1 /* 2 * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * mpc8572ds board configuration file 9 * 10 */ 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_DISPLAY_BOARDINFO 15 16 #include "../board/freescale/common/ics307_clk.h" 17 18 #ifdef CONFIG_36BIT 19 #define CONFIG_PHYS_64BIT 20 #endif 21 22 #ifndef CONFIG_SYS_TEXT_BASE 23 #define CONFIG_SYS_TEXT_BASE 0xeff40000 24 #endif 25 26 #ifndef CONFIG_RESET_VECTOR_ADDRESS 27 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 28 #endif 29 30 #ifndef CONFIG_SYS_MONITOR_BASE 31 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 32 #endif 33 34 /* High Level Configuration Options */ 35 #define CONFIG_BOOKE 1 /* BOOKE */ 36 #define CONFIG_E500 1 /* BOOKE e500 family */ 37 #define CONFIG_MPC8572 1 38 #define CONFIG_MPC8572DS 1 39 #define CONFIG_MP 1 /* support multiple processors */ 40 41 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ 42 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 43 #define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ 44 #define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ 45 #define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */ 46 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 47 #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ 48 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 49 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 50 51 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 52 53 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 54 #define CONFIG_ENV_OVERWRITE 55 56 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 57 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* ddrclk for MPC85xx */ 58 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 59 60 /* 61 * These can be toggled for performance analysis, otherwise use default. 62 */ 63 #define CONFIG_L2_CACHE /* toggle L2 cache */ 64 #define CONFIG_BTB /* toggle branch predition */ 65 66 #define CONFIG_ENABLE_36BIT_PHYS 1 67 68 #ifdef CONFIG_PHYS_64BIT 69 #define CONFIG_ADDR_MAP 1 70 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 71 #endif 72 73 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ 74 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 75 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 76 77 /* 78 * Config the L2 Cache as L2 SRAM 79 */ 80 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 81 #ifdef CONFIG_PHYS_64BIT 82 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull 83 #else 84 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 85 #endif 86 #define CONFIG_SYS_L2_SIZE (512 << 10) 87 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 88 89 #define CONFIG_SYS_CCSRBAR 0xffe00000 90 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 91 92 #if defined(CONFIG_NAND_SPL) 93 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 94 #endif 95 96 /* DDR Setup */ 97 #define CONFIG_VERY_BIG_RAM 98 #define CONFIG_SYS_FSL_DDR2 99 #undef CONFIG_FSL_DDR_INTERACTIVE 100 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 101 #define CONFIG_DDR_SPD 102 103 #define CONFIG_DDR_ECC 104 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 105 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 106 107 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 108 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 109 110 #define CONFIG_NUM_DDR_CONTROLLERS 2 111 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 112 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 113 114 /* I2C addresses of SPD EEPROMs */ 115 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD EEPROMS locate on I2C bus 1 */ 116 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 117 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ 118 119 /* These are used when DDR doesn't use SPD. */ 120 #define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ 121 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 122 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */ 123 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 124 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 125 #define CONFIG_SYS_DDR_TIMING_1 0x626b2634 126 #define CONFIG_SYS_DDR_TIMING_2 0x062874cf 127 #define CONFIG_SYS_DDR_MODE_1 0x00440462 128 #define CONFIG_SYS_DDR_MODE_2 0x00000000 129 #define CONFIG_SYS_DDR_INTERVAL 0x0c300100 130 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 131 #define CONFIG_SYS_DDR_CLK_CTRL 0x00800000 132 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 133 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 134 #define CONFIG_SYS_DDR_CONTROL 0xc3000008 /* Type = DDR2 */ 135 #define CONFIG_SYS_DDR_CONTROL2 0x24400000 136 137 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 138 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 139 #define CONFIG_SYS_DDR_SBE 0x00010000 140 141 /* 142 * Make sure required options are set 143 */ 144 #ifndef CONFIG_SPD_EEPROM 145 #error ("CONFIG_SPD_EEPROM is required") 146 #endif 147 148 #undef CONFIG_CLOCKS_IN_MHZ 149 150 /* 151 * Memory map 152 * 153 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 154 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 155 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 156 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 157 * 158 * Localbus cacheable (TBD) 159 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 160 * 161 * Localbus non-cacheable 162 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 163 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 164 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 165 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 166 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 167 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 168 */ 169 170 /* 171 * Local Bus Definitions 172 */ 173 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 174 #ifdef CONFIG_PHYS_64BIT 175 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 176 #else 177 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 178 #endif 179 180 #define CONFIG_FLASH_BR_PRELIM \ 181 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) 182 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 183 184 #define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 185 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 186 187 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 188 #define CONFIG_SYS_FLASH_QUIET_TEST 189 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 190 191 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 192 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 193 #undef CONFIG_SYS_FLASH_CHECKSUM 194 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 195 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 196 197 #undef CONFIG_SYS_RAMBOOT 198 199 #define CONFIG_FLASH_CFI_DRIVER 200 #define CONFIG_SYS_FLASH_CFI 201 #define CONFIG_SYS_FLASH_EMPTY_INFO 202 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 203 204 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 205 206 #define CONFIG_HWCONFIG /* enable hwconfig */ 207 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 208 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 209 #ifdef CONFIG_PHYS_64BIT 210 #define PIXIS_BASE_PHYS 0xfffdf0000ull 211 #else 212 #define PIXIS_BASE_PHYS PIXIS_BASE 213 #endif 214 215 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 216 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 217 218 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 219 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 220 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 221 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 222 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 223 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 224 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 225 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 226 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 227 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 228 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 229 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 230 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 231 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 232 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 233 #define PIXIS_VBOOT_LBMAP 0xc0 /* VBOOT - CFG_LBMAP */ 234 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 235 #define PIXIS_VBOOT_LBMAP_PJET 0x01 /* cfg_lbmap - boot from projet */ 236 #define PIXIS_VBOOT_LBMAP_NAND 0x02 /* cfg_lbmap - boot from NAND */ 237 #define PIXIS_VBOOT_LBMAP_NOR1 0x03 /* cfg_lbmap - boot from NOR 1 */ 238 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 239 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 240 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 241 #define PIXIS_VSYSCLK0 0x1C /* VELA SYSCLK0 Register */ 242 #define PIXIS_VSYSCLK1 0x1D /* VELA SYSCLK1 Register */ 243 #define PIXIS_VSYSCLK2 0x1E /* VELA SYSCLK2 Register */ 244 #define PIXIS_VDDRCLK0 0x1F /* VELA DDRCLK0 Register */ 245 #define PIXIS_VDDRCLK1 0x20 /* VELA DDRCLK1 Register */ 246 #define PIXIS_VDDRCLK2 0x21 /* VELA DDRCLK2 Register */ 247 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 248 #define PIXIS_LED 0x25 /* LED Register */ 249 250 #define PIXIS_SPD_SYSCLK_MASK 0x7 /* SYSCLK option */ 251 252 /* old pixis referenced names */ 253 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 254 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 255 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 256 #define PIXIS_VSPEED2_TSEC1SER 0x8 257 #define PIXIS_VSPEED2_TSEC2SER 0x4 258 #define PIXIS_VSPEED2_TSEC3SER 0x2 259 #define PIXIS_VSPEED2_TSEC4SER 0x1 260 #define PIXIS_VCFGEN1_TSEC1SER 0x20 261 #define PIXIS_VCFGEN1_TSEC2SER 0x20 262 #define PIXIS_VCFGEN1_TSEC3SER 0x20 263 #define PIXIS_VCFGEN1_TSEC4SER 0x20 264 #define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \ 265 | PIXIS_VSPEED2_TSEC2SER \ 266 | PIXIS_VSPEED2_TSEC3SER \ 267 | PIXIS_VSPEED2_TSEC4SER) 268 #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \ 269 | PIXIS_VCFGEN1_TSEC2SER \ 270 | PIXIS_VCFGEN1_TSEC3SER \ 271 | PIXIS_VCFGEN1_TSEC4SER) 272 273 #define CONFIG_SYS_INIT_RAM_LOCK 1 274 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 275 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 276 277 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 278 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 279 280 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 281 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 282 283 #ifndef CONFIG_NAND_SPL 284 #define CONFIG_SYS_NAND_BASE 0xffa00000 285 #ifdef CONFIG_PHYS_64BIT 286 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 287 #else 288 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 289 #endif 290 #else 291 #define CONFIG_SYS_NAND_BASE 0xfff00000 292 #ifdef CONFIG_PHYS_64BIT 293 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull 294 #else 295 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 296 #endif 297 #endif 298 299 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 300 CONFIG_SYS_NAND_BASE + 0x40000, \ 301 CONFIG_SYS_NAND_BASE + 0x80000,\ 302 CONFIG_SYS_NAND_BASE + 0xC0000} 303 #define CONFIG_SYS_MAX_NAND_DEVICE 4 304 #define CONFIG_CMD_NAND 1 305 #define CONFIG_NAND_FSL_ELBC 1 306 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 307 #define CONFIG_SYS_NAND_MAX_OOBFREE 5 308 #define CONFIG_SYS_NAND_MAX_ECCPOS 56 309 310 /* NAND boot: 4K NAND loader config */ 311 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 312 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 313 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 314 #define CONFIG_SYS_NAND_U_BOOT_START \ 315 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 316 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 317 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 318 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 319 320 /* NAND flash config */ 321 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 322 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 323 | BR_PS_8 /* Port Size = 8 bit */ \ 324 | BR_MS_FCM /* MSEL = FCM */ \ 325 | BR_V) /* valid */ 326 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 327 | OR_FCM_PGS /* Large Page*/ \ 328 | OR_FCM_CSCT \ 329 | OR_FCM_CST \ 330 | OR_FCM_CHT \ 331 | OR_FCM_SCY_1 \ 332 | OR_FCM_TRLX \ 333 | OR_FCM_EHTR) 334 335 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 336 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 337 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 338 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 339 #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ 340 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 341 | BR_PS_8 /* Port Size = 8 bit */ \ 342 | BR_MS_FCM /* MSEL = FCM */ \ 343 | BR_V) /* valid */ 344 #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 345 #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\ 346 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 347 | BR_PS_8 /* Port Size = 8 bit */ \ 348 | BR_MS_FCM /* MSEL = FCM */ \ 349 | BR_V) /* valid */ 350 #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 351 352 #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\ 353 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 354 | BR_PS_8 /* Port Size = 8 bit */ \ 355 | BR_MS_FCM /* MSEL = FCM */ \ 356 | BR_V) /* valid */ 357 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 358 359 /* Serial Port - controlled on board with jumper J8 360 * open - index 2 361 * shorted - index 1 362 */ 363 #define CONFIG_CONS_INDEX 1 364 #define CONFIG_SYS_NS16550_SERIAL 365 #define CONFIG_SYS_NS16550_REG_SIZE 1 366 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 367 #ifdef CONFIG_NAND_SPL 368 #define CONFIG_NS16550_MIN_FUNCTIONS 369 #endif 370 371 #define CONFIG_SYS_BAUDRATE_TABLE \ 372 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 373 374 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 375 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 376 377 /* I2C */ 378 #define CONFIG_SYS_I2C 379 #define CONFIG_SYS_I2C_FSL 380 #define CONFIG_SYS_FSL_I2C_SPEED 400000 381 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 382 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 383 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 384 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 385 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 386 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 387 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 388 389 /* 390 * I2C2 EEPROM 391 */ 392 #define CONFIG_ID_EEPROM 393 #ifdef CONFIG_ID_EEPROM 394 #define CONFIG_SYS_I2C_EEPROM_NXID 395 #endif 396 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 397 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 398 #define CONFIG_SYS_EEPROM_BUS_NUM 1 399 400 /* 401 * General PCI 402 * Memory space is mapped 1-1, but I/O space must start from 0. 403 */ 404 405 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 406 #define CONFIG_SYS_PCIE3_NAME "ULI" 407 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 408 #ifdef CONFIG_PHYS_64BIT 409 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 410 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 411 #else 412 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 413 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 414 #endif 415 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 416 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 417 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 418 #ifdef CONFIG_PHYS_64BIT 419 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 420 #else 421 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 422 #endif 423 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 424 425 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 426 #define CONFIG_SYS_PCIE2_NAME "Slot 1" 427 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 428 #ifdef CONFIG_PHYS_64BIT 429 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 430 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 431 #else 432 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 433 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 434 #endif 435 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 436 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 437 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 438 #ifdef CONFIG_PHYS_64BIT 439 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 440 #else 441 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 442 #endif 443 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 444 445 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 446 #define CONFIG_SYS_PCIE1_NAME "Slot 2" 447 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 448 #ifdef CONFIG_PHYS_64BIT 449 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 450 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 451 #else 452 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 453 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 454 #endif 455 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 456 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 457 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 458 #ifdef CONFIG_PHYS_64BIT 459 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 460 #else 461 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 462 #endif 463 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 464 465 #if defined(CONFIG_PCI) 466 467 /*PCIE video card used*/ 468 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 469 470 /* video */ 471 #define CONFIG_VIDEO 472 473 #if defined(CONFIG_VIDEO) 474 #define CONFIG_BIOSEMU 475 #define CONFIG_CFB_CONSOLE 476 #define CONFIG_VIDEO_SW_CURSOR 477 #define CONFIG_VGA_AS_SINGLE_DEVICE 478 #define CONFIG_ATI_RADEON_FB 479 #define CONFIG_VIDEO_LOGO 480 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 481 #endif 482 483 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 484 485 #undef CONFIG_EEPRO100 486 #undef CONFIG_TULIP 487 488 #ifndef CONFIG_PCI_PNP 489 #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS 490 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS 491 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 492 #endif 493 494 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 495 #define CONFIG_DOS_PARTITION 496 #define CONFIG_SCSI_AHCI 497 498 #ifdef CONFIG_SCSI_AHCI 499 #define CONFIG_LIBATA 500 #define CONFIG_SATA_ULI5288 501 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 502 #define CONFIG_SYS_SCSI_MAX_LUN 1 503 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 504 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 505 #endif /* SCSI */ 506 507 #endif /* CONFIG_PCI */ 508 509 #if defined(CONFIG_TSEC_ENET) 510 511 #define CONFIG_MII 1 /* MII PHY management */ 512 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 513 #define CONFIG_TSEC1 1 514 #define CONFIG_TSEC1_NAME "eTSEC1" 515 #define CONFIG_TSEC2 1 516 #define CONFIG_TSEC2_NAME "eTSEC2" 517 #define CONFIG_TSEC3 1 518 #define CONFIG_TSEC3_NAME "eTSEC3" 519 #define CONFIG_TSEC4 1 520 #define CONFIG_TSEC4_NAME "eTSEC4" 521 522 #define CONFIG_PIXIS_SGMII_CMD 523 #define CONFIG_FSL_SGMII_RISER 1 524 #define SGMII_RISER_PHY_OFFSET 0x1c 525 526 #ifdef CONFIG_FSL_SGMII_RISER 527 #define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ 528 #endif 529 530 #define TSEC1_PHY_ADDR 0 531 #define TSEC2_PHY_ADDR 1 532 #define TSEC3_PHY_ADDR 2 533 #define TSEC4_PHY_ADDR 3 534 535 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 536 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 537 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 538 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 539 540 #define TSEC1_PHYIDX 0 541 #define TSEC2_PHYIDX 0 542 #define TSEC3_PHYIDX 0 543 #define TSEC4_PHYIDX 0 544 545 #define CONFIG_ETHPRIME "eTSEC1" 546 547 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 548 #endif /* CONFIG_TSEC_ENET */ 549 550 /* 551 * Environment 552 */ 553 554 #if defined(CONFIG_SYS_RAMBOOT) 555 556 #else 557 #define CONFIG_ENV_IS_IN_FLASH 1 558 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 559 #define CONFIG_ENV_ADDR 0xfff80000 560 #else 561 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 562 #endif 563 #define CONFIG_ENV_SIZE 0x2000 564 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 565 #endif 566 567 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 568 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 569 570 /* 571 * Command line configuration. 572 */ 573 #define CONFIG_CMD_ERRATA 574 #define CONFIG_CMD_IRQ 575 #define CONFIG_CMD_REGINFO 576 577 #if defined(CONFIG_PCI) 578 #define CONFIG_CMD_PCI 579 #define CONFIG_SCSI 580 #endif 581 582 /* 583 * USB 584 */ 585 #define CONFIG_USB_EHCI 586 587 #ifdef CONFIG_USB_EHCI 588 #define CONFIG_USB_EHCI_PCI 589 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 590 #define CONFIG_USB_STORAGE 591 #define CONFIG_PCI_EHCI_DEVICE 0 592 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 593 #endif 594 595 #undef CONFIG_WATCHDOG /* watchdog disabled */ 596 597 /* 598 * Miscellaneous configurable options 599 */ 600 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 601 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 602 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 603 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 604 #if defined(CONFIG_CMD_KGDB) 605 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 606 #else 607 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 608 #endif 609 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 610 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 611 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 612 613 /* 614 * For booting Linux, the board info and command line data 615 * have to be in the first 64 MB of memory, since this is 616 * the maximum mapped by the Linux kernel during initialization. 617 */ 618 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 619 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 620 621 #if defined(CONFIG_CMD_KGDB) 622 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 623 #endif 624 625 /* 626 * Environment Configuration 627 */ 628 #if defined(CONFIG_TSEC_ENET) 629 #define CONFIG_HAS_ETH0 630 #define CONFIG_HAS_ETH1 631 #define CONFIG_HAS_ETH2 632 #define CONFIG_HAS_ETH3 633 #endif 634 635 #define CONFIG_IPADDR 192.168.1.254 636 637 #define CONFIG_HOSTNAME unknown 638 #define CONFIG_ROOTPATH "/opt/nfsroot" 639 #define CONFIG_BOOTFILE "uImage" 640 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 641 642 #define CONFIG_SERVERIP 192.168.1.1 643 #define CONFIG_GATEWAYIP 192.168.1.1 644 #define CONFIG_NETMASK 255.255.255.0 645 646 /* default location for tftp and bootm */ 647 #define CONFIG_LOADADDR 1000000 648 649 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 650 651 #define CONFIG_BAUDRATE 115200 652 653 #define CONFIG_EXTRA_ENV_SETTINGS \ 654 "hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0" \ 655 "netdev=eth0\0" \ 656 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 657 "tftpflash=tftpboot $loadaddr $uboot; " \ 658 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 659 " +$filesize; " \ 660 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 661 " +$filesize; " \ 662 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 663 " $filesize; " \ 664 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 665 " +$filesize; " \ 666 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 667 " $filesize\0" \ 668 "consoledev=ttyS0\0" \ 669 "ramdiskaddr=2000000\0" \ 670 "ramdiskfile=8572ds/ramdisk.uboot\0" \ 671 "fdtaddr=1e00000\0" \ 672 "fdtfile=8572ds/mpc8572ds.dtb\0" \ 673 "bdev=sda3\0" 674 675 #define CONFIG_HDBOOT \ 676 "setenv bootargs root=/dev/$bdev rw " \ 677 "console=$consoledev,$baudrate $othbootargs;" \ 678 "tftp $loadaddr $bootfile;" \ 679 "tftp $fdtaddr $fdtfile;" \ 680 "bootm $loadaddr - $fdtaddr" 681 682 #define CONFIG_NFSBOOTCOMMAND \ 683 "setenv bootargs root=/dev/nfs rw " \ 684 "nfsroot=$serverip:$rootpath " \ 685 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 686 "console=$consoledev,$baudrate $othbootargs;" \ 687 "tftp $loadaddr $bootfile;" \ 688 "tftp $fdtaddr $fdtfile;" \ 689 "bootm $loadaddr - $fdtaddr" 690 691 #define CONFIG_RAMBOOTCOMMAND \ 692 "setenv bootargs root=/dev/ram rw " \ 693 "console=$consoledev,$baudrate $othbootargs;" \ 694 "tftp $ramdiskaddr $ramdiskfile;" \ 695 "tftp $loadaddr $bootfile;" \ 696 "tftp $fdtaddr $fdtfile;" \ 697 "bootm $loadaddr $ramdiskaddr $fdtaddr" 698 699 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 700 701 #endif /* __CONFIG_H */ 702