1 /* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * P2041 RDB board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #define CONFIG_P2041RDB 31 #define CONFIG_PHYS_64BIT 32 #define CONFIG_PPC_P2041 33 34 #ifdef CONFIG_RAMBOOT_PBL 35 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 36 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 37 #endif 38 39 /* High Level Configuration Options */ 40 #define CONFIG_BOOKE 41 #define CONFIG_E500 /* BOOKE e500 family */ 42 #define CONFIG_E500MC /* BOOKE e500mc family */ 43 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 44 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 45 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 46 #define CONFIG_MP /* support multiple processors */ 47 48 #ifndef CONFIG_SYS_TEXT_BASE 49 #define CONFIG_SYS_TEXT_BASE 0xeff80000 50 #endif 51 52 #ifndef CONFIG_RESET_VECTOR_ADDRESS 53 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 54 #endif 55 56 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 57 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 58 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 59 #define CONFIG_PCI /* Enable PCI/PCIE */ 60 #define CONFIG_PCIE1 /* PCIE controler 1 */ 61 #define CONFIG_PCIE2 /* PCIE controler 2 */ 62 #define CONFIG_PCIE3 /* PCIE controler 3 */ 63 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 64 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 65 66 #define CONFIG_SYS_SRIO 67 #define CONFIG_SRIO1 /* SRIO port 1 */ 68 #define CONFIG_SRIO2 /* SRIO port 2 */ 69 #define CONFIG_SYS_DPAA_RMAN /* RMan */ 70 71 #define CONFIG_FSL_LAW /* Use common FSL init code */ 72 73 #define CONFIG_ENV_OVERWRITE 74 75 #ifdef CONFIG_SYS_NO_FLASH 76 #define CONFIG_ENV_IS_NOWHERE 77 #else 78 #define CONFIG_FLASH_CFI_DRIVER 79 #define CONFIG_SYS_FLASH_CFI 80 #endif 81 82 #if defined(CONFIG_SPIFLASH) 83 #define CONFIG_SYS_EXTRA_ENV_RELOC 84 #define CONFIG_ENV_IS_IN_SPI_FLASH 85 #define CONFIG_ENV_SPI_BUS 0 86 #define CONFIG_ENV_SPI_CS 0 87 #define CONFIG_ENV_SPI_MAX_HZ 10000000 88 #define CONFIG_ENV_SPI_MODE 0 89 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 90 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 91 #define CONFIG_ENV_SECT_SIZE 0x10000 92 #elif defined(CONFIG_SDCARD) 93 #define CONFIG_SYS_EXTRA_ENV_RELOC 94 #define CONFIG_ENV_IS_IN_MMC 95 #define CONFIG_SYS_MMC_ENV_DEV 0 96 #define CONFIG_ENV_SIZE 0x2000 97 #define CONFIG_ENV_OFFSET (512 * 1097) 98 #else 99 #define CONFIG_ENV_IS_IN_FLASH 100 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ 101 - CONFIG_ENV_SECT_SIZE) 102 #define CONFIG_ENV_SIZE 0x2000 103 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 104 #endif 105 106 #ifndef __ASSEMBLY__ 107 unsigned long get_board_sys_clk(unsigned long dummy); 108 #endif 109 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 110 111 /* 112 * These can be toggled for performance analysis, otherwise use default. 113 */ 114 #define CONFIG_SYS_CACHE_STASHING 115 #define CONFIG_BACKSIDE_L2_CACHE 116 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 117 #define CONFIG_BTB /* toggle branch predition */ 118 119 #define CONFIG_ENABLE_36BIT_PHYS 120 121 #ifdef CONFIG_PHYS_64BIT 122 #define CONFIG_ADDR_MAP 123 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 124 #endif 125 126 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 127 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 128 #define CONFIG_SYS_MEMTEST_END 0x00400000 129 #define CONFIG_SYS_ALT_MEMTEST 130 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 131 132 /* 133 * Config the L3 Cache as L3 SRAM 134 */ 135 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 136 #ifdef CONFIG_PHYS_64BIT 137 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ 138 CONFIG_RAMBOOT_TEXT_BASE) 139 #else 140 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 141 #endif 142 #define CONFIG_SYS_L3_SIZE (1024 << 10) 143 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 144 145 #ifdef CONFIG_PHYS_64BIT 146 #define CONFIG_SYS_DCSRBAR 0xf0000000 147 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 148 #endif 149 150 /* EEPROM */ 151 #define CONFIG_ID_EEPROM 152 #define CONFIG_SYS_I2C_EEPROM_NXID 153 #define CONFIG_SYS_EEPROM_BUS_NUM 0 154 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 155 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 156 157 /* 158 * DDR Setup 159 */ 160 #define CONFIG_VERY_BIG_RAM 161 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 162 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 163 164 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 165 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 166 167 #define CONFIG_DDR_SPD 168 #define CONFIG_FSL_DDR3 169 170 #define CONFIG_SYS_SPD_BUS_NUM 0 171 #define SPD_EEPROM_ADDRESS 0x52 172 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 173 174 /* 175 * Local Bus Definitions 176 */ 177 178 /* Set the local bus clock 1/8 of platform clock */ 179 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 180 181 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* Start of PromJet */ 182 #ifdef CONFIG_PHYS_64BIT 183 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull 184 #else 185 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 186 #endif 187 188 #define CONFIG_SYS_BR0_PRELIM \ 189 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 190 #define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 191 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 192 193 #define CONFIG_FSL_CPLD 194 #define CPLD_BASE 0xffdf0000 /* CPLD registers */ 195 #ifdef CONFIG_PHYS_64BIT 196 #define CPLD_BASE_PHYS 0xfffdf0000ull 197 #else 198 #define CPLD_BASE_PHYS CPLD_BASE 199 #endif 200 201 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) 202 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 203 204 #define PIXIS_LBMAP_SWITCH 7 205 #define PIXIS_LBMAP_MASK 0xf0 206 #define PIXIS_LBMAP_SHIFT 4 207 #define PIXIS_LBMAP_ALTBANK 0x40 208 209 #define CONFIG_SYS_FLASH_QUIET_TEST 210 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 211 212 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 213 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 214 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ 215 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ 216 217 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 218 219 #if defined(CONFIG_RAMBOOT_PBL) 220 #define CONFIG_SYS_RAMBOOT 221 #endif 222 223 #define CONFIG_SYS_FLASH_EMPTY_INFO 224 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 225 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 226 227 #define CONFIG_BOARD_EARLY_INIT_F 228 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 229 #define CONFIG_MISC_INIT_R 230 231 #define CONFIG_HWCONFIG 232 233 /* define to use L1 as initial stack */ 234 #define CONFIG_L1_INIT_RAM 235 #define CONFIG_SYS_INIT_RAM_LOCK 236 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 237 #ifdef CONFIG_PHYS_64BIT 238 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 239 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 240 /* The assembler doesn't like typecast */ 241 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 242 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 243 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 244 #else 245 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 246 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 247 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 248 #endif 249 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 250 251 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 252 GENERATED_GBL_DATA_SIZE) 253 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 254 255 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 256 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 257 258 /* Serial Port - controlled on board with jumper J8 259 * open - index 2 260 * shorted - index 1 261 */ 262 #define CONFIG_CONS_INDEX 1 263 #define CONFIG_SYS_NS16550 264 #define CONFIG_SYS_NS16550_SERIAL 265 #define CONFIG_SYS_NS16550_REG_SIZE 1 266 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 267 268 #define CONFIG_SYS_BAUDRATE_TABLE \ 269 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 270 271 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 272 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 273 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 274 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 275 276 /* Use the HUSH parser */ 277 #define CONFIG_SYS_HUSH_PARSER 278 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 279 280 /* pass open firmware flat tree */ 281 #define CONFIG_OF_LIBFDT 282 #define CONFIG_OF_BOARD_SETUP 283 #define CONFIG_OF_STDOUT_VIA_ALIAS 284 285 /* new uImage format support */ 286 #define CONFIG_FIT 287 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 288 289 /* I2C */ 290 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 291 #define CONFIG_HARD_I2C /* I2C with hardware support */ 292 #define CONFIG_I2C_MULTI_BUS 293 #define CONFIG_I2C_CMD_TREE 294 #define CONFIG_SYS_I2C_SPEED 400000 295 #define CONFIG_SYS_I2C_SLAVE 0x7F 296 #define CONFIG_SYS_I2C_OFFSET 0x118000 297 #define CONFIG_SYS_I2C2_OFFSET 0x118100 298 299 /* 300 * RapidIO 301 */ 302 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 303 #ifdef CONFIG_PHYS_64BIT 304 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 305 #else 306 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 307 #endif 308 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 309 310 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 311 #ifdef CONFIG_PHYS_64BIT 312 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 313 #else 314 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 315 #endif 316 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 317 318 /* 319 * eSPI - Enhanced SPI 320 */ 321 #define CONFIG_FSL_ESPI 322 #define CONFIG_SPI_FLASH 323 #define CONFIG_SPI_FLASH_SPANSION 324 #define CONFIG_CMD_SF 325 #define CONFIG_SF_DEFAULT_SPEED 10000000 326 #define CONFIG_SF_DEFAULT_MODE 0 327 328 /* 329 * General PCI 330 * Memory space is mapped 1-1, but I/O space must start from 0. 331 */ 332 333 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 334 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 335 #ifdef CONFIG_PHYS_64BIT 336 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 337 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 338 #else 339 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 340 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 341 #endif 342 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 343 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 344 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 345 #ifdef CONFIG_PHYS_64BIT 346 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 347 #else 348 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 349 #endif 350 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 351 352 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 353 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 354 #ifdef CONFIG_PHYS_64BIT 355 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 356 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 357 #else 358 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 359 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 360 #endif 361 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 362 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 363 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 364 #ifdef CONFIG_PHYS_64BIT 365 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 366 #else 367 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 368 #endif 369 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 370 371 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 372 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 373 #ifdef CONFIG_PHYS_64BIT 374 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 375 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 376 #else 377 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 378 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 379 #endif 380 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 381 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 382 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 383 #ifdef CONFIG_PHYS_64BIT 384 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 385 #else 386 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 387 #endif 388 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 389 390 /* Qman/Bman */ 391 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 392 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 393 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 394 #ifdef CONFIG_PHYS_64BIT 395 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 396 #else 397 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 398 #endif 399 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 400 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 401 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 402 #ifdef CONFIG_PHYS_64BIT 403 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 404 #else 405 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 406 #endif 407 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 408 409 #define CONFIG_SYS_DPAA_FMAN 410 #define CONFIG_SYS_DPAA_PME 411 /* Default address of microcode for the Linux Fman driver */ 412 #if defined(CONFIG_SPIFLASH) 413 /* 414 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 415 * env, so we got 0x110000. 416 */ 417 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 0x110000 418 #elif defined(CONFIG_SDCARD) 419 /* 420 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 421 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 422 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 423 */ 424 #define CONFIG_SYS_QE_FW_IN_MMC (512 * 1130) 425 #elif defined(CONFIG_NAND) 426 #define CONFIG_SYS_QE_FW_IN_NAND (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 427 #else 428 #define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000 429 #endif 430 #define CONFIG_SYS_FMAN_FW_LENGTH 0x10000 431 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_FMAN_FW_LENGTH) 432 433 #ifdef CONFIG_SYS_DPAA_FMAN 434 #define CONFIG_FMAN_ENET 435 #define CONFIG_PHYLIB_10G 436 #define CONFIG_PHY_VITESSE 437 #define CONFIG_PHY_TERANETICS 438 #endif 439 440 #ifdef CONFIG_PCI 441 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 442 #define CONFIG_E1000 443 444 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 445 #define CONFIG_DOS_PARTITION 446 #endif /* CONFIG_PCI */ 447 448 /* SATA */ 449 #define CONFIG_FSL_SATA_V2 450 #ifdef CONFIG_FSL_SATA_V2 451 #define CONFIG_LIBATA 452 #define CONFIG_FSL_SATA 453 454 #define CONFIG_SYS_SATA_MAX_DEVICE 2 455 #define CONFIG_SATA1 456 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 457 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 458 #define CONFIG_SATA2 459 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 460 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 461 462 #define CONFIG_LBA48 463 #define CONFIG_CMD_SATA 464 #define CONFIG_DOS_PARTITION 465 #define CONFIG_CMD_EXT2 466 #endif 467 468 #ifdef CONFIG_FMAN_ENET 469 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 470 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 471 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 472 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 473 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 474 475 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 476 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 477 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 478 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 479 480 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 481 482 #define CONFIG_SYS_TBIPA_VALUE 8 483 #define CONFIG_MII /* MII PHY management */ 484 #define CONFIG_ETHPRIME "FM1@DTSEC1" 485 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 486 #endif 487 488 /* 489 * Environment 490 */ 491 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 492 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 493 494 /* 495 * Command line configuration. 496 */ 497 #include <config_cmd_default.h> 498 499 #define CONFIG_CMD_DHCP 500 #define CONFIG_CMD_ELF 501 #define CONFIG_CMD_ERRATA 502 #define CONFIG_CMD_GREPENV 503 #define CONFIG_CMD_IRQ 504 #define CONFIG_CMD_I2C 505 #define CONFIG_CMD_MII 506 #define CONFIG_CMD_PING 507 #define CONFIG_CMD_SETEXPR 508 509 #ifdef CONFIG_PCI 510 #define CONFIG_CMD_PCI 511 #define CONFIG_CMD_NET 512 #endif 513 514 /* 515 * USB 516 */ 517 #define CONFIG_CMD_USB 518 #define CONFIG_USB_STORAGE 519 #define CONFIG_USB_EHCI 520 #define CONFIG_USB_EHCI_FSL 521 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 522 #define CONFIG_CMD_EXT2 523 524 #define CONFIG_MMC 525 526 #ifdef CONFIG_MMC 527 #define CONFIG_FSL_ESDHC 528 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 529 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 530 #define CONFIG_CMD_MMC 531 #define CONFIG_GENERIC_MMC 532 #define CONFIG_CMD_EXT2 533 #define CONFIG_CMD_FAT 534 #define CONFIG_DOS_PARTITION 535 #endif 536 537 /* 538 * Miscellaneous configurable options 539 */ 540 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 541 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 542 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 543 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 544 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 545 #ifdef CONFIG_CMD_KGDB 546 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 547 #else 548 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 549 #endif 550 /* Print Buffer Size */ 551 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 552 sizeof(CONFIG_SYS_PROMPT)+16) 553 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 554 /* Boot Argument Buffer Size */ 555 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 556 #define CONFIG_SYS_HZ 1000 /* decrementer freq 1ms ticks */ 557 558 /* 559 * For booting Linux, the board info and command line data 560 * have to be in the first 64 MB of memory, since this is 561 * the maximum mapped by the Linux kernel during initialization. 562 */ 563 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ 564 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 565 566 #ifdef CONFIG_CMD_KGDB 567 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 568 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 569 #endif 570 571 /* 572 * Environment Configuration 573 */ 574 #define CONFIG_ROOTPATH "/opt/nfsroot" 575 #define CONFIG_BOOTFILE "uImage" 576 #define CONFIG_UBOOTPATH u-boot.bin 577 578 /* default location for tftp and bootm */ 579 #define CONFIG_LOADADDR 1000000 580 581 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 582 583 #define CONFIG_BAUDRATE 115200 584 585 #define __USB_PHY_TYPE utmi 586 587 #define CONFIG_EXTRA_ENV_SETTINGS \ 588 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 589 "bank_intlv=cs0_cs1\0" \ 590 "netdev=eth0\0" \ 591 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 592 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ 593 "tftpflash=tftpboot $loadaddr $uboot && " \ 594 "protect off $ubootaddr +$filesize && " \ 595 "erase $ubootaddr +$filesize && " \ 596 "cp.b $loadaddr $ubootaddr $filesize && " \ 597 "protect on $ubootaddr +$filesize && " \ 598 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 599 "consoledev=ttyS0\0" \ 600 "usb_phy_type=" MK_STR(__USB_PHY_TYPE) "\0" \ 601 "usb_dr_mode=host\0" \ 602 "ramdiskaddr=2000000\0" \ 603 "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ 604 "fdtaddr=c00000\0" \ 605 "fdtfile=p2041rdb/p2041rdb.dtb\0" \ 606 "bdev=sda3\0" \ 607 "c=ffe\0" 608 609 #define CONFIG_HDBOOT \ 610 "setenv bootargs root=/dev/$bdev rw " \ 611 "console=$consoledev,$baudrate $othbootargs;" \ 612 "tftp $loadaddr $bootfile;" \ 613 "tftp $fdtaddr $fdtfile;" \ 614 "bootm $loadaddr - $fdtaddr" 615 616 #define CONFIG_NFSBOOTCOMMAND \ 617 "setenv bootargs root=/dev/nfs rw " \ 618 "nfsroot=$serverip:$rootpath " \ 619 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 620 "console=$consoledev,$baudrate $othbootargs;" \ 621 "tftp $loadaddr $bootfile;" \ 622 "tftp $fdtaddr $fdtfile;" \ 623 "bootm $loadaddr - $fdtaddr" 624 625 #define CONFIG_RAMBOOTCOMMAND \ 626 "setenv bootargs root=/dev/ram rw " \ 627 "console=$consoledev,$baudrate $othbootargs;" \ 628 "tftp $ramdiskaddr $ramdiskfile;" \ 629 "tftp $loadaddr $bootfile;" \ 630 "tftp $fdtaddr $fdtfile;" \ 631 "bootm $loadaddr $ramdiskaddr $fdtaddr" 632 633 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 634 635 #ifdef CONFIG_SECURE_BOOT 636 #include <asm/fsl_secure_boot.h> 637 #endif 638 639 #endif /* __CONFIG_H */ 640