1 /* 2 * Copyright 2004 Freescale Semiconductor. 3 * (C) Copyright 2002,2003 Motorola,Inc. 4 * Xianghua Xiao <X.Xiao@motorola.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * mpc8560ads board configuration file 27 * 28 * Please refer to doc/README.mpc85xx for more info. 29 * 30 * Make sure you change the MAC address and other network params first, 31 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. 32 */ 33 34 #ifndef __CONFIG_H 35 #define __CONFIG_H 36 37 /* High Level Configuration Options */ 38 #define CONFIG_BOOKE 1 /* BOOKE */ 39 #define CONFIG_E500 1 /* BOOKE e500 family */ 40 #define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ 41 #define CONFIG_CPM2 1 /* has CPM2 */ 42 #define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ 43 #define CONFIG_MPC8560 1 44 45 #define CONFIG_PCI 46 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 47 #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ 48 #define CONFIG_ENV_OVERWRITE 49 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 50 51 /* 52 * sysclk for MPC85xx 53 * 54 * Two valid values are: 55 * 33000000 56 * 66000000 57 * 58 * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz 59 * is likely the desired value here, so that is now the default. 60 * The board, however, can run at 66MHz. In any event, this value 61 * must match the settings of some switches. Details can be found 62 * in the README.mpc85xxads. 63 */ 64 65 #ifndef CONFIG_SYS_CLK_FREQ 66 #define CONFIG_SYS_CLK_FREQ 33000000 67 #endif 68 69 70 /* 71 * These can be toggled for performance analysis, otherwise use default. 72 */ 73 #define CONFIG_L2_CACHE /* toggle L2 cache */ 74 #define CONFIG_BTB /* toggle branch predition */ 75 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 76 77 #define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ 78 79 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ 80 #define CONFIG_SYS_MEMTEST_END 0x00400000 81 82 83 /* 84 * Base addresses -- Note these are effective addresses where the 85 * actual resources get mapped (not physical addresses) 86 */ 87 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 88 #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ 89 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ 90 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 91 92 /* DDR Setup */ 93 #define CONFIG_FSL_DDR1 94 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ 95 #define CONFIG_DDR_SPD 96 #undef CONFIG_FSL_DDR_INTERACTIVE 97 98 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 99 100 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 101 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 102 103 #define CONFIG_NUM_DDR_CONTROLLERS 1 104 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 105 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 106 107 /* I2C addresses of SPD EEPROMs */ 108 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 109 110 /* These are used when DDR doesn't use SPD. */ 111 #define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */ 112 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */ 113 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002 114 #define CONFIG_SYS_DDR_TIMING_1 0x37344321 115 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ 116 #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ 117 #define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ 118 #define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */ 119 120 /* 121 * SDRAM on the Local Bus 122 */ 123 #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ 124 #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ 125 126 #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ 127 #define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */ 128 129 #define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ 130 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 131 #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ 132 #undef CONFIG_SYS_FLASH_CHECKSUM 133 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 134 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 135 136 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 137 138 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 139 #define CONFIG_SYS_RAMBOOT 140 #else 141 #undef CONFIG_SYS_RAMBOOT 142 #endif 143 144 #define CONFIG_FLASH_CFI_DRIVER 145 #define CONFIG_SYS_FLASH_CFI 146 #define CONFIG_SYS_FLASH_EMPTY_INFO 147 148 #undef CONFIG_CLOCKS_IN_MHZ 149 150 151 /* 152 * Local Bus Definitions 153 */ 154 155 /* 156 * Base Register 2 and Option Register 2 configure SDRAM. 157 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 158 * 159 * For BR2, need: 160 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 161 * port-size = 32-bits = BR2[19:20] = 11 162 * no parity checking = BR2[21:22] = 00 163 * SDRAM for MSEL = BR2[24:26] = 011 164 * Valid = BR[31] = 1 165 * 166 * 0 4 8 12 16 20 24 28 167 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 168 * 169 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into 170 * FIXME: the top 17 bits of BR2. 171 */ 172 173 #define CONFIG_SYS_BR2_PRELIM 0xf0001861 174 175 /* 176 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 177 * 178 * For OR2, need: 179 * 64MB mask for AM, OR2[0:7] = 1111 1100 180 * XAM, OR2[17:18] = 11 181 * 9 columns OR2[19-21] = 010 182 * 13 rows OR2[23-25] = 100 183 * EAD set for extra time OR[31] = 1 184 * 185 * 0 4 8 12 16 20 24 28 186 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 187 */ 188 189 #define CONFIG_SYS_OR2_PRELIM 0xfc006901 190 191 #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ 192 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ 193 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ 194 #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ 195 196 /* 197 * LSDMR masks 198 */ 199 #define CONFIG_SYS_LBC_LSDMR_RFEN (1 << (31 - 1)) 200 #define CONFIG_SYS_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) 201 #define CONFIG_SYS_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) 202 #define CONFIG_SYS_LBC_LSDMR_RFCR5 (3 << (31 - 16)) 203 #define CONFIG_SYS_LBC_LSDMR_RFCR16 (7 << (31 - 16)) 204 #define CONFIG_SYS_LBC_LSDMR_PRETOACT3 (3 << (31 - 19)) 205 #define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) 206 #define CONFIG_SYS_LBC_LSDMR_ACTTORW3 (3 << (31 - 22)) 207 #define CONFIG_SYS_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) 208 #define CONFIG_SYS_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) 209 #define CONFIG_SYS_LBC_LSDMR_BL8 (1 << (31 - 23)) 210 #define CONFIG_SYS_LBC_LSDMR_WRC2 (2 << (31 - 27)) 211 #define CONFIG_SYS_LBC_LSDMR_WRC4 (0 << (31 - 27)) 212 #define CONFIG_SYS_LBC_LSDMR_BUFCMD (1 << (31 - 29)) 213 #define CONFIG_SYS_LBC_LSDMR_CL3 (3 << (31 - 31)) 214 215 #define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) 216 #define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) 217 #define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) 218 #define CONFIG_SYS_LBC_LSDMR_OP_MRW (3 << (31 - 4)) 219 #define CONFIG_SYS_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) 220 #define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) 221 #define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) 222 #define CONFIG_SYS_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) 223 224 #define CONFIG_SYS_LBC_LSDMR_COMMON ( CONFIG_SYS_LBC_LSDMR_BSMA1516 \ 225 | CONFIG_SYS_LBC_LSDMR_RFCR5 \ 226 | CONFIG_SYS_LBC_LSDMR_PRETOACT3 \ 227 | CONFIG_SYS_LBC_LSDMR_ACTTORW3 \ 228 | CONFIG_SYS_LBC_LSDMR_BL8 \ 229 | CONFIG_SYS_LBC_LSDMR_WRC2 \ 230 | CONFIG_SYS_LBC_LSDMR_CL3 \ 231 | CONFIG_SYS_LBC_LSDMR_RFEN \ 232 ) 233 234 /* 235 * SDRAM Controller configuration sequence. 236 */ 237 #define CONFIG_SYS_LBC_LSDMR_1 ( CONFIG_SYS_LBC_LSDMR_COMMON \ 238 | CONFIG_SYS_LBC_LSDMR_OP_PCHALL) 239 #define CONFIG_SYS_LBC_LSDMR_2 ( CONFIG_SYS_LBC_LSDMR_COMMON \ 240 | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH) 241 #define CONFIG_SYS_LBC_LSDMR_3 ( CONFIG_SYS_LBC_LSDMR_COMMON \ 242 | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH) 243 #define CONFIG_SYS_LBC_LSDMR_4 ( CONFIG_SYS_LBC_LSDMR_COMMON \ 244 | CONFIG_SYS_LBC_LSDMR_OP_MRW) 245 #define CONFIG_SYS_LBC_LSDMR_5 ( CONFIG_SYS_LBC_LSDMR_COMMON \ 246 | CONFIG_SYS_LBC_LSDMR_OP_NORMAL) 247 248 249 /* 250 * 32KB, 8-bit wide for ADS config reg 251 */ 252 #define CONFIG_SYS_BR4_PRELIM 0xf8000801 253 #define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 254 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) 255 256 #define CONFIG_L1_INIT_RAM 257 #define CONFIG_SYS_INIT_RAM_LOCK 1 258 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ 259 #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ 260 261 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 262 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 263 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 264 265 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 266 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 267 268 /* Serial Port */ 269 #define CONFIG_CONS_ON_SCC /* define if console on SCC */ 270 #undef CONFIG_CONS_NONE /* define if console on something else */ 271 #define CONFIG_CONS_INDEX 1 /* which serial channel for console */ 272 273 #define CONFIG_BAUDRATE 115200 274 275 #define CONFIG_SYS_BAUDRATE_TABLE \ 276 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 277 278 /* Use the HUSH parser */ 279 #define CONFIG_SYS_HUSH_PARSER 280 #ifdef CONFIG_SYS_HUSH_PARSER 281 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 282 #endif 283 284 /* pass open firmware flat tree */ 285 #define CONFIG_OF_LIBFDT 1 286 #define CONFIG_OF_BOARD_SETUP 1 287 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 288 289 #define CONFIG_SYS_64BIT_VSPRINTF 1 290 #define CONFIG_SYS_64BIT_STRTOUL 1 291 292 /* 293 * I2C 294 */ 295 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 296 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 297 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 298 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 299 #define CONFIG_SYS_I2C_SLAVE 0x7F 300 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 301 #define CONFIG_SYS_I2C_OFFSET 0x3000 302 303 /* RapidIO MMU */ 304 #define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ 305 #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE 306 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ 307 308 /* 309 * General PCI 310 * Memory space is mapped 1-1, but I/O space must start from 0. 311 */ 312 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 313 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 314 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 315 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 316 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 317 #define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */ 318 319 #if defined(CONFIG_PCI) 320 321 #define CONFIG_NET_MULTI 322 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 323 324 #undef CONFIG_EEPRO100 325 #undef CONFIG_TULIP 326 327 #if !defined(CONFIG_PCI_PNP) 328 #define PCI_ENET0_IOADDR 0xe0000000 329 #define PCI_ENET0_MEMADDR 0xe0000000 330 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ 331 #endif 332 333 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 334 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ 335 336 #endif /* CONFIG_PCI */ 337 338 339 #ifdef CONFIG_TSEC_ENET 340 341 #ifndef CONFIG_NET_MULTI 342 #define CONFIG_NET_MULTI 1 343 #endif 344 345 #ifndef CONFIG_MII 346 #define CONFIG_MII 1 /* MII PHY management */ 347 #endif 348 #define CONFIG_TSEC1 1 349 #define CONFIG_TSEC1_NAME "TSEC0" 350 #define CONFIG_TSEC2 1 351 #define CONFIG_TSEC2_NAME "TSEC1" 352 #define TSEC1_PHY_ADDR 0 353 #define TSEC2_PHY_ADDR 1 354 #define TSEC1_PHYIDX 0 355 #define TSEC2_PHYIDX 0 356 #define TSEC1_FLAGS TSEC_GIGABIT 357 #define TSEC2_FLAGS TSEC_GIGABIT 358 359 /* Options are: TSEC[0-1] */ 360 #define CONFIG_ETHPRIME "TSEC0" 361 362 #endif /* CONFIG_TSEC_ENET */ 363 364 #ifdef CONFIG_ETHER_ON_FCC /* CPM FCC Ethernet */ 365 366 #undef CONFIG_ETHER_NONE /* define if ether on something else */ 367 #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ 368 369 #if (CONFIG_ETHER_INDEX == 2) 370 /* 371 * - Rx-CLK is CLK13 372 * - Tx-CLK is CLK14 373 * - Select bus for bd/buffers 374 * - Full duplex 375 */ 376 #define CONFIG_SYS_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) 377 #define CONFIG_SYS_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) 378 #define CONFIG_SYS_CPMFCR_RAMTYPE 0 379 #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) 380 #define FETH2_RST 0x01 381 #elif (CONFIG_ETHER_INDEX == 3) 382 /* need more definitions here for FE3 */ 383 #define FETH3_RST 0x80 384 #endif /* CONFIG_ETHER_INDEX */ 385 386 #ifndef CONFIG_MII 387 #define CONFIG_MII 1 /* MII PHY management */ 388 #endif 389 390 #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ 391 392 /* 393 * GPIO pins used for bit-banged MII communications 394 */ 395 #define MDIO_PORT 2 /* Port C */ 396 #define MDIO_ACTIVE (iop->pdir |= 0x00400000) 397 #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) 398 #define MDIO_READ ((iop->pdat & 0x00400000) != 0) 399 400 #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ 401 else iop->pdat &= ~0x00400000 402 403 #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ 404 else iop->pdat &= ~0x00200000 405 406 #define MIIDELAY udelay(1) 407 408 #endif 409 410 411 /* 412 * Environment 413 */ 414 #ifndef CONFIG_SYS_RAMBOOT 415 #define CONFIG_ENV_IS_IN_FLASH 1 416 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) 417 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ 418 #define CONFIG_ENV_SIZE 0x2000 419 #else 420 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 421 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 422 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 423 #define CONFIG_ENV_SIZE 0x2000 424 #endif 425 426 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 427 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 428 429 /* 430 * BOOTP options 431 */ 432 #define CONFIG_BOOTP_BOOTFILESIZE 433 #define CONFIG_BOOTP_BOOTPATH 434 #define CONFIG_BOOTP_GATEWAY 435 #define CONFIG_BOOTP_HOSTNAME 436 437 438 /* 439 * Command line configuration. 440 */ 441 #include <config_cmd_default.h> 442 443 #define CONFIG_CMD_PING 444 #define CONFIG_CMD_I2C 445 #define CONFIG_CMD_ELF 446 #define CONFIG_CMD_IRQ 447 #define CONFIG_CMD_SETEXPR 448 449 #if defined(CONFIG_PCI) 450 #define CONFIG_CMD_PCI 451 #endif 452 453 #if defined(CONFIG_ETHER_ON_FCC) 454 #define CONFIG_CMD_MII 455 #endif 456 457 #if defined(CONFIG_SYS_RAMBOOT) 458 #undef CONFIG_CMD_ENV 459 #undef CONFIG_CMD_LOADS 460 #endif 461 462 463 #undef CONFIG_WATCHDOG /* watchdog disabled */ 464 465 /* 466 * Miscellaneous configurable options 467 */ 468 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 469 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 470 #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ 471 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 472 473 #if defined(CONFIG_CMD_KGDB) 474 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 475 #else 476 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 477 #endif 478 479 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 480 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 481 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 482 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 483 484 /* 485 * For booting Linux, the board info and command line data 486 * have to be in the first 8 MB of memory, since this is 487 * the maximum mapped by the Linux kernel during initialization. 488 */ 489 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 490 491 /* 492 * Internal Definitions 493 * 494 * Boot Flags 495 */ 496 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 497 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 498 499 #if defined(CONFIG_CMD_KGDB) 500 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 501 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 502 #endif 503 504 505 /* 506 * Environment Configuration 507 */ 508 509 /* The mac addresses for all ethernet interface */ 510 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) 511 #define CONFIG_HAS_ETH0 512 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD 513 #define CONFIG_HAS_ETH1 514 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 515 #define CONFIG_HAS_ETH2 516 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 517 #define CONFIG_HAS_ETH3 518 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 519 #endif 520 521 #define CONFIG_IPADDR 192.168.1.253 522 523 #define CONFIG_HOSTNAME unknown 524 #define CONFIG_ROOTPATH /nfsroot 525 #define CONFIG_BOOTFILE your.uImage 526 527 #define CONFIG_SERVERIP 192.168.1.1 528 #define CONFIG_GATEWAYIP 192.168.1.1 529 #define CONFIG_NETMASK 255.255.255.0 530 531 #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ 532 533 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 534 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 535 536 #define CONFIG_BAUDRATE 115200 537 538 #define CONFIG_EXTRA_ENV_SETTINGS \ 539 "netdev=eth0\0" \ 540 "consoledev=ttyCPM\0" \ 541 "ramdiskaddr=1000000\0" \ 542 "ramdiskfile=your.ramdisk.u-boot\0" \ 543 "fdtaddr=400000\0" \ 544 "fdtfile=mpc8560ads.dtb\0" 545 546 #define CONFIG_NFSBOOTCOMMAND \ 547 "setenv bootargs root=/dev/nfs rw " \ 548 "nfsroot=$serverip:$rootpath " \ 549 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 550 "console=$consoledev,$baudrate $othbootargs;" \ 551 "tftp $loadaddr $bootfile;" \ 552 "tftp $fdtaddr $fdtfile;" \ 553 "bootm $loadaddr - $fdtaddr" 554 555 #define CONFIG_RAMBOOTCOMMAND \ 556 "setenv bootargs root=/dev/ram rw " \ 557 "console=$consoledev,$baudrate $othbootargs;" \ 558 "tftp $ramdiskaddr $ramdiskfile;" \ 559 "tftp $loadaddr $bootfile;" \ 560 "tftp $fdtaddr $fdtfile;" \ 561 "bootm $loadaddr $ramdiskaddr $fdtaddr" 562 563 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 564 565 #endif /* __CONFIG_H */ 566