1 /* 2 * Copyright 2006, 2010-2011 Freescale Semiconductor. 3 * 4 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * MPC8641HPCN board configuration file 27 * 28 * Make sure you change the MAC address and other network params first, 29 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. 30 */ 31 32 #ifndef __CONFIG_H 33 #define __CONFIG_H 34 35 /* High Level Configuration Options */ 36 #define CONFIG_MPC86xx 1 /* MPC86xx */ 37 #define CONFIG_MPC8641 1 /* MPC8641 specific */ 38 #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ 39 #define CONFIG_MP 1 /* support multiple processors */ 40 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ 41 /*#define CONFIG_PHYS_64BIT 1*/ /* Place devices in 36-bit space */ 42 #define CONFIG_ADDR_MAP 1 /* Use addr map */ 43 44 /* 45 * default CCSRBAR is at 0xff700000 46 * assume U-Boot is less than 0.5MB 47 */ 48 #define CONFIG_SYS_TEXT_BASE 0xeff00000 49 50 #ifdef RUN_DIAG 51 #define CONFIG_SYS_DIAG_ADDR CONFIG_SYS_FLASH_BASE 52 #endif 53 54 /* 55 * virtual address to be used for temporary mappings. There 56 * should be 128k free at this VA. 57 */ 58 #define CONFIG_SYS_SCRATCH_VA 0xe0000000 59 60 #define CONFIG_SYS_SRIO 61 #define CONFIG_SRIO1 /* SRIO port 1 */ 62 63 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 64 #define CONFIG_PCIE1 1 /* PCIE controler 1 (ULI bridge) */ 65 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot) */ 66 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 67 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 68 #define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ 69 70 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 71 #define CONFIG_ENV_OVERWRITE 72 73 #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ 74 #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ 75 #define CONFIG_SYS_NUM_ADDR_MAP 8 /* Number of addr map slots = 8 dbats */ 76 77 #define CONFIG_ALTIVEC 1 78 79 /* 80 * L2CR setup -- make sure this is right for your board! 81 */ 82 #define CONFIG_SYS_L2 83 #define L2_INIT 0 84 #define L2_ENABLE (L2CR_L2E) 85 86 #ifndef CONFIG_SYS_CLK_FREQ 87 #ifndef __ASSEMBLY__ 88 extern unsigned long get_board_sys_clk(unsigned long dummy); 89 #endif 90 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 91 #endif 92 93 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ 94 #define CONFIG_SYS_MEMTEST_END 0x00400000 95 96 /* 97 * With the exception of PCI Memory and Rapid IO, most devices will simply 98 * add CONFIG_SYS_PHYS_ADDR_HIGH to the front of the 32-bit VA to get the PA 99 * when 36-bit is enabled. When 36-bit is not enabled, these bits are 0. 100 */ 101 #ifdef CONFIG_PHYS_64BIT 102 #define CONFIG_SYS_PHYS_ADDR_HIGH 0x0000000f 103 #else 104 #define CONFIG_SYS_PHYS_ADDR_HIGH 0x00000000 105 #endif 106 107 /* 108 * Base addresses -- Note these are effective addresses where the 109 * actual resources get mapped (not physical addresses) 110 */ 111 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 112 #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ 113 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 114 115 /* Physical addresses */ 116 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 117 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH CONFIG_SYS_PHYS_ADDR_HIGH 118 #define CONFIG_SYS_CCSRBAR_PHYS \ 119 PAIRED_PHYS_TO_PHYS(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ 120 CONFIG_SYS_CCSRBAR_PHYS_HIGH) 121 122 #define CONFIG_HWCONFIG /* use hwconfig to control memory interleaving */ 123 124 /* 125 * DDR Setup 126 */ 127 #define CONFIG_FSL_DDR2 128 #undef CONFIG_FSL_DDR_INTERACTIVE 129 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 130 #define CONFIG_DDR_SPD 131 132 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 133 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 134 135 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 136 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 137 #define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */ 138 #define CONFIG_VERY_BIG_RAM 139 140 #define CONFIG_NUM_DDR_CONTROLLERS 2 141 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 142 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 143 144 /* 145 * I2C addresses of SPD EEPROMs 146 */ 147 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 148 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 0 DIMM 1 */ 149 #define SPD_EEPROM_ADDRESS3 0x53 /* CTLR 1 DIMM 0 */ 150 #define SPD_EEPROM_ADDRESS4 0x54 /* CTLR 1 DIMM 1 */ 151 152 153 /* 154 * These are used when DDR doesn't use SPD. 155 */ 156 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 157 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F 158 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 159 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 160 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 161 #define CONFIG_SYS_DDR_TIMING_1 0x39357322 162 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 163 #define CONFIG_SYS_DDR_MODE_1 0x00480432 164 #define CONFIG_SYS_DDR_MODE_2 0x00000000 165 #define CONFIG_SYS_DDR_INTERVAL 0x06090100 166 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 167 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 168 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 169 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 170 #define CONFIG_SYS_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ 171 #define CONFIG_SYS_DDR_CONTROL2 0x04400000 172 173 #define CONFIG_ID_EEPROM 174 #define CONFIG_SYS_I2C_EEPROM_NXID 175 #define CONFIG_ID_EEPROM 176 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 177 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 178 179 #define CONFIG_SYS_FLASH_BASE 0xef800000 /* start of FLASH 8M */ 180 #define CONFIG_SYS_FLASH_BASE_PHYS_LOW CONFIG_SYS_FLASH_BASE 181 #define CONFIG_SYS_FLASH_BASE_PHYS \ 182 PAIRED_PHYS_TO_PHYS(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ 183 CONFIG_SYS_PHYS_ADDR_HIGH) 184 185 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 186 187 #define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 188 | 0x00001001) /* port size 16bit */ 189 #define CONFIG_SYS_OR0_PRELIM 0xff806ff7 /* 8MB Boot Flash area*/ 190 191 #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(CF_BASE_PHYS) \ 192 | 0x00001001) /* port size 16bit */ 193 #define CONFIG_SYS_OR2_PRELIM 0xffffeff7 /* 32k Compact Flash */ 194 195 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) \ 196 | 0x00000801) /* port size 8bit */ 197 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32k PIXIS area*/ 198 199 /* 200 * The LBC_BASE is the base of the region that contains the PIXIS and the CF. 201 * The PIXIS and CF by themselves aren't large enough to take up the 128k 202 * required for the smallest BAT mapping, so there's a 64k hole. 203 */ 204 #define CONFIG_SYS_LBC_BASE 0xffde0000 205 #define CONFIG_SYS_LBC_BASE_PHYS_LOW CONFIG_SYS_LBC_BASE 206 207 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 208 #define PIXIS_BASE (CONFIG_SYS_LBC_BASE + 0x00010000) 209 #define PIXIS_BASE_PHYS_LOW (CONFIG_SYS_LBC_BASE_PHYS_LOW + 0x00010000) 210 #define PIXIS_BASE_PHYS PAIRED_PHYS_TO_PHYS(PIXIS_BASE_PHYS_LOW, \ 211 CONFIG_SYS_PHYS_ADDR_HIGH) 212 #define PIXIS_SIZE 0x00008000 /* 32k */ 213 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 214 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 215 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 216 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 217 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ 218 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 219 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 220 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 221 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 222 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 223 #define PIXIS_VBOOT_FMAP 0x80 /* VBOOT - CFG_FLASHMAP */ 224 #define PIXIS_VBOOT_FBANK 0x40 /* VBOOT - CFG_FLASHBANK */ 225 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 226 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 227 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 228 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 229 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ 230 231 /* Compact flash shares a BAT with PIXIS; make sure they're contiguous */ 232 #define CF_BASE (PIXIS_BASE + PIXIS_SIZE) 233 #define CF_BASE_PHYS (PIXIS_BASE_PHYS + PIXIS_SIZE) 234 235 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 236 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 237 238 #undef CONFIG_SYS_FLASH_CHECKSUM 239 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 240 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 241 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 242 #define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */ 243 244 #define CONFIG_FLASH_CFI_DRIVER 245 #define CONFIG_SYS_FLASH_CFI 246 #define CONFIG_SYS_FLASH_EMPTY_INFO 247 248 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 249 #define CONFIG_SYS_RAMBOOT 250 #else 251 #undef CONFIG_SYS_RAMBOOT 252 #endif 253 254 #if defined(CONFIG_SYS_RAMBOOT) 255 #undef CONFIG_SPD_EEPROM 256 #define CONFIG_SYS_SDRAM_SIZE 256 257 #endif 258 259 #undef CONFIG_CLOCKS_IN_MHZ 260 261 #define CONFIG_SYS_INIT_RAM_LOCK 1 262 #ifndef CONFIG_SYS_INIT_RAM_LOCK 263 #define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ 264 #else 265 #define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ 266 #endif 267 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ 268 269 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 270 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 271 272 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 273 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 274 275 /* Serial Port */ 276 #define CONFIG_CONS_INDEX 1 277 #define CONFIG_SYS_NS16550 278 #define CONFIG_SYS_NS16550_SERIAL 279 #define CONFIG_SYS_NS16550_REG_SIZE 1 280 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 281 282 #define CONFIG_SYS_BAUDRATE_TABLE \ 283 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 284 285 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 286 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 287 288 /* Use the HUSH parser */ 289 #define CONFIG_SYS_HUSH_PARSER 290 291 /* 292 * Pass open firmware flat tree to kernel 293 */ 294 #define CONFIG_OF_LIBFDT 1 295 #define CONFIG_OF_BOARD_SETUP 1 296 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 297 298 /* 299 * I2C 300 */ 301 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 302 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 303 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 304 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 305 #define CONFIG_SYS_I2C_SLAVE 0x7F 306 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 307 #define CONFIG_SYS_I2C_OFFSET 0x3100 308 309 /* 310 * RapidIO MMU 311 */ 312 #define CONFIG_SYS_SRIO1_MEM_BASE 0x80000000 /* base address */ 313 #ifdef CONFIG_PHYS_64BIT 314 #define CONFIG_SYS_SRIO1_MEM_PHYS_LOW 0x00000000 315 #define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH 0x0000000c 316 #else 317 #define CONFIG_SYS_SRIO1_MEM_PHYS_LOW CONFIG_SYS_SRIO1_MEM_BASE 318 #define CONFIG_SYS_SRIO1_MEM_PHYS_HIGH 0x00000000 319 #endif 320 #define CONFIG_SYS_SRIO1_MEM_PHYS \ 321 PAIRED_PHYS_TO_PHYS(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ 322 CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) 323 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ 324 325 /* 326 * General PCI 327 * Addresses are mapped 1-1. 328 */ 329 330 #define CONFIG_SYS_PCIE1_NAME "ULI" 331 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 332 #ifdef CONFIG_PHYS_64BIT 333 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 334 #define CONFIG_SYS_PCIE1_MEM_PHYS_LOW 0x00000000 335 #define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 0x0000000c 336 #else 337 #define CONFIG_SYS_PCIE1_MEM_BUS CONFIG_SYS_PCIE1_MEM_VIRT 338 #define CONFIG_SYS_PCIE1_MEM_PHYS_LOW CONFIG_SYS_PCIE1_MEM_VIRT 339 #define CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 0x00000000 340 #endif 341 #define CONFIG_SYS_PCIE1_MEM_PHYS \ 342 PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ 343 CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) 344 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 345 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 346 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 347 #define CONFIG_SYS_PCIE1_IO_PHYS_LOW CONFIG_SYS_PCIE1_IO_VIRT 348 #define CONFIG_SYS_PCIE1_IO_PHYS \ 349 PAIRED_PHYS_TO_PHYS(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ 350 CONFIG_SYS_PHYS_ADDR_HIGH) 351 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64K */ 352 353 #ifdef CONFIG_PHYS_64BIT 354 /* 355 * Use the same PCI bus address on PCIE1 and PCIE2 if we have PHYS_64BIT. 356 * This will increase the amount of PCI address space available for 357 * for mapping RAM. 358 */ 359 #define CONFIG_SYS_PCIE2_MEM_BUS CONFIG_SYS_PCIE1_MEM_BUS 360 #else 361 #define CONFIG_SYS_PCIE2_MEM_BUS (CONFIG_SYS_PCIE1_MEM_BUS \ 362 + CONFIG_SYS_PCIE1_MEM_SIZE) 363 #endif 364 #define CONFIG_SYS_PCIE2_MEM_VIRT (CONFIG_SYS_PCIE1_MEM_VIRT \ 365 + CONFIG_SYS_PCIE1_MEM_SIZE) 366 #define CONFIG_SYS_PCIE2_MEM_PHYS_LOW (CONFIG_SYS_PCIE1_MEM_PHYS_LOW \ 367 + CONFIG_SYS_PCIE1_MEM_SIZE) 368 #define CONFIG_SYS_PCIE2_MEM_PHYS_HIGH CONFIG_SYS_PCIE1_MEM_PHYS_HIGH 369 #define CONFIG_SYS_PCIE2_MEM_PHYS (CONFIG_SYS_PCIE1_MEM_PHYS \ 370 + CONFIG_SYS_PCIE1_MEM_SIZE) 371 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 372 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 373 #define CONFIG_SYS_PCIE2_IO_VIRT (CONFIG_SYS_PCIE1_IO_VIRT \ 374 + CONFIG_SYS_PCIE1_IO_SIZE) 375 #define CONFIG_SYS_PCIE2_IO_PHYS_LOW (CONFIG_SYS_PCIE1_IO_PHYS_LOW \ 376 + CONFIG_SYS_PCIE1_IO_SIZE) 377 #define CONFIG_SYS_PCIE2_IO_PHYS (CONFIG_SYS_PCIE1_IO_PHYS \ 378 + CONFIG_SYS_PCIE1_IO_SIZE) 379 #define CONFIG_SYS_PCIE2_IO_SIZE CONFIG_SYS_PCIE1_IO_SIZE 380 381 #if defined(CONFIG_PCI) 382 383 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 384 385 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 386 387 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 388 389 #define CONFIG_RTL8139 390 391 #undef CONFIG_EEPRO100 392 #undef CONFIG_TULIP 393 394 /************************************************************ 395 * USB support 396 ************************************************************/ 397 #define CONFIG_PCI_OHCI 1 398 #define CONFIG_USB_OHCI_NEW 1 399 #define CONFIG_USB_KEYBOARD 1 400 #define CONFIG_SYS_STDIO_DEREGISTER 401 #define CONFIG_SYS_USB_EVENT_POLL 1 402 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" 403 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 404 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 405 406 /*PCIE video card used*/ 407 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT 408 409 /*PCI video card used*/ 410 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT*/ 411 412 /* video */ 413 #define CONFIG_VIDEO 414 415 #if defined(CONFIG_VIDEO) 416 #define CONFIG_BIOSEMU 417 #define CONFIG_CFB_CONSOLE 418 #define CONFIG_VIDEO_SW_CURSOR 419 #define CONFIG_VGA_AS_SINGLE_DEVICE 420 #define CONFIG_ATI_RADEON_FB 421 #define CONFIG_VIDEO_LOGO 422 /*#define CONFIG_CONSOLE_CURSOR*/ 423 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT 424 #endif 425 426 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 427 428 #define CONFIG_DOS_PARTITION 429 #define CONFIG_SCSI_AHCI 430 431 #ifdef CONFIG_SCSI_AHCI 432 #define CONFIG_SATA_ULI5288 433 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 434 #define CONFIG_SYS_SCSI_MAX_LUN 1 435 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 436 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 437 #endif 438 439 #endif /* CONFIG_PCI */ 440 441 #if defined(CONFIG_TSEC_ENET) 442 443 #define CONFIG_MII 1 /* MII PHY management */ 444 445 #define CONFIG_TSEC1 1 446 #define CONFIG_TSEC1_NAME "eTSEC1" 447 #define CONFIG_TSEC2 1 448 #define CONFIG_TSEC2_NAME "eTSEC2" 449 #define CONFIG_TSEC3 1 450 #define CONFIG_TSEC3_NAME "eTSEC3" 451 #define CONFIG_TSEC4 1 452 #define CONFIG_TSEC4_NAME "eTSEC4" 453 454 #define TSEC1_PHY_ADDR 0 455 #define TSEC2_PHY_ADDR 1 456 #define TSEC3_PHY_ADDR 2 457 #define TSEC4_PHY_ADDR 3 458 #define TSEC1_PHYIDX 0 459 #define TSEC2_PHYIDX 0 460 #define TSEC3_PHYIDX 0 461 #define TSEC4_PHYIDX 0 462 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 463 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 464 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 465 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 466 467 #define CONFIG_ETHPRIME "eTSEC1" 468 469 #endif /* CONFIG_TSEC_ENET */ 470 471 472 #ifdef CONFIG_PHYS_64BIT 473 #define PHYS_HIGH_TO_BXPN(x) ((x & 0x0000000e) << 8) 474 #define PHYS_HIGH_TO_BX(x) ((x & 0x00000001) << 2) 475 476 /* Put physical address into the BAT format */ 477 #define BAT_PHYS_ADDR(low, high) \ 478 (low | PHYS_HIGH_TO_BXPN(high) | PHYS_HIGH_TO_BX(high)) 479 /* Convert high/low pairs to actual 64-bit value */ 480 #define PAIRED_PHYS_TO_PHYS(low, high) (low | ((u64)high << 32)) 481 #else 482 /* 32-bit systems just ignore the "high" bits */ 483 #define BAT_PHYS_ADDR(low, high) (low) 484 #define PAIRED_PHYS_TO_PHYS(low, high) (low) 485 #endif 486 487 /* 488 * BAT0 DDR 489 */ 490 #define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) 491 #define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) 492 493 /* 494 * BAT1 LBC (PIXIS/CF) 495 */ 496 #define CONFIG_SYS_DBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \ 497 CONFIG_SYS_PHYS_ADDR_HIGH) \ 498 | BATL_PP_RW | BATL_CACHEINHIBIT | \ 499 BATL_GUARDEDSTORAGE) 500 #define CONFIG_SYS_DBAT1U (CONFIG_SYS_LBC_BASE | BATU_BL_128K \ 501 | BATU_VS | BATU_VP) 502 #define CONFIG_SYS_IBAT1L (BAT_PHYS_ADDR(CONFIG_SYS_LBC_BASE_PHYS_LOW, \ 503 CONFIG_SYS_PHYS_ADDR_HIGH) \ 504 | BATL_PP_RW | BATL_MEMCOHERENCE) 505 #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U 506 507 /* if CONFIG_PCI: 508 * BAT2 PCIE1 and PCIE1 MEM 509 * if CONFIG_RIO 510 * BAT2 Rapidio Memory 511 */ 512 #ifdef CONFIG_PCI 513 #define CONFIG_PCI_INDIRECT_BRIDGE 514 #define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ 515 CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ 516 | BATL_PP_RW | BATL_CACHEINHIBIT \ 517 | BATL_GUARDEDSTORAGE) 518 #define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_1G \ 519 | BATU_VS | BATU_VP) 520 #define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_MEM_PHYS_LOW, \ 521 CONFIG_SYS_PCIE1_MEM_PHYS_HIGH) \ 522 | BATL_PP_RW | BATL_CACHEINHIBIT) 523 #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U 524 #else /* CONFIG_RIO */ 525 #define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ 526 CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \ 527 | BATL_PP_RW | BATL_CACHEINHIBIT | \ 528 BATL_GUARDEDSTORAGE) 529 #define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \ 530 | BATU_VS | BATU_VP) 531 #define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS_LOW, \ 532 CONFIG_SYS_SRIO1_MEM_PHYS_HIGH) \ 533 | BATL_PP_RW | BATL_CACHEINHIBIT) 534 #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U 535 #endif 536 537 /* 538 * BAT3 CCSR Space 539 */ 540 #define CONFIG_SYS_DBAT3L (BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ 541 CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ 542 | BATL_PP_RW | BATL_CACHEINHIBIT \ 543 | BATL_GUARDEDSTORAGE) 544 #define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS \ 545 | BATU_VP) 546 #define CONFIG_SYS_IBAT3L (BAT_PHYS_ADDR(CONFIG_SYS_CCSRBAR_PHYS_LOW, \ 547 CONFIG_SYS_CCSRBAR_PHYS_HIGH) \ 548 | BATL_PP_RW | BATL_CACHEINHIBIT) 549 #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U 550 551 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) 552 #define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ 553 | BATL_PP_RW | BATL_CACHEINHIBIT \ 554 | BATL_GUARDEDSTORAGE) 555 #define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ 556 | BATU_BL_1M | BATU_VS | BATU_VP) 557 #define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ 558 | BATL_PP_RW | BATL_CACHEINHIBIT) 559 #define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU 560 #endif 561 562 /* 563 * BAT4 PCIE1_IO and PCIE2_IO 564 */ 565 #define CONFIG_SYS_DBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ 566 CONFIG_SYS_PHYS_ADDR_HIGH) \ 567 | BATL_PP_RW | BATL_CACHEINHIBIT \ 568 | BATL_GUARDEDSTORAGE) 569 #define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_128K \ 570 | BATU_VS | BATU_VP) 571 #define CONFIG_SYS_IBAT4L (BAT_PHYS_ADDR(CONFIG_SYS_PCIE1_IO_PHYS_LOW, \ 572 CONFIG_SYS_PHYS_ADDR_HIGH) \ 573 | BATL_PP_RW | BATL_CACHEINHIBIT) 574 #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U 575 576 /* 577 * BAT5 Init RAM for stack in the CPU DCache (no backing memory) 578 */ 579 #define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) 580 #define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 581 #define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L 582 #define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U 583 584 /* 585 * BAT6 FLASH 586 */ 587 #define CONFIG_SYS_DBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ 588 CONFIG_SYS_PHYS_ADDR_HIGH) \ 589 | BATL_PP_RW | BATL_CACHEINHIBIT \ 590 | BATL_GUARDEDSTORAGE) 591 #define CONFIG_SYS_DBAT6U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | BATU_VS \ 592 | BATU_VP) 593 #define CONFIG_SYS_IBAT6L (BAT_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_LOW, \ 594 CONFIG_SYS_PHYS_ADDR_HIGH) \ 595 | BATL_PP_RW | BATL_MEMCOHERENCE) 596 #define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U 597 598 /* Map the last 1M of flash where we're running from reset */ 599 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ 600 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 601 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP) 602 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ 603 | BATL_MEMCOHERENCE) 604 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY 605 606 /* 607 * BAT7 FREE - used later for tmp mappings 608 */ 609 #define CONFIG_SYS_DBAT7L 0x00000000 610 #define CONFIG_SYS_DBAT7U 0x00000000 611 #define CONFIG_SYS_IBAT7L 0x00000000 612 #define CONFIG_SYS_IBAT7U 0x00000000 613 614 /* 615 * Environment 616 */ 617 #ifndef CONFIG_SYS_RAMBOOT 618 #define CONFIG_ENV_IS_IN_FLASH 1 619 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x60000) 620 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ 621 #else 622 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 623 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 624 #endif 625 #define CONFIG_ENV_SIZE 0x2000 626 627 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 628 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 629 630 631 /* 632 * BOOTP options 633 */ 634 #define CONFIG_BOOTP_BOOTFILESIZE 635 #define CONFIG_BOOTP_BOOTPATH 636 #define CONFIG_BOOTP_GATEWAY 637 #define CONFIG_BOOTP_HOSTNAME 638 639 640 /* 641 * Command line configuration. 642 */ 643 #include <config_cmd_default.h> 644 645 #define CONFIG_CMD_PING 646 #define CONFIG_CMD_I2C 647 #define CONFIG_CMD_REGINFO 648 649 #if defined(CONFIG_SYS_RAMBOOT) 650 #undef CONFIG_CMD_SAVEENV 651 #endif 652 653 #if defined(CONFIG_PCI) 654 #define CONFIG_CMD_PCI 655 #define CONFIG_CMD_SCSI 656 #define CONFIG_CMD_EXT2 657 #define CONFIG_CMD_USB 658 #endif 659 660 661 #undef CONFIG_WATCHDOG /* watchdog disabled */ 662 663 /* 664 * Miscellaneous configurable options 665 */ 666 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 667 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 668 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 669 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 670 671 #if defined(CONFIG_CMD_KGDB) 672 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 673 #else 674 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 675 #endif 676 677 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 678 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 679 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 680 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 681 682 /* 683 * For booting Linux, the board info and command line data 684 * have to be in the first 8 MB of memory, since this is 685 * the maximum mapped by the Linux kernel during initialization. 686 */ 687 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 688 689 #if defined(CONFIG_CMD_KGDB) 690 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 691 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 692 #endif 693 694 /* 695 * Environment Configuration 696 */ 697 698 /* The mac addresses for all ethernet interface */ 699 #if defined(CONFIG_TSEC_ENET) 700 #define CONFIG_ETHADDR 00:E0:0C:00:00:01 701 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 702 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 703 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 704 #endif 705 706 #define CONFIG_HAS_ETH0 1 707 #define CONFIG_HAS_ETH1 1 708 #define CONFIG_HAS_ETH2 1 709 #define CONFIG_HAS_ETH3 1 710 711 #define CONFIG_IPADDR 192.168.1.100 712 713 #define CONFIG_HOSTNAME unknown 714 #define CONFIG_ROOTPATH "/opt/nfsroot" 715 #define CONFIG_BOOTFILE "uImage" 716 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 717 718 #define CONFIG_SERVERIP 192.168.1.1 719 #define CONFIG_GATEWAYIP 192.168.1.1 720 #define CONFIG_NETMASK 255.255.255.0 721 722 /* default location for tftp and bootm */ 723 #define CONFIG_LOADADDR 1000000 724 725 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 726 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 727 728 #define CONFIG_BAUDRATE 115200 729 730 #define CONFIG_EXTRA_ENV_SETTINGS \ 731 "netdev=eth0\0" \ 732 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 733 "tftpflash=tftpboot $loadaddr $uboot; " \ 734 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 735 " +$filesize; " \ 736 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 737 " +$filesize; " \ 738 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 739 " $filesize; " \ 740 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 741 " +$filesize; " \ 742 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 743 " $filesize\0" \ 744 "consoledev=ttyS0\0" \ 745 "ramdiskaddr=2000000\0" \ 746 "ramdiskfile=your.ramdisk.u-boot\0" \ 747 "fdtaddr=c00000\0" \ 748 "fdtfile=mpc8641_hpcn.dtb\0" \ 749 "en-wd=mw.b ffdf0010 0x08; echo -expect:- 08; md.b ffdf0010 1\0" \ 750 "dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \ 751 "maxcpus=2" 752 753 754 #define CONFIG_NFSBOOTCOMMAND \ 755 "setenv bootargs root=/dev/nfs rw " \ 756 "nfsroot=$serverip:$rootpath " \ 757 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 758 "console=$consoledev,$baudrate $othbootargs;" \ 759 "tftp $loadaddr $bootfile;" \ 760 "tftp $fdtaddr $fdtfile;" \ 761 "bootm $loadaddr - $fdtaddr" 762 763 #define CONFIG_RAMBOOTCOMMAND \ 764 "setenv bootargs root=/dev/ram rw " \ 765 "console=$consoledev,$baudrate $othbootargs;" \ 766 "tftp $ramdiskaddr $ramdiskfile;" \ 767 "tftp $loadaddr $bootfile;" \ 768 "tftp $fdtaddr $fdtfile;" \ 769 "bootm $loadaddr $ramdiskaddr $fdtaddr" 770 771 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 772 773 #endif /* __CONFIG_H */ 774