1 /* 2 * Copyright 2010-2012 Freescale Semiconductor, Inc. 3 * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> 4 * Timur Tabi <timur@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "../board/freescale/common/ics307_clk.h" 13 14 #define CONFIG_DISPLAY_BOARDINFO 15 16 #ifdef CONFIG_36BIT 17 #define CONFIG_PHYS_64BIT 18 #endif 19 20 #ifdef CONFIG_SDCARD 21 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 22 #define CONFIG_SPL_ENV_SUPPORT 23 #define CONFIG_SPL_SERIAL_SUPPORT 24 #define CONFIG_SPL_MMC_SUPPORT 25 #define CONFIG_SPL_MMC_MINIMAL 26 #define CONFIG_SPL_FLUSH_IMAGE 27 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 28 #define CONFIG_SPL_LIBGENERIC_SUPPORT 29 #define CONFIG_SPL_LIBCOMMON_SUPPORT 30 #define CONFIG_SPL_I2C_SUPPORT 31 #define CONFIG_FSL_LAW /* Use common FSL init code */ 32 #define CONFIG_SYS_TEXT_BASE 0x11001000 33 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 34 #define CONFIG_SPL_PAD_TO 0x20000 35 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 36 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 37 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 38 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 39 #define CONFIG_SYS_MMC_U_BOOT_OFFS (128 << 10) 40 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 41 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 42 #define CONFIG_SPL_MMC_BOOT 43 #ifdef CONFIG_SPL_BUILD 44 #define CONFIG_SPL_COMMON_INIT_DDR 45 #endif 46 #endif 47 48 #ifdef CONFIG_SPIFLASH 49 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 50 #define CONFIG_SPL_ENV_SUPPORT 51 #define CONFIG_SPL_SERIAL_SUPPORT 52 #define CONFIG_SPL_SPI_SUPPORT 53 #define CONFIG_SPL_SPI_FLASH_SUPPORT 54 #define CONFIG_SPL_SPI_FLASH_MINIMAL 55 #define CONFIG_SPL_FLUSH_IMAGE 56 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 57 #define CONFIG_SPL_LIBGENERIC_SUPPORT 58 #define CONFIG_SPL_LIBCOMMON_SUPPORT 59 #define CONFIG_SPL_I2C_SUPPORT 60 #define CONFIG_FSL_LAW /* Use common FSL init code */ 61 #define CONFIG_SYS_TEXT_BASE 0x11001000 62 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 63 #define CONFIG_SPL_PAD_TO 0x20000 64 #define CONFIG_SPL_MAX_SIZE (128 * 1024) 65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 67 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) 69 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 70 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 71 #define CONFIG_SPL_SPI_BOOT 72 #ifdef CONFIG_SPL_BUILD 73 #define CONFIG_SPL_COMMON_INIT_DDR 74 #endif 75 #endif 76 77 #define CONFIG_NAND_FSL_ELBC 78 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 79 #define CONFIG_SYS_NAND_MAX_OOBFREE 5 80 81 #ifdef CONFIG_NAND 82 #ifdef CONFIG_TPL_BUILD 83 #define CONFIG_SPL_NAND_BOOT 84 #define CONFIG_SPL_FLUSH_IMAGE 85 #define CONFIG_SPL_ENV_SUPPORT 86 #define CONFIG_SPL_NAND_INIT 87 #define CONFIG_SPL_SERIAL_SUPPORT 88 #define CONFIG_SPL_LIBGENERIC_SUPPORT 89 #define CONFIG_SPL_LIBCOMMON_SUPPORT 90 #define CONFIG_SPL_I2C_SUPPORT 91 #define CONFIG_SPL_NAND_SUPPORT 92 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 93 #define CONFIG_SPL_COMMON_INIT_DDR 94 #define CONFIG_SPL_MAX_SIZE (128 << 10) 95 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 96 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 97 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 98 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 99 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 100 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 101 #elif defined(CONFIG_SPL_BUILD) 102 #define CONFIG_SPL_INIT_MINIMAL 103 #define CONFIG_SPL_SERIAL_SUPPORT 104 #define CONFIG_SPL_NAND_SUPPORT 105 #define CONFIG_SPL_FLUSH_IMAGE 106 #define CONFIG_SPL_TEXT_BASE 0xff800000 107 #define CONFIG_SPL_MAX_SIZE 4096 108 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 109 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 110 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 111 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 112 #endif 113 #define CONFIG_SPL_PAD_TO 0x20000 114 #define CONFIG_TPL_PAD_TO 0x20000 115 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 116 #define CONFIG_SYS_TEXT_BASE 0x11001000 117 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 118 #endif 119 120 /* High Level Configuration Options */ 121 #define CONFIG_BOOKE /* BOOKE */ 122 #define CONFIG_E500 /* BOOKE e500 family */ 123 #define CONFIG_P1022 124 #define CONFIG_P1022DS 125 #define CONFIG_MP /* support multiple processors */ 126 127 #ifndef CONFIG_SYS_TEXT_BASE 128 #define CONFIG_SYS_TEXT_BASE 0xeff40000 129 #endif 130 131 #ifndef CONFIG_RESET_VECTOR_ADDRESS 132 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 133 #endif 134 135 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 136 #define CONFIG_PCI /* Enable PCI/PCIE */ 137 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 138 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 139 #define CONFIG_PCIE3 /* PCIE controller 3 (ULI bridge) */ 140 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 141 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 142 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 143 144 #define CONFIG_ENABLE_36BIT_PHYS 145 146 #ifdef CONFIG_PHYS_64BIT 147 #define CONFIG_ADDR_MAP 148 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 149 #endif 150 151 #define CONFIG_FSL_LAW /* Use common FSL init code */ 152 153 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 154 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 155 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 156 157 /* 158 * These can be toggled for performance analysis, otherwise use default. 159 */ 160 #define CONFIG_L2_CACHE 161 #define CONFIG_BTB 162 163 #define CONFIG_SYS_MEMTEST_START 0x00000000 164 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 165 166 #define CONFIG_SYS_CCSRBAR 0xffe00000 167 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 168 169 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k 170 SPL code*/ 171 #ifdef CONFIG_SPL_BUILD 172 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 173 #endif 174 175 /* DDR Setup */ 176 #define CONFIG_DDR_SPD 177 #define CONFIG_VERY_BIG_RAM 178 #define CONFIG_SYS_FSL_DDR3 179 180 #ifdef CONFIG_DDR_ECC 181 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 182 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 183 #endif 184 185 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 186 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 187 188 #define CONFIG_NUM_DDR_CONTROLLERS 1 189 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 190 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 191 192 /* I2C addresses of SPD EEPROMs */ 193 #define CONFIG_SYS_SPD_BUS_NUM 1 194 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 195 196 /* These are used when DDR doesn't use SPD. */ 197 #define CONFIG_SYS_SDRAM_SIZE 2048 198 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G 199 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 200 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 201 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F 202 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 203 #define CONFIG_SYS_DDR_TIMING_3 0x00010000 204 #define CONFIG_SYS_DDR_TIMING_0 0x40110104 205 #define CONFIG_SYS_DDR_TIMING_1 0x5c5bd746 206 #define CONFIG_SYS_DDR_TIMING_2 0x0fa8d4ca 207 #define CONFIG_SYS_DDR_MODE_1 0x00441221 208 #define CONFIG_SYS_DDR_MODE_2 0x00000000 209 #define CONFIG_SYS_DDR_INTERVAL 0x0a280100 210 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 211 #define CONFIG_SYS_DDR_CLK_CTRL 0x02800000 212 #define CONFIG_SYS_DDR_CONTROL 0xc7000008 213 #define CONFIG_SYS_DDR_CONTROL_2 0x24401041 214 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 215 #define CONFIG_SYS_DDR_TIMING_5 0x02401400 216 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 217 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608 218 219 /* 220 * Memory map 221 * 222 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 223 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable 224 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable 225 * 226 * Localbus cacheable (TBD) 227 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 228 * 229 * Localbus non-cacheable 230 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 231 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 232 * 0xff80_0000 0xff80_7fff NAND 32K non-cacheable 233 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 234 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 235 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 236 */ 237 238 /* 239 * Local Bus Definitions 240 */ 241 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* start of FLASH 128M */ 242 #ifdef CONFIG_PHYS_64BIT 243 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull 244 #else 245 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 246 #endif 247 248 #define CONFIG_FLASH_BR_PRELIM \ 249 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 250 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7) 251 252 #ifdef CONFIG_NAND 253 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 254 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 255 #else 256 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 257 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 258 #endif 259 260 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 261 #define CONFIG_SYS_FLASH_QUIET_TEST 262 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 263 264 #define CONFIG_SYS_MAX_FLASH_BANKS 1 265 #define CONFIG_SYS_MAX_FLASH_SECT 1024 266 267 #ifndef CONFIG_SYS_MONITOR_BASE 268 #ifdef CONFIG_SPL_BUILD 269 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 270 #else 271 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 272 #endif 273 #endif 274 275 #define CONFIG_FLASH_CFI_DRIVER 276 #define CONFIG_SYS_FLASH_CFI 277 #define CONFIG_SYS_FLASH_EMPTY_INFO 278 279 /* Nand Flash */ 280 #if defined(CONFIG_NAND_FSL_ELBC) 281 #define CONFIG_SYS_NAND_BASE 0xff800000 282 #ifdef CONFIG_PHYS_64BIT 283 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 284 #else 285 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 286 #endif 287 288 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 289 #define CONFIG_SYS_MAX_NAND_DEVICE 1 290 #define CONFIG_CMD_NAND 1 291 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) 292 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE 293 294 /* NAND flash config */ 295 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 296 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 297 | BR_PS_8 /* Port Size = 8 bit */ \ 298 | BR_MS_FCM /* MSEL = FCM */ \ 299 | BR_V) /* valid */ 300 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* length 256K */ \ 301 | OR_FCM_PGS /* Large Page*/ \ 302 | OR_FCM_CSCT \ 303 | OR_FCM_CST \ 304 | OR_FCM_CHT \ 305 | OR_FCM_SCY_1 \ 306 | OR_FCM_TRLX \ 307 | OR_FCM_EHTR) 308 #ifdef CONFIG_NAND 309 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 310 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 311 #else 312 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 313 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 314 #endif 315 316 #endif /* CONFIG_NAND_FSL_ELBC */ 317 318 #define CONFIG_BOARD_EARLY_INIT_F 319 #define CONFIG_BOARD_EARLY_INIT_R 320 #define CONFIG_MISC_INIT_R 321 #define CONFIG_HWCONFIG 322 323 #define CONFIG_FSL_NGPIXIS 324 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 325 #ifdef CONFIG_PHYS_64BIT 326 #define PIXIS_BASE_PHYS 0xfffdf0000ull 327 #else 328 #define PIXIS_BASE_PHYS PIXIS_BASE 329 #endif 330 331 #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 332 #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7) 333 334 #define PIXIS_LBMAP_SWITCH 7 335 #define PIXIS_LBMAP_MASK 0xF0 336 #define PIXIS_LBMAP_ALTBANK 0x20 337 #define PIXIS_SPD 0x07 338 #define PIXIS_SPD_SYSCLK_MASK 0x07 339 #define PIXIS_ELBC_SPI_MASK 0xc0 340 #define PIXIS_SPI 0x80 341 342 #define CONFIG_SYS_INIT_RAM_LOCK 343 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 344 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 345 346 #define CONFIG_SYS_GBL_DATA_OFFSET \ 347 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 348 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 349 350 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 351 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 352 353 /* 354 * Config the L2 Cache as L2 SRAM 355 */ 356 #if defined(CONFIG_SPL_BUILD) 357 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 358 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 359 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 360 #define CONFIG_SYS_L2_SIZE (256 << 10) 361 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 362 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 363 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) 364 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 365 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) 366 #define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) 367 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 368 #elif defined(CONFIG_NAND) 369 #ifdef CONFIG_TPL_BUILD 370 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 371 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 372 #define CONFIG_SYS_L2_SIZE (256 << 10) 373 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 374 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 375 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 376 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 377 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 378 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 379 #else 380 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 381 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 382 #define CONFIG_SYS_L2_SIZE (256 << 10) 383 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 384 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) 385 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 386 #endif 387 #endif 388 #endif 389 390 /* 391 * Serial Port 392 */ 393 #define CONFIG_CONS_INDEX 1 394 #define CONFIG_SYS_NS16550_SERIAL 395 #define CONFIG_SYS_NS16550_REG_SIZE 1 396 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 397 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 398 #define CONFIG_NS16550_MIN_FUNCTIONS 399 #endif 400 401 #define CONFIG_SYS_BAUDRATE_TABLE \ 402 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 403 404 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 405 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 406 407 /* Video */ 408 409 #ifdef CONFIG_FSL_DIU_FB 410 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) 411 #define CONFIG_VIDEO 412 #define CONFIG_CMD_BMP 413 #define CONFIG_CFB_CONSOLE 414 #define CONFIG_VIDEO_SW_CURSOR 415 #define CONFIG_VGA_AS_SINGLE_DEVICE 416 #define CONFIG_VIDEO_LOGO 417 #define CONFIG_VIDEO_BMP_LOGO 418 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 419 /* 420 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 421 * disable empty flash sector detection, which is I/O-intensive. 422 */ 423 #undef CONFIG_SYS_FLASH_EMPTY_INFO 424 #endif 425 426 #ifndef CONFIG_FSL_DIU_FB 427 #endif 428 429 #ifdef CONFIG_ATI 430 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 431 #define CONFIG_VIDEO 432 #define CONFIG_BIOSEMU 433 #define CONFIG_VIDEO_SW_CURSOR 434 #define CONFIG_ATI_RADEON_FB 435 #define CONFIG_VIDEO_LOGO 436 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 437 #define CONFIG_CFB_CONSOLE 438 #define CONFIG_VGA_AS_SINGLE_DEVICE 439 #endif 440 441 /* I2C */ 442 #define CONFIG_SYS_I2C 443 #define CONFIG_SYS_I2C_FSL 444 #define CONFIG_SYS_FSL_I2C_SPEED 400000 445 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 446 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 447 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 448 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 449 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 450 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} 451 452 /* 453 * I2C2 EEPROM 454 */ 455 #define CONFIG_ID_EEPROM 456 #define CONFIG_SYS_I2C_EEPROM_NXID 457 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 458 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 459 #define CONFIG_SYS_EEPROM_BUS_NUM 1 460 461 /* 462 * eSPI - Enhanced SPI 463 */ 464 465 #define CONFIG_HARD_SPI 466 467 #define CONFIG_SF_DEFAULT_SPEED 10000000 468 #define CONFIG_SF_DEFAULT_MODE 0 469 470 /* 471 * General PCI 472 * Memory space is mapped 1-1, but I/O space must start from 0. 473 */ 474 475 /* controller 1, Slot 2, tgtid 1, Base address a000 */ 476 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 477 #ifdef CONFIG_PHYS_64BIT 478 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 479 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 480 #else 481 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 482 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 483 #endif 484 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 485 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 486 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 487 #ifdef CONFIG_PHYS_64BIT 488 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 489 #else 490 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 491 #endif 492 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 493 494 /* controller 2, direct to uli, tgtid 2, Base address 9000 */ 495 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 496 #ifdef CONFIG_PHYS_64BIT 497 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 498 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 499 #else 500 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 501 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 502 #endif 503 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 504 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 505 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 506 #ifdef CONFIG_PHYS_64BIT 507 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 508 #else 509 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 510 #endif 511 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 512 513 /* controller 3, Slot 1, tgtid 3, Base address b000 */ 514 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 515 #ifdef CONFIG_PHYS_64BIT 516 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 517 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 518 #else 519 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 520 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 521 #endif 522 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 523 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 524 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 525 #ifdef CONFIG_PHYS_64BIT 526 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 527 #else 528 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 529 #endif 530 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 531 532 #ifdef CONFIG_PCI 533 #define CONFIG_PCI_INDIRECT_BRIDGE 534 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 535 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 536 #endif 537 538 /* SATA */ 539 #define CONFIG_LIBATA 540 #define CONFIG_FSL_SATA 541 #define CONFIG_FSL_SATA_V2 542 543 #define CONFIG_SYS_SATA_MAX_DEVICE 2 544 #define CONFIG_SATA1 545 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 546 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 547 #define CONFIG_SATA2 548 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 549 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 550 551 #ifdef CONFIG_FSL_SATA 552 #define CONFIG_LBA48 553 #define CONFIG_CMD_SATA 554 #define CONFIG_DOS_PARTITION 555 #endif 556 557 #define CONFIG_MMC 558 #ifdef CONFIG_MMC 559 #define CONFIG_FSL_ESDHC 560 #define CONFIG_GENERIC_MMC 561 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 562 #endif 563 564 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 565 #define CONFIG_DOS_PARTITION 566 #endif 567 568 #define CONFIG_TSEC_ENET 569 #ifdef CONFIG_TSEC_ENET 570 571 #define CONFIG_TSECV2 572 573 #define CONFIG_MII /* MII PHY management */ 574 #define CONFIG_TSEC1 1 575 #define CONFIG_TSEC1_NAME "eTSEC1" 576 #define CONFIG_TSEC2 1 577 #define CONFIG_TSEC2_NAME "eTSEC2" 578 579 #define TSEC1_PHY_ADDR 1 580 #define TSEC2_PHY_ADDR 2 581 582 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 583 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 584 585 #define TSEC1_PHYIDX 0 586 #define TSEC2_PHYIDX 0 587 588 #define CONFIG_ETHPRIME "eTSEC1" 589 590 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 591 #endif 592 593 /* 594 * Dynamic MTD Partition support with mtdparts 595 */ 596 #define CONFIG_MTD_DEVICE 597 #define CONFIG_MTD_PARTITIONS 598 #define CONFIG_CMD_MTDPARTS 599 #define CONFIG_FLASH_CFI_MTD 600 #ifdef CONFIG_PHYS_64BIT 601 #define MTDIDS_DEFAULT "nor0=fe8000000.nor" 602 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \ 603 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 604 "512k(dtb),768k(u-boot)" 605 #else 606 #define MTDIDS_DEFAULT "nor0=e8000000.nor" 607 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \ 608 "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \ 609 "512k(dtb),768k(u-boot)" 610 #endif 611 612 /* 613 * Environment 614 */ 615 #ifdef CONFIG_SPIFLASH 616 #define CONFIG_ENV_IS_IN_SPI_FLASH 617 #define CONFIG_ENV_SPI_BUS 0 618 #define CONFIG_ENV_SPI_CS 0 619 #define CONFIG_ENV_SPI_MAX_HZ 10000000 620 #define CONFIG_ENV_SPI_MODE 0 621 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 622 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 623 #define CONFIG_ENV_SECT_SIZE 0x10000 624 #elif defined(CONFIG_SDCARD) 625 #define CONFIG_ENV_IS_IN_MMC 626 #define CONFIG_FSL_FIXED_MMC_LOCATION 627 #define CONFIG_ENV_SIZE 0x2000 628 #define CONFIG_SYS_MMC_ENV_DEV 0 629 #elif defined(CONFIG_NAND) 630 #ifdef CONFIG_TPL_BUILD 631 #define CONFIG_ENV_SIZE 0x2000 632 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 633 #else 634 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 635 #endif 636 #define CONFIG_ENV_IS_IN_NAND 637 #define CONFIG_ENV_OFFSET (1024 * 1024) 638 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 639 #elif defined(CONFIG_SYS_RAMBOOT) 640 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 641 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 642 #define CONFIG_ENV_SIZE 0x2000 643 #else 644 #define CONFIG_ENV_IS_IN_FLASH 645 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 646 #define CONFIG_ENV_SIZE 0x2000 647 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 648 #endif 649 650 #define CONFIG_LOADS_ECHO 651 #define CONFIG_SYS_LOADS_BAUD_CHANGE 652 653 /* 654 * Command line configuration. 655 */ 656 #define CONFIG_CMD_ERRATA 657 #define CONFIG_CMD_IRQ 658 #define CONFIG_CMD_REGINFO 659 660 #ifdef CONFIG_PCI 661 #define CONFIG_CMD_PCI 662 #endif 663 664 /* 665 * USB 666 */ 667 #define CONFIG_HAS_FSL_DR_USB 668 #ifdef CONFIG_HAS_FSL_DR_USB 669 #define CONFIG_USB_EHCI 670 671 #ifdef CONFIG_USB_EHCI 672 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 673 #define CONFIG_USB_EHCI_FSL 674 #define CONFIG_USB_STORAGE 675 #endif 676 #endif 677 678 /* 679 * Miscellaneous configurable options 680 */ 681 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 682 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 683 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 684 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 685 #ifdef CONFIG_CMD_KGDB 686 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 687 #else 688 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 689 #endif 690 /* Print Buffer Size */ 691 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 692 #define CONFIG_SYS_MAXARGS 16 693 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 694 695 /* 696 * For booting Linux, the board info and command line data 697 * have to be in the first 64 MB of memory, since this is 698 * the maximum mapped by the Linux kernel during initialization. 699 */ 700 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 701 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 702 703 #ifdef CONFIG_CMD_KGDB 704 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 705 #endif 706 707 /* 708 * Environment Configuration 709 */ 710 711 #define CONFIG_HOSTNAME p1022ds 712 #define CONFIG_ROOTPATH "/opt/nfsroot" 713 #define CONFIG_BOOTFILE "uImage" 714 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 715 716 #define CONFIG_LOADADDR 1000000 717 718 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 719 720 #define CONFIG_BAUDRATE 115200 721 722 #define CONFIG_EXTRA_ENV_SETTINGS \ 723 "netdev=eth0\0" \ 724 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 725 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 726 "tftpflash=tftpboot $loadaddr $uboot && " \ 727 "protect off $ubootaddr +$filesize && " \ 728 "erase $ubootaddr +$filesize && " \ 729 "cp.b $loadaddr $ubootaddr $filesize && " \ 730 "protect on $ubootaddr +$filesize && " \ 731 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 732 "consoledev=ttyS0\0" \ 733 "ramdiskaddr=2000000\0" \ 734 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 735 "fdtaddr=c00000\0" \ 736 "fdtfile=p1022ds.dtb\0" \ 737 "bdev=sda3\0" \ 738 "hwconfig=esdhc;audclk:12\0" 739 740 #define CONFIG_HDBOOT \ 741 "setenv bootargs root=/dev/$bdev rw " \ 742 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 743 "tftp $loadaddr $bootfile;" \ 744 "tftp $fdtaddr $fdtfile;" \ 745 "bootm $loadaddr - $fdtaddr" 746 747 #define CONFIG_NFSBOOTCOMMAND \ 748 "setenv bootargs root=/dev/nfs rw " \ 749 "nfsroot=$serverip:$rootpath " \ 750 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 751 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 752 "tftp $loadaddr $bootfile;" \ 753 "tftp $fdtaddr $fdtfile;" \ 754 "bootm $loadaddr - $fdtaddr" 755 756 #define CONFIG_RAMBOOTCOMMAND \ 757 "setenv bootargs root=/dev/ram rw " \ 758 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \ 759 "tftp $ramdiskaddr $ramdiskfile;" \ 760 "tftp $loadaddr $bootfile;" \ 761 "tftp $fdtaddr $fdtfile;" \ 762 "bootm $loadaddr $ramdiskaddr $fdtaddr" 763 764 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 765 766 #endif 767