1 /* 2 * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8572ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #include "../board/freescale/common/ics307_clk.h" 31 32 #ifdef CONFIG_36BIT 33 #define CONFIG_PHYS_64BIT 34 #endif 35 36 #ifdef CONFIG_NAND 37 #define CONFIG_NAND_U_BOOT 38 #define CONFIG_RAMBOOT_NAND 39 #ifdef CONFIG_NAND_SPL 40 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 41 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ 42 #else 43 #define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds 44 #define CONFIG_SYS_TEXT_BASE 0xf8f82000 45 #endif /* CONFIG_NAND_SPL */ 46 #endif 47 48 #ifndef CONFIG_SYS_TEXT_BASE 49 #define CONFIG_SYS_TEXT_BASE 0xeff80000 50 #endif 51 52 #ifndef CONFIG_RESET_VECTOR_ADDRESS 53 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 54 #endif 55 56 #ifndef CONFIG_SYS_MONITOR_BASE 57 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 58 #endif 59 60 /* High Level Configuration Options */ 61 #define CONFIG_BOOKE 1 /* BOOKE */ 62 #define CONFIG_E500 1 /* BOOKE e500 family */ 63 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 64 #define CONFIG_MPC8572 1 65 #define CONFIG_MPC8572DS 1 66 #define CONFIG_MP 1 /* support multiple processors */ 67 68 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ 69 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 70 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 71 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 72 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 73 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 74 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 75 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 76 77 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 78 79 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 80 #define CONFIG_ENV_OVERWRITE 81 82 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 83 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ 84 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 85 86 /* 87 * These can be toggled for performance analysis, otherwise use default. 88 */ 89 #define CONFIG_L2_CACHE /* toggle L2 cache */ 90 #define CONFIG_BTB /* toggle branch predition */ 91 92 #define CONFIG_ENABLE_36BIT_PHYS 1 93 94 #ifdef CONFIG_PHYS_64BIT 95 #define CONFIG_ADDR_MAP 1 96 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 97 #endif 98 99 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ 100 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 101 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 102 103 /* 104 * Config the L2 Cache as L2 SRAM 105 */ 106 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 107 #ifdef CONFIG_PHYS_64BIT 108 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull 109 #else 110 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 111 #endif 112 #define CONFIG_SYS_L2_SIZE (512 << 10) 113 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 114 115 #define CONFIG_SYS_CCSRBAR 0xffe00000 116 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 117 118 #if defined(CONFIG_NAND_SPL) 119 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 120 #endif 121 122 /* DDR Setup */ 123 #define CONFIG_VERY_BIG_RAM 124 #define CONFIG_FSL_DDR2 125 #undef CONFIG_FSL_DDR_INTERACTIVE 126 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 127 #define CONFIG_DDR_SPD 128 129 #define CONFIG_DDR_ECC 130 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 131 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 132 133 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 134 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 135 136 #define CONFIG_NUM_DDR_CONTROLLERS 2 137 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 138 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 139 140 /* I2C addresses of SPD EEPROMs */ 141 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD EEPROMS locate on I2C bus 1 */ 142 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 143 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ 144 145 /* These are used when DDR doesn't use SPD. */ 146 #define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ 147 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 148 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */ 149 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 150 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 151 #define CONFIG_SYS_DDR_TIMING_1 0x626b2634 152 #define CONFIG_SYS_DDR_TIMING_2 0x062874cf 153 #define CONFIG_SYS_DDR_MODE_1 0x00440462 154 #define CONFIG_SYS_DDR_MODE_2 0x00000000 155 #define CONFIG_SYS_DDR_INTERVAL 0x0c300100 156 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 157 #define CONFIG_SYS_DDR_CLK_CTRL 0x00800000 158 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 159 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 160 #define CONFIG_SYS_DDR_CONTROL 0xc3000008 /* Type = DDR2 */ 161 #define CONFIG_SYS_DDR_CONTROL2 0x24400000 162 163 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 164 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 165 #define CONFIG_SYS_DDR_SBE 0x00010000 166 167 /* 168 * Make sure required options are set 169 */ 170 #ifndef CONFIG_SPD_EEPROM 171 #error ("CONFIG_SPD_EEPROM is required") 172 #endif 173 174 #undef CONFIG_CLOCKS_IN_MHZ 175 176 /* 177 * Memory map 178 * 179 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 180 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 181 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 182 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 183 * 184 * Localbus cacheable (TBD) 185 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 186 * 187 * Localbus non-cacheable 188 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 189 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 190 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 191 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 192 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 193 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 194 */ 195 196 /* 197 * Local Bus Definitions 198 */ 199 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 200 #ifdef CONFIG_PHYS_64BIT 201 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 202 #else 203 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 204 #endif 205 206 207 #define CONFIG_FLASH_BR_PRELIM \ 208 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ 209 | BR_PS_16 | BR_V) 210 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 211 212 #define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 213 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 214 215 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 216 #define CONFIG_SYS_FLASH_QUIET_TEST 217 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 218 219 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 220 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 221 #undef CONFIG_SYS_FLASH_CHECKSUM 222 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 223 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 224 225 #if defined(CONFIG_RAMBOOT_NAND) 226 #define CONFIG_SYS_RAMBOOT 227 #define CONFIG_SYS_EXTRA_ENV_RELOC 228 #else 229 #undef CONFIG_SYS_RAMBOOT 230 #endif 231 232 #define CONFIG_FLASH_CFI_DRIVER 233 #define CONFIG_SYS_FLASH_CFI 234 #define CONFIG_SYS_FLASH_EMPTY_INFO 235 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 236 237 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 238 239 #define CONFIG_HWCONFIG /* enable hwconfig */ 240 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 241 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 242 #ifdef CONFIG_PHYS_64BIT 243 #define PIXIS_BASE_PHYS 0xfffdf0000ull 244 #else 245 #define PIXIS_BASE_PHYS PIXIS_BASE 246 #endif 247 248 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 249 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 250 251 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 252 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 253 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 254 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 255 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 256 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 257 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 258 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 259 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 260 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 261 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 262 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 263 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 264 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 265 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 266 #define PIXIS_VBOOT_LBMAP 0xc0 /* VBOOT - CFG_LBMAP */ 267 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 268 #define PIXIS_VBOOT_LBMAP_PJET 0x01 /* cfg_lbmap - boot from projet */ 269 #define PIXIS_VBOOT_LBMAP_NAND 0x02 /* cfg_lbmap - boot from NAND */ 270 #define PIXIS_VBOOT_LBMAP_NOR1 0x03 /* cfg_lbmap - boot from NOR 1 */ 271 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 272 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 273 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 274 #define PIXIS_VSYSCLK0 0x1C /* VELA SYSCLK0 Register */ 275 #define PIXIS_VSYSCLK1 0x1D /* VELA SYSCLK1 Register */ 276 #define PIXIS_VSYSCLK2 0x1E /* VELA SYSCLK2 Register */ 277 #define PIXIS_VDDRCLK0 0x1F /* VELA DDRCLK0 Register */ 278 #define PIXIS_VDDRCLK1 0x20 /* VELA DDRCLK1 Register */ 279 #define PIXIS_VDDRCLK2 0x21 /* VELA DDRCLK2 Register */ 280 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 281 #define PIXIS_LED 0x25 /* LED Register */ 282 283 #define PIXIS_SPD_SYSCLK_MASK 0x7 /* SYSCLK option */ 284 285 /* old pixis referenced names */ 286 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 287 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 288 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 289 #define PIXIS_VSPEED2_TSEC1SER 0x8 290 #define PIXIS_VSPEED2_TSEC2SER 0x4 291 #define PIXIS_VSPEED2_TSEC3SER 0x2 292 #define PIXIS_VSPEED2_TSEC4SER 0x1 293 #define PIXIS_VCFGEN1_TSEC1SER 0x20 294 #define PIXIS_VCFGEN1_TSEC2SER 0x20 295 #define PIXIS_VCFGEN1_TSEC3SER 0x20 296 #define PIXIS_VCFGEN1_TSEC4SER 0x20 297 #define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \ 298 | PIXIS_VSPEED2_TSEC2SER \ 299 | PIXIS_VSPEED2_TSEC3SER \ 300 | PIXIS_VSPEED2_TSEC4SER) 301 #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \ 302 | PIXIS_VCFGEN1_TSEC2SER \ 303 | PIXIS_VCFGEN1_TSEC3SER \ 304 | PIXIS_VCFGEN1_TSEC4SER) 305 306 #define CONFIG_SYS_INIT_RAM_LOCK 1 307 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 308 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 309 310 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 311 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 312 313 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 314 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 315 316 #ifndef CONFIG_NAND_SPL 317 #define CONFIG_SYS_NAND_BASE 0xffa00000 318 #ifdef CONFIG_PHYS_64BIT 319 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 320 #else 321 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 322 #endif 323 #else 324 #define CONFIG_SYS_NAND_BASE 0xfff00000 325 #ifdef CONFIG_PHYS_64BIT 326 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull 327 #else 328 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 329 #endif 330 #endif 331 332 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 333 CONFIG_SYS_NAND_BASE + 0x40000, \ 334 CONFIG_SYS_NAND_BASE + 0x80000,\ 335 CONFIG_SYS_NAND_BASE + 0xC0000} 336 #define CONFIG_SYS_MAX_NAND_DEVICE 4 337 #define CONFIG_MTD_NAND_VERIFY_WRITE 338 #define CONFIG_CMD_NAND 1 339 #define CONFIG_NAND_FSL_ELBC 1 340 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 341 342 /* NAND boot: 4K NAND loader config */ 343 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 344 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 345 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 346 #define CONFIG_SYS_NAND_U_BOOT_START \ 347 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 348 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 349 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 350 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 351 352 353 /* NAND flash config */ 354 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 355 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 356 | BR_PS_8 /* Port Size = 8 bit */ \ 357 | BR_MS_FCM /* MSEL = FCM */ \ 358 | BR_V) /* valid */ 359 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 360 | OR_FCM_PGS /* Large Page*/ \ 361 | OR_FCM_CSCT \ 362 | OR_FCM_CST \ 363 | OR_FCM_CHT \ 364 | OR_FCM_SCY_1 \ 365 | OR_FCM_TRLX \ 366 | OR_FCM_EHTR) 367 368 #ifdef CONFIG_RAMBOOT_NAND 369 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 370 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 371 #define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 372 #define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 373 #else 374 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 375 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 376 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 377 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 378 #endif 379 #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\ 380 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 381 | BR_PS_8 /* Port Size = 8 bit */ \ 382 | BR_MS_FCM /* MSEL = FCM */ \ 383 | BR_V) /* valid */ 384 #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 385 #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\ 386 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 387 | BR_PS_8 /* Port Size = 8 bit */ \ 388 | BR_MS_FCM /* MSEL = FCM */ \ 389 | BR_V) /* valid */ 390 #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 391 392 #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\ 393 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 394 | BR_PS_8 /* Port Size = 8 bit */ \ 395 | BR_MS_FCM /* MSEL = FCM */ \ 396 | BR_V) /* valid */ 397 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 398 399 400 /* Serial Port - controlled on board with jumper J8 401 * open - index 2 402 * shorted - index 1 403 */ 404 #define CONFIG_CONS_INDEX 1 405 #define CONFIG_SYS_NS16550 406 #define CONFIG_SYS_NS16550_SERIAL 407 #define CONFIG_SYS_NS16550_REG_SIZE 1 408 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 409 #ifdef CONFIG_NAND_SPL 410 #define CONFIG_NS16550_MIN_FUNCTIONS 411 #endif 412 413 #define CONFIG_SYS_BAUDRATE_TABLE \ 414 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 415 416 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 417 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 418 419 /* Use the HUSH parser */ 420 #define CONFIG_SYS_HUSH_PARSER 421 #ifdef CONFIG_SYS_HUSH_PARSER 422 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 423 #endif 424 425 /* 426 * Pass open firmware flat tree 427 */ 428 #define CONFIG_OF_LIBFDT 1 429 #define CONFIG_OF_BOARD_SETUP 1 430 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 431 432 /* new uImage format support */ 433 #define CONFIG_FIT 1 434 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 435 436 /* I2C */ 437 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 438 #define CONFIG_HARD_I2C /* I2C with hardware support */ 439 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 440 #define CONFIG_I2C_MULTI_BUS 441 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 442 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 443 #define CONFIG_SYS_I2C_SLAVE 0x7F 444 #define CONFIG_SYS_I2C_NOPROBES {{0,0x29}}/* Don't probe these addrs */ 445 #define CONFIG_SYS_I2C_OFFSET 0x3000 446 #define CONFIG_SYS_I2C2_OFFSET 0x3100 447 448 /* 449 * I2C2 EEPROM 450 */ 451 #define CONFIG_ID_EEPROM 452 #ifdef CONFIG_ID_EEPROM 453 #define CONFIG_SYS_I2C_EEPROM_NXID 454 #endif 455 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 456 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 457 #define CONFIG_SYS_EEPROM_BUS_NUM 1 458 459 /* 460 * General PCI 461 * Memory space is mapped 1-1, but I/O space must start from 0. 462 */ 463 464 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 465 #define CONFIG_SYS_PCIE3_NAME "ULI" 466 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 467 #ifdef CONFIG_PHYS_64BIT 468 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 469 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 470 #else 471 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 472 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 473 #endif 474 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 475 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 476 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 477 #ifdef CONFIG_PHYS_64BIT 478 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 479 #else 480 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 481 #endif 482 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 483 484 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 485 #define CONFIG_SYS_PCIE2_NAME "Slot 1" 486 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 487 #ifdef CONFIG_PHYS_64BIT 488 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 489 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 490 #else 491 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 492 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 493 #endif 494 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 495 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 496 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 497 #ifdef CONFIG_PHYS_64BIT 498 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 499 #else 500 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 501 #endif 502 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 503 504 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 505 #define CONFIG_SYS_PCIE1_NAME "Slot 2" 506 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 507 #ifdef CONFIG_PHYS_64BIT 508 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 509 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 510 #else 511 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 512 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 513 #endif 514 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 515 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 516 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 517 #ifdef CONFIG_PHYS_64BIT 518 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 519 #else 520 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 521 #endif 522 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 523 524 #if defined(CONFIG_PCI) 525 526 /*PCIE video card used*/ 527 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 528 529 /* video */ 530 #define CONFIG_VIDEO 531 532 #if defined(CONFIG_VIDEO) 533 #define CONFIG_BIOSEMU 534 #define CONFIG_CFB_CONSOLE 535 #define CONFIG_VIDEO_SW_CURSOR 536 #define CONFIG_VGA_AS_SINGLE_DEVICE 537 #define CONFIG_ATI_RADEON_FB 538 #define CONFIG_VIDEO_LOGO 539 /*#define CONFIG_CONSOLE_CURSOR*/ 540 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 541 #endif 542 543 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 544 545 #undef CONFIG_EEPRO100 546 #undef CONFIG_TULIP 547 #undef CONFIG_RTL8139 548 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */ 549 550 #ifndef CONFIG_PCI_PNP 551 #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS 552 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS 553 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 554 #endif 555 556 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 557 #define CONFIG_DOS_PARTITION 558 #define CONFIG_SCSI_AHCI 559 560 #ifdef CONFIG_SCSI_AHCI 561 #define CONFIG_SATA_ULI5288 562 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 563 #define CONFIG_SYS_SCSI_MAX_LUN 1 564 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 565 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 566 #endif /* SCSI */ 567 568 #endif /* CONFIG_PCI */ 569 570 571 #if defined(CONFIG_TSEC_ENET) 572 573 #define CONFIG_MII 1 /* MII PHY management */ 574 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 575 #define CONFIG_TSEC1 1 576 #define CONFIG_TSEC1_NAME "eTSEC1" 577 #define CONFIG_TSEC2 1 578 #define CONFIG_TSEC2_NAME "eTSEC2" 579 #define CONFIG_TSEC3 1 580 #define CONFIG_TSEC3_NAME "eTSEC3" 581 #define CONFIG_TSEC4 1 582 #define CONFIG_TSEC4_NAME "eTSEC4" 583 584 #define CONFIG_PIXIS_SGMII_CMD 585 #define CONFIG_FSL_SGMII_RISER 1 586 #define SGMII_RISER_PHY_OFFSET 0x1c 587 588 #ifdef CONFIG_FSL_SGMII_RISER 589 #define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ 590 #endif 591 592 #define TSEC1_PHY_ADDR 0 593 #define TSEC2_PHY_ADDR 1 594 #define TSEC3_PHY_ADDR 2 595 #define TSEC4_PHY_ADDR 3 596 597 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 598 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 599 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 600 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 601 602 #define TSEC1_PHYIDX 0 603 #define TSEC2_PHYIDX 0 604 #define TSEC3_PHYIDX 0 605 #define TSEC4_PHYIDX 0 606 607 #define CONFIG_ETHPRIME "eTSEC1" 608 609 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 610 #endif /* CONFIG_TSEC_ENET */ 611 612 /* 613 * Environment 614 */ 615 616 #if defined(CONFIG_SYS_RAMBOOT) 617 #if defined(CONFIG_RAMBOOT_NAND) 618 #define CONFIG_ENV_IS_IN_NAND 1 619 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 620 #define CONFIG_ENV_OFFSET ((512 * 1024)\ 621 + CONFIG_SYS_NAND_BLOCK_SIZE) 622 #endif 623 624 #else 625 #define CONFIG_ENV_IS_IN_FLASH 1 626 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 627 #define CONFIG_ENV_ADDR 0xfff80000 628 #else 629 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 630 #endif 631 #define CONFIG_ENV_SIZE 0x2000 632 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 633 #endif 634 635 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 636 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 637 638 /* 639 * Command line configuration. 640 */ 641 #include <config_cmd_default.h> 642 643 #define CONFIG_CMD_ERRATA 644 #define CONFIG_CMD_IRQ 645 #define CONFIG_CMD_PING 646 #define CONFIG_CMD_I2C 647 #define CONFIG_CMD_MII 648 #define CONFIG_CMD_ELF 649 #define CONFIG_CMD_SETEXPR 650 #define CONFIG_CMD_REGINFO 651 652 #if defined(CONFIG_PCI) 653 #define CONFIG_CMD_PCI 654 #define CONFIG_CMD_NET 655 #define CONFIG_CMD_SCSI 656 #define CONFIG_CMD_EXT2 657 #endif 658 659 /* 660 * USB 661 */ 662 #define CONFIG_USB_EHCI 663 664 #ifdef CONFIG_USB_EHCI 665 #define CONFIG_CMD_USB 666 #define CONFIG_USB_EHCI_PCI 667 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 668 #define CONFIG_USB_STORAGE 669 #define CONFIG_PCI_EHCI_DEVICE 0 670 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 671 #endif 672 673 #undef CONFIG_WATCHDOG /* watchdog disabled */ 674 675 /* 676 * Miscellaneous configurable options 677 */ 678 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 679 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 680 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 681 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 682 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 683 #if defined(CONFIG_CMD_KGDB) 684 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 685 #else 686 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 687 #endif 688 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 689 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 690 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 691 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 692 693 /* 694 * For booting Linux, the board info and command line data 695 * have to be in the first 64 MB of memory, since this is 696 * the maximum mapped by the Linux kernel during initialization. 697 */ 698 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 699 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 700 701 #if defined(CONFIG_CMD_KGDB) 702 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 703 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 704 #endif 705 706 /* 707 * Environment Configuration 708 */ 709 710 /* The mac addresses for all ethernet interface */ 711 #if defined(CONFIG_TSEC_ENET) 712 #define CONFIG_HAS_ETH0 713 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 714 #define CONFIG_HAS_ETH1 715 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 716 #define CONFIG_HAS_ETH2 717 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 718 #define CONFIG_HAS_ETH3 719 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 720 #endif 721 722 #define CONFIG_IPADDR 192.168.1.254 723 724 #define CONFIG_HOSTNAME unknown 725 #define CONFIG_ROOTPATH "/opt/nfsroot" 726 #define CONFIG_BOOTFILE "uImage" 727 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 728 729 #define CONFIG_SERVERIP 192.168.1.1 730 #define CONFIG_GATEWAYIP 192.168.1.1 731 #define CONFIG_NETMASK 255.255.255.0 732 733 /* default location for tftp and bootm */ 734 #define CONFIG_LOADADDR 1000000 735 736 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 737 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 738 739 #define CONFIG_BAUDRATE 115200 740 741 #define CONFIG_EXTRA_ENV_SETTINGS \ 742 "hwconfig=fsl_ddr:ctlr_intlv=bank,ecc=off\0" \ 743 "netdev=eth0\0" \ 744 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 745 "tftpflash=tftpboot $loadaddr $uboot; " \ 746 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 747 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 748 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 749 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 750 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 751 "consoledev=ttyS0\0" \ 752 "ramdiskaddr=2000000\0" \ 753 "ramdiskfile=8572ds/ramdisk.uboot\0" \ 754 "fdtaddr=c00000\0" \ 755 "fdtfile=8572ds/mpc8572ds.dtb\0" \ 756 "bdev=sda3\0" 757 758 #define CONFIG_HDBOOT \ 759 "setenv bootargs root=/dev/$bdev rw " \ 760 "console=$consoledev,$baudrate $othbootargs;" \ 761 "tftp $loadaddr $bootfile;" \ 762 "tftp $fdtaddr $fdtfile;" \ 763 "bootm $loadaddr - $fdtaddr" 764 765 #define CONFIG_NFSBOOTCOMMAND \ 766 "setenv bootargs root=/dev/nfs rw " \ 767 "nfsroot=$serverip:$rootpath " \ 768 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 769 "console=$consoledev,$baudrate $othbootargs;" \ 770 "tftp $loadaddr $bootfile;" \ 771 "tftp $fdtaddr $fdtfile;" \ 772 "bootm $loadaddr - $fdtaddr" 773 774 #define CONFIG_RAMBOOTCOMMAND \ 775 "setenv bootargs root=/dev/ram rw " \ 776 "console=$consoledev,$baudrate $othbootargs;" \ 777 "tftp $ramdiskaddr $ramdiskfile;" \ 778 "tftp $loadaddr $bootfile;" \ 779 "tftp $fdtaddr $fdtfile;" \ 780 "bootm $loadaddr $ramdiskaddr $fdtaddr" 781 782 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 783 784 #endif /* __CONFIG_H */ 785