1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * P010 RDB board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include <asm/config_mpc85xx.h> 15 #define CONFIG_NAND_FSL_IFC 16 17 #ifdef CONFIG_SDCARD 18 #define CONFIG_SPL_MMC_MINIMAL 19 #define CONFIG_SPL_FLUSH_IMAGE 20 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 21 #define CONFIG_SYS_TEXT_BASE 0x11001000 22 #define CONFIG_SPL_TEXT_BASE 0xD0001000 23 #define CONFIG_SPL_PAD_TO 0x18000 24 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 25 #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) 26 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 27 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 28 #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) 29 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 30 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 31 #define CONFIG_SPL_MMC_BOOT 32 #ifdef CONFIG_SPL_BUILD 33 #define CONFIG_SPL_COMMON_INIT_DDR 34 #endif 35 #endif 36 37 #ifdef CONFIG_SPIFLASH 38 #ifdef CONFIG_SECURE_BOOT 39 #define CONFIG_RAMBOOT_SPIFLASH 40 #define CONFIG_SYS_TEXT_BASE 0x11000000 41 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 42 #else 43 #define CONFIG_SPL_SPI_FLASH_MINIMAL 44 #define CONFIG_SPL_FLUSH_IMAGE 45 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 46 #define CONFIG_SYS_TEXT_BASE 0x11001000 47 #define CONFIG_SPL_TEXT_BASE 0xD0001000 48 #define CONFIG_SPL_PAD_TO 0x18000 49 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 50 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) 51 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 52 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 53 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) 54 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 55 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 56 #define CONFIG_SPL_SPI_BOOT 57 #ifdef CONFIG_SPL_BUILD 58 #define CONFIG_SPL_COMMON_INIT_DDR 59 #endif 60 #endif 61 #endif 62 63 #ifdef CONFIG_NAND 64 #ifdef CONFIG_SECURE_BOOT 65 #define CONFIG_SPL_INIT_MINIMAL 66 #define CONFIG_SPL_NAND_BOOT 67 #define CONFIG_SPL_FLUSH_IMAGE 68 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 69 70 #define CONFIG_SYS_TEXT_BASE 0x00201000 71 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 72 #define CONFIG_SPL_MAX_SIZE 8192 73 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 74 #define CONFIG_SPL_RELOC_STACK 0x00100000 75 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 76 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 77 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 78 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 79 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 80 #else 81 #ifdef CONFIG_TPL_BUILD 82 #define CONFIG_SPL_NAND_BOOT 83 #define CONFIG_SPL_FLUSH_IMAGE 84 #define CONFIG_SPL_NAND_INIT 85 #define CONFIG_SPL_COMMON_INIT_DDR 86 #define CONFIG_SPL_MAX_SIZE (128 << 10) 87 #define CONFIG_SPL_TEXT_BASE 0xD0001000 88 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 89 #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) 90 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 91 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 92 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 93 #elif defined(CONFIG_SPL_BUILD) 94 #define CONFIG_SPL_INIT_MINIMAL 95 #define CONFIG_SPL_NAND_MINIMAL 96 #define CONFIG_SPL_FLUSH_IMAGE 97 #define CONFIG_SPL_TEXT_BASE 0xff800000 98 #define CONFIG_SPL_MAX_SIZE 8192 99 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 100 #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 101 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 102 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 103 #endif 104 #define CONFIG_SPL_PAD_TO 0x20000 105 #define CONFIG_TPL_PAD_TO 0x20000 106 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 107 #define CONFIG_SYS_TEXT_BASE 0x11001000 108 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 109 #endif 110 #endif 111 112 #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ 113 #define CONFIG_RAMBOOT_NAND 114 #define CONFIG_SYS_TEXT_BASE 0x11000000 115 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 116 #endif 117 118 #ifndef CONFIG_SYS_TEXT_BASE 119 #define CONFIG_SYS_TEXT_BASE 0xeff40000 120 #endif 121 122 #ifndef CONFIG_RESET_VECTOR_ADDRESS 123 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 124 #endif 125 126 #ifdef CONFIG_SPL_BUILD 127 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 128 #else 129 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 130 #endif 131 132 /* High Level Configuration Options */ 133 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 134 135 #if defined(CONFIG_PCI) 136 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 137 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 138 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 139 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 140 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 141 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 142 143 #define CONFIG_CMD_PCI 144 145 /* 146 * PCI Windows 147 * Memory space is mapped 1-1, but I/O space must start from 0. 148 */ 149 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 150 #define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" 151 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 152 #ifdef CONFIG_PHYS_64BIT 153 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 154 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 155 #else 156 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 157 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 158 #endif 159 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 160 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 161 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 162 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 163 #ifdef CONFIG_PHYS_64BIT 164 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 165 #else 166 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 167 #endif 168 169 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 170 #if defined(CONFIG_TARGET_P1010RDB_PA) 171 #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" 172 #elif defined(CONFIG_TARGET_P1010RDB_PB) 173 #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" 174 #endif 175 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 176 #ifdef CONFIG_PHYS_64BIT 177 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 178 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 179 #else 180 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 181 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 182 #endif 183 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 184 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 185 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 186 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 187 #ifdef CONFIG_PHYS_64BIT 188 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 189 #else 190 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 191 #endif 192 193 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 194 #endif 195 196 #define CONFIG_TSEC_ENET 197 #define CONFIG_ENV_OVERWRITE 198 199 #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ 200 #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ 201 202 #define CONFIG_MISC_INIT_R 203 #define CONFIG_HWCONFIG 204 /* 205 * These can be toggled for performance analysis, otherwise use default. 206 */ 207 #define CONFIG_L2_CACHE /* toggle L2 cache */ 208 #define CONFIG_BTB /* toggle branch predition */ 209 210 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 211 212 #define CONFIG_ENABLE_36BIT_PHYS 213 214 #ifdef CONFIG_PHYS_64BIT 215 #define CONFIG_ADDR_MAP 1 216 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 217 #endif 218 219 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 220 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 221 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 222 223 /* DDR Setup */ 224 #define CONFIG_SYS_DDR_RAW_TIMING 225 #define CONFIG_DDR_SPD 226 #define CONFIG_SYS_SPD_BUS_NUM 1 227 #define SPD_EEPROM_ADDRESS 0x52 228 229 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 230 231 #ifndef __ASSEMBLY__ 232 extern unsigned long get_sdram_size(void); 233 #endif 234 #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ 235 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 236 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 237 238 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 239 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 240 241 /* DDR3 Controller Settings */ 242 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 243 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 244 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 245 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 246 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 247 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 248 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 249 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 250 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 251 #define CONFIG_SYS_DDR_RCW_1 0x00000000 252 #define CONFIG_SYS_DDR_RCW_2 0x00000000 253 #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ 254 #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 255 #define CONFIG_SYS_DDR_TIMING_4 0x00000001 256 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 257 258 #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 259 #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 260 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 261 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF 262 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 263 #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 264 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 265 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 266 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 267 268 /* settings for DDR3 at 667MT/s */ 269 #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 270 #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004 271 #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544 272 #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD 273 #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 274 #define CONFIG_SYS_DDR_MODE_1_667 0x00441210 275 #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 276 #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000 277 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608 278 279 #define CONFIG_SYS_CCSRBAR 0xffe00000 280 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 281 282 /* Don't relocate CCSRBAR while in NAND_SPL */ 283 #ifdef CONFIG_SPL_BUILD 284 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 285 #endif 286 287 /* 288 * Memory map 289 * 290 * 0x0000_0000 0x3fff_ffff DDR 1G cacheable 291 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable 292 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 293 * 294 * Localbus non-cacheable 295 * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable 296 * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable 297 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 298 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 299 */ 300 301 /* 302 * IFC Definitions 303 */ 304 /* NOR Flash on IFC */ 305 306 #define CONFIG_SYS_FLASH_BASE 0xee000000 307 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 308 309 #ifdef CONFIG_PHYS_64BIT 310 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 311 #else 312 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 313 #endif 314 315 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 316 CSPR_PORT_SIZE_16 | \ 317 CSPR_MSEL_NOR | \ 318 CSPR_V) 319 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024) 320 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7) 321 /* NOR Flash Timing Params */ 322 #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \ 323 FTIM0_NOR_TEADC(0x5) | \ 324 FTIM0_NOR_TEAHC(0x5) 325 #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \ 326 FTIM1_NOR_TRAD_NOR(0x0f) 327 #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \ 328 FTIM2_NOR_TCH(0x4) | \ 329 FTIM2_NOR_TWP(0x1c) 330 #define CONFIG_SYS_NOR_FTIM3 0x0 331 332 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 333 #define CONFIG_SYS_FLASH_QUIET_TEST 334 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 335 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 336 337 #undef CONFIG_SYS_FLASH_CHECKSUM 338 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 339 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 340 341 /* CFI for NOR Flash */ 342 #define CONFIG_FLASH_CFI_DRIVER 343 #define CONFIG_SYS_FLASH_CFI 344 #define CONFIG_SYS_FLASH_EMPTY_INFO 345 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 346 347 /* NAND Flash on IFC */ 348 #define CONFIG_SYS_NAND_BASE 0xff800000 349 #ifdef CONFIG_PHYS_64BIT 350 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 351 #else 352 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 353 #endif 354 355 #define CONFIG_MTD_DEVICE 356 #define CONFIG_MTD_PARTITION 357 #define CONFIG_CMD_MTDPARTS 358 #define MTDIDS_DEFAULT "nand0=ff800000.flash" 359 #define MTDPARTS_DEFAULT \ 360 "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" 361 362 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 363 | CSPR_PORT_SIZE_8 \ 364 | CSPR_MSEL_NAND \ 365 | CSPR_V) 366 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 367 368 #if defined(CONFIG_TARGET_P1010RDB_PA) 369 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 370 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 371 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 372 | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ 373 | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ 374 | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ 375 | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ 376 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 377 378 #elif defined(CONFIG_TARGET_P1010RDB_PB) 379 #define CONFIG_SYS_NAND_ONFI_DETECTION 380 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 381 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 382 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 383 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 384 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 385 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 386 | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ 387 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 388 #endif 389 390 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 391 #define CONFIG_SYS_MAX_NAND_DEVICE 1 392 #define CONFIG_CMD_NAND 393 394 #if defined(CONFIG_TARGET_P1010RDB_PA) 395 /* NAND Flash Timing Params */ 396 #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ 397 FTIM0_NAND_TWP(0x0C) | \ 398 FTIM0_NAND_TWCHT(0x04) | \ 399 FTIM0_NAND_TWH(0x05) 400 #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \ 401 FTIM1_NAND_TWBE(0x1d) | \ 402 FTIM1_NAND_TRR(0x07) | \ 403 FTIM1_NAND_TRP(0x0c) 404 #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \ 405 FTIM2_NAND_TREH(0x05) | \ 406 FTIM2_NAND_TWHRE(0x0f) 407 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 408 409 #elif defined(CONFIG_TARGET_P1010RDB_PB) 410 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ 411 /* ONFI NAND Flash mode0 Timing Params */ 412 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ 413 FTIM0_NAND_TWP(0x18) | \ 414 FTIM0_NAND_TWCHT(0x07) | \ 415 FTIM0_NAND_TWH(0x0a)) 416 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ 417 FTIM1_NAND_TWBE(0x39) | \ 418 FTIM1_NAND_TRR(0x0e) | \ 419 FTIM1_NAND_TRP(0x18)) 420 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 421 FTIM2_NAND_TREH(0x0a) | \ 422 FTIM2_NAND_TWHRE(0x1e)) 423 #define CONFIG_SYS_NAND_FTIM3 0x0 424 #endif 425 426 #define CONFIG_SYS_NAND_DDR_LAW 11 427 428 /* Set up IFC registers for boot location NOR/NAND */ 429 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 430 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 431 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 432 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 433 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 434 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 435 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 436 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 437 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 438 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 439 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 440 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 441 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 442 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 443 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 444 #else 445 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 446 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 447 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 448 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 449 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 450 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 451 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 452 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 453 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 454 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 455 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 456 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 457 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 458 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 459 #endif 460 461 /* CPLD on IFC */ 462 #define CONFIG_SYS_CPLD_BASE 0xffb00000 463 464 #ifdef CONFIG_PHYS_64BIT 465 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull 466 #else 467 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 468 #endif 469 470 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 471 | CSPR_PORT_SIZE_8 \ 472 | CSPR_MSEL_GPCM \ 473 | CSPR_V) 474 #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) 475 #define CONFIG_SYS_CSOR3 0x0 476 /* CPLD Timing parameters for IFC CS3 */ 477 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 478 FTIM0_GPCM_TEADC(0x0e) | \ 479 FTIM0_GPCM_TEAHC(0x0e)) 480 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 481 FTIM1_GPCM_TRAD(0x1f)) 482 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 483 FTIM2_GPCM_TCH(0x8) | \ 484 FTIM2_GPCM_TWP(0x1f)) 485 #define CONFIG_SYS_CS3_FTIM3 0x0 486 487 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ 488 defined(CONFIG_RAMBOOT_NAND) 489 #define CONFIG_SYS_RAMBOOT 490 #define CONFIG_SYS_EXTRA_ENV_RELOC 491 #else 492 #undef CONFIG_SYS_RAMBOOT 493 #endif 494 495 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 496 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) 497 #define CONFIG_A003399_NOR_WORKAROUND 498 #endif 499 #endif 500 501 #define CONFIG_BOARD_EARLY_INIT_R 502 503 #define CONFIG_SYS_INIT_RAM_LOCK 504 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 505 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ 506 507 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ 508 - GENERATED_GBL_DATA_SIZE) 509 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 510 511 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 512 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 513 514 /* 515 * Config the L2 Cache as L2 SRAM 516 */ 517 #if defined(CONFIG_SPL_BUILD) 518 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 519 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 520 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 521 #define CONFIG_SYS_L2_SIZE (256 << 10) 522 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 523 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 524 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 525 #define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10) 526 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 527 #define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) 528 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) 529 #elif defined(CONFIG_NAND) 530 #ifdef CONFIG_TPL_BUILD 531 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 532 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 533 #define CONFIG_SYS_L2_SIZE (256 << 10) 534 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 535 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 536 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 537 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 538 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 539 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 540 #else 541 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 542 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 543 #define CONFIG_SYS_L2_SIZE (256 << 10) 544 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 545 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 546 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 547 #endif 548 #endif 549 #endif 550 551 /* Serial Port */ 552 #define CONFIG_CONS_INDEX 1 553 #undef CONFIG_SERIAL_SOFTWARE_FIFO 554 #define CONFIG_SYS_NS16550_SERIAL 555 #define CONFIG_SYS_NS16550_REG_SIZE 1 556 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 557 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 558 #define CONFIG_NS16550_MIN_FUNCTIONS 559 #endif 560 561 #define CONFIG_SYS_BAUDRATE_TABLE \ 562 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 563 564 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 565 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 566 567 /* I2C */ 568 #define CONFIG_SYS_I2C 569 #define CONFIG_SYS_I2C_FSL 570 #define CONFIG_SYS_FSL_I2C_SPEED 400000 571 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 572 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 573 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 574 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 575 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 576 #define I2C_PCA9557_ADDR1 0x18 577 #define I2C_PCA9557_ADDR2 0x19 578 #define I2C_PCA9557_BUS_NUM 0 579 580 /* I2C EEPROM */ 581 #if defined(CONFIG_TARGET_P1010RDB_PB) 582 #define CONFIG_ID_EEPROM 583 #ifdef CONFIG_ID_EEPROM 584 #define CONFIG_SYS_I2C_EEPROM_NXID 585 #endif 586 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 587 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 588 #define CONFIG_SYS_EEPROM_BUS_NUM 0 589 #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ 590 #endif 591 /* enable read and write access to EEPROM */ 592 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 593 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 594 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 595 596 /* RTC */ 597 #define CONFIG_RTC_PT7C4338 598 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 599 600 /* 601 * SPI interface will not be available in case of NAND boot SPI CS0 will be 602 * used for SLIC 603 */ 604 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) 605 /* eSPI - Enhanced SPI */ 606 #define CONFIG_SF_DEFAULT_SPEED 10000000 607 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 608 #endif 609 610 #if defined(CONFIG_TSEC_ENET) 611 #define CONFIG_MII /* MII PHY management */ 612 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 613 #define CONFIG_TSEC1 1 614 #define CONFIG_TSEC1_NAME "eTSEC1" 615 #define CONFIG_TSEC2 1 616 #define CONFIG_TSEC2_NAME "eTSEC2" 617 #define CONFIG_TSEC3 1 618 #define CONFIG_TSEC3_NAME "eTSEC3" 619 620 #define TSEC1_PHY_ADDR 1 621 #define TSEC2_PHY_ADDR 0 622 #define TSEC3_PHY_ADDR 2 623 624 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 625 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 626 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 627 628 #define TSEC1_PHYIDX 0 629 #define TSEC2_PHYIDX 0 630 #define TSEC3_PHYIDX 0 631 632 #define CONFIG_ETHPRIME "eTSEC1" 633 634 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 635 636 /* TBI PHY configuration for SGMII mode */ 637 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 638 TBICR_PHY_RESET \ 639 | TBICR_ANEG_ENABLE \ 640 | TBICR_FULL_DUPLEX \ 641 | TBICR_SPEED1_SET \ 642 ) 643 644 #endif /* CONFIG_TSEC_ENET */ 645 646 /* SATA */ 647 #define CONFIG_FSL_SATA 648 #define CONFIG_FSL_SATA_V2 649 #define CONFIG_LIBATA 650 651 #ifdef CONFIG_FSL_SATA 652 #define CONFIG_SYS_SATA_MAX_DEVICE 2 653 #define CONFIG_SATA1 654 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 655 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 656 #define CONFIG_SATA2 657 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 658 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 659 660 #define CONFIG_CMD_SATA 661 #define CONFIG_LBA48 662 #endif /* #ifdef CONFIG_FSL_SATA */ 663 664 #ifdef CONFIG_MMC 665 #define CONFIG_FSL_ESDHC 666 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 667 #endif 668 669 #define CONFIG_HAS_FSL_DR_USB 670 671 #if defined(CONFIG_HAS_FSL_DR_USB) 672 #ifdef CONFIG_USB_EHCI_HCD 673 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 674 #define CONFIG_USB_EHCI_FSL 675 #endif 676 #endif 677 678 /* 679 * Environment 680 */ 681 #if defined(CONFIG_SDCARD) 682 #define CONFIG_ENV_IS_IN_MMC 683 #define CONFIG_FSL_FIXED_MMC_LOCATION 684 #define CONFIG_SYS_MMC_ENV_DEV 0 685 #define CONFIG_ENV_SIZE 0x2000 686 #elif defined(CONFIG_SPIFLASH) 687 #define CONFIG_ENV_IS_IN_SPI_FLASH 688 #define CONFIG_ENV_SPI_BUS 0 689 #define CONFIG_ENV_SPI_CS 0 690 #define CONFIG_ENV_SPI_MAX_HZ 10000000 691 #define CONFIG_ENV_SPI_MODE 0 692 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 693 #define CONFIG_ENV_SECT_SIZE 0x10000 694 #define CONFIG_ENV_SIZE 0x2000 695 #elif defined(CONFIG_NAND) 696 #define CONFIG_ENV_IS_IN_NAND 697 #ifdef CONFIG_TPL_BUILD 698 #define CONFIG_ENV_SIZE 0x2000 699 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 700 #else 701 #if defined(CONFIG_TARGET_P1010RDB_PA) 702 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 703 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ 704 #elif defined(CONFIG_TARGET_P1010RDB_PB) 705 #define CONFIG_ENV_SIZE (16 * 1024) 706 #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ 707 #endif 708 #endif 709 #define CONFIG_ENV_OFFSET (1024 * 1024) 710 #elif defined(CONFIG_SYS_RAMBOOT) 711 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 712 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 713 #define CONFIG_ENV_SIZE 0x2000 714 #else 715 #define CONFIG_ENV_IS_IN_FLASH 716 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 717 #define CONFIG_ENV_SIZE 0x2000 718 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 719 #endif 720 721 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 722 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 723 724 /* 725 * Command line configuration. 726 */ 727 #define CONFIG_CMD_REGINFO 728 729 #undef CONFIG_WATCHDOG /* watchdog disabled */ 730 731 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \ 732 || defined(CONFIG_FSL_SATA) 733 #endif 734 735 /* 736 * Miscellaneous configurable options 737 */ 738 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 739 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 740 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 741 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 742 743 #if defined(CONFIG_CMD_KGDB) 744 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 745 #else 746 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 747 #endif 748 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 749 /* Print Buffer Size */ 750 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 751 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 752 753 /* 754 * For booting Linux, the board info and command line data 755 * have to be in the first 64 MB of memory, since this is 756 * the maximum mapped by the Linux kernel during initialization. 757 */ 758 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 759 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 760 761 #if defined(CONFIG_CMD_KGDB) 762 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 763 #endif 764 765 /* 766 * Environment Configuration 767 */ 768 769 #if defined(CONFIG_TSEC_ENET) 770 #define CONFIG_HAS_ETH0 771 #define CONFIG_HAS_ETH1 772 #define CONFIG_HAS_ETH2 773 #endif 774 775 #define CONFIG_ROOTPATH "/opt/nfsroot" 776 #define CONFIG_BOOTFILE "uImage" 777 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 778 779 /* default location for tftp and bootm */ 780 #define CONFIG_LOADADDR 1000000 781 782 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 783 784 #define CONFIG_EXTRA_ENV_SETTINGS \ 785 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 786 "netdev=eth0\0" \ 787 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 788 "loadaddr=1000000\0" \ 789 "consoledev=ttyS0\0" \ 790 "ramdiskaddr=2000000\0" \ 791 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 792 "fdtaddr=1e00000\0" \ 793 "fdtfile=p1010rdb.dtb\0" \ 794 "bdev=sda1\0" \ 795 "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \ 796 "othbootargs=ramdisk_size=600000\0" \ 797 "usbfatboot=setenv bootargs root=/dev/ram rw " \ 798 "console=$consoledev,$baudrate $othbootargs; " \ 799 "usb start;" \ 800 "fatload usb 0:2 $loadaddr $bootfile;" \ 801 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 802 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 803 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 804 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 805 "console=$consoledev,$baudrate $othbootargs; " \ 806 "usb start;" \ 807 "ext2load usb 0:4 $loadaddr $bootfile;" \ 808 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 809 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 810 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 811 CONFIG_BOOTMODE 812 813 #if defined(CONFIG_TARGET_P1010RDB_PA) 814 #define CONFIG_BOOTMODE \ 815 "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 816 "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ 817 "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 818 "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ 819 "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ 820 "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" 821 822 #elif defined(CONFIG_TARGET_P1010RDB_PB) 823 #define CONFIG_BOOTMODE \ 824 "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 825 "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ 826 "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 827 "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ 828 "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ 829 "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ 830 "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ 831 "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ 832 "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ 833 "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" 834 #endif 835 836 #define CONFIG_RAMBOOTCOMMAND \ 837 "setenv bootargs root=/dev/ram rw " \ 838 "console=$consoledev,$baudrate $othbootargs; " \ 839 "tftp $ramdiskaddr $ramdiskfile;" \ 840 "tftp $loadaddr $bootfile;" \ 841 "tftp $fdtaddr $fdtfile;" \ 842 "bootm $loadaddr $ramdiskaddr $fdtaddr" 843 844 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 845 846 #include <asm/fsl_secure_boot.h> 847 848 #endif /* __CONFIG_H */ 849