1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * P010 RDB board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_36BIT 15 #define CONFIG_PHYS_64BIT 16 #endif 17 #define CONFIG_SYS_GENERIC_BOARD 18 #define CONFIG_DISPLAY_BOARDINFO 19 20 #define CONFIG_P1010 21 #define CONFIG_E500 /* BOOKE e500 family */ 22 #include <asm/config_mpc85xx.h> 23 #define CONFIG_NAND_FSL_IFC 24 25 #ifdef CONFIG_SDCARD 26 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 27 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 28 #define CONFIG_SPL_ENV_SUPPORT 29 #define CONFIG_SPL_SERIAL_SUPPORT 30 #define CONFIG_SPL_MMC_SUPPORT 31 #define CONFIG_SPL_MMC_MINIMAL 32 #define CONFIG_SPL_FLUSH_IMAGE 33 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 34 #define CONFIG_SPL_LIBGENERIC_SUPPORT 35 #define CONFIG_SPL_LIBCOMMON_SUPPORT 36 #define CONFIG_SPL_I2C_SUPPORT 37 #define CONFIG_FSL_LAW /* Use common FSL init code */ 38 #define CONFIG_SYS_TEXT_BASE 0x11001000 39 #define CONFIG_SPL_TEXT_BASE 0xD0001000 40 #define CONFIG_SPL_PAD_TO 0x18000 41 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 42 #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) 43 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 44 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 45 #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) 46 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 47 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 48 #define CONFIG_SPL_MMC_BOOT 49 #ifdef CONFIG_SPL_BUILD 50 #define CONFIG_SPL_COMMON_INIT_DDR 51 #endif 52 #endif 53 54 #ifdef CONFIG_SPIFLASH 55 #ifdef CONFIG_SECURE_BOOT 56 #define CONFIG_RAMBOOT_SPIFLASH 57 #define CONFIG_SYS_TEXT_BASE 0x11000000 58 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 59 #else 60 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 61 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 62 #define CONFIG_SPL_ENV_SUPPORT 63 #define CONFIG_SPL_SERIAL_SUPPORT 64 #define CONFIG_SPL_SPI_SUPPORT 65 #define CONFIG_SPL_SPI_FLASH_SUPPORT 66 #define CONFIG_SPL_SPI_FLASH_MINIMAL 67 #define CONFIG_SPL_FLUSH_IMAGE 68 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 69 #define CONFIG_SPL_LIBGENERIC_SUPPORT 70 #define CONFIG_SPL_LIBCOMMON_SUPPORT 71 #define CONFIG_SPL_I2C_SUPPORT 72 #define CONFIG_FSL_LAW /* Use common FSL init code */ 73 #define CONFIG_SYS_TEXT_BASE 0x11001000 74 #define CONFIG_SPL_TEXT_BASE 0xD0001000 75 #define CONFIG_SPL_PAD_TO 0x18000 76 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) 78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) 81 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 82 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 83 #define CONFIG_SPL_SPI_BOOT 84 #ifdef CONFIG_SPL_BUILD 85 #define CONFIG_SPL_COMMON_INIT_DDR 86 #endif 87 #endif 88 #endif 89 90 #ifdef CONFIG_NAND 91 #ifdef CONFIG_SECURE_BOOT 92 #define CONFIG_SPL_INIT_MINIMAL 93 #define CONFIG_SPL_SERIAL_SUPPORT 94 #define CONFIG_SPL_NAND_SUPPORT 95 #define CONFIG_SPL_NAND_BOOT 96 #define CONFIG_SPL_FLUSH_IMAGE 97 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 98 99 #define CONFIG_SYS_TEXT_BASE 0x00201000 100 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 101 #define CONFIG_SPL_MAX_SIZE 8192 102 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 103 #define CONFIG_SPL_RELOC_STACK 0x00100000 104 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 105 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 106 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 107 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 108 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 109 #else 110 #ifdef CONFIG_TPL_BUILD 111 #define CONFIG_SPL_NAND_BOOT 112 #define CONFIG_SPL_FLUSH_IMAGE 113 #define CONFIG_SPL_ENV_SUPPORT 114 #define CONFIG_SPL_NAND_INIT 115 #define CONFIG_SPL_SERIAL_SUPPORT 116 #define CONFIG_SPL_LIBGENERIC_SUPPORT 117 #define CONFIG_SPL_LIBCOMMON_SUPPORT 118 #define CONFIG_SPL_I2C_SUPPORT 119 #define CONFIG_SPL_NAND_SUPPORT 120 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 121 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 122 #define CONFIG_SPL_COMMON_INIT_DDR 123 #define CONFIG_SPL_MAX_SIZE (128 << 10) 124 #define CONFIG_SPL_TEXT_BASE 0xD0001000 125 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 126 #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) 127 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 128 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 129 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 130 #elif defined(CONFIG_SPL_BUILD) 131 #define CONFIG_SPL_INIT_MINIMAL 132 #define CONFIG_SPL_SERIAL_SUPPORT 133 #define CONFIG_SPL_NAND_SUPPORT 134 #define CONFIG_SPL_NAND_MINIMAL 135 #define CONFIG_SPL_FLUSH_IMAGE 136 #define CONFIG_SPL_TEXT_BASE 0xff800000 137 #define CONFIG_SPL_MAX_SIZE 8192 138 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 139 #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 140 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 141 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 142 #endif 143 #define CONFIG_SPL_PAD_TO 0x20000 144 #define CONFIG_TPL_PAD_TO 0x20000 145 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 146 #define CONFIG_SYS_TEXT_BASE 0x11001000 147 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 148 #endif 149 #endif 150 151 #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ 152 #define CONFIG_RAMBOOT_NAND 153 #define CONFIG_SYS_TEXT_BASE 0x11000000 154 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 155 #endif 156 157 #ifndef CONFIG_SYS_TEXT_BASE 158 #define CONFIG_SYS_TEXT_BASE 0xeff40000 159 #endif 160 161 #ifndef CONFIG_RESET_VECTOR_ADDRESS 162 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 163 #endif 164 165 #ifdef CONFIG_SPL_BUILD 166 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 167 #else 168 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 169 #endif 170 171 /* High Level Configuration Options */ 172 #define CONFIG_BOOKE /* BOOKE */ 173 #define CONFIG_E500 /* BOOKE e500 family */ 174 #define CONFIG_FSL_IFC /* Enable IFC Support */ 175 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 176 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 177 178 #define CONFIG_PCI /* Enable PCI/PCIE */ 179 #if defined(CONFIG_PCI) 180 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 181 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ 182 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 183 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 184 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 185 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 186 187 #define CONFIG_CMD_PCI 188 189 #define CONFIG_E1000 /* E1000 pci Ethernet card*/ 190 191 /* 192 * PCI Windows 193 * Memory space is mapped 1-1, but I/O space must start from 0. 194 */ 195 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 196 #define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" 197 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 198 #ifdef CONFIG_PHYS_64BIT 199 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 200 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 201 #else 202 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 203 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 204 #endif 205 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 206 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 207 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 208 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 209 #ifdef CONFIG_PHYS_64BIT 210 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 211 #else 212 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 213 #endif 214 215 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 216 #if defined(CONFIG_P1010RDB_PA) 217 #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" 218 #elif defined(CONFIG_P1010RDB_PB) 219 #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" 220 #endif 221 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 222 #ifdef CONFIG_PHYS_64BIT 223 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 224 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 225 #else 226 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 227 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 228 #endif 229 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 230 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 231 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 232 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 233 #ifdef CONFIG_PHYS_64BIT 234 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 235 #else 236 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 237 #endif 238 239 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 240 241 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 242 #define CONFIG_DOS_PARTITION 243 #endif 244 245 #define CONFIG_FSL_LAW /* Use common FSL init code */ 246 #define CONFIG_TSEC_ENET 247 #define CONFIG_ENV_OVERWRITE 248 249 #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ 250 #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ 251 252 #define CONFIG_MISC_INIT_R 253 #define CONFIG_HWCONFIG 254 /* 255 * These can be toggled for performance analysis, otherwise use default. 256 */ 257 #define CONFIG_L2_CACHE /* toggle L2 cache */ 258 #define CONFIG_BTB /* toggle branch predition */ 259 260 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 261 262 #define CONFIG_ENABLE_36BIT_PHYS 263 264 #ifdef CONFIG_PHYS_64BIT 265 #define CONFIG_ADDR_MAP 1 266 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 267 #endif 268 269 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 270 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 271 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 272 273 /* DDR Setup */ 274 #define CONFIG_SYS_FSL_DDR3 275 #define CONFIG_SYS_DDR_RAW_TIMING 276 #define CONFIG_DDR_SPD 277 #define CONFIG_SYS_SPD_BUS_NUM 1 278 #define SPD_EEPROM_ADDRESS 0x52 279 280 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 281 282 #ifndef __ASSEMBLY__ 283 extern unsigned long get_sdram_size(void); 284 #endif 285 #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ 286 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 287 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 288 289 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 290 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 291 292 /* DDR3 Controller Settings */ 293 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 294 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 295 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 296 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 297 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 298 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 299 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 300 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 301 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 302 #define CONFIG_SYS_DDR_RCW_1 0x00000000 303 #define CONFIG_SYS_DDR_RCW_2 0x00000000 304 #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ 305 #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 306 #define CONFIG_SYS_DDR_TIMING_4 0x00000001 307 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 308 309 #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 310 #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 311 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 312 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF 313 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 314 #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 315 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 316 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 317 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 318 319 /* settings for DDR3 at 667MT/s */ 320 #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 321 #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004 322 #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544 323 #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD 324 #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 325 #define CONFIG_SYS_DDR_MODE_1_667 0x00441210 326 #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 327 #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000 328 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608 329 330 #define CONFIG_SYS_CCSRBAR 0xffe00000 331 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 332 333 /* Don't relocate CCSRBAR while in NAND_SPL */ 334 #ifdef CONFIG_SPL_BUILD 335 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 336 #endif 337 338 /* 339 * Memory map 340 * 341 * 0x0000_0000 0x3fff_ffff DDR 1G cacheable 342 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable 343 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 344 * 345 * Localbus non-cacheable 346 * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable 347 * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable 348 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 349 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 350 */ 351 352 /* 353 * IFC Definitions 354 */ 355 /* NOR Flash on IFC */ 356 #ifdef CONFIG_SPL_BUILD 357 #define CONFIG_SYS_NO_FLASH 358 #endif 359 360 #define CONFIG_SYS_FLASH_BASE 0xee000000 361 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 362 363 #ifdef CONFIG_PHYS_64BIT 364 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 365 #else 366 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 367 #endif 368 369 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 370 CSPR_PORT_SIZE_16 | \ 371 CSPR_MSEL_NOR | \ 372 CSPR_V) 373 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024) 374 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7) 375 /* NOR Flash Timing Params */ 376 #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \ 377 FTIM0_NOR_TEADC(0x5) | \ 378 FTIM0_NOR_TEAHC(0x5) 379 #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \ 380 FTIM1_NOR_TRAD_NOR(0x0f) 381 #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \ 382 FTIM2_NOR_TCH(0x4) | \ 383 FTIM2_NOR_TWP(0x1c) 384 #define CONFIG_SYS_NOR_FTIM3 0x0 385 386 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 387 #define CONFIG_SYS_FLASH_QUIET_TEST 388 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 389 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 390 391 #undef CONFIG_SYS_FLASH_CHECKSUM 392 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 393 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 394 395 /* CFI for NOR Flash */ 396 #define CONFIG_FLASH_CFI_DRIVER 397 #define CONFIG_SYS_FLASH_CFI 398 #define CONFIG_SYS_FLASH_EMPTY_INFO 399 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 400 401 /* NAND Flash on IFC */ 402 #define CONFIG_SYS_NAND_BASE 0xff800000 403 #ifdef CONFIG_PHYS_64BIT 404 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 405 #else 406 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 407 #endif 408 409 #define CONFIG_MTD_DEVICE 410 #define CONFIG_MTD_PARTITION 411 #define CONFIG_CMD_MTDPARTS 412 #define MTDIDS_DEFAULT "nand0=ff800000.flash" 413 #define MTDPARTS_DEFAULT \ 414 "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" 415 416 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 417 | CSPR_PORT_SIZE_8 \ 418 | CSPR_MSEL_NAND \ 419 | CSPR_V) 420 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 421 422 #if defined(CONFIG_P1010RDB_PA) 423 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 424 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 425 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 426 | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ 427 | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ 428 | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ 429 | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ 430 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 431 432 #elif defined(CONFIG_P1010RDB_PB) 433 #define CONFIG_SYS_NAND_ONFI_DETECTION 434 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 435 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 436 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 437 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 438 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 439 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 440 | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ 441 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 442 #endif 443 444 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 445 #define CONFIG_SYS_MAX_NAND_DEVICE 1 446 #define CONFIG_CMD_NAND 447 448 #if defined(CONFIG_P1010RDB_PA) 449 /* NAND Flash Timing Params */ 450 #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ 451 FTIM0_NAND_TWP(0x0C) | \ 452 FTIM0_NAND_TWCHT(0x04) | \ 453 FTIM0_NAND_TWH(0x05) 454 #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \ 455 FTIM1_NAND_TWBE(0x1d) | \ 456 FTIM1_NAND_TRR(0x07) | \ 457 FTIM1_NAND_TRP(0x0c) 458 #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \ 459 FTIM2_NAND_TREH(0x05) | \ 460 FTIM2_NAND_TWHRE(0x0f) 461 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 462 463 #elif defined(CONFIG_P1010RDB_PB) 464 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ 465 /* ONFI NAND Flash mode0 Timing Params */ 466 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ 467 FTIM0_NAND_TWP(0x18) | \ 468 FTIM0_NAND_TWCHT(0x07) | \ 469 FTIM0_NAND_TWH(0x0a)) 470 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ 471 FTIM1_NAND_TWBE(0x39) | \ 472 FTIM1_NAND_TRR(0x0e) | \ 473 FTIM1_NAND_TRP(0x18)) 474 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 475 FTIM2_NAND_TREH(0x0a) | \ 476 FTIM2_NAND_TWHRE(0x1e)) 477 #define CONFIG_SYS_NAND_FTIM3 0x0 478 #endif 479 480 #define CONFIG_SYS_NAND_DDR_LAW 11 481 482 /* Set up IFC registers for boot location NOR/NAND */ 483 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 484 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 485 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 486 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 487 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 488 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 489 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 490 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 491 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 492 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 493 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 494 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 495 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 496 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 497 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 498 #else 499 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 500 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 501 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 502 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 503 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 504 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 505 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 506 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 507 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 508 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 509 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 510 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 511 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 512 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 513 #endif 514 515 /* CPLD on IFC */ 516 #define CONFIG_SYS_CPLD_BASE 0xffb00000 517 518 #ifdef CONFIG_PHYS_64BIT 519 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull 520 #else 521 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 522 #endif 523 524 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 525 | CSPR_PORT_SIZE_8 \ 526 | CSPR_MSEL_GPCM \ 527 | CSPR_V) 528 #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) 529 #define CONFIG_SYS_CSOR3 0x0 530 /* CPLD Timing parameters for IFC CS3 */ 531 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 532 FTIM0_GPCM_TEADC(0x0e) | \ 533 FTIM0_GPCM_TEAHC(0x0e)) 534 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 535 FTIM1_GPCM_TRAD(0x1f)) 536 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 537 FTIM2_GPCM_TCH(0x8) | \ 538 FTIM2_GPCM_TWP(0x1f)) 539 #define CONFIG_SYS_CS3_FTIM3 0x0 540 541 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ 542 defined(CONFIG_RAMBOOT_NAND) 543 #define CONFIG_SYS_RAMBOOT 544 #define CONFIG_SYS_EXTRA_ENV_RELOC 545 #else 546 #undef CONFIG_SYS_RAMBOOT 547 #endif 548 549 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 550 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) 551 #define CONFIG_A003399_NOR_WORKAROUND 552 #endif 553 #endif 554 555 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 556 #define CONFIG_BOARD_EARLY_INIT_R 557 558 #define CONFIG_SYS_INIT_RAM_LOCK 559 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 560 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 561 562 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 563 - GENERATED_GBL_DATA_SIZE) 564 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 565 566 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 567 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 568 569 /* 570 * Config the L2 Cache as L2 SRAM 571 */ 572 #if defined(CONFIG_SPL_BUILD) 573 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 574 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 575 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 576 #define CONFIG_SYS_L2_SIZE (256 << 10) 577 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 578 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 579 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 580 #define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10) 581 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 582 #define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) 583 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) 584 #elif defined(CONFIG_NAND) 585 #ifdef CONFIG_TPL_BUILD 586 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 587 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 588 #define CONFIG_SYS_L2_SIZE (256 << 10) 589 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 590 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 591 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 592 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 593 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 594 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 595 #else 596 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 597 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 598 #define CONFIG_SYS_L2_SIZE (256 << 10) 599 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 600 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 601 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 602 #endif 603 #endif 604 #endif 605 606 /* Serial Port */ 607 #define CONFIG_CONS_INDEX 1 608 #undef CONFIG_SERIAL_SOFTWARE_FIFO 609 #define CONFIG_SYS_NS16550 610 #define CONFIG_SYS_NS16550_SERIAL 611 #define CONFIG_SYS_NS16550_REG_SIZE 1 612 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 613 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 614 #define CONFIG_NS16550_MIN_FUNCTIONS 615 #endif 616 617 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 618 619 #define CONFIG_SYS_BAUDRATE_TABLE \ 620 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 621 622 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 623 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 624 625 /* Use the HUSH parser */ 626 #define CONFIG_SYS_HUSH_PARSER 627 628 /* 629 * Pass open firmware flat tree 630 */ 631 #define CONFIG_OF_LIBFDT 632 #define CONFIG_OF_BOARD_SETUP 633 #define CONFIG_OF_STDOUT_VIA_ALIAS 634 635 /* new uImage format support */ 636 #define CONFIG_FIT 637 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 638 639 /* I2C */ 640 #define CONFIG_SYS_I2C 641 #define CONFIG_SYS_I2C_FSL 642 #define CONFIG_SYS_FSL_I2C_SPEED 400000 643 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 644 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 645 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 646 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 647 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 648 #define I2C_PCA9557_ADDR1 0x18 649 #define I2C_PCA9557_ADDR2 0x19 650 #define I2C_PCA9557_BUS_NUM 0 651 652 /* I2C EEPROM */ 653 #if defined(CONFIG_P1010RDB_PB) 654 #define CONFIG_ID_EEPROM 655 #ifdef CONFIG_ID_EEPROM 656 #define CONFIG_SYS_I2C_EEPROM_NXID 657 #endif 658 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 659 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 660 #define CONFIG_SYS_EEPROM_BUS_NUM 0 661 #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ 662 #endif 663 /* enable read and write access to EEPROM */ 664 #define CONFIG_CMD_EEPROM 665 #define CONFIG_SYS_I2C_MULTI_EEPROMS 666 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 667 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 668 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 669 670 /* RTC */ 671 #define CONFIG_RTC_PT7C4338 672 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 673 674 #define CONFIG_CMD_I2C 675 676 /* 677 * SPI interface will not be available in case of NAND boot SPI CS0 will be 678 * used for SLIC 679 */ 680 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) 681 /* eSPI - Enhanced SPI */ 682 #define CONFIG_FSL_ESPI 683 #define CONFIG_SPI_FLASH 684 #define CONFIG_SPI_FLASH_SPANSION 685 #define CONFIG_CMD_SF 686 #define CONFIG_SF_DEFAULT_SPEED 10000000 687 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 688 #endif 689 690 #if defined(CONFIG_TSEC_ENET) 691 #define CONFIG_MII /* MII PHY management */ 692 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 693 #define CONFIG_TSEC1 1 694 #define CONFIG_TSEC1_NAME "eTSEC1" 695 #define CONFIG_TSEC2 1 696 #define CONFIG_TSEC2_NAME "eTSEC2" 697 #define CONFIG_TSEC3 1 698 #define CONFIG_TSEC3_NAME "eTSEC3" 699 700 #define TSEC1_PHY_ADDR 1 701 #define TSEC2_PHY_ADDR 0 702 #define TSEC3_PHY_ADDR 2 703 704 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 705 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 706 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 707 708 #define TSEC1_PHYIDX 0 709 #define TSEC2_PHYIDX 0 710 #define TSEC3_PHYIDX 0 711 712 #define CONFIG_ETHPRIME "eTSEC1" 713 714 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 715 716 /* TBI PHY configuration for SGMII mode */ 717 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 718 TBICR_PHY_RESET \ 719 | TBICR_ANEG_ENABLE \ 720 | TBICR_FULL_DUPLEX \ 721 | TBICR_SPEED1_SET \ 722 ) 723 724 #endif /* CONFIG_TSEC_ENET */ 725 726 727 /* SATA */ 728 #define CONFIG_FSL_SATA 729 #define CONFIG_FSL_SATA_V2 730 #define CONFIG_LIBATA 731 732 #ifdef CONFIG_FSL_SATA 733 #define CONFIG_SYS_SATA_MAX_DEVICE 2 734 #define CONFIG_SATA1 735 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 736 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 737 #define CONFIG_SATA2 738 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 739 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 740 741 #define CONFIG_CMD_SATA 742 #define CONFIG_LBA48 743 #endif /* #ifdef CONFIG_FSL_SATA */ 744 745 #define CONFIG_MMC 746 #ifdef CONFIG_MMC 747 #define CONFIG_CMD_MMC 748 #define CONFIG_DOS_PARTITION 749 #define CONFIG_FSL_ESDHC 750 #define CONFIG_GENERIC_MMC 751 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 752 #endif 753 754 #define CONFIG_HAS_FSL_DR_USB 755 756 #if defined(CONFIG_HAS_FSL_DR_USB) 757 #define CONFIG_USB_EHCI 758 759 #ifdef CONFIG_USB_EHCI 760 #define CONFIG_CMD_USB 761 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 762 #define CONFIG_USB_EHCI_FSL 763 #define CONFIG_USB_STORAGE 764 #endif 765 #endif 766 767 /* 768 * Environment 769 */ 770 #if defined(CONFIG_SDCARD) 771 #define CONFIG_ENV_IS_IN_MMC 772 #define CONFIG_FSL_FIXED_MMC_LOCATION 773 #define CONFIG_SYS_MMC_ENV_DEV 0 774 #define CONFIG_ENV_SIZE 0x2000 775 #elif defined(CONFIG_SPIFLASH) 776 #define CONFIG_ENV_IS_IN_SPI_FLASH 777 #define CONFIG_ENV_SPI_BUS 0 778 #define CONFIG_ENV_SPI_CS 0 779 #define CONFIG_ENV_SPI_MAX_HZ 10000000 780 #define CONFIG_ENV_SPI_MODE 0 781 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 782 #define CONFIG_ENV_SECT_SIZE 0x10000 783 #define CONFIG_ENV_SIZE 0x2000 784 #elif defined(CONFIG_NAND) 785 #define CONFIG_ENV_IS_IN_NAND 786 #ifdef CONFIG_TPL_BUILD 787 #define CONFIG_ENV_SIZE 0x2000 788 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 789 #else 790 #if defined(CONFIG_P1010RDB_PA) 791 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 792 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ 793 #elif defined(CONFIG_P1010RDB_PB) 794 #define CONFIG_ENV_SIZE (16 * 1024) 795 #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ 796 #endif 797 #endif 798 #define CONFIG_ENV_OFFSET (1024 * 1024) 799 #elif defined(CONFIG_SYS_RAMBOOT) 800 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 801 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 802 #define CONFIG_ENV_SIZE 0x2000 803 #else 804 #define CONFIG_ENV_IS_IN_FLASH 805 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 806 #define CONFIG_ENV_SIZE 0x2000 807 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 808 #endif 809 810 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 811 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 812 813 /* 814 * Command line configuration. 815 */ 816 #include <config_cmd_default.h> 817 818 #define CONFIG_CMD_DATE 819 #define CONFIG_CMD_ERRATA 820 #define CONFIG_CMD_ELF 821 #define CONFIG_CMD_IRQ 822 #define CONFIG_CMD_MII 823 #define CONFIG_CMD_PING 824 #define CONFIG_CMD_REGINFO 825 826 #undef CONFIG_WATCHDOG /* watchdog disabled */ 827 828 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 829 || defined(CONFIG_FSL_SATA) 830 #define CONFIG_CMD_EXT2 831 #define CONFIG_CMD_FAT 832 #define CONFIG_DOS_PARTITION 833 #endif 834 835 /* Hash command with SHA acceleration supported in hardware */ 836 #ifdef CONFIG_FSL_CAAM 837 #define CONFIG_CMD_HASH 838 #define CONFIG_SHA_HW_ACCEL 839 #endif 840 841 /* 842 * Miscellaneous configurable options 843 */ 844 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 845 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 846 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 847 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 848 849 #if defined(CONFIG_CMD_KGDB) 850 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 851 #else 852 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 853 #endif 854 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 855 /* Print Buffer Size */ 856 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 857 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 858 859 /* 860 * Internal Definitions 861 * 862 * Boot Flags 863 */ 864 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 865 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 866 867 /* 868 * For booting Linux, the board info and command line data 869 * have to be in the first 64 MB of memory, since this is 870 * the maximum mapped by the Linux kernel during initialization. 871 */ 872 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 873 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 874 875 #if defined(CONFIG_CMD_KGDB) 876 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 877 #endif 878 879 /* 880 * Environment Configuration 881 */ 882 883 #if defined(CONFIG_TSEC_ENET) 884 #define CONFIG_HAS_ETH0 885 #define CONFIG_HAS_ETH1 886 #define CONFIG_HAS_ETH2 887 #endif 888 889 #define CONFIG_ROOTPATH "/opt/nfsroot" 890 #define CONFIG_BOOTFILE "uImage" 891 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 892 893 /* default location for tftp and bootm */ 894 #define CONFIG_LOADADDR 1000000 895 896 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 897 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 898 899 #define CONFIG_BAUDRATE 115200 900 901 #define CONFIG_EXTRA_ENV_SETTINGS \ 902 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 903 "netdev=eth0\0" \ 904 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 905 "loadaddr=1000000\0" \ 906 "consoledev=ttyS0\0" \ 907 "ramdiskaddr=2000000\0" \ 908 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 909 "fdtaddr=c00000\0" \ 910 "fdtfile=p1010rdb.dtb\0" \ 911 "bdev=sda1\0" \ 912 "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \ 913 "othbootargs=ramdisk_size=600000\0" \ 914 "usbfatboot=setenv bootargs root=/dev/ram rw " \ 915 "console=$consoledev,$baudrate $othbootargs; " \ 916 "usb start;" \ 917 "fatload usb 0:2 $loadaddr $bootfile;" \ 918 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 919 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 920 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 921 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 922 "console=$consoledev,$baudrate $othbootargs; " \ 923 "usb start;" \ 924 "ext2load usb 0:4 $loadaddr $bootfile;" \ 925 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 926 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 927 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 928 CONFIG_BOOTMODE 929 930 #if defined(CONFIG_P1010RDB_PA) 931 #define CONFIG_BOOTMODE \ 932 "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 933 "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ 934 "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 935 "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ 936 "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ 937 "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" 938 939 #elif defined(CONFIG_P1010RDB_PB) 940 #define CONFIG_BOOTMODE \ 941 "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 942 "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ 943 "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 944 "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ 945 "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ 946 "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ 947 "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ 948 "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ 949 "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ 950 "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" 951 #endif 952 953 #define CONFIG_RAMBOOTCOMMAND \ 954 "setenv bootargs root=/dev/ram rw " \ 955 "console=$consoledev,$baudrate $othbootargs; " \ 956 "tftp $ramdiskaddr $ramdiskfile;" \ 957 "tftp $loadaddr $bootfile;" \ 958 "tftp $fdtaddr $fdtfile;" \ 959 "bootm $loadaddr $ramdiskaddr $fdtaddr" 960 961 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 962 963 #include <asm/fsl_secure_boot.h> 964 965 #ifdef CONFIG_SECURE_BOOT 966 #define CONFIG_CMD_BLOB 967 #endif 968 969 #endif /* __CONFIG_H */ 970