xref: /openbmc/u-boot/include/configs/MigoR.h (revision 2399e401)
1 /*
2  * Configuation settings for the Renesas Solutions Migo-R board
3  *
4  * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __MIGO_R_H
10 #define __MIGO_R_H
11 
12 #define CONFIG_CPU_SH7722	1
13 #define CONFIG_MIGO_R		1
14 
15 #define CONFIG_CMD_SDRAM
16 
17 #define CONFIG_BOOTARGS		"console=ttySC0,115200 root=1f01"
18 
19 #define CONFIG_DISPLAY_BOARDINFO
20 #undef  CONFIG_SHOW_BOOT_PROGRESS
21 
22 /* SMC9111 */
23 #define CONFIG_SMC91111
24 #define CONFIG_SMC91111_BASE    (0xB0000000)
25 
26 /* MEMORY */
27 #define MIGO_R_SDRAM_BASE	(0x8C000000)
28 #define MIGO_R_FLASH_BASE_1	(0xA0000000)
29 #define MIGO_R_FLASH_BANK_SIZE	(64 * 1024 * 1024)
30 
31 #define CONFIG_SYS_TEXT_BASE	0x8FFC0000
32 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
33 #define CONFIG_SYS_CBSIZE		256		/* Buffer size for input from the Console */
34 #define CONFIG_SYS_PBSIZE		256		/* Buffer size for Console output */
35 #define CONFIG_SYS_MAXARGS		16		/* max args accepted for monitor commands */
36 #define CONFIG_SYS_BARGSIZE	512		/* Buffer size for Boot Arguments passed to kernel */
37 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate settings for this board */
38 
39 /* SCIF */
40 #define CONFIG_SCIF_CONSOLE	1
41 #define CONFIG_CONS_SCIF0	1
42 
43 #define CONFIG_SYS_MEMTEST_START	(MIGO_R_SDRAM_BASE)
44 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
45 
46 /* Enable alternate, more extensive, memory test */
47 #undef  CONFIG_SYS_ALT_MEMTEST
48 /* Scratch address used by the alternate memory test */
49 #undef  CONFIG_SYS_MEMTEST_SCRATCH
50 
51 /* Enable temporary baudrate change while serial download */
52 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
53 
54 #define CONFIG_SYS_SDRAM_BASE	(MIGO_R_SDRAM_BASE)
55 /* maybe more, but if so u-boot doesn't know about it... */
56 #define CONFIG_SYS_SDRAM_SIZE	(64 * 1024 * 1024)
57 /* default load address for scripts ?!? */
58 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
59 
60 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
61 #define CONFIG_SYS_MONITOR_BASE	(MIGO_R_FLASH_BASE_1)
62 /* Monitor size */
63 #define CONFIG_SYS_MONITOR_LEN	(128 * 1024)
64 /* Size of DRAM reserved for malloc() use */
65 #define CONFIG_SYS_MALLOC_LEN	(256 * 1024)
66 #define CONFIG_SYS_BOOTMAPSZ	(8 * 1024 * 1024)
67 
68 /* FLASH */
69 #define CONFIG_SYS_FLASH_CFI
70 #define CONFIG_FLASH_CFI_DRIVER
71 #undef  CONFIG_SYS_FLASH_QUIET_TEST
72 /* print 'E' for empty sector on flinfo */
73 #define CONFIG_SYS_FLASH_EMPTY_INFO
74 /* Physical start address of Flash memory */
75 #define CONFIG_SYS_FLASH_BASE	(MIGO_R_FLASH_BASE_1)
76 /* Max number of sectors on each Flash chip */
77 #define CONFIG_SYS_MAX_FLASH_SECT	512
78 
79 /* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */
80 #define CONFIG_SYS_MAX_FLASH_BANKS	1
81 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) }
82 
83 /* Timeout for Flash erase operations (in ms) */
84 #define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
85 /* Timeout for Flash write operations (in ms) */
86 #define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
87 /* Timeout for Flash set sector lock bit operations (in ms) */
88 #define CONFIG_SYS_FLASH_LOCK_TOUT	(3 * 1000)
89 /* Timeout for Flash clear lock bit operations (in ms) */
90 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
91 
92 /* Use hardware flash sectors protection instead of U-Boot software protection */
93 #undef  CONFIG_SYS_FLASH_PROTECTION
94 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
95 
96 /* ENV setting */
97 #define CONFIG_ENV_IS_IN_FLASH
98 #define CONFIG_ENV_OVERWRITE	1
99 #define CONFIG_ENV_SECT_SIZE	(128 * 1024)
100 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
101 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
102 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
103 #define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
104 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
105 
106 /* Board Clock */
107 #define CONFIG_SYS_CLK_FREQ	33333333
108 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
109 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
110 #define CONFIG_SYS_TMU_CLK_DIV		(4)	/* 4 (default), 16, 64, 256 or 1024 */
111 
112 #endif	/* __MIGO_R_H */
113