1 /* 2 * Copyright 2006 Freescale Semiconductor. 3 * 4 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * MPC8641HPCN board configuration file 27 * 28 * Make sure you change the MAC address and other network params first, 29 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. 30 */ 31 32 #ifndef __CONFIG_H 33 #define __CONFIG_H 34 35 /* High Level Configuration Options */ 36 #define CONFIG_MPC86xx 1 /* MPC86xx */ 37 #define CONFIG_MPC8641 1 /* MPC8641 specific */ 38 #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ 39 #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ 40 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ 41 42 #ifdef RUN_DIAG 43 #define CFG_DIAG_ADDR 0xff800000 44 #endif 45 46 #define CFG_RESET_ADDRESS 0xfff00100 47 48 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 49 #define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ 50 #define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ 51 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 52 #define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ 53 54 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 55 #define CONFIG_ENV_OVERWRITE 56 57 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ 58 #undef CONFIG_DDR_DLL /* possible DLL fix needed */ 59 #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ 60 #define CONFIG_DDR_ECC /* only for ECC DDR module */ 61 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 62 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 63 #define CONFIG_NUM_DDR_CONTROLLERS 2 64 /* #define CONFIG_DDR_INTERLEAVE 1 */ 65 #define CACHE_LINE_INTERLEAVING 0x20000000 66 #define PAGE_INTERLEAVING 0x21000000 67 #define BANK_INTERLEAVING 0x22000000 68 #define SUPER_BANK_INTERLEAVING 0x23000000 69 70 #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ 71 72 #define CONFIG_ALTIVEC 1 73 74 /* 75 * L2CR setup -- make sure this is right for your board! 76 */ 77 #define CFG_L2 78 #define L2_INIT 0 79 #define L2_ENABLE (L2CR_L2E) 80 81 #ifndef CONFIG_SYS_CLK_FREQ 82 #ifndef __ASSEMBLY__ 83 extern unsigned long get_board_sys_clk(unsigned long dummy); 84 #endif 85 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 86 #endif 87 88 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 89 90 #define CFG_MEMTEST_START 0x00200000 /* memtest region */ 91 #define CFG_MEMTEST_END 0x00400000 92 93 /* 94 * Base addresses -- Note these are effective addresses where the 95 * actual resources get mapped (not physical addresses) 96 */ 97 #define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 98 #define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ 99 #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ 100 101 #define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) 102 #define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) 103 104 /* 105 * DDR Setup 106 */ 107 #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 108 #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE 109 #define CONFIG_VERY_BIG_RAM 110 111 #define MPC86xx_DDR_SDRAM_CLK_CNTL 112 113 #if defined(CONFIG_SPD_EEPROM) 114 /* 115 * Determine DDR configuration from I2C interface. 116 */ 117 #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */ 118 #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */ 119 #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */ 120 #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */ 121 122 #else 123 /* 124 * Manually set up DDR1 parameters 125 */ 126 127 #define CFG_SDRAM_SIZE 256 /* DDR is 256MB */ 128 129 #define CFG_DDR_CS0_BNDS 0x0000000F 130 #define CFG_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 131 #define CFG_DDR_EXT_REFRESH 0x00000000 132 #define CFG_DDR_TIMING_0 0x00260802 133 #define CFG_DDR_TIMING_1 0x39357322 134 #define CFG_DDR_TIMING_2 0x14904cc8 135 #define CFG_DDR_MODE_1 0x00480432 136 #define CFG_DDR_MODE_2 0x00000000 137 #define CFG_DDR_INTERVAL 0x06090100 138 #define CFG_DDR_DATA_INIT 0xdeadbeef 139 #define CFG_DDR_CLK_CTRL 0x03800000 140 #define CFG_DDR_OCD_CTRL 0x00000000 141 #define CFG_DDR_OCD_STATUS 0x00000000 142 #define CFG_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ 143 #define CFG_DDR_CONTROL2 0x04400000 144 145 /* Not used in fixed_sdram function */ 146 147 #define CFG_DDR_MODE 0x00000022 148 #define CFG_DDR_CS1_BNDS 0x00000000 149 #define CFG_DDR_CS2_BNDS 0x00000FFF /* Not done */ 150 #define CFG_DDR_CS3_BNDS 0x00000FFF /* Not done */ 151 #define CFG_DDR_CS4_BNDS 0x00000FFF /* Not done */ 152 #define CFG_DDR_CS5_BNDS 0x00000FFF /* Not done */ 153 #endif 154 155 #define CONFIG_ID_EEPROM 156 #define CFG_I2C_EEPROM_NXID 157 #define CFG_ID_EEPROM 158 #define CFG_I2C_EEPROM_ADDR 0x57 159 #define CFG_I2C_EEPROM_ADDR_LEN 1 160 161 /* 162 * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. 163 * There is an 8MB flash. In effect, the addresses from fe000000 to fe7fffff 164 * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff. 165 * However, when u-boot comes up, the flash_init needs hard start addresses 166 * to build its info table. For user convenience, the flash addresses is 167 * fe800000 and ff800000. That way, u-boot knows where the flash is 168 * and the user can download u-boot code from promjet to fef00000, a 169 * more intuitive location than fe700000. 170 * 171 * Note that, on switching the boot location, fef00000 becomes fff00000. 172 */ 173 #define CFG_FLASH_BASE 0xfe800000 /* start of FLASH 32M */ 174 #define CFG_FLASH_BASE2 0xff800000 175 176 #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2} 177 178 #define CFG_BR0_PRELIM 0xff001001 /* port size 16bit */ 179 #define CFG_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/ 180 181 #define CFG_BR1_PRELIM 0xfe001001 /* port size 16bit */ 182 #define CFG_OR1_PRELIM 0xff006ff7 /* 16MB Alternate Boot Flash area*/ 183 184 #define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */ 185 #define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 186 187 #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ 188 #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 189 190 191 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 192 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 193 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 194 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 195 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 196 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 197 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ 198 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 199 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 200 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 201 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 202 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 203 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 204 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 205 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 206 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 207 #define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ 208 209 #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ 210 #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ 211 212 #undef CFG_FLASH_CHECKSUM 213 #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 214 #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 215 #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ 216 217 #define CFG_FLASH_CFI_DRIVER 218 #define CFG_FLASH_CFI 219 #define CFG_FLASH_EMPTY_INFO 220 221 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) 222 #define CFG_RAMBOOT 223 #else 224 #undef CFG_RAMBOOT 225 #endif 226 227 #if defined(CFG_RAMBOOT) 228 #undef CONFIG_SPD_EEPROM 229 #define CFG_SDRAM_SIZE 256 230 #endif 231 232 #undef CONFIG_CLOCKS_IN_MHZ 233 234 #define CONFIG_L1_INIT_RAM 235 #define CFG_INIT_RAM_LOCK 1 236 #ifndef CFG_INIT_RAM_LOCK 237 #define CFG_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ 238 #else 239 #define CFG_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ 240 #endif 241 #define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ 242 243 #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ 244 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 245 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 246 247 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 248 #define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 249 250 /* Serial Port */ 251 #define CONFIG_CONS_INDEX 1 252 #undef CONFIG_SERIAL_SOFTWARE_FIFO 253 #define CFG_NS16550 254 #define CFG_NS16550_SERIAL 255 #define CFG_NS16550_REG_SIZE 1 256 #define CFG_NS16550_CLK get_bus_freq(0) 257 258 #define CFG_BAUDRATE_TABLE \ 259 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 260 261 #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) 262 #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) 263 264 /* Use the HUSH parser */ 265 #define CFG_HUSH_PARSER 266 #ifdef CFG_HUSH_PARSER 267 #define CFG_PROMPT_HUSH_PS2 "> " 268 #endif 269 270 /* 271 * Pass open firmware flat tree to kernel 272 */ 273 #define CONFIG_OF_LIBFDT 1 274 #define CONFIG_OF_BOARD_SETUP 1 275 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 276 277 278 #define CFG_64BIT_VSPRINTF 1 279 #define CFG_64BIT_STRTOUL 1 280 281 /* 282 * I2C 283 */ 284 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 285 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 286 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 287 #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ 288 #define CFG_I2C_SLAVE 0x7F 289 #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 290 #define CFG_I2C_OFFSET 0x3100 291 292 /* 293 * RapidIO MMU 294 */ 295 #define CFG_RIO_MEM_BASE 0xc0000000 /* base address */ 296 #define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE 297 #define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */ 298 299 /* 300 * General PCI 301 * Addresses are mapped 1-1. 302 */ 303 #define CFG_PCI1_MEM_BASE 0x80000000 304 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE 305 #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ 306 #define CFG_PCI1_IO_BASE 0x00000000 307 #define CFG_PCI1_IO_PHYS 0xe2000000 308 #define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ 309 310 /* PCI view of System Memory */ 311 #define CFG_PCI_MEMORY_BUS 0x00000000 312 #define CFG_PCI_MEMORY_PHYS 0x00000000 313 #define CFG_PCI_MEMORY_SIZE 0x80000000 314 315 /* For RTL8139 */ 316 #define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) 317 #define _IO_BASE 0x00000000 318 319 #define CFG_PCI2_MEM_BASE 0xa0000000 320 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE 321 #define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ 322 #define CFG_PCI2_IO_BASE 0x00000000 323 #define CFG_PCI2_IO_PHYS 0xe3000000 324 #define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ 325 326 #if defined(CONFIG_PCI) 327 328 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 329 330 #undef CFG_SCSI_SCAN_BUS_REVERSE 331 332 #define CONFIG_NET_MULTI 333 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 334 335 #define CONFIG_RTL8139 336 337 #undef CONFIG_EEPRO100 338 #undef CONFIG_TULIP 339 340 /************************************************************ 341 * USB support 342 ************************************************************/ 343 #define CONFIG_PCI_OHCI 1 344 #define CONFIG_USB_OHCI_NEW 1 345 #define CONFIG_USB_KEYBOARD 1 346 #define CFG_DEVICE_DEREGISTER 347 #define CFG_USB_EVENT_POLL 1 348 #define CFG_USB_OHCI_SLOT_NAME "ohci_pci" 349 #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 350 #define CFG_OHCI_SWAP_REG_ACCESS 1 351 352 #if !defined(CONFIG_PCI_PNP) 353 #define PCI_ENET0_IOADDR 0xe0000000 354 #define PCI_ENET0_MEMADDR 0xe0000000 355 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ 356 #endif 357 358 /*PCIE video card used*/ 359 #define VIDEO_IO_OFFSET CFG_PCI2_IO_PHYS 360 361 /*PCI video card used*/ 362 /*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ 363 364 /* video */ 365 #define CONFIG_VIDEO 366 367 #if defined(CONFIG_VIDEO) 368 #define CONFIG_BIOSEMU 369 #define CONFIG_CFB_CONSOLE 370 #define CONFIG_VIDEO_SW_CURSOR 371 #define CONFIG_VGA_AS_SINGLE_DEVICE 372 #define CONFIG_ATI_RADEON_FB 373 #define CONFIG_VIDEO_LOGO 374 /*#define CONFIG_CONSOLE_CURSOR*/ 375 #define CFG_ISA_IO_BASE_ADDRESS CFG_PCI2_IO_PHYS 376 #endif 377 378 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 379 380 #define CONFIG_DOS_PARTITION 381 #define CONFIG_SCSI_AHCI 382 383 #ifdef CONFIG_SCSI_AHCI 384 #define CONFIG_SATA_ULI5288 385 #define CFG_SCSI_MAX_SCSI_ID 4 386 #define CFG_SCSI_MAX_LUN 1 387 #define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) 388 #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE 389 #endif 390 391 #define CONFIG_MPC86XX_PCI2 392 393 #endif /* CONFIG_PCI */ 394 395 #if defined(CONFIG_TSEC_ENET) 396 397 #ifndef CONFIG_NET_MULTI 398 #define CONFIG_NET_MULTI 1 399 #endif 400 401 #define CONFIG_MII 1 /* MII PHY management */ 402 403 #define CONFIG_TSEC1 1 404 #define CONFIG_TSEC1_NAME "eTSEC1" 405 #define CONFIG_TSEC2 1 406 #define CONFIG_TSEC2_NAME "eTSEC2" 407 #define CONFIG_TSEC3 1 408 #define CONFIG_TSEC3_NAME "eTSEC3" 409 #define CONFIG_TSEC4 1 410 #define CONFIG_TSEC4_NAME "eTSEC4" 411 412 #define TSEC1_PHY_ADDR 0 413 #define TSEC2_PHY_ADDR 1 414 #define TSEC3_PHY_ADDR 2 415 #define TSEC4_PHY_ADDR 3 416 #define TSEC1_PHYIDX 0 417 #define TSEC2_PHYIDX 0 418 #define TSEC3_PHYIDX 0 419 #define TSEC4_PHYIDX 0 420 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 421 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 422 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 423 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 424 425 #define CONFIG_ETHPRIME "eTSEC1" 426 427 #endif /* CONFIG_TSEC_ENET */ 428 429 /* 430 * BAT0 2G Cacheable, non-guarded 431 * 0x0000_0000 2G DDR 432 */ 433 #define CFG_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) 434 #define CFG_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) 435 #define CFG_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) 436 #define CFG_IBAT0U CFG_DBAT0U 437 438 /* 439 * BAT1 1G Cache-inhibited, guarded 440 * 0x8000_0000 512M PCI-Express 1 Memory 441 * 0xa000_0000 512M PCI-Express 2 Memory 442 * Changed it for operating from 0xd0000000 443 */ 444 #define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \ 445 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 446 #define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) 447 #define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 448 #define CFG_IBAT1U CFG_DBAT1U 449 450 /* 451 * BAT2 512M Cache-inhibited, guarded 452 * 0xc000_0000 512M RapidIO Memory 453 */ 454 #define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \ 455 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 456 #define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) 457 #define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 458 #define CFG_IBAT2U CFG_DBAT2U 459 460 /* 461 * BAT3 4M Cache-inhibited, guarded 462 * 0xf800_0000 4M CCSR 463 */ 464 #define CFG_DBAT3L ( CFG_CCSRBAR | BATL_PP_RW \ 465 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 466 #define CFG_DBAT3U (CFG_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) 467 #define CFG_IBAT3L (CFG_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) 468 #define CFG_IBAT3U CFG_DBAT3U 469 470 /* 471 * BAT4 32M Cache-inhibited, guarded 472 * 0xe200_0000 16M PCI-Express 1 I/O 473 * 0xe300_0000 16M PCI-Express 2 I/0 474 * Note that this is at 0xe0000000 475 */ 476 #define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \ 477 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 478 #define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) 479 #define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 480 #define CFG_IBAT4U CFG_DBAT4U 481 482 /* 483 * BAT5 128K Cacheable, non-guarded 484 * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) 485 */ 486 #define CFG_DBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) 487 #define CFG_DBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 488 #define CFG_IBAT5L CFG_DBAT5L 489 #define CFG_IBAT5U CFG_DBAT5U 490 491 /* 492 * BAT6 32M Cache-inhibited, guarded 493 * 0xfe00_0000 32M FLASH 494 */ 495 #define CFG_DBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ 496 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 497 #define CFG_DBAT6U ((CFG_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) 498 #define CFG_IBAT6L ((CFG_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) 499 #define CFG_IBAT6U CFG_DBAT6U 500 501 #define CFG_DBAT7L 0x00000000 502 #define CFG_DBAT7U 0x00000000 503 #define CFG_IBAT7L 0x00000000 504 #define CFG_IBAT7U 0x00000000 505 506 /* 507 * Environment 508 */ 509 #ifndef CFG_RAMBOOT 510 #define CFG_ENV_IS_IN_FLASH 1 511 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x60000) 512 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ 513 #define CFG_ENV_SIZE 0x2000 514 #else 515 #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 516 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) 517 #define CFG_ENV_SIZE 0x2000 518 #endif 519 520 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 521 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 522 523 524 /* 525 * BOOTP options 526 */ 527 #define CONFIG_BOOTP_BOOTFILESIZE 528 #define CONFIG_BOOTP_BOOTPATH 529 #define CONFIG_BOOTP_GATEWAY 530 #define CONFIG_BOOTP_HOSTNAME 531 532 533 /* 534 * Command line configuration. 535 */ 536 #include <config_cmd_default.h> 537 538 #define CONFIG_CMD_PING 539 #define CONFIG_CMD_I2C 540 #define CONFIG_CMD_REGINFO 541 542 #if defined(CFG_RAMBOOT) 543 #undef CONFIG_CMD_ENV 544 #endif 545 546 #if defined(CONFIG_PCI) 547 #define CONFIG_CMD_PCI 548 #define CONFIG_CMD_SCSI 549 #define CONFIG_CMD_EXT2 550 #define CONFIG_CMD_USB 551 #endif 552 553 554 #undef CONFIG_WATCHDOG /* watchdog disabled */ 555 556 /* 557 * Miscellaneous configurable options 558 */ 559 #define CFG_LONGHELP /* undef to save memory */ 560 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 561 #define CFG_LOAD_ADDR 0x2000000 /* default load address */ 562 #define CFG_PROMPT "=> " /* Monitor Command Prompt */ 563 564 #if defined(CONFIG_CMD_KGDB) 565 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 566 #else 567 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 568 #endif 569 570 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 571 #define CFG_MAXARGS 16 /* max number of command args */ 572 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 573 #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ 574 575 /* 576 * For booting Linux, the board info and command line data 577 * have to be in the first 8 MB of memory, since this is 578 * the maximum mapped by the Linux kernel during initialization. 579 */ 580 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 581 582 /* 583 * Internal Definitions 584 * 585 * Boot Flags 586 */ 587 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 588 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 589 590 #if defined(CONFIG_CMD_KGDB) 591 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 592 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 593 #endif 594 595 /* 596 * Environment Configuration 597 */ 598 599 /* The mac addresses for all ethernet interface */ 600 #if defined(CONFIG_TSEC_ENET) 601 #define CONFIG_ETHADDR 00:E0:0C:00:00:01 602 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 603 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 604 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 605 #endif 606 607 #define CONFIG_HAS_ETH0 1 608 #define CONFIG_HAS_ETH1 1 609 #define CONFIG_HAS_ETH2 1 610 #define CONFIG_HAS_ETH3 1 611 612 #define CONFIG_IPADDR 192.168.1.100 613 614 #define CONFIG_HOSTNAME unknown 615 #define CONFIG_ROOTPATH /opt/nfsroot 616 #define CONFIG_BOOTFILE uImage 617 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 618 619 #define CONFIG_SERVERIP 192.168.1.1 620 #define CONFIG_GATEWAYIP 192.168.1.1 621 #define CONFIG_NETMASK 255.255.255.0 622 623 /* default location for tftp and bootm */ 624 #define CONFIG_LOADADDR 1000000 625 626 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 627 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 628 629 #define CONFIG_BAUDRATE 115200 630 631 #define CONFIG_EXTRA_ENV_SETTINGS \ 632 "netdev=eth0\0" \ 633 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 634 "tftpflash=tftpboot $loadaddr $uboot; " \ 635 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 636 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 637 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 638 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 639 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 640 "consoledev=ttyS0\0" \ 641 "ramdiskaddr=2000000\0" \ 642 "ramdiskfile=your.ramdisk.u-boot\0" \ 643 "fdtaddr=c00000\0" \ 644 "fdtfile=mpc8641_hpcn.dtb\0" \ 645 "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ 646 "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ 647 "maxcpus=2" 648 649 650 #define CONFIG_NFSBOOTCOMMAND \ 651 "setenv bootargs root=/dev/nfs rw " \ 652 "nfsroot=$serverip:$rootpath " \ 653 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 654 "console=$consoledev,$baudrate $othbootargs;" \ 655 "tftp $loadaddr $bootfile;" \ 656 "tftp $fdtaddr $fdtfile;" \ 657 "bootm $loadaddr - $fdtaddr" 658 659 #define CONFIG_RAMBOOTCOMMAND \ 660 "setenv bootargs root=/dev/ram rw " \ 661 "console=$consoledev,$baudrate $othbootargs;" \ 662 "tftp $ramdiskaddr $ramdiskfile;" \ 663 "tftp $loadaddr $bootfile;" \ 664 "tftp $fdtaddr $fdtfile;" \ 665 "bootm $loadaddr $ramdiskaddr $fdtaddr" 666 667 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 668 669 #endif /* __CONFIG_H */ 670