1 /* 2 * Copyright 2004, 2007 Freescale Semiconductor. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8548cds board configuration file 25 * 26 * Please refer to doc/README.mpc85xxcds for more info. 27 * 28 */ 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 /* High Level Configuration Options */ 33 #define CONFIG_BOOKE 1 /* BOOKE */ 34 #define CONFIG_E500 1 /* BOOKE e500 family */ 35 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 36 #define CONFIG_MPC8548 1 /* MPC8548 specific */ 37 #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ 38 39 #define CONFIG_PCI /* enable any pci type devices */ 40 #define CONFIG_PCI1 /* PCI controller 1 */ 41 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 42 #undef CONFIG_RIO 43 #undef CONFIG_PCI2 44 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 45 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 46 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 47 48 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 49 #define CONFIG_ENV_OVERWRITE 50 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 51 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 52 53 #define CONFIG_FSL_VIA 54 55 /* 56 * When initializing flash, if we cannot find the manufacturer ID, 57 * assume this is the AMD flash associated with the CDS board. 58 * This allows booting from a promjet. 59 */ 60 #define CONFIG_ASSUME_AMD_FLASH 61 62 #ifndef __ASSEMBLY__ 63 extern unsigned long get_clock_freq(void); 64 #endif 65 #define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ 66 67 /* 68 * These can be toggled for performance analysis, otherwise use default. 69 */ 70 #define CONFIG_L2_CACHE /* toggle L2 cache */ 71 #define CONFIG_BTB /* toggle branch predition */ 72 #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ 73 74 /* 75 * Only possible on E500 Version 2 or newer cores. 76 */ 77 #define CONFIG_ENABLE_36BIT_PHYS 1 78 79 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 80 #define CONFIG_SYS_MEMTEST_END 0x00400000 81 82 /* 83 * Base addresses -- Note these are effective addresses where the 84 * actual resources get mapped (not physical addresses) 85 */ 86 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 87 #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ 88 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ 89 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 90 91 #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) 92 #define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) 93 #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) 94 95 /* DDR Setup */ 96 #define CONFIG_FSL_DDR2 97 #undef CONFIG_FSL_DDR_INTERACTIVE 98 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ 99 #define CONFIG_DDR_SPD 100 #define CONFIG_DDR_DLL /* possible DLL fix needed */ 101 102 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 103 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 104 105 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 106 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 107 108 #define CONFIG_NUM_DDR_CONTROLLERS 1 109 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 110 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 111 112 /* I2C addresses of SPD EEPROMs */ 113 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 114 115 /* Make sure required options are set */ 116 #ifndef CONFIG_SPD_EEPROM 117 #error ("CONFIG_SPD_EEPROM is required") 118 #endif 119 120 #undef CONFIG_CLOCKS_IN_MHZ 121 122 /* 123 * Local Bus Definitions 124 */ 125 126 /* 127 * FLASH on the Local Bus 128 * Two banks, 8M each, using the CFI driver. 129 * Boot from BR0/OR0 bank at 0xff00_0000 130 * Alternate BR1/OR1 bank at 0xff80_0000 131 * 132 * BR0, BR1: 133 * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0 134 * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0 135 * Port Size = 16 bits = BRx[19:20] = 10 136 * Use GPCM = BRx[24:26] = 000 137 * Valid = BRx[31] = 1 138 * 139 * 0 4 8 12 16 20 24 28 140 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 141 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 142 * 143 * OR0, OR1: 144 * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 145 * Reserved ORx[17:18] = 11, confusion here? 146 * CSNT = ORx[20] = 1 147 * ACS = half cycle delay = ORx[21:22] = 11 148 * SCY = 6 = ORx[24:27] = 0110 149 * TRLX = use relaxed timing = ORx[29] = 1 150 * EAD = use external address latch delay = OR[31] = 1 151 * 152 * 0 4 8 12 16 20 24 28 153 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx 154 */ 155 156 #define CONFIG_SYS_BOOT_BLOCK 0xff000000 /* boot TLB block */ 157 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 16M */ 158 159 #define CONFIG_SYS_BR0_PRELIM 0xff801001 160 #define CONFIG_SYS_BR1_PRELIM 0xff001001 161 162 #define CONFIG_SYS_OR0_PRELIM 0xff806e65 163 #define CONFIG_SYS_OR1_PRELIM 0xff806e65 164 165 #define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE} 166 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 167 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 168 #undef CONFIG_SYS_FLASH_CHECKSUM 169 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 170 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 171 172 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 173 174 #define CONFIG_FLASH_CFI_DRIVER 175 #define CONFIG_SYS_FLASH_CFI 176 #define CONFIG_SYS_FLASH_EMPTY_INFO 177 178 179 /* 180 * SDRAM on the Local Bus 181 */ 182 #define CONFIG_SYS_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ 183 #define CONFIG_SYS_LBC_CACHE_SIZE 64 184 #define CONFIG_SYS_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */ 185 #define CONFIG_SYS_LBC_NONCACHE_SIZE 64 186 187 #define CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_CACHE_BASE /* Localbus SDRAM */ 188 #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ 189 190 /* 191 * Base Register 2 and Option Register 2 configure SDRAM. 192 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 193 * 194 * For BR2, need: 195 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 196 * port-size = 32-bits = BR2[19:20] = 11 197 * no parity checking = BR2[21:22] = 00 198 * SDRAM for MSEL = BR2[24:26] = 011 199 * Valid = BR[31] = 1 200 * 201 * 0 4 8 12 16 20 24 28 202 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 203 * 204 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into 205 * FIXME: the top 17 bits of BR2. 206 */ 207 208 #define CONFIG_SYS_BR2_PRELIM 0xf0001861 209 210 /* 211 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 212 * 213 * For OR2, need: 214 * 64MB mask for AM, OR2[0:7] = 1111 1100 215 * XAM, OR2[17:18] = 11 216 * 9 columns OR2[19-21] = 010 217 * 13 rows OR2[23-25] = 100 218 * EAD set for extra time OR[31] = 1 219 * 220 * 0 4 8 12 16 20 24 28 221 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 222 */ 223 224 #define CONFIG_SYS_OR2_PRELIM 0xfc006901 225 226 #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ 227 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ 228 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ 229 #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ 230 231 /* 232 * LSDMR masks 233 */ 234 #define CONFIG_SYS_LBC_LSDMR_RFEN (1 << (31 - 1)) 235 #define CONFIG_SYS_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) 236 #define CONFIG_SYS_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) 237 #define CONFIG_SYS_LBC_LSDMR_RFCR16 (7 << (31 - 16)) 238 #define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) 239 #define CONFIG_SYS_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) 240 #define CONFIG_SYS_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) 241 #define CONFIG_SYS_LBC_LSDMR_BL8 (1 << (31 - 23)) 242 #define CONFIG_SYS_LBC_LSDMR_WRC4 (0 << (31 - 27)) 243 #define CONFIG_SYS_LBC_LSDMR_CL3 (3 << (31 - 31)) 244 245 #define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) 246 #define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) 247 #define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) 248 #define CONFIG_SYS_LBC_LSDMR_OP_MRW (3 << (31 - 4)) 249 #define CONFIG_SYS_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) 250 #define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) 251 #define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) 252 #define CONFIG_SYS_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) 253 254 /* 255 * Common settings for all Local Bus SDRAM commands. 256 * At run time, either BSMA1516 (for CPU 1.1) 257 * or BSMA1617 (for CPU 1.0) (old) 258 * is OR'ed in too. 259 */ 260 #define CONFIG_SYS_LBC_LSDMR_COMMON ( CONFIG_SYS_LBC_LSDMR_RFCR16 \ 261 | CONFIG_SYS_LBC_LSDMR_PRETOACT7 \ 262 | CONFIG_SYS_LBC_LSDMR_ACTTORW7 \ 263 | CONFIG_SYS_LBC_LSDMR_BL8 \ 264 | CONFIG_SYS_LBC_LSDMR_WRC4 \ 265 | CONFIG_SYS_LBC_LSDMR_CL3 \ 266 | CONFIG_SYS_LBC_LSDMR_RFEN \ 267 ) 268 269 /* 270 * The CADMUS registers are connected to CS3 on CDS. 271 * The new memory map places CADMUS at 0xf8000000. 272 * 273 * For BR3, need: 274 * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 275 * port-size = 8-bits = BR[19:20] = 01 276 * no parity checking = BR[21:22] = 00 277 * GPMC for MSEL = BR[24:26] = 000 278 * Valid = BR[31] = 1 279 * 280 * 0 4 8 12 16 20 24 28 281 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 282 * 283 * For OR3, need: 284 * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 285 * disable buffer ctrl OR[19] = 0 286 * CSNT OR[20] = 1 287 * ACS OR[21:22] = 11 288 * XACS OR[23] = 1 289 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe 290 * SETA OR[28] = 0 291 * TRLX OR[29] = 1 292 * EHTR OR[30] = 1 293 * EAD extra time OR[31] = 1 294 * 295 * 0 4 8 12 16 20 24 28 296 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 297 */ 298 299 #define CONFIG_FSL_CADMUS 300 301 #define CADMUS_BASE_ADDR 0xf8000000 302 #define CONFIG_SYS_BR3_PRELIM 0xf8000801 303 #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 304 305 #define CONFIG_SYS_INIT_RAM_LOCK 1 306 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ 307 #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ 308 309 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ 310 311 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 312 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 313 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 314 315 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 316 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 317 318 /* Serial Port */ 319 #define CONFIG_CONS_INDEX 2 320 #undef CONFIG_SERIAL_SOFTWARE_FIFO 321 #define CONFIG_SYS_NS16550 322 #define CONFIG_SYS_NS16550_SERIAL 323 #define CONFIG_SYS_NS16550_REG_SIZE 1 324 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 325 326 #define CONFIG_SYS_BAUDRATE_TABLE \ 327 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 328 329 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 330 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 331 332 /* Use the HUSH parser */ 333 #define CONFIG_SYS_HUSH_PARSER 334 #ifdef CONFIG_SYS_HUSH_PARSER 335 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 336 #endif 337 338 /* pass open firmware flat tree */ 339 #define CONFIG_OF_LIBFDT 1 340 #define CONFIG_OF_BOARD_SETUP 1 341 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 342 343 #define CONFIG_SYS_64BIT_VSPRINTF 1 344 #define CONFIG_SYS_64BIT_STRTOUL 1 345 346 /* 347 * I2C 348 */ 349 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 350 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 351 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 352 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 353 #define CONFIG_SYS_I2C_SLAVE 0x7F 354 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 355 #define CONFIG_SYS_I2C_OFFSET 0x3000 356 357 /* EEPROM */ 358 #define CONFIG_ID_EEPROM 359 #define CONFIG_SYS_I2C_EEPROM_CCID 360 #define CONFIG_SYS_ID_EEPROM 361 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 362 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 363 364 /* 365 * General PCI 366 * Memory space is mapped 1-1, but I/O space must start from 0. 367 */ 368 #define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */ 369 370 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 371 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 372 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 373 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 374 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 375 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 376 377 #ifdef CONFIG_PCI2 378 #define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000 379 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 380 #define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ 381 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 382 #define CONFIG_SYS_PCI2_IO_PHYS 0xe2800000 383 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ 384 #endif 385 386 #ifdef CONFIG_PCIE1 387 #define CONFIG_SYS_PCIE1_MEM_BASE 0xa0000000 388 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE 389 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 390 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 391 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 392 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ 393 #endif 394 395 #ifdef CONFIG_RIO 396 /* 397 * RapidIO MMU 398 */ 399 #define CONFIG_SYS_RIO_MEM_BASE 0xC0000000 400 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ 401 #endif 402 403 #ifdef CONFIG_LEGACY 404 #define BRIDGE_ID 17 405 #define VIA_ID 2 406 #else 407 #define BRIDGE_ID 28 408 #define VIA_ID 4 409 #endif 410 411 #if defined(CONFIG_PCI) 412 413 #define CONFIG_NET_MULTI 414 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 415 416 #undef CONFIG_EEPRO100 417 #undef CONFIG_TULIP 418 419 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 420 421 #endif /* CONFIG_PCI */ 422 423 424 #if defined(CONFIG_TSEC_ENET) 425 426 #ifndef CONFIG_NET_MULTI 427 #define CONFIG_NET_MULTI 1 428 #endif 429 430 #define CONFIG_MII 1 /* MII PHY management */ 431 #define CONFIG_TSEC1 1 432 #define CONFIG_TSEC1_NAME "eTSEC0" 433 #define CONFIG_TSEC2 1 434 #define CONFIG_TSEC2_NAME "eTSEC1" 435 #define CONFIG_TSEC3 1 436 #define CONFIG_TSEC3_NAME "eTSEC2" 437 #define CONFIG_TSEC4 438 #define CONFIG_TSEC4_NAME "eTSEC3" 439 #undef CONFIG_MPC85XX_FEC 440 441 #define TSEC1_PHY_ADDR 0 442 #define TSEC2_PHY_ADDR 1 443 #define TSEC3_PHY_ADDR 2 444 #define TSEC4_PHY_ADDR 3 445 446 #define TSEC1_PHYIDX 0 447 #define TSEC2_PHYIDX 0 448 #define TSEC3_PHYIDX 0 449 #define TSEC4_PHYIDX 0 450 #define TSEC1_FLAGS TSEC_GIGABIT 451 #define TSEC2_FLAGS TSEC_GIGABIT 452 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 453 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 454 455 /* Options are: eTSEC[0-3] */ 456 #define CONFIG_ETHPRIME "eTSEC0" 457 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 458 #endif /* CONFIG_TSEC_ENET */ 459 460 /* 461 * Environment 462 */ 463 #define CONFIG_ENV_IS_IN_FLASH 1 464 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) 465 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ 466 #define CONFIG_ENV_SIZE 0x2000 467 468 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 469 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 470 471 /* 472 * BOOTP options 473 */ 474 #define CONFIG_BOOTP_BOOTFILESIZE 475 #define CONFIG_BOOTP_BOOTPATH 476 #define CONFIG_BOOTP_GATEWAY 477 #define CONFIG_BOOTP_HOSTNAME 478 479 480 /* 481 * Command line configuration. 482 */ 483 #include <config_cmd_default.h> 484 485 #define CONFIG_CMD_PING 486 #define CONFIG_CMD_I2C 487 #define CONFIG_CMD_MII 488 #define CONFIG_CMD_ELF 489 #define CONFIG_CMD_IRQ 490 #define CONFIG_CMD_SETEXPR 491 492 #if defined(CONFIG_PCI) 493 #define CONFIG_CMD_PCI 494 #endif 495 496 497 #undef CONFIG_WATCHDOG /* watchdog disabled */ 498 499 /* 500 * Miscellaneous configurable options 501 */ 502 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 503 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 504 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 505 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 506 #if defined(CONFIG_CMD_KGDB) 507 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 508 #else 509 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 510 #endif 511 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 512 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 513 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 514 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 515 516 /* 517 * For booting Linux, the board info and command line data 518 * have to be in the first 8 MB of memory, since this is 519 * the maximum mapped by the Linux kernel during initialization. 520 */ 521 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 522 523 /* 524 * Internal Definitions 525 * 526 * Boot Flags 527 */ 528 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 529 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 530 531 #if defined(CONFIG_CMD_KGDB) 532 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 533 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 534 #endif 535 536 /* 537 * Environment Configuration 538 */ 539 540 /* The mac addresses for all ethernet interface */ 541 #if defined(CONFIG_TSEC_ENET) 542 #define CONFIG_HAS_ETH0 543 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD 544 #define CONFIG_HAS_ETH1 545 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 546 #define CONFIG_HAS_ETH2 547 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 548 #define CONFIG_HAS_ETH3 549 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 550 #endif 551 552 #define CONFIG_IPADDR 192.168.1.253 553 554 #define CONFIG_HOSTNAME unknown 555 #define CONFIG_ROOTPATH /nfsroot 556 #define CONFIG_BOOTFILE 8548cds/uImage.uboot 557 #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ 558 559 #define CONFIG_SERVERIP 192.168.1.1 560 #define CONFIG_GATEWAYIP 192.168.1.1 561 #define CONFIG_NETMASK 255.255.255.0 562 563 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 564 565 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 566 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 567 568 #define CONFIG_BAUDRATE 115200 569 570 #define CONFIG_EXTRA_ENV_SETTINGS \ 571 "netdev=eth0\0" \ 572 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 573 "tftpflash=tftpboot $loadaddr $uboot; " \ 574 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 575 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 576 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 577 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 578 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 579 "consoledev=ttyS1\0" \ 580 "ramdiskaddr=2000000\0" \ 581 "ramdiskfile=ramdisk.uboot\0" \ 582 "fdtaddr=c00000\0" \ 583 "fdtfile=mpc8548cds.dtb\0" 584 585 #define CONFIG_NFSBOOTCOMMAND \ 586 "setenv bootargs root=/dev/nfs rw " \ 587 "nfsroot=$serverip:$rootpath " \ 588 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 589 "console=$consoledev,$baudrate $othbootargs;" \ 590 "tftp $loadaddr $bootfile;" \ 591 "tftp $fdtaddr $fdtfile;" \ 592 "bootm $loadaddr - $fdtaddr" 593 594 595 #define CONFIG_RAMBOOTCOMMAND \ 596 "setenv bootargs root=/dev/ram rw " \ 597 "console=$consoledev,$baudrate $othbootargs;" \ 598 "tftp $ramdiskaddr $ramdiskfile;" \ 599 "tftp $loadaddr $bootfile;" \ 600 "tftp $fdtaddr $fdtfile;" \ 601 "bootm $loadaddr $ramdiskaddr $fdtaddr" 602 603 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 604 605 #endif /* __CONFIG_H */ 606