1 /* 2 * Copyright 2011-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * P2041 RDB board configuration file 9 * Also supports P2040 RDB 10 */ 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_P2041RDB 15 #define CONFIG_PHYS_64BIT 16 #define CONFIG_PPC_P2041 17 18 #ifdef CONFIG_RAMBOOT_PBL 19 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 20 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 21 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg 22 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg 23 #endif 24 25 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 26 /* Set 1M boot space */ 27 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 28 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 29 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 30 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 31 #define CONFIG_SYS_NO_FLASH 32 #endif 33 34 /* High Level Configuration Options */ 35 #define CONFIG_BOOKE 36 #define CONFIG_E500 /* BOOKE e500 family */ 37 #define CONFIG_E500MC /* BOOKE e500mc family */ 38 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 39 #define CONFIG_MP /* support multiple processors */ 40 41 #ifndef CONFIG_SYS_TEXT_BASE 42 #define CONFIG_SYS_TEXT_BASE 0xeff40000 43 #endif 44 45 #ifndef CONFIG_RESET_VECTOR_ADDRESS 46 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 47 #endif 48 49 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 50 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 51 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 52 #define CONFIG_PCI /* Enable PCI/PCIE */ 53 #define CONFIG_PCIE1 /* PCIE controler 1 */ 54 #define CONFIG_PCIE2 /* PCIE controler 2 */ 55 #define CONFIG_PCIE3 /* PCIE controler 3 */ 56 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 57 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 58 59 #define CONFIG_SYS_SRIO 60 #define CONFIG_SRIO1 /* SRIO port 1 */ 61 #define CONFIG_SRIO2 /* SRIO port 2 */ 62 #define CONFIG_SRIO_PCIE_BOOT_MASTER 63 #define CONFIG_SYS_DPAA_RMAN /* RMan */ 64 65 #define CONFIG_FSL_LAW /* Use common FSL init code */ 66 67 #define CONFIG_ENV_OVERWRITE 68 69 #ifdef CONFIG_SYS_NO_FLASH 70 #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 71 #define CONFIG_ENV_IS_NOWHERE 72 #endif 73 #else 74 #define CONFIG_FLASH_CFI_DRIVER 75 #define CONFIG_SYS_FLASH_CFI 76 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 77 #endif 78 79 #if defined(CONFIG_SPIFLASH) 80 #define CONFIG_SYS_EXTRA_ENV_RELOC 81 #define CONFIG_ENV_IS_IN_SPI_FLASH 82 #define CONFIG_ENV_SPI_BUS 0 83 #define CONFIG_ENV_SPI_CS 0 84 #define CONFIG_ENV_SPI_MAX_HZ 10000000 85 #define CONFIG_ENV_SPI_MODE 0 86 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 87 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 88 #define CONFIG_ENV_SECT_SIZE 0x10000 89 #elif defined(CONFIG_SDCARD) 90 #define CONFIG_SYS_EXTRA_ENV_RELOC 91 #define CONFIG_ENV_IS_IN_MMC 92 #define CONFIG_FSL_FIXED_MMC_LOCATION 93 #define CONFIG_SYS_MMC_ENV_DEV 0 94 #define CONFIG_ENV_SIZE 0x2000 95 #define CONFIG_ENV_OFFSET (512 * 1658) 96 #elif defined(CONFIG_NAND) 97 #define CONFIG_SYS_EXTRA_ENV_RELOC 98 #define CONFIG_ENV_IS_IN_NAND 99 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 100 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 101 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 102 #define CONFIG_ENV_IS_IN_REMOTE 103 #define CONFIG_ENV_ADDR 0xffe20000 104 #define CONFIG_ENV_SIZE 0x2000 105 #elif defined(CONFIG_ENV_IS_NOWHERE) 106 #define CONFIG_ENV_SIZE 0x2000 107 #else 108 #define CONFIG_ENV_IS_IN_FLASH 109 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ 110 - CONFIG_ENV_SECT_SIZE) 111 #define CONFIG_ENV_SIZE 0x2000 112 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 113 #endif 114 115 #ifndef __ASSEMBLY__ 116 unsigned long get_board_sys_clk(unsigned long dummy); 117 #endif 118 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 119 120 /* 121 * These can be toggled for performance analysis, otherwise use default. 122 */ 123 #define CONFIG_SYS_CACHE_STASHING 124 #define CONFIG_BACKSIDE_L2_CACHE 125 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 126 #define CONFIG_BTB /* toggle branch predition */ 127 128 #define CONFIG_ENABLE_36BIT_PHYS 129 130 #ifdef CONFIG_PHYS_64BIT 131 #define CONFIG_ADDR_MAP 132 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 133 #endif 134 135 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 136 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 137 #define CONFIG_SYS_MEMTEST_END 0x00400000 138 #define CONFIG_SYS_ALT_MEMTEST 139 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 140 141 /* 142 * Config the L3 Cache as L3 SRAM 143 */ 144 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 145 #ifdef CONFIG_PHYS_64BIT 146 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ 147 CONFIG_RAMBOOT_TEXT_BASE) 148 #else 149 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 150 #endif 151 #define CONFIG_SYS_L3_SIZE (1024 << 10) 152 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 153 154 #ifdef CONFIG_PHYS_64BIT 155 #define CONFIG_SYS_DCSRBAR 0xf0000000 156 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 157 #endif 158 159 /* EEPROM */ 160 #define CONFIG_ID_EEPROM 161 #define CONFIG_SYS_I2C_EEPROM_NXID 162 #define CONFIG_SYS_EEPROM_BUS_NUM 0 163 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 164 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 165 166 /* 167 * DDR Setup 168 */ 169 #define CONFIG_VERY_BIG_RAM 170 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 171 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 172 173 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 174 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 175 176 #define CONFIG_DDR_SPD 177 #define CONFIG_SYS_FSL_DDR3 178 179 #define CONFIG_SYS_SPD_BUS_NUM 0 180 #define SPD_EEPROM_ADDRESS 0x52 181 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 182 183 /* 184 * Local Bus Definitions 185 */ 186 187 /* Set the local bus clock 1/8 of platform clock */ 188 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 189 190 /* 191 * This board doesn't have a promjet connector. 192 * However, it uses commone corenet board LAW and TLB. 193 * It is necessary to use the same start address with proper offset. 194 */ 195 #define CONFIG_SYS_FLASH_BASE 0xe0000000 196 #ifdef CONFIG_PHYS_64BIT 197 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 198 #else 199 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 200 #endif 201 202 #define CONFIG_SYS_FLASH_BR_PRELIM \ 203 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ 204 BR_PS_16 | BR_V) 205 #define CONFIG_SYS_FLASH_OR_PRELIM \ 206 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 207 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 208 209 #define CONFIG_FSL_CPLD 210 #define CPLD_BASE 0xffdf0000 /* CPLD registers */ 211 #ifdef CONFIG_PHYS_64BIT 212 #define CPLD_BASE_PHYS 0xfffdf0000ull 213 #else 214 #define CPLD_BASE_PHYS CPLD_BASE 215 #endif 216 217 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) 218 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 219 220 #define PIXIS_LBMAP_SWITCH 7 221 #define PIXIS_LBMAP_MASK 0xf0 222 #define PIXIS_LBMAP_SHIFT 4 223 #define PIXIS_LBMAP_ALTBANK 0x40 224 225 #define CONFIG_SYS_FLASH_QUIET_TEST 226 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 227 228 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 229 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 230 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ 231 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ 232 233 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 234 235 #if defined(CONFIG_RAMBOOT_PBL) 236 #define CONFIG_SYS_RAMBOOT 237 #endif 238 239 #define CONFIG_NAND_FSL_ELBC 240 /* Nand Flash */ 241 #ifdef CONFIG_NAND_FSL_ELBC 242 #define CONFIG_SYS_NAND_BASE 0xffa00000 243 #ifdef CONFIG_PHYS_64BIT 244 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 245 #else 246 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 247 #endif 248 249 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 250 #define CONFIG_SYS_MAX_NAND_DEVICE 1 251 #define CONFIG_MTD_NAND_VERIFY_WRITE 252 #define CONFIG_CMD_NAND 253 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 254 255 /* NAND flash config */ 256 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 257 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 258 | BR_PS_8 /* Port Size = 8 bit */ \ 259 | BR_MS_FCM /* MSEL = FCM */ \ 260 | BR_V) /* valid */ 261 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 262 | OR_FCM_PGS /* Large Page*/ \ 263 | OR_FCM_CSCT \ 264 | OR_FCM_CST \ 265 | OR_FCM_CHT \ 266 | OR_FCM_SCY_1 \ 267 | OR_FCM_TRLX \ 268 | OR_FCM_EHTR) 269 270 #ifdef CONFIG_NAND 271 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 272 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 273 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 274 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 275 #else 276 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 277 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 278 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 279 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 280 #endif 281 #else 282 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 283 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 284 #endif /* CONFIG_NAND_FSL_ELBC */ 285 286 #define CONFIG_SYS_FLASH_EMPTY_INFO 287 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 288 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} 289 290 #define CONFIG_BOARD_EARLY_INIT_F 291 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 292 #define CONFIG_MISC_INIT_R 293 294 #define CONFIG_HWCONFIG 295 296 /* define to use L1 as initial stack */ 297 #define CONFIG_L1_INIT_RAM 298 #define CONFIG_SYS_INIT_RAM_LOCK 299 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 300 #ifdef CONFIG_PHYS_64BIT 301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 302 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 303 /* The assembler doesn't like typecast */ 304 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 305 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 306 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 307 #else 308 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 309 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 310 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 311 #endif 312 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 313 314 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 315 GENERATED_GBL_DATA_SIZE) 316 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 317 318 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 319 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 320 321 /* Serial Port - controlled on board with jumper J8 322 * open - index 2 323 * shorted - index 1 324 */ 325 #define CONFIG_CONS_INDEX 1 326 #define CONFIG_SYS_NS16550 327 #define CONFIG_SYS_NS16550_SERIAL 328 #define CONFIG_SYS_NS16550_REG_SIZE 1 329 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 330 331 #define CONFIG_SYS_BAUDRATE_TABLE \ 332 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 333 334 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 335 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 336 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 337 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 338 339 /* Use the HUSH parser */ 340 #define CONFIG_SYS_HUSH_PARSER 341 342 /* pass open firmware flat tree */ 343 #define CONFIG_OF_LIBFDT 344 #define CONFIG_OF_BOARD_SETUP 345 #define CONFIG_OF_STDOUT_VIA_ALIAS 346 347 /* new uImage format support */ 348 #define CONFIG_FIT 349 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 350 351 /* I2C */ 352 #define CONFIG_SYS_I2C 353 #define CONFIG_SYS_I2C_FSL 354 #define CONFIG_SYS_FSL_I2C_SPEED 400000 355 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 356 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 357 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 358 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 359 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 360 361 /* 362 * RapidIO 363 */ 364 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 365 #ifdef CONFIG_PHYS_64BIT 366 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 367 #else 368 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 369 #endif 370 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 371 372 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 373 #ifdef CONFIG_PHYS_64BIT 374 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 375 #else 376 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 377 #endif 378 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 379 380 /* 381 * for slave u-boot IMAGE instored in master memory space, 382 * PHYS must be aligned based on the SIZE 383 */ 384 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 385 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 386 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 387 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 388 /* 389 * for slave UCODE and ENV instored in master memory space, 390 * PHYS must be aligned based on the SIZE 391 */ 392 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 393 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 394 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 395 396 /* slave core release by master*/ 397 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 398 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 399 400 /* 401 * SRIO_PCIE_BOOT - SLAVE 402 */ 403 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 404 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 405 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 406 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 407 #endif 408 409 /* 410 * eSPI - Enhanced SPI 411 */ 412 #define CONFIG_FSL_ESPI 413 #define CONFIG_SPI_FLASH 414 #define CONFIG_SPI_FLASH_SPANSION 415 #define CONFIG_CMD_SF 416 #define CONFIG_SF_DEFAULT_SPEED 10000000 417 #define CONFIG_SF_DEFAULT_MODE 0 418 419 /* 420 * General PCI 421 * Memory space is mapped 1-1, but I/O space must start from 0. 422 */ 423 424 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 425 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 426 #ifdef CONFIG_PHYS_64BIT 427 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 428 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 429 #else 430 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 431 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 432 #endif 433 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 434 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 435 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 436 #ifdef CONFIG_PHYS_64BIT 437 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 438 #else 439 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 440 #endif 441 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 442 443 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 444 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 445 #ifdef CONFIG_PHYS_64BIT 446 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 447 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 448 #else 449 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 450 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 451 #endif 452 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 453 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 454 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 455 #ifdef CONFIG_PHYS_64BIT 456 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 457 #else 458 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 459 #endif 460 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 461 462 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 463 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 464 #ifdef CONFIG_PHYS_64BIT 465 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 466 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 467 #else 468 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 469 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 470 #endif 471 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 472 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 473 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 474 #ifdef CONFIG_PHYS_64BIT 475 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 476 #else 477 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 478 #endif 479 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 480 481 /* Qman/Bman */ 482 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 483 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 484 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 485 #ifdef CONFIG_PHYS_64BIT 486 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 487 #else 488 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 489 #endif 490 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 491 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 492 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 493 #ifdef CONFIG_PHYS_64BIT 494 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 495 #else 496 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 497 #endif 498 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 499 500 #define CONFIG_SYS_DPAA_FMAN 501 #define CONFIG_SYS_DPAA_PME 502 /* Default address of microcode for the Linux Fman driver */ 503 #if defined(CONFIG_SPIFLASH) 504 /* 505 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 506 * env, so we got 0x110000. 507 */ 508 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 509 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 510 #elif defined(CONFIG_SDCARD) 511 /* 512 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 513 * about 825KB (1650 blocks), Env is stored after the image, and the env size is 514 * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. 515 */ 516 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 517 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) 518 #elif defined(CONFIG_NAND) 519 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 520 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 521 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 522 /* 523 * Slave has no ucode locally, it can fetch this from remote. When implementing 524 * in two corenet boards, slave's ucode could be stored in master's memory 525 * space, the address can be mapped from slave TLB->slave LAW-> 526 * slave SRIO or PCIE outbound window->master inbound window-> 527 * master LAW->the ucode address in master's memory space. 528 */ 529 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 530 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 531 #else 532 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 533 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 534 #endif 535 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 536 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 537 538 #ifdef CONFIG_SYS_DPAA_FMAN 539 #define CONFIG_FMAN_ENET 540 #define CONFIG_PHYLIB_10G 541 #define CONFIG_PHY_VITESSE 542 #define CONFIG_PHY_TERANETICS 543 #endif 544 545 #ifdef CONFIG_PCI 546 #define CONFIG_PCI_INDIRECT_BRIDGE 547 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 548 #define CONFIG_E1000 549 550 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 551 #define CONFIG_DOS_PARTITION 552 #endif /* CONFIG_PCI */ 553 554 /* SATA */ 555 #define CONFIG_FSL_SATA_V2 556 557 #ifdef CONFIG_FSL_SATA_V2 558 #define CONFIG_FSL_SATA 559 #define CONFIG_LIBATA 560 561 #define CONFIG_SYS_SATA_MAX_DEVICE 2 562 #define CONFIG_SATA1 563 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 564 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 565 #define CONFIG_SATA2 566 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 567 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 568 569 #define CONFIG_LBA48 570 #define CONFIG_CMD_SATA 571 #define CONFIG_DOS_PARTITION 572 #define CONFIG_CMD_EXT2 573 #endif 574 575 #ifdef CONFIG_FMAN_ENET 576 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 577 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 578 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 579 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 580 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 581 582 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 583 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 584 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 585 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 586 587 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 588 589 #define CONFIG_SYS_TBIPA_VALUE 8 590 #define CONFIG_MII /* MII PHY management */ 591 #define CONFIG_ETHPRIME "FM1@DTSEC1" 592 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 593 #endif 594 595 /* 596 * Environment 597 */ 598 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 599 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 600 601 /* 602 * Command line configuration. 603 */ 604 #include <config_cmd_default.h> 605 606 #define CONFIG_CMD_DHCP 607 #define CONFIG_CMD_ELF 608 #define CONFIG_CMD_ERRATA 609 #define CONFIG_CMD_GREPENV 610 #define CONFIG_CMD_IRQ 611 #define CONFIG_CMD_I2C 612 #define CONFIG_CMD_MII 613 #define CONFIG_CMD_PING 614 #define CONFIG_CMD_SETEXPR 615 616 #ifdef CONFIG_PCI 617 #define CONFIG_CMD_PCI 618 #define CONFIG_CMD_NET 619 #endif 620 621 /* 622 * USB 623 */ 624 #define CONFIG_HAS_FSL_DR_USB 625 #define CONFIG_HAS_FSL_MPH_USB 626 627 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) 628 #define CONFIG_CMD_USB 629 #define CONFIG_USB_STORAGE 630 #define CONFIG_USB_EHCI 631 #define CONFIG_USB_EHCI_FSL 632 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 633 #endif 634 635 #define CONFIG_CMD_EXT2 636 637 #define CONFIG_MMC 638 639 #ifdef CONFIG_MMC 640 #define CONFIG_FSL_ESDHC 641 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 642 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 643 #define CONFIG_CMD_MMC 644 #define CONFIG_GENERIC_MMC 645 #define CONFIG_CMD_EXT2 646 #define CONFIG_CMD_FAT 647 #define CONFIG_DOS_PARTITION 648 #endif 649 650 /* 651 * Miscellaneous configurable options 652 */ 653 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 654 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 655 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 656 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 657 #ifdef CONFIG_CMD_KGDB 658 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 659 #else 660 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 661 #endif 662 /* Print Buffer Size */ 663 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 664 sizeof(CONFIG_SYS_PROMPT)+16) 665 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 666 /* Boot Argument Buffer Size */ 667 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 668 669 /* 670 * For booting Linux, the board info and command line data 671 * have to be in the first 64 MB of memory, since this is 672 * the maximum mapped by the Linux kernel during initialization. 673 */ 674 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ 675 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 676 677 #ifdef CONFIG_CMD_KGDB 678 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 679 #endif 680 681 /* 682 * Environment Configuration 683 */ 684 #define CONFIG_ROOTPATH "/opt/nfsroot" 685 #define CONFIG_BOOTFILE "uImage" 686 #define CONFIG_UBOOTPATH u-boot.bin 687 688 /* default location for tftp and bootm */ 689 #define CONFIG_LOADADDR 1000000 690 691 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 692 693 #define CONFIG_BAUDRATE 115200 694 695 #define __USB_PHY_TYPE utmi 696 697 #define CONFIG_EXTRA_ENV_SETTINGS \ 698 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 699 "bank_intlv=cs0_cs1\0" \ 700 "netdev=eth0\0" \ 701 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 702 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 703 "tftpflash=tftpboot $loadaddr $uboot && " \ 704 "protect off $ubootaddr +$filesize && " \ 705 "erase $ubootaddr +$filesize && " \ 706 "cp.b $loadaddr $ubootaddr $filesize && " \ 707 "protect on $ubootaddr +$filesize && " \ 708 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 709 "consoledev=ttyS0\0" \ 710 "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 711 "usb_dr_mode=host\0" \ 712 "ramdiskaddr=2000000\0" \ 713 "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ 714 "fdtaddr=c00000\0" \ 715 "fdtfile=p2041rdb/p2041rdb.dtb\0" \ 716 "bdev=sda3\0" 717 718 #define CONFIG_HDBOOT \ 719 "setenv bootargs root=/dev/$bdev rw " \ 720 "console=$consoledev,$baudrate $othbootargs;" \ 721 "tftp $loadaddr $bootfile;" \ 722 "tftp $fdtaddr $fdtfile;" \ 723 "bootm $loadaddr - $fdtaddr" 724 725 #define CONFIG_NFSBOOTCOMMAND \ 726 "setenv bootargs root=/dev/nfs rw " \ 727 "nfsroot=$serverip:$rootpath " \ 728 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 729 "console=$consoledev,$baudrate $othbootargs;" \ 730 "tftp $loadaddr $bootfile;" \ 731 "tftp $fdtaddr $fdtfile;" \ 732 "bootm $loadaddr - $fdtaddr" 733 734 #define CONFIG_RAMBOOTCOMMAND \ 735 "setenv bootargs root=/dev/ram rw " \ 736 "console=$consoledev,$baudrate $othbootargs;" \ 737 "tftp $ramdiskaddr $ramdiskfile;" \ 738 "tftp $loadaddr $bootfile;" \ 739 "tftp $fdtaddr $fdtfile;" \ 740 "bootm $loadaddr $ramdiskaddr $fdtaddr" 741 742 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 743 744 #include <asm/fsl_secure_boot.h> 745 746 #endif /* __CONFIG_H */ 747