1 /* 2 * Copyright 2010-2012 Freescale Semiconductor, Inc. 3 * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> 4 * Timur Tabi <timur@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "../board/freescale/common/ics307_clk.h" 13 14 #define CONFIG_SYS_GENERIC_BOARD 15 #define CONFIG_DISPLAY_BOARDINFO 16 17 #ifdef CONFIG_36BIT 18 #define CONFIG_PHYS_64BIT 19 #endif 20 21 #ifdef CONFIG_SDCARD 22 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 23 #define CONFIG_SPL_ENV_SUPPORT 24 #define CONFIG_SPL_SERIAL_SUPPORT 25 #define CONFIG_SPL_MMC_SUPPORT 26 #define CONFIG_SPL_MMC_MINIMAL 27 #define CONFIG_SPL_FLUSH_IMAGE 28 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 29 #define CONFIG_SPL_LIBGENERIC_SUPPORT 30 #define CONFIG_SPL_LIBCOMMON_SUPPORT 31 #define CONFIG_SPL_I2C_SUPPORT 32 #define CONFIG_FSL_LAW /* Use common FSL init code */ 33 #define CONFIG_SYS_TEXT_BASE 0x11001000 34 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 35 #define CONFIG_SPL_PAD_TO 0x20000 36 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 37 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 38 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 39 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 40 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 41 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 42 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 43 #define CONFIG_SPL_MMC_BOOT 44 #ifdef CONFIG_SPL_BUILD 45 #define CONFIG_SPL_COMMON_INIT_DDR 46 #endif 47 #endif 48 49 #ifdef CONFIG_SPIFLASH 50 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 51 #define CONFIG_SPL_ENV_SUPPORT 52 #define CONFIG_SPL_SERIAL_SUPPORT 53 #define CONFIG_SPL_SPI_SUPPORT 54 #define CONFIG_SPL_SPI_FLASH_SUPPORT 55 #define CONFIG_SPL_SPI_FLASH_MINIMAL 56 #define CONFIG_SPL_FLUSH_IMAGE 57 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 58 #define CONFIG_SPL_LIBGENERIC_SUPPORT 59 #define CONFIG_SPL_LIBCOMMON_SUPPORT 60 #define CONFIG_SPL_I2C_SUPPORT 61 #define CONFIG_FSL_LAW /* Use common FSL init code */ 62 #define CONFIG_SYS_TEXT_BASE 0x11001000 63 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 64 #define CONFIG_SPL_PAD_TO 0x20000 65 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 70 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 71 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 72 #define CONFIG_SPL_SPI_BOOT 73 #ifdef CONFIG_SPL_BUILD 74 #define CONFIG_SPL_COMMON_INIT_DDR 75 #endif 76 #endif 77 78 #define CONFIG_NAND_FSL_ELBC 79 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 80 #define CONFIG_SYS_NAND_MAX_OOBFREE 5 81 82 #ifdef CONFIG_NAND 83 #ifdef CONFIG_TPL_BUILD 84 #define CONFIG_SPL_NAND_BOOT 85 #define CONFIG_SPL_FLUSH_IMAGE 86 #define CONFIG_SPL_ENV_SUPPORT 87 #define CONFIG_SPL_NAND_INIT 88 #define CONFIG_SPL_SERIAL_SUPPORT 89 #define CONFIG_SPL_LIBGENERIC_SUPPORT 90 #define CONFIG_SPL_LIBCOMMON_SUPPORT 91 #define CONFIG_SPL_I2C_SUPPORT 92 #define CONFIG_SPL_NAND_SUPPORT 93 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 94 #define CONFIG_SPL_COMMON_INIT_DDR 95 #define CONFIG_SPL_MAX_SIZE (128 << 10) 96 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 97 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 98 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 99 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 100 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 101 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 102 #elif defined(CONFIG_SPL_BUILD) 103 #define CONFIG_SPL_INIT_MINIMAL 104 #define CONFIG_SPL_SERIAL_SUPPORT 105 #define CONFIG_SPL_NAND_SUPPORT 106 #define CONFIG_SPL_FLUSH_IMAGE 107 #define CONFIG_SPL_TEXT_BASE 0xff800000 108 #define CONFIG_SPL_MAX_SIZE 4096 109 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 110 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 111 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 112 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 113 #endif 114 #define CONFIG_SPL_PAD_TO 0x20000 115 #define CONFIG_TPL_PAD_TO 0x20000 116 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 117 #define CONFIG_SYS_TEXT_BASE 0x11001000 118 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 119 #endif 120 121 /* High Level Configuration Options */ 122 #define CONFIG_BOOKE /* BOOKE */ 123 #define CONFIG_E500 /* BOOKE e500 family */ 124 #define CONFIG_P1022 125 #define CONFIG_P1022DS 126 #define CONFIG_MP /* support multiple processors */ 127 128 #ifndef CONFIG_SYS_TEXT_BASE 129 #define CONFIG_SYS_TEXT_BASE 0xeff40000 130 #endif 131 132 #ifndef CONFIG_RESET_VECTOR_ADDRESS 133 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 134 #endif 135 136 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 137 #define CONFIG_PCI /* Enable PCI/PCIE */ 138 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 139 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 140 #define CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */ 141 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 142 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 143 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 144 145 #define CONFIG_ENABLE_36BIT_PHYS 146 147 #ifdef CONFIG_PHYS_64BIT 148 #define CONFIG_ADDR_MAP 149 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 150 #endif 151 152 #define CONFIG_FSL_LAW /* Use common FSL init code */ 153 154 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 155 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 156 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 157 158 /* 159 * These can be toggled for performance analysis, otherwise use default. 160 */ 161 #define CONFIG_L2_CACHE 162 #define CONFIG_BTB 163 164 #define CONFIG_SYS_MEMTEST_START 0x00000000 165 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 166 167 #define CONFIG_SYS_CCSRBAR 0xffe00000 168 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 169 170 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 171 SPL code*/ 172 #ifdef CONFIG_SPL_BUILD 173 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 174 #endif 175 176 177 /* DDR Setup */ 178 #define CONFIG_DDR_SPD 179 #define CONFIG_VERY_BIG_RAM 180 #define CONFIG_SYS_FSL_DDR3 181 182 #ifdef CONFIG_DDR_ECC 183 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 184 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 185 #endif 186 187 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 188 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 189 190 #define CONFIG_NUM_DDR_CONTROLLERS 1 191 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 192 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 193 194 /* I2C addresses of SPD EEPROMs */ 195 #define CONFIG_SYS_SPD_BUS_NUM 1 196 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 197 198 /* These are used when DDR doesn't use SPD. */ 199 #define CONFIG_SYS_SDRAM_SIZE 2048 200 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 201 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 202 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 203 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F 204 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 205 #define CONFIG_SYS_DDR_TIMING_3 0x00010000 206 #define CONFIG_SYS_DDR_TIMING_0 0x40110104 207 #define CONFIG_SYS_DDR_TIMING_1 0x5c5bd746 208 #define CONFIG_SYS_DDR_TIMING_2 0x0fa8d4ca 209 #define CONFIG_SYS_DDR_MODE_1 0x00441221 210 #define CONFIG_SYS_DDR_MODE_2 0x00000000 211 #define CONFIG_SYS_DDR_INTERVAL 0x0a280100 212 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 213 #define CONFIG_SYS_DDR_CLK_CTRL 0x02800000 214 #define CONFIG_SYS_DDR_CONTROL 0xc7000008 215 #define CONFIG_SYS_DDR_CONTROL_2 0x24401041 216 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 217 #define CONFIG_SYS_DDR_TIMING_5 0x02401400 218 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 219 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608 220 221 222 /* 223 * Memory map 224 * 225 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 226 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable 227 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 228 * 229 * Localbus cacheable (TBD) 230 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 231 * 232 * Localbus non-cacheable 233 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 234 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 235 * 0xff80_0000 0xff80_7fff NAND 32K non-cacheable 236 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 237 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 238 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 239 */ 240 241 /* 242 * Local Bus Definitions 243 */ 244 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* start of FLASH 128M */ 245 #ifdef CONFIG_PHYS_64BIT 246 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull 247 #else 248 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 249 #endif 250 251 #define CONFIG_FLASH_BR_PRELIM \ 252 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 253 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) 254 255 #ifdef CONFIG_NAND 256 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 257 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 258 #else 259 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 260 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 261 #endif 262 263 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 264 #define CONFIG_SYS_FLASH_QUIET_TEST 265 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 266 267 #define CONFIG_SYS_MAX_FLASH_BANKS 1 268 #define CONFIG_SYS_MAX_FLASH_SECT 1024 269 270 #ifndef CONFIG_SYS_MONITOR_BASE 271 #ifdef CONFIG_SPL_BUILD 272 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 273 #else 274 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 275 #endif 276 #endif 277 278 #define CONFIG_FLASH_CFI_DRIVER 279 #define CONFIG_SYS_FLASH_CFI 280 #define CONFIG_SYS_FLASH_EMPTY_INFO 281 282 /* Nand Flash */ 283 #if defined(CONFIG_NAND_FSL_ELBC) 284 #define CONFIG_SYS_NAND_BASE 0xff800000 285 #ifdef CONFIG_PHYS_64BIT 286 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 287 #else 288 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 289 #endif 290 291 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 292 #define CONFIG_SYS_MAX_NAND_DEVICE 1 293 #define CONFIG_CMD_NAND 1 294 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) 295 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE 296 297 /* NAND flash config */ 298 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 299 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 300 | BR_PS_8 /* Port Size = 8 bit */ \ 301 | BR_MS_FCM /* MSEL = FCM */ \ 302 | BR_V) /* valid */ 303 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* length 256K */ \ 304 | OR_FCM_PGS /* Large Page*/ \ 305 | OR_FCM_CSCT \ 306 | OR_FCM_CST \ 307 | OR_FCM_CHT \ 308 | OR_FCM_SCY_1 \ 309 | OR_FCM_TRLX \ 310 | OR_FCM_EHTR) 311 #ifdef CONFIG_NAND 312 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 313 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 314 #else 315 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 316 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 317 #endif 318 319 #endif /* CONFIG_NAND_FSL_ELBC */ 320 321 #define CONFIG_BOARD_EARLY_INIT_F 322 #define CONFIG_BOARD_EARLY_INIT_R 323 #define CONFIG_MISC_INIT_R 324 #define CONFIG_HWCONFIG 325 326 #define CONFIG_FSL_NGPIXIS 327 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 328 #ifdef CONFIG_PHYS_64BIT 329 #define PIXIS_BASE_PHYS 0xfffdf0000ull 330 #else 331 #define PIXIS_BASE_PHYS PIXIS_BASE 332 #endif 333 334 #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 335 #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) 336 337 #define PIXIS_LBMAP_SWITCH 7 338 #define PIXIS_LBMAP_MASK 0xF0 339 #define PIXIS_LBMAP_ALTBANK 0x20 340 #define PIXIS_SPD 0x07 341 #define PIXIS_SPD_SYSCLK_MASK 0x07 342 #define PIXIS_ELBC_SPI_MASK 0xc0 343 #define PIXIS_SPI 0x80 344 345 #define CONFIG_SYS_INIT_RAM_LOCK 346 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 347 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 348 349 #define CONFIG_SYS_GBL_DATA_OFFSET \ 350 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 351 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 352 353 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 354 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 355 356 /* 357 * Config the L2 Cache as L2 SRAM 358 */ 359 #if defined(CONFIG_SPL_BUILD) 360 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 361 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 362 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 363 #define CONFIG_SYS_L2_SIZE (256 << 10) 364 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 365 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 366 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 367 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 368 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 369 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 370 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 371 #elif defined(CONFIG_NAND) 372 #ifdef CONFIG_TPL_BUILD 373 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 374 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 375 #define CONFIG_SYS_L2_SIZE (256 << 10) 376 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 377 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 378 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 379 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 380 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 381 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 382 #else 383 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 384 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 385 #define CONFIG_SYS_L2_SIZE (256 << 10) 386 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 387 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 388 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 389 #endif 390 #endif 391 #endif 392 393 /* 394 * Serial Port 395 */ 396 #define CONFIG_CONS_INDEX 1 397 #define CONFIG_SYS_NS16550 398 #define CONFIG_SYS_NS16550_SERIAL 399 #define CONFIG_SYS_NS16550_REG_SIZE 1 400 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 401 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 402 #define CONFIG_NS16550_MIN_FUNCTIONS 403 #endif 404 405 #define CONFIG_SYS_BAUDRATE_TABLE \ 406 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 407 408 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 409 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 410 411 /* Use the HUSH parser */ 412 #define CONFIG_SYS_HUSH_PARSER 413 414 /* Video */ 415 416 #ifdef CONFIG_FSL_DIU_FB 417 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 418 #define CONFIG_VIDEO 419 #define CONFIG_CMD_BMP 420 #define CONFIG_CFB_CONSOLE 421 #define CONFIG_VIDEO_SW_CURSOR 422 #define CONFIG_VGA_AS_SINGLE_DEVICE 423 #define CONFIG_VIDEO_LOGO 424 #define CONFIG_VIDEO_BMP_LOGO 425 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 426 /* 427 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 428 * disable empty flash sector detection, which is I/O-intensive. 429 */ 430 #undef CONFIG_SYS_FLASH_EMPTY_INFO 431 #endif 432 433 #ifndef CONFIG_FSL_DIU_FB 434 #endif 435 436 #ifdef CONFIG_ATI 437 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 438 #define CONFIG_VIDEO 439 #define CONFIG_BIOSEMU 440 #define CONFIG_VIDEO_SW_CURSOR 441 #define CONFIG_ATI_RADEON_FB 442 #define CONFIG_VIDEO_LOGO 443 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 444 #define CONFIG_CFB_CONSOLE 445 #define CONFIG_VGA_AS_SINGLE_DEVICE 446 #endif 447 448 /* 449 * Pass open firmware flat tree 450 */ 451 #define CONFIG_OF_LIBFDT 452 #define CONFIG_OF_BOARD_SETUP 453 #define CONFIG_OF_STDOUT_VIA_ALIAS 454 455 /* new uImage format support */ 456 #define CONFIG_FIT 457 #define CONFIG_FIT_VERBOSE 458 459 /* I2C */ 460 #define CONFIG_SYS_I2C 461 #define CONFIG_SYS_I2C_FSL 462 #define CONFIG_SYS_FSL_I2C_SPEED 400000 463 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 464 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 465 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 466 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 467 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 468 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} 469 470 /* 471 * I2C2 EEPROM 472 */ 473 #define CONFIG_ID_EEPROM 474 #define CONFIG_SYS_I2C_EEPROM_NXID 475 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 476 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 477 #define CONFIG_SYS_EEPROM_BUS_NUM 1 478 479 /* 480 * eSPI - Enhanced SPI 481 */ 482 #define CONFIG_SPI_FLASH 483 #define CONFIG_SPI_FLASH_SPANSION 484 485 #define CONFIG_HARD_SPI 486 #define CONFIG_FSL_ESPI 487 488 #define CONFIG_CMD_SF 489 #define CONFIG_SF_DEFAULT_SPEED 10000000 490 #define CONFIG_SF_DEFAULT_MODE 0 491 492 /* 493 * General PCI 494 * Memory space is mapped 1-1, but I/O space must start from 0. 495 */ 496 497 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 498 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 499 #ifdef CONFIG_PHYS_64BIT 500 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 501 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 502 #else 503 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 504 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 505 #endif 506 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 507 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 508 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 509 #ifdef CONFIG_PHYS_64BIT 510 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 511 #else 512 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 513 #endif 514 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 515 516 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 517 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 518 #ifdef CONFIG_PHYS_64BIT 519 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 520 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 521 #else 522 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 523 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 524 #endif 525 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 526 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 527 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 528 #ifdef CONFIG_PHYS_64BIT 529 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 530 #else 531 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 532 #endif 533 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 534 535 /* controller 3, Slot 1, tgtid 3, Base address b000 */ 536 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 537 #ifdef CONFIG_PHYS_64BIT 538 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 539 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 540 #else 541 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 542 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 543 #endif 544 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 545 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 546 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 547 #ifdef CONFIG_PHYS_64BIT 548 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 549 #else 550 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 551 #endif 552 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 553 554 #ifdef CONFIG_PCI 555 #define CONFIG_PCI_INDIRECT_BRIDGE 556 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 557 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 558 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */ 559 #endif 560 561 /* SATA */ 562 #define CONFIG_LIBATA 563 #define CONFIG_FSL_SATA 564 #define CONFIG_FSL_SATA_V2 565 566 #define CONFIG_SYS_SATA_MAX_DEVICE 2 567 #define CONFIG_SATA1 568 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 569 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 570 #define CONFIG_SATA2 571 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 572 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 573 574 #ifdef CONFIG_FSL_SATA 575 #define CONFIG_LBA48 576 #define CONFIG_CMD_SATA 577 #define CONFIG_DOS_PARTITION 578 #define CONFIG_CMD_EXT2 579 #endif 580 581 #define CONFIG_MMC 582 #ifdef CONFIG_MMC 583 #define CONFIG_CMD_MMC 584 #define CONFIG_FSL_ESDHC 585 #define CONFIG_GENERIC_MMC 586 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 587 #endif 588 589 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 590 #define CONFIG_CMD_EXT2 591 #define CONFIG_CMD_FAT 592 #define CONFIG_DOS_PARTITION 593 #endif 594 595 #define CONFIG_TSEC_ENET 596 #ifdef CONFIG_TSEC_ENET 597 598 #define CONFIG_TSECV2 599 600 #define CONFIG_MII /* MII PHY management */ 601 #define CONFIG_TSEC1 1 602 #define CONFIG_TSEC1_NAME "eTSEC1" 603 #define CONFIG_TSEC2 1 604 #define CONFIG_TSEC2_NAME "eTSEC2" 605 606 #define TSEC1_PHY_ADDR 1 607 #define TSEC2_PHY_ADDR 2 608 609 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 610 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 611 612 #define TSEC1_PHYIDX 0 613 #define TSEC2_PHYIDX 0 614 615 #define CONFIG_ETHPRIME "eTSEC1" 616 617 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 618 #endif 619 620 /* 621 * Dynamic MTD Partition support with mtdparts 622 */ 623 #define CONFIG_MTD_DEVICE 624 #define CONFIG_MTD_PARTITIONS 625 #define CONFIG_CMD_MTDPARTS 626 #define CONFIG_FLASH_CFI_MTD 627 #ifdef CONFIG_PHYS_64BIT 628 #define MTDIDS_DEFAULT "nor0=fe8000000.nor" 629 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \ 630 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 631 "512k(dtb),768k(u-boot)" 632 #else 633 #define MTDIDS_DEFAULT "nor0=e8000000.nor" 634 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \ 635 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 636 "512k(dtb),768k(u-boot)" 637 #endif 638 639 /* 640 * Environment 641 */ 642 #ifdef CONFIG_SPIFLASH 643 #define CONFIG_ENV_IS_IN_SPI_FLASH 644 #define CONFIG_ENV_SPI_BUS 0 645 #define CONFIG_ENV_SPI_CS 0 646 #define CONFIG_ENV_SPI_MAX_HZ 10000000 647 #define CONFIG_ENV_SPI_MODE 0 648 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 649 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 650 #define CONFIG_ENV_SECT_SIZE 0x10000 651 #elif defined(CONFIG_SDCARD) 652 #define CONFIG_ENV_IS_IN_MMC 653 #define CONFIG_FSL_FIXED_MMC_LOCATION 654 #define CONFIG_ENV_SIZE 0x2000 655 #define CONFIG_SYS_MMC_ENV_DEV 0 656 #elif defined(CONFIG_NAND) 657 #ifdef CONFIG_TPL_BUILD 658 #define CONFIG_ENV_SIZE 0x2000 659 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 660 #else 661 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 662 #endif 663 #define CONFIG_ENV_IS_IN_NAND 664 #define CONFIG_ENV_OFFSET (1024 * 1024) 665 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 666 #elif defined(CONFIG_SYS_RAMBOOT) 667 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 668 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 669 #define CONFIG_ENV_SIZE 0x2000 670 #else 671 #define CONFIG_ENV_IS_IN_FLASH 672 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 673 #define CONFIG_ENV_SIZE 0x2000 674 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 675 #endif 676 677 #define CONFIG_LOADS_ECHO 678 #define CONFIG_SYS_LOADS_BAUD_CHANGE 679 680 /* 681 * Command line configuration. 682 */ 683 #include <config_cmd_default.h> 684 685 #define CONFIG_CMD_ELF 686 #define CONFIG_CMD_ERRATA 687 #define CONFIG_CMD_IRQ 688 #define CONFIG_CMD_I2C 689 #define CONFIG_CMD_MII 690 #define CONFIG_CMD_PING 691 #define CONFIG_CMD_SETEXPR 692 #define CONFIG_CMD_REGINFO 693 694 #ifdef CONFIG_PCI 695 #define CONFIG_CMD_PCI 696 #define CONFIG_CMD_NET 697 #endif 698 699 /* 700 * USB 701 */ 702 #define CONFIG_HAS_FSL_DR_USB 703 #ifdef CONFIG_HAS_FSL_DR_USB 704 #define CONFIG_USB_EHCI 705 706 #ifdef CONFIG_USB_EHCI 707 #define CONFIG_CMD_USB 708 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 709 #define CONFIG_USB_EHCI_FSL 710 #define CONFIG_USB_STORAGE 711 #define CONFIG_CMD_FAT 712 #endif 713 #endif 714 715 /* 716 * Miscellaneous configurable options 717 */ 718 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 719 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 720 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 721 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 722 #ifdef CONFIG_CMD_KGDB 723 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 724 #else 725 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 726 #endif 727 /* Print Buffer Size */ 728 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 729 #define CONFIG_SYS_MAXARGS 16 730 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 731 732 /* 733 * For booting Linux, the board info and command line data 734 * have to be in the first 64 MB of memory, since this is 735 * the maximum mapped by the Linux kernel during initialization. 736 */ 737 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 738 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 739 740 #ifdef CONFIG_CMD_KGDB 741 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 742 #endif 743 744 /* 745 * Environment Configuration 746 */ 747 748 #define CONFIG_HOSTNAME p1022ds 749 #define CONFIG_ROOTPATH "/opt/nfsroot" 750 #define CONFIG_BOOTFILE "uImage" 751 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 752 753 #define CONFIG_LOADADDR 1000000 754 755 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 756 757 #define CONFIG_BAUDRATE 115200 758 759 #define CONFIG_EXTRA_ENV_SETTINGS \ 760 "netdev=eth0\0" \ 761 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 762 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 763 "tftpflash=tftpboot $loadaddr $uboot && " \ 764 "protect off $ubootaddr +$filesize && " \ 765 "erase $ubootaddr +$filesize && " \ 766 "cp.b $loadaddr $ubootaddr $filesize && " \ 767 "protect on $ubootaddr +$filesize && " \ 768 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 769 "consoledev=ttyS0\0" \ 770 "ramdiskaddr=2000000\0" \ 771 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 772 "fdtaddr=c00000\0" \ 773 "fdtfile=p1022ds.dtb\0" \ 774 "bdev=sda3\0" \ 775 "hwconfig=esdhc;audclk:12\0" 776 777 #define CONFIG_HDBOOT \ 778 "setenv bootargs root=/dev/$bdev rw " \ 779 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 780 "tftp $loadaddr $bootfile;" \ 781 "tftp $fdtaddr $fdtfile;" \ 782 "bootm $loadaddr - $fdtaddr" 783 784 #define CONFIG_NFSBOOTCOMMAND \ 785 "setenv bootargs root=/dev/nfs rw " \ 786 "nfsroot=$serverip:$rootpath " \ 787 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 788 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 789 "tftp $loadaddr $bootfile;" \ 790 "tftp $fdtaddr $fdtfile;" \ 791 "bootm $loadaddr - $fdtaddr" 792 793 #define CONFIG_RAMBOOTCOMMAND \ 794 "setenv bootargs root=/dev/ram rw " \ 795 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 796 "tftp $ramdiskaddr $ramdiskfile;" \ 797 "tftp $loadaddr $bootfile;" \ 798 "tftp $fdtaddr $fdtfile;" \ 799 "bootm $loadaddr $ramdiskaddr $fdtaddr" 800 801 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 802 803 #endif 804