_I2C_DVI_ADDR 0x75 518 519 /* 520 * RTC configuration 521 */ 522 #define RTC 523 #define CONFIG_RTC_DS3231 1 524 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 525 526 /* 527 * eSPI - Enhanced SPI 528 */ 529 #ifndef CONFIG_SPL_BUILD 530 #endif 531 #define CONFIG_SPI_FLASH_BAR 532 #define CONFIG_SF_DEFAULT_SPEED 10000000 533 #define CONFIG_SF_DEFAULT_MODE 0 534 535 /* 536 * General PCIe 537 * Memory space is mapped 1-1, but I/O space must start from 0. 538 */ 539 #define CONFIG_PCIE1 /* PCIE controller 1 */ 540 #define CONFIG_PCIE2 /* PCIE controller 2 */ 541 #define CONFIG_PCIE3 /* PCIE controller 3 */ 542 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 543 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 544 #define CONFIG_PCI_INDIRECT_BRIDGE 545 546 #ifdef CONFIG_PCI 547 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 548 #ifdef CONFIG_PCIE1 549 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 550 #ifdef CONFIG_PHYS_64BIT 551 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 552 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 553 #else 554 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 555 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 556 #endif 557 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 558 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 559 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 560 #ifdef CONFIG_PHYS_64BIT 561 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 562 #else 563 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 564 #endif 565 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 566 #endif 567 568 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 569 #ifdef CONFIG_PCIE2 570 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 571 #ifdef CONFIG_PHYS_64BIT 572 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 573 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 574 #else 575 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 576 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 577 #endif 578 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 579 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 580 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 581 #ifdef CONFIG_PHYS_64BIT 582 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 583 #else 584 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 585 #endif 586 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 587 #endif 588 589 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 590 #ifdef CONFIG_PCIE3 591 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 592 #ifdef CONFIG_PHYS_64BIT 593 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 594 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 595 #else 596 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 597 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 598 #endif 599 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 600 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 601 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 602 #ifdef CONFIG_PHYS_64BIT 603 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 604 #else 605 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 606 #endif 607 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 608 #endif 609 610 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 611 #endif /* CONFIG_PCI */ 612 613 /* 614 *SATA 615 */ 616 #define CONFIG_FSL_SATA_V2 617 #ifdef CONFIG_FSL_SATA_V2 618 #define CONFIG_LIBATA 619 #define CONFIG_FSL_SATA 620 #define CONFIG_SYS_SATA_MAX_DEVICE 1 621 #define CONFIG_SATA1 622 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 623 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 624 #define CONFIG_LBA48 625 #endif 626 627 /* 628 * USB 629 */ 630 #define CONFIG_HAS_FSL_DR_USB 631 632 #ifdef CONFIG_HAS_FSL_DR_USB 633 #define CONFIG_USB_EHCI_FSL 634 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 635 #endif 636 637 /* 638 * SDHC 639 */ 640 #ifdef CONFIG_MMC 641 #define CONFIG_FSL_ESDHC 642 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 643 #endif 644 645 /* Qman/Bman */ 646 #ifndef CONFIG_NOBQFMAN 647 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 648 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 649 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 650 #ifdef CONFIG_PHYS_64BIT 651 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 652 #else 653 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 654 #endif 655 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 656 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 657 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 658 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 659 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 660 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 661 CONFIG_SYS_BMAN_CENA_SIZE) 662 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 663 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 664 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 665 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 666 #ifdef CONFIG_PHYS_64BIT 667 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 668 #else 669 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 670 #endif 671 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 672 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 673 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 674 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 675 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 676 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 677 CONFIG_SYS_QMAN_CENA_SIZE) 678 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 679 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 680 681 #define CONFIG_SYS_DPAA_FMAN 682 683 #define CONFIG_QE 684 #define CONFIG_U_QE 685 /* Default address of microcode for the Linux FMan driver */ 686 #if defined(CONFIG_SPIFLASH) 687 /* 688 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 689 * env, so we got 0x110000. 690 */ 691 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 692 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 693 #define CONFIG_SYS_QE_FW_ADDR 0x130000 694 #elif defined(CONFIG_SDCARD) 695 /* 696 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 697 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 698 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 699 */ 700 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 701 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 702 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 703 #elif defined(CONFIG_NAND) 704 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 705 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 706 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 707 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 708 /* 709 * Slave has no ucode locally, it can fetch this from remote. When implementing 710 * in two corenet boards, slave's ucode could be stored in master's memory 711 * space, the address can be mapped from slave TLB->slave LAW-> 712 * slave SRIO or PCIE outbound window->master inbound window-> 713 * master LAW->the ucode address in master's memory space. 714 */ 715 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 716 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 717 #else 718 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 719 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 720 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 721 #endif 722 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 723 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 724 #endif /* CONFIG_NOBQFMAN */ 725 726 #ifdef CONFIG_SYS_DPAA_FMAN 727 #define CONFIG_FMAN_ENET 728 #define CONFIG_PHYLIB_10G 729 #define CONFIG_PHY_VITESSE 730 #define CONFIG_PHY_REALTEK 731 #define CONFIG_PHY_TERANETICS 732 #define RGMII_PHY1_ADDR 0x1 733 #define RGMII_PHY2_ADDR 0x2 734 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3 735 #define SGMII_CARD_AQ_PHY_ADDR_S4 0x4 736 #define SGMII_CARD_AQ_PHY_ADDR_S5 0x5 737 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 738 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D 739 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 740 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 741 #endif 742 743 #ifdef CONFIG_FMAN_ENET 744 #define CONFIG_MII /* MII PHY management */ 745 #define CONFIG_ETHPRIME "FM1@DTSEC4" 746 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 747 #endif 748 749 /* 750 * Dynamic MTD Partition support with mtdparts 751 */ 752 #ifdef CONFIG_MTD_NOR_FLASH 753 #define CONFIG_MTD_DEVICE 754 #define CONFIG_MTD_PARTITIONS 755 #define CONFIG_FLASH_CFI_MTD 756 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 757 "spi0=spife110000.0" 758 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 759 "128k(dtb),96m(fs),-(user);"\ 760 "fff800000.flash:2m(uboot),9m(kernel),"\ 761 "128k(dtb),96m(fs),-(user);spife110000.0:" \ 762 "2m(uboot),9m(kernel),128k(dtb),-(user)" 763 #endif 764 765 /* 766 * Environment 767 */ 768 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 769 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 770 771 /* 772 * Command line configuration. 773 */ 774 #define CONFIG_CMD_REGINFO 775 776 #ifdef CONFIG_PCI 777 #define CONFIG_CMD_PCI 778 #endif 779 780 /* 781 * Miscellaneous configurable options 782 */ 783 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 784 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 785 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 786 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 787 #ifdef CONFIG_CMD_KGDB 788 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 789 #else 790 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 791 #endif 792 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 793 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 794 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 795 796 /* 797 * For booting Linux, the board info and command line data 798 * have to be in the first 64 MB of memory, since this is 799 * the maximum mapped by the Linux kernel during initialization. 800 */ 801 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 802 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 803 804 #ifdef CONFIG_CMD_KGDB 805 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 806 #endif 807 808 /* 809 * Environment Configuration 810 */ 811 #define CONFIG_ROOTPATH "/opt/nfsroot" 812 #define CONFIG_BOOTFILE "uImage" 813 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ 814 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 815 #define __USB_PHY_TYPE utmi 816 817 #define CONFIG_EXTRA_ENV_SETTINGS \ 818 "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \ 819 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 820 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 821 "ramdiskfile=t1024qds/ramdisk.uboot\0" \ 822 "fdtfile=t1024qds/t1024qds.dtb\0" \ 823 "netdev=eth0\0" \ 824 "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \ 825 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 826 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 827 "tftpflash=tftpboot $loadaddr $uboot && " \ 828 "protect off $ubootaddr +$filesize && " \ 829 "erase $ubootaddr +$filesize && " \ 830 "cp.b $loadaddr $ubootaddr $filesize && " \ 831 "protect on $ubootaddr +$filesize && " \ 832 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 833 "consoledev=ttyS0\0" \ 834 "ramdiskaddr=2000000\0" \ 835 "fdtaddr=d00000\0" \ 836 "bdev=sda3\0" 837 838 #define CONFIG_LINUX \ 839 "setenv bootargs root=/dev/ram rw " \ 840 "console=$consoledev,$baudrate $othbootargs;" \ 841 "setenv ramdiskaddr 0x02000000;" \ 842 "setenv fdtaddr 0x00c00000;" \ 843 "setenv loadaddr 0x1000000;" \ 844 "bootm $loadaddr $ramdiskaddr $fdtaddr" 845 846 #define CONFIG_NFSBOOTCOMMAND \ 847 "setenv bootargs root=/dev/nfs rw " \ 848 "nfsroot=$serverip:$rootpath " \ 849 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 850 "console=$consoledev,$baudrate $othbootargs;" \ 851 "tftp $loadaddr $bootfile;" \ 852 "tftp $fdtaddr $fdtfile;" \ 853 "bootm $loadaddr - $fdtaddr" 854 855 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 856 857 #include <asm/fsl_secure_boot.h> 858 859 #endif /* __T1024QDS_H */ 860