1 /* 2 * Copyright 2010-2012 Freescale Semiconductor, Inc. 3 * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> 4 * Timur Tabi <timur@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "../board/freescale/common/ics307_clk.h" 13 14 #define CONFIG_DISPLAY_BOARDINFO 15 16 #ifdef CONFIG_36BIT 17 #define CONFIG_PHYS_64BIT 18 #endif 19 20 #ifdef CONFIG_SDCARD 21 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 22 #define CONFIG_SPL_ENV_SUPPORT 23 #define CONFIG_SPL_SERIAL_SUPPORT 24 #define CONFIG_SPL_MMC_SUPPORT 25 #define CONFIG_SPL_MMC_MINIMAL 26 #define CONFIG_SPL_FLUSH_IMAGE 27 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 28 #define CONFIG_SPL_LIBGENERIC_SUPPORT 29 #define CONFIG_SPL_LIBCOMMON_SUPPORT 30 #define CONFIG_SPL_I2C_SUPPORT 31 #define CONFIG_FSL_LAW /* Use common FSL init code */ 32 #define CONFIG_SYS_TEXT_BASE 0x11001000 33 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 34 #define CONFIG_SPL_PAD_TO 0x20000 35 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 36 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 37 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 38 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 39 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 40 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 41 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 42 #define CONFIG_SPL_MMC_BOOT 43 #ifdef CONFIG_SPL_BUILD 44 #define CONFIG_SPL_COMMON_INIT_DDR 45 #endif 46 #endif 47 48 #ifdef CONFIG_SPIFLASH 49 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 50 #define CONFIG_SPL_ENV_SUPPORT 51 #define CONFIG_SPL_SERIAL_SUPPORT 52 #define CONFIG_SPL_SPI_SUPPORT 53 #define CONFIG_SPL_SPI_FLASH_SUPPORT 54 #define CONFIG_SPL_SPI_FLASH_MINIMAL 55 #define CONFIG_SPL_FLUSH_IMAGE 56 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 57 #define CONFIG_SPL_LIBGENERIC_SUPPORT 58 #define CONFIG_SPL_LIBCOMMON_SUPPORT 59 #define CONFIG_SPL_I2C_SUPPORT 60 #define CONFIG_FSL_LAW /* Use common FSL init code */ 61 #define CONFIG_SYS_TEXT_BASE 0x11001000 62 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 63 #define CONFIG_SPL_PAD_TO 0x20000 64 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 69 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 70 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 71 #define CONFIG_SPL_SPI_BOOT 72 #ifdef CONFIG_SPL_BUILD 73 #define CONFIG_SPL_COMMON_INIT_DDR 74 #endif 75 #endif 76 77 #define CONFIG_NAND_FSL_ELBC 78 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 79 #define CONFIG_SYS_NAND_MAX_OOBFREE 5 80 81 #ifdef CONFIG_NAND 82 #ifdef CONFIG_TPL_BUILD 83 #define CONFIG_SPL_NAND_BOOT 84 #define CONFIG_SPL_FLUSH_IMAGE 85 #define CONFIG_SPL_ENV_SUPPORT 86 #define CONFIG_SPL_NAND_INIT 87 #define CONFIG_SPL_SERIAL_SUPPORT 88 #define CONFIG_SPL_LIBGENERIC_SUPPORT 89 #define CONFIG_SPL_LIBCOMMON_SUPPORT 90 #define CONFIG_SPL_I2C_SUPPORT 91 #define CONFIG_SPL_NAND_SUPPORT 92 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 93 #define CONFIG_SPL_COMMON_INIT_DDR 94 #define CONFIG_SPL_MAX_SIZE (128 << 10) 95 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 96 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 97 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 98 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 99 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 100 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 101 #elif defined(CONFIG_SPL_BUILD) 102 #define CONFIG_SPL_INIT_MINIMAL 103 #define CONFIG_SPL_SERIAL_SUPPORT 104 #define CONFIG_SPL_NAND_SUPPORT 105 #define CONFIG_SPL_FLUSH_IMAGE 106 #define CONFIG_SPL_TEXT_BASE 0xff800000 107 #define CONFIG_SPL_MAX_SIZE 4096 108 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 109 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 110 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 111 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 112 #endif 113 #define CONFIG_SPL_PAD_TO 0x20000 114 #define CONFIG_TPL_PAD_TO 0x20000 115 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 116 #define CONFIG_SYS_TEXT_BASE 0x11001000 117 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 118 #endif 119 120 /* High Level Configuration Options */ 121 #define CONFIG_BOOKE /* BOOKE */ 122 #define CONFIG_E500 /* BOOKE e500 family */ 123 #define CONFIG_P1022 124 #define CONFIG_P1022DS 125 #define CONFIG_MP /* support multiple processors */ 126 127 #ifndef CONFIG_SYS_TEXT_BASE 128 #define CONFIG_SYS_TEXT_BASE 0xeff40000 129 #endif 130 131 #ifndef CONFIG_RESET_VECTOR_ADDRESS 132 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 133 #endif 134 135 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 136 #define CONFIG_PCI /* Enable PCI/PCIE */ 137 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 138 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 139 #define CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */ 140 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 141 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 142 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 143 144 #define CONFIG_ENABLE_36BIT_PHYS 145 146 #ifdef CONFIG_PHYS_64BIT 147 #define CONFIG_ADDR_MAP 148 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 149 #endif 150 151 #define CONFIG_FSL_LAW /* Use common FSL init code */ 152 153 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 154 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 155 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 156 157 /* 158 * These can be toggled for performance analysis, otherwise use default. 159 */ 160 #define CONFIG_L2_CACHE 161 #define CONFIG_BTB 162 163 #define CONFIG_SYS_MEMTEST_START 0x00000000 164 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 165 166 #define CONFIG_SYS_CCSRBAR 0xffe00000 167 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 168 169 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 170 SPL code*/ 171 #ifdef CONFIG_SPL_BUILD 172 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 173 #endif 174 175 176 /* DDR Setup */ 177 #define CONFIG_DDR_SPD 178 #define CONFIG_VERY_BIG_RAM 179 #define CONFIG_SYS_FSL_DDR3 180 181 #ifdef CONFIG_DDR_ECC 182 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 183 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 184 #endif 185 186 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 187 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 188 189 #define CONFIG_NUM_DDR_CONTROLLERS 1 190 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 191 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 192 193 /* I2C addresses of SPD EEPROMs */ 194 #define CONFIG_SYS_SPD_BUS_NUM 1 195 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 196 197 /* These are used when DDR doesn't use SPD. */ 198 #define CONFIG_SYS_SDRAM_SIZE 2048 199 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 200 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 201 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 202 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F 203 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 204 #define CONFIG_SYS_DDR_TIMING_3 0x00010000 205 #define CONFIG_SYS_DDR_TIMING_0 0x40110104 206 #define CONFIG_SYS_DDR_TIMING_1 0x5c5bd746 207 #define CONFIG_SYS_DDR_TIMING_2 0x0fa8d4ca 208 #define CONFIG_SYS_DDR_MODE_1 0x00441221 209 #define CONFIG_SYS_DDR_MODE_2 0x00000000 210 #define CONFIG_SYS_DDR_INTERVAL 0x0a280100 211 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 212 #define CONFIG_SYS_DDR_CLK_CTRL 0x02800000 213 #define CONFIG_SYS_DDR_CONTROL 0xc7000008 214 #define CONFIG_SYS_DDR_CONTROL_2 0x24401041 215 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 216 #define CONFIG_SYS_DDR_TIMING_5 0x02401400 217 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 218 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608 219 220 221 /* 222 * Memory map 223 * 224 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 225 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable 226 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 227 * 228 * Localbus cacheable (TBD) 229 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 230 * 231 * Localbus non-cacheable 232 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 233 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 234 * 0xff80_0000 0xff80_7fff NAND 32K non-cacheable 235 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 236 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 237 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 238 */ 239 240 /* 241 * Local Bus Definitions 242 */ 243 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* start of FLASH 128M */ 244 #ifdef CONFIG_PHYS_64BIT 245 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull 246 #else 247 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 248 #endif 249 250 #define CONFIG_FLASH_BR_PRELIM \ 251 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 252 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) 253 254 #ifdef CONFIG_NAND 255 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 256 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 257 #else 258 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 259 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 260 #endif 261 262 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 263 #define CONFIG_SYS_FLASH_QUIET_TEST 264 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 265 266 #define CONFIG_SYS_MAX_FLASH_BANKS 1 267 #define CONFIG_SYS_MAX_FLASH_SECT 1024 268 269 #ifndef CONFIG_SYS_MONITOR_BASE 270 #ifdef CONFIG_SPL_BUILD 271 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 272 #else 273 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 274 #endif 275 #endif 276 277 #define CONFIG_FLASH_CFI_DRIVER 278 #define CONFIG_SYS_FLASH_CFI 279 #define CONFIG_SYS_FLASH_EMPTY_INFO 280 281 /* Nand Flash */ 282 #if defined(CONFIG_NAND_FSL_ELBC) 283 #define CONFIG_SYS_NAND_BASE 0xff800000 284 #ifdef CONFIG_PHYS_64BIT 285 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 286 #else 287 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 288 #endif 289 290 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 291 #define CONFIG_SYS_MAX_NAND_DEVICE 1 292 #define CONFIG_CMD_NAND 1 293 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) 294 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE 295 296 /* NAND flash config */ 297 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 298 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 299 | BR_PS_8 /* Port Size = 8 bit */ \ 300 | BR_MS_FCM /* MSEL = FCM */ \ 301 | BR_V) /* valid */ 302 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* length 256K */ \ 303 | OR_FCM_PGS /* Large Page*/ \ 304 | OR_FCM_CSCT \ 305 | OR_FCM_CST \ 306 | OR_FCM_CHT \ 307 | OR_FCM_SCY_1 \ 308 | OR_FCM_TRLX \ 309 | OR_FCM_EHTR) 310 #ifdef CONFIG_NAND 311 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 312 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 313 #else 314 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 315 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 316 #endif 317 318 #endif /* CONFIG_NAND_FSL_ELBC */ 319 320 #define CONFIG_BOARD_EARLY_INIT_F 321 #define CONFIG_BOARD_EARLY_INIT_R 322 #define CONFIG_MISC_INIT_R 323 #define CONFIG_HWCONFIG 324 325 #define CONFIG_FSL_NGPIXIS 326 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 327 #ifdef CONFIG_PHYS_64BIT 328 #define PIXIS_BASE_PHYS 0xfffdf0000ull 329 #else 330 #define PIXIS_BASE_PHYS PIXIS_BASE 331 #endif 332 333 #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 334 #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) 335 336 #define PIXIS_LBMAP_SWITCH 7 337 #define PIXIS_LBMAP_MASK 0xF0 338 #define PIXIS_LBMAP_ALTBANK 0x20 339 #define PIXIS_SPD 0x07 340 #define PIXIS_SPD_SYSCLK_MASK 0x07 341 #define PIXIS_ELBC_SPI_MASK 0xc0 342 #define PIXIS_SPI 0x80 343 344 #define CONFIG_SYS_INIT_RAM_LOCK 345 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 346 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 347 348 #define CONFIG_SYS_GBL_DATA_OFFSET \ 349 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 350 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 351 352 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 353 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 354 355 /* 356 * Config the L2 Cache as L2 SRAM 357 */ 358 #if defined(CONFIG_SPL_BUILD) 359 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 360 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 361 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 362 #define CONFIG_SYS_L2_SIZE (256 << 10) 363 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 364 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 365 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 366 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 367 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 368 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 369 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 370 #elif defined(CONFIG_NAND) 371 #ifdef CONFIG_TPL_BUILD 372 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 373 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 374 #define CONFIG_SYS_L2_SIZE (256 << 10) 375 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 376 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 377 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 378 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 379 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 380 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 381 #else 382 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 383 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 384 #define CONFIG_SYS_L2_SIZE (256 << 10) 385 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 386 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 387 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 388 #endif 389 #endif 390 #endif 391 392 /* 393 * Serial Port 394 */ 395 #define CONFIG_CONS_INDEX 1 396 #define CONFIG_SYS_NS16550_SERIAL 397 #define CONFIG_SYS_NS16550_REG_SIZE 1 398 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 399 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 400 #define CONFIG_NS16550_MIN_FUNCTIONS 401 #endif 402 403 #define CONFIG_SYS_BAUDRATE_TABLE \ 404 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 405 406 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 407 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 408 409 /* Use the HUSH parser */ 410 #define CONFIG_SYS_HUSH_PARSER 411 412 /* Video */ 413 414 #ifdef CONFIG_FSL_DIU_FB 415 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 416 #define CONFIG_VIDEO 417 #define CONFIG_CMD_BMP 418 #define CONFIG_CFB_CONSOLE 419 #define CONFIG_VIDEO_SW_CURSOR 420 #define CONFIG_VGA_AS_SINGLE_DEVICE 421 #define CONFIG_VIDEO_LOGO 422 #define CONFIG_VIDEO_BMP_LOGO 423 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 424 /* 425 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 426 * disable empty flash sector detection, which is I/O-intensive. 427 */ 428 #undef CONFIG_SYS_FLASH_EMPTY_INFO 429 #endif 430 431 #ifndef CONFIG_FSL_DIU_FB 432 #endif 433 434 #ifdef CONFIG_ATI 435 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 436 #define CONFIG_VIDEO 437 #define CONFIG_BIOSEMU 438 #define CONFIG_VIDEO_SW_CURSOR 439 #define CONFIG_ATI_RADEON_FB 440 #define CONFIG_VIDEO_LOGO 441 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 442 #define CONFIG_CFB_CONSOLE 443 #define CONFIG_VGA_AS_SINGLE_DEVICE 444 #endif 445 446 /* I2C */ 447 #define CONFIG_SYS_I2C 448 #define CONFIG_SYS_I2C_FSL 449 #define CONFIG_SYS_FSL_I2C_SPEED 400000 450 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 451 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 452 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 453 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 454 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 455 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} 456 457 /* 458 * I2C2 EEPROM 459 */ 460 #define CONFIG_ID_EEPROM 461 #define CONFIG_SYS_I2C_EEPROM_NXID 462 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 463 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 464 #define CONFIG_SYS_EEPROM_BUS_NUM 1 465 466 /* 467 * eSPI - Enhanced SPI 468 */ 469 470 #define CONFIG_HARD_SPI 471 472 #define CONFIG_CMD_SF 473 #define CONFIG_SF_DEFAULT_SPEED 10000000 474 #define CONFIG_SF_DEFAULT_MODE 0 475 476 /* 477 * General PCI 478 * Memory space is mapped 1-1, but I/O space must start from 0. 479 */ 480 481 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 482 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 483 #ifdef CONFIG_PHYS_64BIT 484 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 485 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 486 #else 487 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 488 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 489 #endif 490 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 491 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 492 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 493 #ifdef CONFIG_PHYS_64BIT 494 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 495 #else 496 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 497 #endif 498 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 499 500 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 501 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 502 #ifdef CONFIG_PHYS_64BIT 503 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 504 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 505 #else 506 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 507 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 508 #endif 509 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 510 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 511 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 512 #ifdef CONFIG_PHYS_64BIT 513 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 514 #else 515 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 516 #endif 517 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 518 519 /* controller 3, Slot 1, tgtid 3, Base address b000 */ 520 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 521 #ifdef CONFIG_PHYS_64BIT 522 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 523 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 524 #else 525 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 526 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 527 #endif 528 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 529 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 530 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 531 #ifdef CONFIG_PHYS_64BIT 532 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 533 #else 534 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 535 #endif 536 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 537 538 #ifdef CONFIG_PCI 539 #define CONFIG_PCI_INDIRECT_BRIDGE 540 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 541 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 542 #endif 543 544 /* SATA */ 545 #define CONFIG_LIBATA 546 #define CONFIG_FSL_SATA 547 #define CONFIG_FSL_SATA_V2 548 549 #define CONFIG_SYS_SATA_MAX_DEVICE 2 550 #define CONFIG_SATA1 551 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 552 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 553 #define CONFIG_SATA2 554 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 555 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 556 557 #ifdef CONFIG_FSL_SATA 558 #define CONFIG_LBA48 559 #define CONFIG_CMD_SATA 560 #define CONFIG_DOS_PARTITION 561 #define CONFIG_CMD_EXT2 562 #endif 563 564 #define CONFIG_MMC 565 #ifdef CONFIG_MMC 566 #define CONFIG_CMD_MMC 567 #define CONFIG_FSL_ESDHC 568 #define CONFIG_GENERIC_MMC 569 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 570 #endif 571 572 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 573 #define CONFIG_CMD_EXT2 574 #define CONFIG_CMD_FAT 575 #define CONFIG_DOS_PARTITION 576 #endif 577 578 #define CONFIG_TSEC_ENET 579 #ifdef CONFIG_TSEC_ENET 580 581 #define CONFIG_TSECV2 582 583 #define CONFIG_MII /* MII PHY management */ 584 #define CONFIG_TSEC1 1 585 #define CONFIG_TSEC1_NAME "eTSEC1" 586 #define CONFIG_TSEC2 1 587 #define CONFIG_TSEC2_NAME "eTSEC2" 588 589 #define TSEC1_PHY_ADDR 1 590 #define TSEC2_PHY_ADDR 2 591 592 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 593 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 594 595 #define TSEC1_PHYIDX 0 596 #define TSEC2_PHYIDX 0 597 598 #define CONFIG_ETHPRIME "eTSEC1" 599 600 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 601 #endif 602 603 /* 604 * Dynamic MTD Partition support with mtdparts 605 */ 606 #define CONFIG_MTD_DEVICE 607 #define CONFIG_MTD_PARTITIONS 608 #define CONFIG_CMD_MTDPARTS 609 #define CONFIG_FLASH_CFI_MTD 610 #ifdef CONFIG_PHYS_64BIT 611 #define MTDIDS_DEFAULT "nor0=fe8000000.nor" 612 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \ 613 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 614 "512k(dtb),768k(u-boot)" 615 #else 616 #define MTDIDS_DEFAULT "nor0=e8000000.nor" 617 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \ 618 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 619 "512k(dtb),768k(u-boot)" 620 #endif 621 622 /* 623 * Environment 624 */ 625 #ifdef CONFIG_SPIFLASH 626 #define CONFIG_ENV_IS_IN_SPI_FLASH 627 #define CONFIG_ENV_SPI_BUS 0 628 #define CONFIG_ENV_SPI_CS 0 629 #define CONFIG_ENV_SPI_MAX_HZ 10000000 630 #define CONFIG_ENV_SPI_MODE 0 631 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 632 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 633 #define CONFIG_ENV_SECT_SIZE 0x10000 634 #elif defined(CONFIG_SDCARD) 635 #define CONFIG_ENV_IS_IN_MMC 636 #define CONFIG_FSL_FIXED_MMC_LOCATION 637 #define CONFIG_ENV_SIZE 0x2000 638 #define CONFIG_SYS_MMC_ENV_DEV 0 639 #elif defined(CONFIG_NAND) 640 #ifdef CONFIG_TPL_BUILD 641 #define CONFIG_ENV_SIZE 0x2000 642 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 643 #else 644 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 645 #endif 646 #define CONFIG_ENV_IS_IN_NAND 647 #define CONFIG_ENV_OFFSET (1024 * 1024) 648 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 649 #elif defined(CONFIG_SYS_RAMBOOT) 650 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 651 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 652 #define CONFIG_ENV_SIZE 0x2000 653 #else 654 #define CONFIG_ENV_IS_IN_FLASH 655 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 656 #define CONFIG_ENV_SIZE 0x2000 657 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 658 #endif 659 660 #define CONFIG_LOADS_ECHO 661 #define CONFIG_SYS_LOADS_BAUD_CHANGE 662 663 /* 664 * Command line configuration. 665 */ 666 #define CONFIG_CMD_ERRATA 667 #define CONFIG_CMD_IRQ 668 #define CONFIG_CMD_I2C 669 #define CONFIG_CMD_MII 670 #define CONFIG_CMD_PING 671 #define CONFIG_CMD_REGINFO 672 673 #ifdef CONFIG_PCI 674 #define CONFIG_CMD_PCI 675 #endif 676 677 /* 678 * USB 679 */ 680 #define CONFIG_HAS_FSL_DR_USB 681 #ifdef CONFIG_HAS_FSL_DR_USB 682 #define CONFIG_USB_EHCI 683 684 #ifdef CONFIG_USB_EHCI 685 #define CONFIG_CMD_USB 686 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 687 #define CONFIG_USB_EHCI_FSL 688 #define CONFIG_USB_STORAGE 689 #define CONFIG_CMD_FAT 690 #endif 691 #endif 692 693 /* 694 * Miscellaneous configurable options 695 */ 696 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 697 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 698 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 699 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 700 #ifdef CONFIG_CMD_KGDB 701 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 702 #else 703 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 704 #endif 705 /* Print Buffer Size */ 706 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 707 #define CONFIG_SYS_MAXARGS 16 708 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 709 710 /* 711 * For booting Linux, the board info and command line data 712 * have to be in the first 64 MB of memory, since this is 713 * the maximum mapped by the Linux kernel during initialization. 714 */ 715 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 716 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 717 718 #ifdef CONFIG_CMD_KGDB 719 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 720 #endif 721 722 /* 723 * Environment Configuration 724 */ 725 726 #define CONFIG_HOSTNAME p1022ds 727 #define CONFIG_ROOTPATH "/opt/nfsroot" 728 #define CONFIG_BOOTFILE "uImage" 729 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 730 731 #define CONFIG_LOADADDR 1000000 732 733 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 734 735 #define CONFIG_BAUDRATE 115200 736 737 #define CONFIG_EXTRA_ENV_SETTINGS \ 738 "netdev=eth0\0" \ 739 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 740 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 741 "tftpflash=tftpboot $loadaddr $uboot && " \ 742 "protect off $ubootaddr +$filesize && " \ 743 "erase $ubootaddr +$filesize && " \ 744 "cp.b $loadaddr $ubootaddr $filesize && " \ 745 "protect on $ubootaddr +$filesize && " \ 746 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 747 "consoledev=ttyS0\0" \ 748 "ramdiskaddr=2000000\0" \ 749 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 750 "fdtaddr=c00000\0" \ 751 "fdtfile=p1022ds.dtb\0" \ 752 "bdev=sda3\0" \ 753 "hwconfig=esdhc;audclk:12\0" 754 755 #define CONFIG_HDBOOT \ 756 "setenv bootargs root=/dev/$bdev rw " \ 757 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 758 "tftp $loadaddr $bootfile;" \ 759 "tftp $fdtaddr $fdtfile;" \ 760 "bootm $loadaddr - $fdtaddr" 761 762 #define CONFIG_NFSBOOTCOMMAND \ 763 "setenv bootargs root=/dev/nfs rw " \ 764 "nfsroot=$serverip:$rootpath " \ 765 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 766 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 767 "tftp $loadaddr $bootfile;" \ 768 "tftp $fdtaddr $fdtfile;" \ 769 "bootm $loadaddr - $fdtaddr" 770 771 #define CONFIG_RAMBOOTCOMMAND \ 772 "setenv bootargs root=/dev/ram rw " \ 773 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 774 "tftp $ramdiskaddr $ramdiskfile;" \ 775 "tftp $loadaddr $bootfile;" \ 776 "tftp $fdtaddr $fdtfile;" \ 777 "bootm $loadaddr $ramdiskaddr $fdtaddr" 778 779 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 780 781 #endif 782