1 /* 2 * Copyright 2010-2012 Freescale Semiconductor, Inc. 3 * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> 4 * Timur Tabi <timur@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "../board/freescale/common/ics307_clk.h" 13 14 #ifdef CONFIG_SDCARD 15 #define CONFIG_SPL_MMC_MINIMAL 16 #define CONFIG_SPL_FLUSH_IMAGE 17 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 18 #define CONFIG_SYS_TEXT_BASE 0x11001000 19 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 20 #define CONFIG_SPL_PAD_TO 0x20000 21 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 22 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 23 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 24 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 25 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 26 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 27 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 28 #define CONFIG_SPL_MMC_BOOT 29 #ifdef CONFIG_SPL_BUILD 30 #define CONFIG_SPL_COMMON_INIT_DDR 31 #endif 32 #endif 33 34 #ifdef CONFIG_SPIFLASH 35 #define CONFIG_SPL_SPI_FLASH_MINIMAL 36 #define CONFIG_SPL_FLUSH_IMAGE 37 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 38 #define CONFIG_SYS_TEXT_BASE 0x11001000 39 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 40 #define CONFIG_SPL_PAD_TO 0x20000 41 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 43 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 45 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 46 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 47 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 48 #define CONFIG_SPL_SPI_BOOT 49 #ifdef CONFIG_SPL_BUILD 50 #define CONFIG_SPL_COMMON_INIT_DDR 51 #endif 52 #endif 53 54 #define CONFIG_NAND_FSL_ELBC 55 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 56 #define CONFIG_SYS_NAND_MAX_OOBFREE 5 57 58 #ifdef CONFIG_NAND 59 #ifdef CONFIG_TPL_BUILD 60 #define CONFIG_SPL_NAND_BOOT 61 #define CONFIG_SPL_FLUSH_IMAGE 62 #define CONFIG_SPL_NAND_INIT 63 #define CONFIG_SPL_COMMON_INIT_DDR 64 #define CONFIG_SPL_MAX_SIZE (128 << 10) 65 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 66 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 67 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 68 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 69 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 70 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 71 #elif defined(CONFIG_SPL_BUILD) 72 #define CONFIG_SPL_INIT_MINIMAL 73 #define CONFIG_SPL_FLUSH_IMAGE 74 #define CONFIG_SPL_TEXT_BASE 0xff800000 75 #define CONFIG_SPL_MAX_SIZE 4096 76 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 77 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 78 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 79 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 80 #endif 81 #define CONFIG_SPL_PAD_TO 0x20000 82 #define CONFIG_TPL_PAD_TO 0x20000 83 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 84 #define CONFIG_SYS_TEXT_BASE 0x11001000 85 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 86 #endif 87 88 /* High Level Configuration Options */ 89 #define CONFIG_MP /* support multiple processors */ 90 91 #ifndef CONFIG_SYS_TEXT_BASE 92 #define CONFIG_SYS_TEXT_BASE 0xeff40000 93 #endif 94 95 #ifndef CONFIG_RESET_VECTOR_ADDRESS 96 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 97 #endif 98 99 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 100 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 101 #define CONFIG_PCIE3 /* PCIE controller 3 (ULI bridge) */ 102 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 103 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 104 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 105 106 #define CONFIG_ENABLE_36BIT_PHYS 107 108 #ifdef CONFIG_PHYS_64BIT 109 #define CONFIG_ADDR_MAP 110 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 111 #endif 112 113 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 114 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 115 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 116 117 /* 118 * These can be toggled for performance analysis, otherwise use default. 119 */ 120 #define CONFIG_L2_CACHE 121 #define CONFIG_BTB 122 123 #define CONFIG_SYS_MEMTEST_START 0x00000000 124 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 125 126 #define CONFIG_SYS_CCSRBAR 0xffe00000 127 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 128 129 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 130 SPL code*/ 131 #ifdef CONFIG_SPL_BUILD 132 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 133 #endif 134 135 /* DDR Setup */ 136 #define CONFIG_DDR_SPD 137 #define CONFIG_VERY_BIG_RAM 138 139 #ifdef CONFIG_DDR_ECC 140 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 141 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 142 #endif 143 144 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 145 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 146 147 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 148 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 149 150 /* I2C addresses of SPD EEPROMs */ 151 #define CONFIG_SYS_SPD_BUS_NUM 1 152 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 153 154 /* These are used when DDR doesn't use SPD. */ 155 #define CONFIG_SYS_SDRAM_SIZE 2048 156 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 157 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 158 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 159 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F 160 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 161 #define CONFIG_SYS_DDR_TIMING_3 0x00010000 162 #define CONFIG_SYS_DDR_TIMING_0 0x40110104 163 #define CONFIG_SYS_DDR_TIMING_1 0x5c5bd746 164 #define CONFIG_SYS_DDR_TIMING_2 0x0fa8d4ca 165 #define CONFIG_SYS_DDR_MODE_1 0x00441221 166 #define CONFIG_SYS_DDR_MODE_2 0x00000000 167 #define CONFIG_SYS_DDR_INTERVAL 0x0a280100 168 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 169 #define CONFIG_SYS_DDR_CLK_CTRL 0x02800000 170 #define CONFIG_SYS_DDR_CONTROL 0xc7000008 171 #define CONFIG_SYS_DDR_CONTROL_2 0x24401041 172 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 173 #define CONFIG_SYS_DDR_TIMING_5 0x02401400 174 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 175 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608 176 177 /* 178 * Memory map 179 * 180 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 181 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable 182 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 183 * 184 * Localbus cacheable (TBD) 185 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 186 * 187 * Localbus non-cacheable 188 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 189 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 190 * 0xff80_0000 0xff80_7fff NAND 32K non-cacheable 191 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 192 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 193 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 194 */ 195 196 /* 197 * Local Bus Definitions 198 */ 199 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* start of FLASH 128M */ 200 #ifdef CONFIG_PHYS_64BIT 201 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull 202 #else 203 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 204 #endif 205 206 #define CONFIG_FLASH_BR_PRELIM \ 207 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 208 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) 209 210 #ifdef CONFIG_NAND 211 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 212 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 213 #else 214 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 215 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 216 #endif 217 218 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 219 #define CONFIG_SYS_FLASH_QUIET_TEST 220 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 221 222 #define CONFIG_SYS_MAX_FLASH_BANKS 1 223 #define CONFIG_SYS_MAX_FLASH_SECT 1024 224 225 #ifndef CONFIG_SYS_MONITOR_BASE 226 #ifdef CONFIG_SPL_BUILD 227 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 228 #else 229 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 230 #endif 231 #endif 232 233 #define CONFIG_FLASH_CFI_DRIVER 234 #define CONFIG_SYS_FLASH_CFI 235 #define CONFIG_SYS_FLASH_EMPTY_INFO 236 237 /* Nand Flash */ 238 #if defined(CONFIG_NAND_FSL_ELBC) 239 #define CONFIG_SYS_NAND_BASE 0xff800000 240 #ifdef CONFIG_PHYS_64BIT 241 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 242 #else 243 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 244 #endif 245 246 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 247 #define CONFIG_SYS_MAX_NAND_DEVICE 1 248 #define CONFIG_CMD_NAND 1 249 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) 250 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE 251 252 /* NAND flash config */ 253 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 254 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 255 | BR_PS_8 /* Port Size = 8 bit */ \ 256 | BR_MS_FCM /* MSEL = FCM */ \ 257 | BR_V) /* valid */ 258 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* length 256K */ \ 259 | OR_FCM_PGS /* Large Page*/ \ 260 | OR_FCM_CSCT \ 261 | OR_FCM_CST \ 262 | OR_FCM_CHT \ 263 | OR_FCM_SCY_1 \ 264 | OR_FCM_TRLX \ 265 | OR_FCM_EHTR) 266 #ifdef CONFIG_NAND 267 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 268 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 269 #else 270 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 271 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 272 #endif 273 274 #endif /* CONFIG_NAND_FSL_ELBC */ 275 276 #define CONFIG_BOARD_EARLY_INIT_R 277 #define CONFIG_MISC_INIT_R 278 #define CONFIG_HWCONFIG 279 280 #define CONFIG_FSL_NGPIXIS 281 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 282 #ifdef CONFIG_PHYS_64BIT 283 #define PIXIS_BASE_PHYS 0xfffdf0000ull 284 #else 285 #define PIXIS_BASE_PHYS PIXIS_BASE 286 #endif 287 288 #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 289 #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) 290 291 #define PIXIS_LBMAP_SWITCH 7 292 #define PIXIS_LBMAP_MASK 0xF0 293 #define PIXIS_LBMAP_ALTBANK 0x20 294 #define PIXIS_SPD 0x07 295 #define PIXIS_SPD_SYSCLK_MASK 0x07 296 #define PIXIS_ELBC_SPI_MASK 0xc0 297 #define PIXIS_SPI 0x80 298 299 #define CONFIG_SYS_INIT_RAM_LOCK 300 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 301 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 302 303 #define CONFIG_SYS_GBL_DATA_OFFSET \ 304 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 305 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 306 307 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 308 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 309 310 /* 311 * Config the L2 Cache as L2 SRAM 312 */ 313 #if defined(CONFIG_SPL_BUILD) 314 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 315 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 316 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 317 #define CONFIG_SYS_L2_SIZE (256 << 10) 318 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 319 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 320 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 321 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 322 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 323 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 324 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 325 #elif defined(CONFIG_NAND) 326 #ifdef CONFIG_TPL_BUILD 327 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 328 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 329 #define CONFIG_SYS_L2_SIZE (256 << 10) 330 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 331 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 332 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 333 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 334 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 335 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 336 #else 337 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 338 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 339 #define CONFIG_SYS_L2_SIZE (256 << 10) 340 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 341 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 342 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 343 #endif 344 #endif 345 #endif 346 347 /* 348 * Serial Port 349 */ 350 #define CONFIG_CONS_INDEX 1 351 #define CONFIG_SYS_NS16550_SERIAL 352 #define CONFIG_SYS_NS16550_REG_SIZE 1 353 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 354 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 355 #define CONFIG_NS16550_MIN_FUNCTIONS 356 #endif 357 358 #define CONFIG_SYS_BAUDRATE_TABLE \ 359 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 360 361 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 362 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 363 364 /* Video */ 365 366 #ifdef CONFIG_FSL_DIU_FB 367 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 368 #define CONFIG_VIDEO_LOGO 369 #define CONFIG_VIDEO_BMP_LOGO 370 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 371 /* 372 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 373 * disable empty flash sector detection, which is I/O-intensive. 374 */ 375 #undef CONFIG_SYS_FLASH_EMPTY_INFO 376 #endif 377 378 #ifndef CONFIG_FSL_DIU_FB 379 #endif 380 381 #ifdef CONFIG_ATI 382 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 383 #define CONFIG_BIOSEMU 384 #define CONFIG_ATI_RADEON_FB 385 #define CONFIG_VIDEO_LOGO 386 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 387 #endif 388 389 /* I2C */ 390 #define CONFIG_SYS_I2C 391 #define CONFIG_SYS_I2C_FSL 392 #define CONFIG_SYS_FSL_I2C_SPEED 400000 393 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 394 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 395 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 396 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 397 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 398 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} 399 400 /* 401 * I2C2 EEPROM 402 */ 403 #define CONFIG_ID_EEPROM 404 #define CONFIG_SYS_I2C_EEPROM_NXID 405 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 406 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 407 #define CONFIG_SYS_EEPROM_BUS_NUM 1 408 409 /* 410 * eSPI - Enhanced SPI 411 */ 412 413 #define CONFIG_HARD_SPI 414 415 #define CONFIG_SF_DEFAULT_SPEED 10000000 416 #define CONFIG_SF_DEFAULT_MODE 0 417 418 /* 419 * General PCI 420 * Memory space is mapped 1-1, but I/O space must start from 0. 421 */ 422 423 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 424 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 425 #ifdef CONFIG_PHYS_64BIT 426 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 427 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 428 #else 429 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 430 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 431 #endif 432 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 433 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 434 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 435 #ifdef CONFIG_PHYS_64BIT 436 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 437 #else 438 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 439 #endif 440 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 441 442 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 443 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 444 #ifdef CONFIG_PHYS_64BIT 445 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 446 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 447 #else 448 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 449 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 450 #endif 451 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 452 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 453 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 454 #ifdef CONFIG_PHYS_64BIT 455 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 456 #else 457 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 458 #endif 459 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 460 461 /* controller 3, Slot 1, tgtid 3, Base address b000 */ 462 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 463 #ifdef CONFIG_PHYS_64BIT 464 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 465 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 466 #else 467 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 468 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 469 #endif 470 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 471 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 472 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 473 #ifdef CONFIG_PHYS_64BIT 474 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 475 #else 476 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 477 #endif 478 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 479 480 #ifdef CONFIG_PCI 481 #define CONFIG_PCI_INDIRECT_BRIDGE 482 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 483 #endif 484 485 /* SATA */ 486 #define CONFIG_LIBATA 487 #define CONFIG_FSL_SATA 488 #define CONFIG_FSL_SATA_V2 489 490 #define CONFIG_SYS_SATA_MAX_DEVICE 2 491 #define CONFIG_SATA1 492 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 493 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 494 #define CONFIG_SATA2 495 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 496 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 497 498 #ifdef CONFIG_FSL_SATA 499 #define CONFIG_LBA48 500 #define CONFIG_CMD_SATA 501 #endif 502 503 #ifdef CONFIG_MMC 504 #define CONFIG_FSL_ESDHC 505 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 506 #endif 507 508 #define CONFIG_TSEC_ENET 509 #ifdef CONFIG_TSEC_ENET 510 511 #define CONFIG_TSECV2 512 513 #define CONFIG_MII /* MII PHY management */ 514 #define CONFIG_TSEC1 1 515 #define CONFIG_TSEC1_NAME "eTSEC1" 516 #define CONFIG_TSEC2 1 517 #define CONFIG_TSEC2_NAME "eTSEC2" 518 519 #define TSEC1_PHY_ADDR 1 520 #define TSEC2_PHY_ADDR 2 521 522 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 523 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 524 525 #define TSEC1_PHYIDX 0 526 #define TSEC2_PHYIDX 0 527 528 #define CONFIG_ETHPRIME "eTSEC1" 529 530 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 531 #endif 532 533 /* 534 * Dynamic MTD Partition support with mtdparts 535 */ 536 #define CONFIG_MTD_DEVICE 537 #define CONFIG_MTD_PARTITIONS 538 #define CONFIG_CMD_MTDPARTS 539 #define CONFIG_FLASH_CFI_MTD 540 #ifdef CONFIG_PHYS_64BIT 541 #define MTDIDS_DEFAULT "nor0=fe8000000.nor" 542 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \ 543 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 544 "512k(dtb),768k(u-boot)" 545 #else 546 #define MTDIDS_DEFAULT "nor0=e8000000.nor" 547 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \ 548 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 549 "512k(dtb),768k(u-boot)" 550 #endif 551 552 /* 553 * Environment 554 */ 555 #ifdef CONFIG_SPIFLASH 556 #define CONFIG_ENV_IS_IN_SPI_FLASH 557 #define CONFIG_ENV_SPI_BUS 0 558 #define CONFIG_ENV_SPI_CS 0 559 #define CONFIG_ENV_SPI_MAX_HZ 10000000 560 #define CONFIG_ENV_SPI_MODE 0 561 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 562 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 563 #define CONFIG_ENV_SECT_SIZE 0x10000 564 #elif defined(CONFIG_SDCARD) 565 #define CONFIG_ENV_IS_IN_MMC 566 #define CONFIG_FSL_FIXED_MMC_LOCATION 567 #define CONFIG_ENV_SIZE 0x2000 568 #define CONFIG_SYS_MMC_ENV_DEV 0 569 #elif defined(CONFIG_NAND) 570 #ifdef CONFIG_TPL_BUILD 571 #define CONFIG_ENV_SIZE 0x2000 572 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 573 #else 574 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 575 #endif 576 #define CONFIG_ENV_IS_IN_NAND 577 #define CONFIG_ENV_OFFSET (1024 * 1024) 578 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 579 #elif defined(CONFIG_SYS_RAMBOOT) 580 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 581 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 582 #define CONFIG_ENV_SIZE 0x2000 583 #else 584 #define CONFIG_ENV_IS_IN_FLASH 585 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 586 #define CONFIG_ENV_SIZE 0x2000 587 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 588 #endif 589 590 #define CONFIG_LOADS_ECHO 591 #define CONFIG_SYS_LOADS_BAUD_CHANGE 592 593 /* 594 * Command line configuration. 595 */ 596 #define CONFIG_CMD_ERRATA 597 #define CONFIG_CMD_IRQ 598 #define CONFIG_CMD_REGINFO 599 600 #ifdef CONFIG_PCI 601 #define CONFIG_CMD_PCI 602 #endif 603 604 /* 605 * USB 606 */ 607 #define CONFIG_HAS_FSL_DR_USB 608 #ifdef CONFIG_HAS_FSL_DR_USB 609 #define CONFIG_USB_EHCI 610 611 #ifdef CONFIG_USB_EHCI 612 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 613 #define CONFIG_USB_EHCI_FSL 614 #endif 615 #endif 616 617 /* 618 * Miscellaneous configurable options 619 */ 620 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 621 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 622 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 623 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 624 #ifdef CONFIG_CMD_KGDB 625 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 626 #else 627 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 628 #endif 629 /* Print Buffer Size */ 630 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 631 #define CONFIG_SYS_MAXARGS 16 632 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 633 634 /* 635 * For booting Linux, the board info and command line data 636 * have to be in the first 64 MB of memory, since this is 637 * the maximum mapped by the Linux kernel during initialization. 638 */ 639 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 640 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 641 642 #ifdef CONFIG_CMD_KGDB 643 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 644 #endif 645 646 /* 647 * Environment Configuration 648 */ 649 650 #define CONFIG_HOSTNAME p1022ds 651 #define CONFIG_ROOTPATH "/opt/nfsroot" 652 #define CONFIG_BOOTFILE "uImage" 653 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 654 655 #define CONFIG_LOADADDR 1000000 656 657 #define CONFIG_EXTRA_ENV_SETTINGS \ 658 "netdev=eth0\0" \ 659 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 660 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 661 "tftpflash=tftpboot $loadaddr $uboot && " \ 662 "protect off $ubootaddr +$filesize && " \ 663 "erase $ubootaddr +$filesize && " \ 664 "cp.b $loadaddr $ubootaddr $filesize && " \ 665 "protect on $ubootaddr +$filesize && " \ 666 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 667 "consoledev=ttyS0\0" \ 668 "ramdiskaddr=2000000\0" \ 669 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 670 "fdtaddr=1e00000\0" \ 671 "fdtfile=p1022ds.dtb\0" \ 672 "bdev=sda3\0" \ 673 "hwconfig=esdhc;audclk:12\0" 674 675 #define CONFIG_HDBOOT \ 676 "setenv bootargs root=/dev/$bdev rw " \ 677 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 678 "tftp $loadaddr $bootfile;" \ 679 "tftp $fdtaddr $fdtfile;" \ 680 "bootm $loadaddr - $fdtaddr" 681 682 #define CONFIG_NFSBOOTCOMMAND \ 683 "setenv bootargs root=/dev/nfs rw " \ 684 "nfsroot=$serverip:$rootpath " \ 685 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 686 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 687 "tftp $loadaddr $bootfile;" \ 688 "tftp $fdtaddr $fdtfile;" \ 689 "bootm $loadaddr - $fdtaddr" 690 691 #define CONFIG_RAMBOOTCOMMAND \ 692 "setenv bootargs root=/dev/ram rw " \ 693 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 694 "tftp $ramdiskaddr $ramdiskfile;" \ 695 "tftp $loadaddr $bootfile;" \ 696 "tftp $fdtaddr $fdtfile;" \ 697 "bootm $loadaddr $ramdiskaddr $fdtaddr" 698 699 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 700 701 #endif 702