1 /* 2 * Copyright 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * P010 RDB board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_36BIT 15 #define CONFIG_PHYS_64BIT 16 #endif 17 #define CONFIG_DISPLAY_BOARDINFO 18 19 #define CONFIG_P1010 20 #define CONFIG_E500 /* BOOKE e500 family */ 21 #include <asm/config_mpc85xx.h> 22 #define CONFIG_NAND_FSL_IFC 23 24 #ifdef CONFIG_SDCARD 25 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 26 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 27 #define CONFIG_SPL_ENV_SUPPORT 28 #define CONFIG_SPL_SERIAL_SUPPORT 29 #define CONFIG_SPL_MMC_SUPPORT 30 #define CONFIG_SPL_MMC_MINIMAL 31 #define CONFIG_SPL_FLUSH_IMAGE 32 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 33 #define CONFIG_SPL_LIBGENERIC_SUPPORT 34 #define CONFIG_SPL_LIBCOMMON_SUPPORT 35 #define CONFIG_SPL_I2C_SUPPORT 36 #define CONFIG_FSL_LAW /* Use common FSL init code */ 37 #define CONFIG_SYS_TEXT_BASE 0x11001000 38 #define CONFIG_SPL_TEXT_BASE 0xD0001000 39 #define CONFIG_SPL_PAD_TO 0x18000 40 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 41 #define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) 42 #define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) 43 #define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) 44 #define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) 45 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 46 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 47 #define CONFIG_SPL_MMC_BOOT 48 #ifdef CONFIG_SPL_BUILD 49 #define CONFIG_SPL_COMMON_INIT_DDR 50 #endif 51 #endif 52 53 #ifdef CONFIG_SPIFLASH 54 #ifdef CONFIG_SECURE_BOOT 55 #define CONFIG_RAMBOOT_SPIFLASH 56 #define CONFIG_SYS_TEXT_BASE 0x11000000 57 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 58 #else 59 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 60 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 61 #define CONFIG_SPL_ENV_SUPPORT 62 #define CONFIG_SPL_SERIAL_SUPPORT 63 #define CONFIG_SPL_SPI_SUPPORT 64 #define CONFIG_SPL_SPI_FLASH_SUPPORT 65 #define CONFIG_SPL_SPI_FLASH_MINIMAL 66 #define CONFIG_SPL_FLUSH_IMAGE 67 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 68 #define CONFIG_SPL_LIBGENERIC_SUPPORT 69 #define CONFIG_SPL_LIBCOMMON_SUPPORT 70 #define CONFIG_SPL_I2C_SUPPORT 71 #define CONFIG_FSL_LAW /* Use common FSL init code */ 72 #define CONFIG_SYS_TEXT_BASE 0x11001000 73 #define CONFIG_SPL_TEXT_BASE 0xD0001000 74 #define CONFIG_SPL_PAD_TO 0x18000 75 #define CONFIG_SPL_MAX_SIZE (96 * 1024) 76 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) 77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) 78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) 79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) 80 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 81 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 82 #define CONFIG_SPL_SPI_BOOT 83 #ifdef CONFIG_SPL_BUILD 84 #define CONFIG_SPL_COMMON_INIT_DDR 85 #endif 86 #endif 87 #endif 88 89 #ifdef CONFIG_NAND 90 #ifdef CONFIG_SECURE_BOOT 91 #define CONFIG_SPL_INIT_MINIMAL 92 #define CONFIG_SPL_SERIAL_SUPPORT 93 #define CONFIG_SPL_NAND_SUPPORT 94 #define CONFIG_SPL_NAND_BOOT 95 #define CONFIG_SPL_FLUSH_IMAGE 96 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 97 98 #define CONFIG_SYS_TEXT_BASE 0x00201000 99 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 100 #define CONFIG_SPL_MAX_SIZE 8192 101 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 102 #define CONFIG_SPL_RELOC_STACK 0x00100000 103 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 104 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 105 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 106 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 107 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 108 #else 109 #ifdef CONFIG_TPL_BUILD 110 #define CONFIG_SPL_NAND_BOOT 111 #define CONFIG_SPL_FLUSH_IMAGE 112 #define CONFIG_SPL_ENV_SUPPORT 113 #define CONFIG_SPL_NAND_INIT 114 #define CONFIG_SPL_SERIAL_SUPPORT 115 #define CONFIG_SPL_LIBGENERIC_SUPPORT 116 #define CONFIG_SPL_LIBCOMMON_SUPPORT 117 #define CONFIG_SPL_I2C_SUPPORT 118 #define CONFIG_SPL_NAND_SUPPORT 119 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 120 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 121 #define CONFIG_SPL_COMMON_INIT_DDR 122 #define CONFIG_SPL_MAX_SIZE (128 << 10) 123 #define CONFIG_SPL_TEXT_BASE 0xD0001000 124 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 125 #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) 126 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 127 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 128 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 129 #elif defined(CONFIG_SPL_BUILD) 130 #define CONFIG_SPL_INIT_MINIMAL 131 #define CONFIG_SPL_SERIAL_SUPPORT 132 #define CONFIG_SPL_NAND_SUPPORT 133 #define CONFIG_SPL_NAND_MINIMAL 134 #define CONFIG_SPL_FLUSH_IMAGE 135 #define CONFIG_SPL_TEXT_BASE 0xff800000 136 #define CONFIG_SPL_MAX_SIZE 8192 137 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 138 #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 139 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 140 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 141 #endif 142 #define CONFIG_SPL_PAD_TO 0x20000 143 #define CONFIG_TPL_PAD_TO 0x20000 144 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 145 #define CONFIG_SYS_TEXT_BASE 0x11001000 146 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 147 #endif 148 #endif 149 150 #ifdef CONFIG_NAND_SECBOOT /* NAND Boot */ 151 #define CONFIG_RAMBOOT_NAND 152 #define CONFIG_SYS_TEXT_BASE 0x11000000 153 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 154 #endif 155 156 #ifndef CONFIG_SYS_TEXT_BASE 157 #define CONFIG_SYS_TEXT_BASE 0xeff40000 158 #endif 159 160 #ifndef CONFIG_RESET_VECTOR_ADDRESS 161 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 162 #endif 163 164 #ifdef CONFIG_SPL_BUILD 165 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 166 #else 167 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 168 #endif 169 170 /* High Level Configuration Options */ 171 #define CONFIG_BOOKE /* BOOKE */ 172 #define CONFIG_E500 /* BOOKE e500 family */ 173 #define CONFIG_FSL_IFC /* Enable IFC Support */ 174 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 175 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 176 177 #define CONFIG_PCI /* Enable PCI/PCIE */ 178 #if defined(CONFIG_PCI) 179 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 180 #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ 181 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 182 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 183 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 184 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 185 186 #define CONFIG_CMD_PCI 187 188 /* 189 * PCI Windows 190 * Memory space is mapped 1-1, but I/O space must start from 0. 191 */ 192 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 193 #define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot" 194 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 195 #ifdef CONFIG_PHYS_64BIT 196 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 197 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 198 #else 199 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 200 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 201 #endif 202 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 203 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 204 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 205 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 206 #ifdef CONFIG_PHYS_64BIT 207 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 208 #else 209 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 210 #endif 211 212 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 213 #if defined(CONFIG_P1010RDB_PA) 214 #define CONFIG_SYS_PCIE2_NAME "PCIe Slot" 215 #elif defined(CONFIG_P1010RDB_PB) 216 #define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot" 217 #endif 218 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 219 #ifdef CONFIG_PHYS_64BIT 220 #define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 221 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 222 #else 223 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 224 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 225 #endif 226 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 227 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 228 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 229 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 230 #ifdef CONFIG_PHYS_64BIT 231 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 232 #else 233 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 234 #endif 235 236 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 237 238 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 239 #define CONFIG_DOS_PARTITION 240 #endif 241 242 #define CONFIG_FSL_LAW /* Use common FSL init code */ 243 #define CONFIG_TSEC_ENET 244 #define CONFIG_ENV_OVERWRITE 245 246 #define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */ 247 #define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ 248 249 #define CONFIG_MISC_INIT_R 250 #define CONFIG_HWCONFIG 251 /* 252 * These can be toggled for performance analysis, otherwise use default. 253 */ 254 #define CONFIG_L2_CACHE /* toggle L2 cache */ 255 #define CONFIG_BTB /* toggle branch predition */ 256 257 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 258 259 #define CONFIG_ENABLE_36BIT_PHYS 260 261 #ifdef CONFIG_PHYS_64BIT 262 #define CONFIG_ADDR_MAP 1 263 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 264 #endif 265 266 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 267 #define CONFIG_SYS_MEMTEST_END 0x1fffffff 268 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 269 270 /* DDR Setup */ 271 #define CONFIG_SYS_FSL_DDR3 272 #define CONFIG_SYS_DDR_RAW_TIMING 273 #define CONFIG_DDR_SPD 274 #define CONFIG_SYS_SPD_BUS_NUM 1 275 #define SPD_EEPROM_ADDRESS 0x52 276 277 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 278 279 #ifndef __ASSEMBLY__ 280 extern unsigned long get_sdram_size(void); 281 #endif 282 #define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ 283 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 284 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 285 286 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 287 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 288 289 /* DDR3 Controller Settings */ 290 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f 291 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 292 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 293 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 294 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 295 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 296 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 297 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 298 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 299 #define CONFIG_SYS_DDR_RCW_1 0x00000000 300 #define CONFIG_SYS_DDR_RCW_2 0x00000000 301 #define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */ 302 #define CONFIG_SYS_DDR_CONTROL_2 0x24401000 303 #define CONFIG_SYS_DDR_TIMING_4 0x00000001 304 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 305 306 #define CONFIG_SYS_DDR_TIMING_3_800 0x00030000 307 #define CONFIG_SYS_DDR_TIMING_0_800 0x00110104 308 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644 309 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF 310 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 311 #define CONFIG_SYS_DDR_MODE_1_800 0x00441420 312 #define CONFIG_SYS_DDR_MODE_2_800 0x00000000 313 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100 314 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608 315 316 /* settings for DDR3 at 667MT/s */ 317 #define CONFIG_SYS_DDR_TIMING_3_667 0x00010000 318 #define CONFIG_SYS_DDR_TIMING_0_667 0x00110004 319 #define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544 320 #define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD 321 #define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000 322 #define CONFIG_SYS_DDR_MODE_1_667 0x00441210 323 #define CONFIG_SYS_DDR_MODE_2_667 0x00000000 324 #define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000 325 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608 326 327 #define CONFIG_SYS_CCSRBAR 0xffe00000 328 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 329 330 /* Don't relocate CCSRBAR while in NAND_SPL */ 331 #ifdef CONFIG_SPL_BUILD 332 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 333 #endif 334 335 /* 336 * Memory map 337 * 338 * 0x0000_0000 0x3fff_ffff DDR 1G cacheable 339 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable 340 * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable 341 * 342 * Localbus non-cacheable 343 * 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable 344 * 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable 345 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 346 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 347 */ 348 349 /* 350 * IFC Definitions 351 */ 352 /* NOR Flash on IFC */ 353 #ifdef CONFIG_SPL_BUILD 354 #define CONFIG_SYS_NO_FLASH 355 #endif 356 357 #define CONFIG_SYS_FLASH_BASE 0xee000000 358 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */ 359 360 #ifdef CONFIG_PHYS_64BIT 361 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 362 #else 363 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 364 #endif 365 366 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 367 CSPR_PORT_SIZE_16 | \ 368 CSPR_MSEL_NOR | \ 369 CSPR_V) 370 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024) 371 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7) 372 /* NOR Flash Timing Params */ 373 #define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \ 374 FTIM0_NOR_TEADC(0x5) | \ 375 FTIM0_NOR_TEAHC(0x5) 376 #define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \ 377 FTIM1_NOR_TRAD_NOR(0x0f) 378 #define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \ 379 FTIM2_NOR_TCH(0x4) | \ 380 FTIM2_NOR_TWP(0x1c) 381 #define CONFIG_SYS_NOR_FTIM3 0x0 382 383 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 384 #define CONFIG_SYS_FLASH_QUIET_TEST 385 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 386 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 387 388 #undef CONFIG_SYS_FLASH_CHECKSUM 389 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 390 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 391 392 /* CFI for NOR Flash */ 393 #define CONFIG_FLASH_CFI_DRIVER 394 #define CONFIG_SYS_FLASH_CFI 395 #define CONFIG_SYS_FLASH_EMPTY_INFO 396 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 397 398 /* NAND Flash on IFC */ 399 #define CONFIG_SYS_NAND_BASE 0xff800000 400 #ifdef CONFIG_PHYS_64BIT 401 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 402 #else 403 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 404 #endif 405 406 #define CONFIG_MTD_DEVICE 407 #define CONFIG_MTD_PARTITION 408 #define CONFIG_CMD_MTDPARTS 409 #define MTDIDS_DEFAULT "nand0=ff800000.flash" 410 #define MTDPARTS_DEFAULT \ 411 "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" 412 413 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 414 | CSPR_PORT_SIZE_8 \ 415 | CSPR_MSEL_NAND \ 416 | CSPR_V) 417 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 418 419 #if defined(CONFIG_P1010RDB_PA) 420 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 421 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 422 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 423 | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ 424 | CSOR_NAND_PGS_512 /* Page Size = 512b */ \ 425 | CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \ 426 | CSOR_NAND_PB(32)) /* 32 Pages Per Block */ 427 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) 428 429 #elif defined(CONFIG_P1010RDB_PB) 430 #define CONFIG_SYS_NAND_ONFI_DETECTION 431 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 432 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 433 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 434 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 435 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 436 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 437 | CSOR_NAND_PB(128)) /*Pages Per Block = 128 */ 438 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 439 #endif 440 441 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 442 #define CONFIG_SYS_MAX_NAND_DEVICE 1 443 #define CONFIG_CMD_NAND 444 445 #if defined(CONFIG_P1010RDB_PA) 446 /* NAND Flash Timing Params */ 447 #define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \ 448 FTIM0_NAND_TWP(0x0C) | \ 449 FTIM0_NAND_TWCHT(0x04) | \ 450 FTIM0_NAND_TWH(0x05) 451 #define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \ 452 FTIM1_NAND_TWBE(0x1d) | \ 453 FTIM1_NAND_TRR(0x07) | \ 454 FTIM1_NAND_TRP(0x0c) 455 #define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \ 456 FTIM2_NAND_TREH(0x05) | \ 457 FTIM2_NAND_TWHRE(0x0f) 458 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 459 460 #elif defined(CONFIG_P1010RDB_PB) 461 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */ 462 /* ONFI NAND Flash mode0 Timing Params */ 463 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \ 464 FTIM0_NAND_TWP(0x18) | \ 465 FTIM0_NAND_TWCHT(0x07) | \ 466 FTIM0_NAND_TWH(0x0a)) 467 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \ 468 FTIM1_NAND_TWBE(0x39) | \ 469 FTIM1_NAND_TRR(0x0e) | \ 470 FTIM1_NAND_TRP(0x18)) 471 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 472 FTIM2_NAND_TREH(0x0a) | \ 473 FTIM2_NAND_TWHRE(0x1e)) 474 #define CONFIG_SYS_NAND_FTIM3 0x0 475 #endif 476 477 #define CONFIG_SYS_NAND_DDR_LAW 11 478 479 /* Set up IFC registers for boot location NOR/NAND */ 480 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 481 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 482 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 483 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 484 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 485 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 486 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 487 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 488 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 489 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 490 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 491 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 492 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 493 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 494 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 495 #else 496 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 497 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 498 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 499 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 500 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 501 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 502 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 503 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 504 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 505 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 506 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 507 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 508 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 509 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 510 #endif 511 512 /* CPLD on IFC */ 513 #define CONFIG_SYS_CPLD_BASE 0xffb00000 514 515 #ifdef CONFIG_PHYS_64BIT 516 #define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull 517 #else 518 #define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE 519 #endif 520 521 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 522 | CSPR_PORT_SIZE_8 \ 523 | CSPR_MSEL_GPCM \ 524 | CSPR_V) 525 #define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) 526 #define CONFIG_SYS_CSOR3 0x0 527 /* CPLD Timing parameters for IFC CS3 */ 528 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 529 FTIM0_GPCM_TEADC(0x0e) | \ 530 FTIM0_GPCM_TEAHC(0x0e)) 531 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 532 FTIM1_GPCM_TRAD(0x1f)) 533 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 534 FTIM2_GPCM_TCH(0x8) | \ 535 FTIM2_GPCM_TWP(0x1f)) 536 #define CONFIG_SYS_CS3_FTIM3 0x0 537 538 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \ 539 defined(CONFIG_RAMBOOT_NAND) 540 #define CONFIG_SYS_RAMBOOT 541 #define CONFIG_SYS_EXTRA_ENV_RELOC 542 #else 543 #undef CONFIG_SYS_RAMBOOT 544 #endif 545 546 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399 547 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) 548 #define CONFIG_A003399_NOR_WORKAROUND 549 #endif 550 #endif 551 552 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 553 #define CONFIG_BOARD_EARLY_INIT_R 554 555 #define CONFIG_SYS_INIT_RAM_LOCK 556 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 557 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ 558 559 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ 560 - GENERATED_GBL_DATA_SIZE) 561 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 562 563 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 564 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 565 566 /* 567 * Config the L2 Cache as L2 SRAM 568 */ 569 #if defined(CONFIG_SPL_BUILD) 570 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 571 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 572 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 573 #define CONFIG_SYS_L2_SIZE (256 << 10) 574 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 575 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 576 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 577 #define CONFIG_SPL_RELOC_STACK_SIZE (16 << 10) 578 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 579 #define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10) 580 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024) 581 #elif defined(CONFIG_NAND) 582 #ifdef CONFIG_TPL_BUILD 583 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 584 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 585 #define CONFIG_SYS_L2_SIZE (256 << 10) 586 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 587 #define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000 588 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 589 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 590 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 591 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 592 #else 593 #define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 594 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 595 #define CONFIG_SYS_L2_SIZE (256 << 10) 596 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 597 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 598 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 599 #endif 600 #endif 601 #endif 602 603 /* Serial Port */ 604 #define CONFIG_CONS_INDEX 1 605 #undef CONFIG_SERIAL_SOFTWARE_FIFO 606 #define CONFIG_SYS_NS16550_SERIAL 607 #define CONFIG_SYS_NS16550_REG_SIZE 1 608 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 609 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 610 #define CONFIG_NS16550_MIN_FUNCTIONS 611 #endif 612 613 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 614 615 #define CONFIG_SYS_BAUDRATE_TABLE \ 616 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 617 618 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 619 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 620 621 /* I2C */ 622 #define CONFIG_SYS_I2C 623 #define CONFIG_SYS_I2C_FSL 624 #define CONFIG_SYS_FSL_I2C_SPEED 400000 625 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 626 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 627 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 628 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 629 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 630 #define I2C_PCA9557_ADDR1 0x18 631 #define I2C_PCA9557_ADDR2 0x19 632 #define I2C_PCA9557_BUS_NUM 0 633 634 /* I2C EEPROM */ 635 #if defined(CONFIG_P1010RDB_PB) 636 #define CONFIG_ID_EEPROM 637 #ifdef CONFIG_ID_EEPROM 638 #define CONFIG_SYS_I2C_EEPROM_NXID 639 #endif 640 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 641 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 642 #define CONFIG_SYS_EEPROM_BUS_NUM 0 643 #define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */ 644 #endif 645 /* enable read and write access to EEPROM */ 646 #define CONFIG_CMD_EEPROM 647 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 648 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 649 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 650 651 /* RTC */ 652 #define CONFIG_RTC_PT7C4338 653 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 654 655 /* 656 * SPI interface will not be available in case of NAND boot SPI CS0 will be 657 * used for SLIC 658 */ 659 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT) 660 /* eSPI - Enhanced SPI */ 661 #define CONFIG_SF_DEFAULT_SPEED 10000000 662 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 663 #endif 664 665 #if defined(CONFIG_TSEC_ENET) 666 #define CONFIG_MII /* MII PHY management */ 667 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 668 #define CONFIG_TSEC1 1 669 #define CONFIG_TSEC1_NAME "eTSEC1" 670 #define CONFIG_TSEC2 1 671 #define CONFIG_TSEC2_NAME "eTSEC2" 672 #define CONFIG_TSEC3 1 673 #define CONFIG_TSEC3_NAME "eTSEC3" 674 675 #define TSEC1_PHY_ADDR 1 676 #define TSEC2_PHY_ADDR 0 677 #define TSEC3_PHY_ADDR 2 678 679 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 680 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 681 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 682 683 #define TSEC1_PHYIDX 0 684 #define TSEC2_PHYIDX 0 685 #define TSEC3_PHYIDX 0 686 687 #define CONFIG_ETHPRIME "eTSEC1" 688 689 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 690 691 /* TBI PHY configuration for SGMII mode */ 692 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 693 TBICR_PHY_RESET \ 694 | TBICR_ANEG_ENABLE \ 695 | TBICR_FULL_DUPLEX \ 696 | TBICR_SPEED1_SET \ 697 ) 698 699 #endif /* CONFIG_TSEC_ENET */ 700 701 /* SATA */ 702 #define CONFIG_FSL_SATA 703 #define CONFIG_FSL_SATA_V2 704 #define CONFIG_LIBATA 705 706 #ifdef CONFIG_FSL_SATA 707 #define CONFIG_SYS_SATA_MAX_DEVICE 2 708 #define CONFIG_SATA1 709 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 710 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 711 #define CONFIG_SATA2 712 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 713 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 714 715 #define CONFIG_CMD_SATA 716 #define CONFIG_LBA48 717 #endif /* #ifdef CONFIG_FSL_SATA */ 718 719 #define CONFIG_MMC 720 #ifdef CONFIG_MMC 721 #define CONFIG_DOS_PARTITION 722 #define CONFIG_FSL_ESDHC 723 #define CONFIG_GENERIC_MMC 724 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 725 #endif 726 727 #define CONFIG_HAS_FSL_DR_USB 728 729 #if defined(CONFIG_HAS_FSL_DR_USB) 730 #define CONFIG_USB_EHCI 731 732 #ifdef CONFIG_USB_EHCI 733 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 734 #define CONFIG_USB_EHCI_FSL 735 #define CONFIG_USB_STORAGE 736 #endif 737 #endif 738 739 /* 740 * Environment 741 */ 742 #if defined(CONFIG_SDCARD) 743 #define CONFIG_ENV_IS_IN_MMC 744 #define CONFIG_FSL_FIXED_MMC_LOCATION 745 #define CONFIG_SYS_MMC_ENV_DEV 0 746 #define CONFIG_ENV_SIZE 0x2000 747 #elif defined(CONFIG_SPIFLASH) 748 #define CONFIG_ENV_IS_IN_SPI_FLASH 749 #define CONFIG_ENV_SPI_BUS 0 750 #define CONFIG_ENV_SPI_CS 0 751 #define CONFIG_ENV_SPI_MAX_HZ 10000000 752 #define CONFIG_ENV_SPI_MODE 0 753 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 754 #define CONFIG_ENV_SECT_SIZE 0x10000 755 #define CONFIG_ENV_SIZE 0x2000 756 #elif defined(CONFIG_NAND) 757 #define CONFIG_ENV_IS_IN_NAND 758 #ifdef CONFIG_TPL_BUILD 759 #define CONFIG_ENV_SIZE 0x2000 760 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 761 #else 762 #if defined(CONFIG_P1010RDB_PA) 763 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 764 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */ 765 #elif defined(CONFIG_P1010RDB_PB) 766 #define CONFIG_ENV_SIZE (16 * 1024) 767 #define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */ 768 #endif 769 #endif 770 #define CONFIG_ENV_OFFSET (1024 * 1024) 771 #elif defined(CONFIG_SYS_RAMBOOT) 772 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 773 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 774 #define CONFIG_ENV_SIZE 0x2000 775 #else 776 #define CONFIG_ENV_IS_IN_FLASH 777 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 778 #define CONFIG_ENV_SIZE 0x2000 779 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 780 #endif 781 782 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 783 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 784 785 /* 786 * Command line configuration. 787 */ 788 #define CONFIG_CMD_DATE 789 #define CONFIG_CMD_ERRATA 790 #define CONFIG_CMD_IRQ 791 #define CONFIG_CMD_REGINFO 792 793 #undef CONFIG_WATCHDOG /* watchdog disabled */ 794 795 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ 796 || defined(CONFIG_FSL_SATA) 797 #define CONFIG_DOS_PARTITION 798 #endif 799 800 /* Hash command with SHA acceleration supported in hardware */ 801 #ifdef CONFIG_FSL_CAAM 802 #define CONFIG_CMD_HASH 803 #define CONFIG_SHA_HW_ACCEL 804 #endif 805 806 /* 807 * Miscellaneous configurable options 808 */ 809 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 810 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 811 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 812 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 813 814 #if defined(CONFIG_CMD_KGDB) 815 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 816 #else 817 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 818 #endif 819 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 820 /* Print Buffer Size */ 821 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 822 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 823 824 /* 825 * For booting Linux, the board info and command line data 826 * have to be in the first 64 MB of memory, since this is 827 * the maximum mapped by the Linux kernel during initialization. 828 */ 829 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 830 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 831 832 #if defined(CONFIG_CMD_KGDB) 833 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 834 #endif 835 836 /* 837 * Environment Configuration 838 */ 839 840 #if defined(CONFIG_TSEC_ENET) 841 #define CONFIG_HAS_ETH0 842 #define CONFIG_HAS_ETH1 843 #define CONFIG_HAS_ETH2 844 #endif 845 846 #define CONFIG_ROOTPATH "/opt/nfsroot" 847 #define CONFIG_BOOTFILE "uImage" 848 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 849 850 /* default location for tftp and bootm */ 851 #define CONFIG_LOADADDR 1000000 852 853 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 854 855 #define CONFIG_BAUDRATE 115200 856 857 #define CONFIG_EXTRA_ENV_SETTINGS \ 858 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 859 "netdev=eth0\0" \ 860 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 861 "loadaddr=1000000\0" \ 862 "consoledev=ttyS0\0" \ 863 "ramdiskaddr=2000000\0" \ 864 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 865 "fdtaddr=c00000\0" \ 866 "fdtfile=p1010rdb.dtb\0" \ 867 "bdev=sda1\0" \ 868 "hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \ 869 "othbootargs=ramdisk_size=600000\0" \ 870 "usbfatboot=setenv bootargs root=/dev/ram rw " \ 871 "console=$consoledev,$baudrate $othbootargs; " \ 872 "usb start;" \ 873 "fatload usb 0:2 $loadaddr $bootfile;" \ 874 "fatload usb 0:2 $fdtaddr $fdtfile;" \ 875 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ 876 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 877 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 878 "console=$consoledev,$baudrate $othbootargs; " \ 879 "usb start;" \ 880 "ext2load usb 0:4 $loadaddr $bootfile;" \ 881 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 882 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 883 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 884 CONFIG_BOOTMODE 885 886 #if defined(CONFIG_P1010RDB_PA) 887 #define CONFIG_BOOTMODE \ 888 "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 889 "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \ 890 "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \ 891 "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \ 892 "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \ 893 "mw.b ffb00011 0; mw.b ffb00017 1; reset\0" 894 895 #elif defined(CONFIG_P1010RDB_PB) 896 #define CONFIG_BOOTMODE \ 897 "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 898 "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \ 899 "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \ 900 "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \ 901 "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \ 902 "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \ 903 "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \ 904 "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \ 905 "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \ 906 "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" 907 #endif 908 909 #define CONFIG_RAMBOOTCOMMAND \ 910 "setenv bootargs root=/dev/ram rw " \ 911 "console=$consoledev,$baudrate $othbootargs; " \ 912 "tftp $ramdiskaddr $ramdiskfile;" \ 913 "tftp $loadaddr $bootfile;" \ 914 "tftp $fdtaddr $fdtfile;" \ 915 "bootm $loadaddr $ramdiskaddr $fdtaddr" 916 917 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 918 919 #include <asm/fsl_secure_boot.h> 920 921 #endif /* __CONFIG_H */ 922