1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * mpc8569mds board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 /* High Level Configuration Options */ 14 #define CONFIG_BOOKE 1 /* BOOKE */ 15 #define CONFIG_E500 1 /* BOOKE e500 family */ 16 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ 17 #define CONFIG_MPC8569 1 /* MPC8569 specific */ 18 #define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */ 19 20 #define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */ 21 22 #define CONFIG_SYS_SRIO 23 #define CONFIG_SRIO1 /* SRIO port 1 */ 24 25 #define CONFIG_PCI 1 /* Disable PCI/PCIE */ 26 #define CONFIG_PCIE1 1 /* PCIE controller */ 27 #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ 28 #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ 29 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 30 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 31 #define CONFIG_QE /* Enable QE */ 32 #define CONFIG_ENV_OVERWRITE 33 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 34 35 #ifndef __ASSEMBLY__ 36 extern unsigned long get_clock_freq(void); 37 #endif 38 /* Replace a call to get_clock_freq (after it is implemented)*/ 39 #define CONFIG_SYS_CLK_FREQ 66666666 40 #define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ 41 42 #ifdef CONFIG_ATM 43 #define CONFIG_PQ_MDS_PIB 44 #define CONFIG_PQ_MDS_PIB_ATM 45 #endif 46 47 /* 48 * These can be toggled for performance analysis, otherwise use default. 49 */ 50 #define CONFIG_L2_CACHE /* toggle L2 cache */ 51 #define CONFIG_BTB /* toggle branch predition */ 52 53 #ifdef CONFIG_NAND 54 #define CONFIG_NAND_U_BOOT 1 55 #define CONFIG_RAMBOOT_NAND 1 56 #ifdef CONFIG_NAND_SPL 57 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 58 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ 59 #else 60 #define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds 61 #define CONFIG_SYS_TEXT_BASE 0xf8f82000 62 #endif 63 #endif 64 65 #ifndef CONFIG_SYS_TEXT_BASE 66 #define CONFIG_SYS_TEXT_BASE 0xfff80000 67 #endif 68 69 #ifndef CONFIG_SYS_MONITOR_BASE 70 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 71 #endif 72 73 /* 74 * Only possible on E500 Version 2 or newer cores. 75 */ 76 #define CONFIG_ENABLE_36BIT_PHYS 1 77 78 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 79 #define CONFIG_BOARD_EARLY_INIT_R 1 80 #define CONFIG_HWCONFIG 81 82 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 83 #define CONFIG_SYS_MEMTEST_END 0x00400000 84 85 /* 86 * Config the L2 Cache as L2 SRAM 87 */ 88 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 89 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 90 #define CONFIG_SYS_L2_SIZE (512 << 10) 91 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 92 93 #define CONFIG_SYS_CCSRBAR 0xe0000000 94 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 95 96 #if defined(CONFIG_NAND_SPL) 97 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 98 #endif 99 100 /* DDR Setup */ 101 #define CONFIG_SYS_FSL_DDR3 102 #undef CONFIG_FSL_DDR_INTERACTIVE 103 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ 104 #define CONFIG_DDR_SPD 105 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 106 107 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 108 109 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 110 /* DDR is system memory*/ 111 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 112 113 #define CONFIG_NUM_DDR_CONTROLLERS 1 114 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 115 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 116 117 /* I2C addresses of SPD EEPROMs */ 118 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 119 120 /* These are used when DDR doesn't use SPD. */ 121 #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ 122 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 123 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 124 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 125 #define CONFIG_SYS_DDR_TIMING_0 0x00330004 126 #define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644 127 #define CONFIG_SYS_DDR_TIMING_2 0x002888D0 128 #define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000 129 #define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040 130 #define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521 131 #define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000 132 #define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000 133 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 134 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000 135 #define CONFIG_SYS_DDR_TIMING_4 0x00220001 136 #define CONFIG_SYS_DDR_TIMING_5 0x03402400 137 #define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 138 #define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604 139 #define CONFIG_SYS_DDR_CDR_1 0x80040000 140 #define CONFIG_SYS_DDR_CDR_2 0x00000000 141 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 142 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 143 #define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */ 144 #define CONFIG_SYS_DDR_CONTROL2 0x24400000 145 146 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 147 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 148 #define CONFIG_SYS_DDR_SBE 0x00010000 149 150 #undef CONFIG_CLOCKS_IN_MHZ 151 152 /* 153 * Local Bus Definitions 154 */ 155 156 #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ 157 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 158 159 #define CONFIG_SYS_BCSR_BASE 0xf8000000 160 #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE 161 162 /*Chip select 0 - Flash*/ 163 #define CONFIG_FLASH_BR_PRELIM 0xfe000801 164 #define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 165 166 /*Chip select 1 - BCSR*/ 167 #define CONFIG_SYS_BR1_PRELIM 0xf8000801 168 #define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 169 170 /*Chip select 4 - PIB*/ 171 #define CONFIG_SYS_BR4_PRELIM 0xf8008801 172 #define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 173 174 /*Chip select 5 - PIB*/ 175 #define CONFIG_SYS_BR5_PRELIM 0xf8010801 176 #define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 177 178 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 179 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ 180 #undef CONFIG_SYS_FLASH_CHECKSUM 181 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 182 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 183 184 #if defined(CONFIG_RAMBOOT_NAND) 185 #define CONFIG_SYS_RAMBOOT 186 #define CONFIG_SYS_EXTRA_ENV_RELOC 187 #else 188 #undef CONFIG_SYS_RAMBOOT 189 #endif 190 191 #define CONFIG_FLASH_CFI_DRIVER 192 #define CONFIG_SYS_FLASH_CFI 193 #define CONFIG_SYS_FLASH_EMPTY_INFO 194 195 /* Chip select 3 - NAND */ 196 #ifndef CONFIG_NAND_SPL 197 #define CONFIG_SYS_NAND_BASE 0xFC000000 198 #else 199 #define CONFIG_SYS_NAND_BASE 0xFFF00000 200 #endif 201 202 /* NAND boot: 4K NAND loader config */ 203 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 204 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 205 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 206 #define CONFIG_SYS_NAND_U_BOOT_START \ 207 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 208 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 209 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 210 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 211 212 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 213 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } 214 #define CONFIG_SYS_MAX_NAND_DEVICE 1 215 #define CONFIG_MTD_NAND_VERIFY_WRITE 1 216 #define CONFIG_CMD_NAND 1 217 #define CONFIG_NAND_FSL_ELBC 1 218 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 219 #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ 220 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 221 | BR_PS_8 /* Port Size = 8 bit */ \ 222 | BR_MS_FCM /* MSEL = FCM */ \ 223 | BR_V) /* valid */ 224 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 225 | OR_FCM_CSCT \ 226 | OR_FCM_CST \ 227 | OR_FCM_CHT \ 228 | OR_FCM_SCY_1 \ 229 | OR_FCM_TRLX \ 230 | OR_FCM_EHTR) 231 232 #ifdef CONFIG_RAMBOOT_NAND 233 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 234 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */ 235 #define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 236 #define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 237 #else 238 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 239 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 240 #define CONFIG_SYS_BR3_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 241 #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 242 #endif 243 244 #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ 245 #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ 246 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ 247 #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ 248 249 #define CONFIG_SYS_INIT_RAM_LOCK 1 250 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ 251 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ 252 253 #define CONFIG_SYS_GBL_DATA_OFFSET \ 254 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 255 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 256 257 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 258 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 259 260 /* Serial Port */ 261 #define CONFIG_CONS_INDEX 1 262 #define CONFIG_SYS_NS16550 263 #define CONFIG_SYS_NS16550_SERIAL 264 #define CONFIG_SYS_NS16550_REG_SIZE 1 265 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 266 #ifdef CONFIG_NAND_SPL 267 #define CONFIG_NS16550_MIN_FUNCTIONS 268 #endif 269 270 #define CONFIG_SYS_BAUDRATE_TABLE \ 271 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 272 273 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 274 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 275 276 /* Use the HUSH parser*/ 277 #define CONFIG_SYS_HUSH_PARSER 278 #ifdef CONFIG_SYS_HUSH_PARSER 279 #endif 280 281 /* pass open firmware flat tree */ 282 #define CONFIG_OF_LIBFDT 1 283 #define CONFIG_OF_BOARD_SETUP 1 284 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 285 286 /* 287 * I2C 288 */ 289 #define CONFIG_SYS_I2C 290 #define CONFIG_SYS_I2C_FSL 291 #define CONFIG_SYS_FSL_I2C_SPEED 400000 292 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 293 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 294 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 295 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 296 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 297 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } 298 299 /* 300 * I2C2 EEPROM 301 */ 302 #define CONFIG_ID_EEPROM 303 #ifdef CONFIG_ID_EEPROM 304 #define CONFIG_SYS_I2C_EEPROM_NXID 305 #endif 306 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 307 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 308 #define CONFIG_SYS_EEPROM_BUS_NUM 1 309 310 #define PLPPAR1_I2C_BIT_MASK 0x0000000F 311 #define PLPPAR1_I2C2_VAL 0x00000000 312 #define PLPPAR1_ESDHC_VAL 0x0000000A 313 #define PLPDIR1_I2C_BIT_MASK 0x0000000F 314 #define PLPDIR1_I2C2_VAL 0x0000000F 315 #define PLPDIR1_ESDHC_VAL 0x00000006 316 #define PLPPAR1_UART0_BIT_MASK 0x00000fc0 317 #define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80 318 #define PLPDIR1_UART0_BIT_MASK 0x00000fc0 319 #define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80 320 321 /* 322 * General PCI 323 * Memory Addresses are mapped 1-1. I/O is mapped from 0 324 */ 325 #define CONFIG_SYS_PCIE1_NAME "Slot" 326 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 327 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 328 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 329 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 330 #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 331 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 332 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 333 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ 334 335 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 336 #define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 337 #define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS 338 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ 339 340 #ifdef CONFIG_QE 341 /* 342 * QE UEC ethernet configuration 343 */ 344 #define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */ 345 #undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */ 346 347 #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) 348 #define CONFIG_UEC_ETH 349 #define CONFIG_ETHPRIME "UEC0" 350 #define CONFIG_PHY_MODE_NEED_CHANGE 351 352 #define CONFIG_UEC_ETH1 /* GETH1 */ 353 #define CONFIG_HAS_ETH0 354 355 #ifdef CONFIG_UEC_ETH1 356 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ 357 #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE 358 #if defined(CONFIG_SYS_UCC_RGMII_MODE) 359 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 360 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH 361 #define CONFIG_SYS_UEC1_PHY_ADDR 7 362 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID 363 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 364 #elif defined(CONFIG_SYS_UCC_RMII_MODE) 365 #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */ 366 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH 367 #define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */ 368 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 369 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 370 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ 371 #endif /* CONFIG_UEC_ETH1 */ 372 373 #define CONFIG_UEC_ETH2 /* GETH2 */ 374 #define CONFIG_HAS_ETH1 375 376 #ifdef CONFIG_UEC_ETH2 377 #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ 378 #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE 379 #if defined(CONFIG_SYS_UCC_RGMII_MODE) 380 #define CONFIG_SYS_UEC2_TX_CLK QE_CLK17 381 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH 382 #define CONFIG_SYS_UEC2_PHY_ADDR 1 383 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID 384 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 385 #elif defined(CONFIG_SYS_UCC_RMII_MODE) 386 #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */ 387 #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH 388 #define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */ 389 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 390 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 391 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ 392 #endif /* CONFIG_UEC_ETH2 */ 393 394 #define CONFIG_UEC_ETH3 /* GETH3 */ 395 #define CONFIG_HAS_ETH2 396 397 #ifdef CONFIG_UEC_ETH3 398 #define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */ 399 #define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE 400 #if defined(CONFIG_SYS_UCC_RGMII_MODE) 401 #define CONFIG_SYS_UEC3_TX_CLK QE_CLK12 402 #define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH 403 #define CONFIG_SYS_UEC3_PHY_ADDR 2 404 #define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID 405 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000 406 #elif defined(CONFIG_SYS_UCC_RMII_MODE) 407 #define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */ 408 #define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH 409 #define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */ 410 #define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 411 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100 412 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ 413 #endif /* CONFIG_UEC_ETH3 */ 414 415 #define CONFIG_UEC_ETH4 /* GETH4 */ 416 #define CONFIG_HAS_ETH3 417 418 #ifdef CONFIG_UEC_ETH4 419 #define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */ 420 #define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE 421 #if defined(CONFIG_SYS_UCC_RGMII_MODE) 422 #define CONFIG_SYS_UEC4_TX_CLK QE_CLK17 423 #define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH 424 #define CONFIG_SYS_UEC4_PHY_ADDR 3 425 #define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID 426 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000 427 #elif defined(CONFIG_SYS_UCC_RMII_MODE) 428 #define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */ 429 #define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH 430 #define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */ 431 #define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII 432 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100 433 #endif /* CONFIG_SYS_UCC_RGMII_MODE */ 434 #endif /* CONFIG_UEC_ETH4 */ 435 436 #undef CONFIG_UEC_ETH6 /* GETH6 */ 437 #define CONFIG_HAS_ETH5 438 439 #ifdef CONFIG_UEC_ETH6 440 #define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */ 441 #define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE 442 #define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE 443 #define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH 444 #define CONFIG_SYS_UEC6_PHY_ADDR 4 445 #define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII 446 #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000 447 #endif /* CONFIG_UEC_ETH6 */ 448 449 #undef CONFIG_UEC_ETH8 /* GETH8 */ 450 #define CONFIG_HAS_ETH7 451 452 #ifdef CONFIG_UEC_ETH8 453 #define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */ 454 #define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE 455 #define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE 456 #define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH 457 #define CONFIG_SYS_UEC8_PHY_ADDR 6 458 #define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII 459 #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000 460 #endif /* CONFIG_UEC_ETH8 */ 461 462 #endif /* CONFIG_QE */ 463 464 #if defined(CONFIG_PCI) 465 466 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 467 468 #undef CONFIG_EEPRO100 469 #undef CONFIG_TULIP 470 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */ 471 472 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 473 474 #endif /* CONFIG_PCI */ 475 476 /* 477 * Environment 478 */ 479 #if defined(CONFIG_SYS_RAMBOOT) 480 #if defined(CONFIG_RAMBOOT_NAND) 481 #define CONFIG_ENV_IS_IN_NAND 1 482 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 483 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 484 #endif 485 #else 486 #define CONFIG_ENV_IS_IN_FLASH 1 487 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 488 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 489 #define CONFIG_ENV_SIZE 0x2000 490 #endif 491 492 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 493 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 494 495 /* QE microcode/firmware address */ 496 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 497 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xfff00000 498 499 /* 500 * BOOTP options 501 */ 502 #define CONFIG_BOOTP_BOOTFILESIZE 503 #define CONFIG_BOOTP_BOOTPATH 504 #define CONFIG_BOOTP_GATEWAY 505 #define CONFIG_BOOTP_HOSTNAME 506 507 508 /* 509 * Command line configuration. 510 */ 511 #include <config_cmd_default.h> 512 513 #define CONFIG_CMD_PING 514 #define CONFIG_CMD_I2C 515 #define CONFIG_CMD_MII 516 #define CONFIG_CMD_ELF 517 #define CONFIG_CMD_IRQ 518 #define CONFIG_CMD_SETEXPR 519 #define CONFIG_CMD_REGINFO 520 521 #if defined(CONFIG_PCI) 522 #define CONFIG_CMD_PCI 523 #endif 524 525 526 #undef CONFIG_WATCHDOG /* watchdog disabled */ 527 528 #define CONFIG_MMC 1 529 530 #ifdef CONFIG_MMC 531 #define CONFIG_FSL_ESDHC 532 #define CONFIG_FSL_ESDHC_PIN_MUX 533 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 534 #define CONFIG_CMD_MMC 535 #define CONFIG_GENERIC_MMC 536 #define CONFIG_CMD_EXT2 537 #define CONFIG_CMD_FAT 538 #define CONFIG_DOS_PARTITION 539 #endif 540 541 /* 542 * Miscellaneous configurable options 543 */ 544 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 545 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 546 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 547 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 548 #if defined(CONFIG_CMD_KGDB) 549 #define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ 550 #else 551 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 552 #endif 553 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 554 /* Print Buffer Size */ 555 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 556 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 557 /* Boot Argument Buffer Size */ 558 559 /* 560 * For booting Linux, the board info and command line data 561 * have to be in the first 64 MB of memory, since this is 562 * the maximum mapped by the Linux kernel during initialization. 563 */ 564 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 565 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 566 567 #if defined(CONFIG_CMD_KGDB) 568 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 569 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 570 #endif 571 572 /* 573 * Environment Configuration 574 */ 575 #define CONFIG_HOSTNAME mpc8569mds 576 #define CONFIG_ROOTPATH "/nfsroot" 577 #define CONFIG_BOOTFILE "your.uImage" 578 579 #define CONFIG_SERVERIP 192.168.1.1 580 #define CONFIG_GATEWAYIP 192.168.1.1 581 #define CONFIG_NETMASK 255.255.255.0 582 583 #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ 584 585 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 586 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 587 588 #define CONFIG_BAUDRATE 115200 589 590 #define CONFIG_EXTRA_ENV_SETTINGS \ 591 "netdev=eth0\0" \ 592 "consoledev=ttyS0\0" \ 593 "ramdiskaddr=600000\0" \ 594 "ramdiskfile=your.ramdisk.u-boot\0" \ 595 "fdtaddr=400000\0" \ 596 "fdtfile=your.fdt.dtb\0" \ 597 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 598 "nfsroot=$serverip:$rootpath " \ 599 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 600 "console=$consoledev,$baudrate $othbootargs\0" \ 601 "ramargs=setenv bootargs root=/dev/ram rw " \ 602 "console=$consoledev,$baudrate $othbootargs\0" \ 603 604 #define CONFIG_NFSBOOTCOMMAND \ 605 "run nfsargs;" \ 606 "tftp $loadaddr $bootfile;" \ 607 "tftp $fdtaddr $fdtfile;" \ 608 "bootm $loadaddr - $fdtaddr" 609 610 #define CONFIG_RAMBOOTCOMMAND \ 611 "run ramargs;" \ 612 "tftp $ramdiskaddr $ramdiskfile;" \ 613 "tftp $loadaddr $bootfile;" \ 614 "bootm $loadaddr $ramdiskaddr" 615 616 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 617 618 #endif /* __CONFIG_H */ 619