1 /* 2 * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8548cds board configuration file 25 * 26 * Please refer to doc/README.mpc85xxcds for more info. 27 * 28 */ 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 #ifdef CONFIG_36BIT 33 #define CONFIG_PHYS_64BIT 34 #endif 35 36 /* High Level Configuration Options */ 37 #define CONFIG_BOOKE 1 /* BOOKE */ 38 #define CONFIG_E500 1 /* BOOKE e500 family */ 39 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 40 #define CONFIG_MPC8548 1 /* MPC8548 specific */ 41 #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ 42 43 #ifndef CONFIG_SYS_TEXT_BASE 44 #define CONFIG_SYS_TEXT_BASE 0xfff80000 45 #endif 46 47 #define CONFIG_SYS_SRIO 48 #define CONFIG_SRIO1 /* SRIO port 1 */ 49 50 #define CONFIG_PCI /* enable any pci type devices */ 51 #define CONFIG_PCI1 /* PCI controller 1 */ 52 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 53 #undef CONFIG_PCI2 54 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 55 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 56 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 57 58 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 59 #define CONFIG_ENV_OVERWRITE 60 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 61 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 62 63 #define CONFIG_FSL_VIA 64 65 #ifndef __ASSEMBLY__ 66 extern unsigned long get_clock_freq(void); 67 #endif 68 #define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ 69 70 /* 71 * These can be toggled for performance analysis, otherwise use default. 72 */ 73 #define CONFIG_L2_CACHE /* toggle L2 cache */ 74 #define CONFIG_BTB /* toggle branch predition */ 75 76 /* 77 * Only possible on E500 Version 2 or newer cores. 78 */ 79 #define CONFIG_ENABLE_36BIT_PHYS 1 80 81 #ifdef CONFIG_PHYS_64BIT 82 #define CONFIG_ADDR_MAP 83 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 84 #endif 85 86 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 87 #define CONFIG_SYS_MEMTEST_END 0x00400000 88 89 #define CONFIG_SYS_CCSRBAR 0xe0000000 90 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 91 92 /* DDR Setup */ 93 #define CONFIG_FSL_DDR2 94 #undef CONFIG_FSL_DDR_INTERACTIVE 95 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ 96 #define CONFIG_DDR_SPD 97 98 #define CONFIG_DDR_ECC 99 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 100 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 101 102 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 103 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 104 105 #define CONFIG_NUM_DDR_CONTROLLERS 1 106 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 107 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 108 109 /* I2C addresses of SPD EEPROMs */ 110 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 111 112 /* Make sure required options are set */ 113 #ifndef CONFIG_SPD_EEPROM 114 #error ("CONFIG_SPD_EEPROM is required") 115 #endif 116 117 #undef CONFIG_CLOCKS_IN_MHZ 118 /* 119 * Physical Address Map 120 * 121 * 32bit: 122 * 0x0000_0000 0x7fff_ffff DDR 2G cacheable 123 * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M cacheable 124 * 0xa000_0000 0xbfff_ffff PCIe MEM 512M cacheable 125 * 0xc000_0000 0xdfff_ffff RapidIO 512M cacheable 126 * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable 127 * 0xe200_0000 0xe20f_ffff PCI1 IO 1M non-cacheable 128 * 0xe300_0000 0xe30f_ffff PCIe IO 1M non-cacheable 129 * 0xf000_0000 0xf3ff_ffff SDRAM 64M cacheable 130 * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS 1M non-cacheable 131 * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable 132 * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable 133 * 134 * 36bit: 135 * 0x00000_0000 0x07fff_ffff DDR 2G cacheable 136 * 0xc0000_0000 0xc1fff_ffff PCI1 MEM 512M cacheable 137 * 0xc2000_0000 0xc3fff_ffff PCIe MEM 512M cacheable 138 * 0xc4000_0000 0xc5fff_ffff RapidIO 512M cacheable 139 * 0xfe000_0000 0xfe00f_ffff CCSR 1M non-cacheable 140 * 0xfe200_0000 0xfe20f_ffff PCI1 IO 1M non-cacheable 141 * 0xfe300_0000 0xfe30f_ffff PCIe IO 1M non-cacheable 142 * 0xff000_0000 0xff3ff_ffff SDRAM 64M cacheable 143 * 0xff800_0000 0xff80f_ffff NVRAM/CADMUS 1M non-cacheable 144 * 0xfff00_0000 0xfff7f_ffff FLASH (2nd bank) 8M non-cacheable 145 * 0xfff80_0000 0xfffff_ffff FLASH (boot bank) 8M non-cacheable 146 * 147 */ 148 149 150 /* 151 * Local Bus Definitions 152 */ 153 154 /* 155 * FLASH on the Local Bus 156 * Two banks, 8M each, using the CFI driver. 157 * Boot from BR0/OR0 bank at 0xff00_0000 158 * Alternate BR1/OR1 bank at 0xff80_0000 159 * 160 * BR0, BR1: 161 * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0 162 * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0 163 * Port Size = 16 bits = BRx[19:20] = 10 164 * Use GPCM = BRx[24:26] = 000 165 * Valid = BRx[31] = 1 166 * 167 * 0 4 8 12 16 20 24 28 168 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 169 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 170 * 171 * OR0, OR1: 172 * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 173 * Reserved ORx[17:18] = 11, confusion here? 174 * CSNT = ORx[20] = 1 175 * ACS = half cycle delay = ORx[21:22] = 11 176 * SCY = 6 = ORx[24:27] = 0110 177 * TRLX = use relaxed timing = ORx[29] = 1 178 * EAD = use external address latch delay = OR[31] = 1 179 * 180 * 0 4 8 12 16 20 24 28 181 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx 182 */ 183 184 #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ 185 #ifdef CONFIG_PHYS_64BIT 186 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfff000000ull 187 #else 188 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 189 #endif 190 191 #define CONFIG_SYS_BR0_PRELIM \ 192 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x800000)) \ 193 | BR_PS_16 | BR_V) 194 #define CONFIG_SYS_BR1_PRELIM \ 195 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 196 197 #define CONFIG_SYS_OR0_PRELIM 0xff806e65 198 #define CONFIG_SYS_OR1_PRELIM 0xff806e65 199 200 #define CONFIG_SYS_FLASH_BANKS_LIST \ 201 {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS} 202 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 203 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 204 #undef CONFIG_SYS_FLASH_CHECKSUM 205 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 206 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 207 208 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 209 210 #define CONFIG_FLASH_CFI_DRIVER 211 #define CONFIG_SYS_FLASH_CFI 212 #define CONFIG_SYS_FLASH_EMPTY_INFO 213 214 #define CONFIG_HWCONFIG /* enable hwconfig */ 215 216 /* 217 * SDRAM on the Local Bus 218 */ 219 #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ 220 #ifdef CONFIG_PHYS_64BIT 221 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull 222 #else 223 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS CONFIG_SYS_LBC_SDRAM_BASE 224 #endif 225 #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ 226 227 /* 228 * Base Register 2 and Option Register 2 configure SDRAM. 229 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 230 * 231 * For BR2, need: 232 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 233 * port-size = 32-bits = BR2[19:20] = 11 234 * no parity checking = BR2[21:22] = 00 235 * SDRAM for MSEL = BR2[24:26] = 011 236 * Valid = BR[31] = 1 237 * 238 * 0 4 8 12 16 20 24 28 239 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 240 * 241 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into 242 * FIXME: the top 17 bits of BR2. 243 */ 244 245 #define CONFIG_SYS_BR2_PRELIM \ 246 (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \ 247 | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V) 248 249 /* 250 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 251 * 252 * For OR2, need: 253 * 64MB mask for AM, OR2[0:7] = 1111 1100 254 * XAM, OR2[17:18] = 11 255 * 9 columns OR2[19-21] = 010 256 * 13 rows OR2[23-25] = 100 257 * EAD set for extra time OR[31] = 1 258 * 259 * 0 4 8 12 16 20 24 28 260 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 261 */ 262 263 #define CONFIG_SYS_OR2_PRELIM 0xfc006901 264 265 #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ 266 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ 267 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ 268 #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ 269 270 /* 271 * Common settings for all Local Bus SDRAM commands. 272 * At run time, either BSMA1516 (for CPU 1.1) 273 * or BSMA1617 (for CPU 1.0) (old) 274 * is OR'ed in too. 275 */ 276 #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ 277 | LSDMR_PRETOACT7 \ 278 | LSDMR_ACTTORW7 \ 279 | LSDMR_BL8 \ 280 | LSDMR_WRC4 \ 281 | LSDMR_CL3 \ 282 | LSDMR_RFEN \ 283 ) 284 285 /* 286 * The CADMUS registers are connected to CS3 on CDS. 287 * The new memory map places CADMUS at 0xf8000000. 288 * 289 * For BR3, need: 290 * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 291 * port-size = 8-bits = BR[19:20] = 01 292 * no parity checking = BR[21:22] = 00 293 * GPMC for MSEL = BR[24:26] = 000 294 * Valid = BR[31] = 1 295 * 296 * 0 4 8 12 16 20 24 28 297 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 298 * 299 * For OR3, need: 300 * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 301 * disable buffer ctrl OR[19] = 0 302 * CSNT OR[20] = 1 303 * ACS OR[21:22] = 11 304 * XACS OR[23] = 1 305 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe 306 * SETA OR[28] = 0 307 * TRLX OR[29] = 1 308 * EHTR OR[30] = 1 309 * EAD extra time OR[31] = 1 310 * 311 * 0 4 8 12 16 20 24 28 312 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 313 */ 314 315 #define CONFIG_FSL_CADMUS 316 317 #define CADMUS_BASE_ADDR 0xf8000000 318 #ifdef CONFIG_PHYS_64BIT 319 #define CADMUS_BASE_ADDR_PHYS 0xff8000000ull 320 #else 321 #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR 322 #endif 323 #define CONFIG_SYS_BR3_PRELIM \ 324 (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V) 325 #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 326 327 #define CONFIG_SYS_INIT_RAM_LOCK 1 328 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ 329 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ 330 331 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 332 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 333 334 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 335 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 336 337 /* Serial Port */ 338 #define CONFIG_CONS_INDEX 2 339 #define CONFIG_SYS_NS16550 340 #define CONFIG_SYS_NS16550_SERIAL 341 #define CONFIG_SYS_NS16550_REG_SIZE 1 342 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 343 344 #define CONFIG_SYS_BAUDRATE_TABLE \ 345 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 346 347 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 348 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 349 350 /* Use the HUSH parser */ 351 #define CONFIG_SYS_HUSH_PARSER 352 #ifdef CONFIG_SYS_HUSH_PARSER 353 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 354 #endif 355 356 /* pass open firmware flat tree */ 357 #define CONFIG_OF_LIBFDT 1 358 #define CONFIG_OF_BOARD_SETUP 1 359 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 360 361 /* 362 * I2C 363 */ 364 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 365 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 366 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 367 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 368 #define CONFIG_SYS_I2C_SLAVE 0x7F 369 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 370 #define CONFIG_SYS_I2C_OFFSET 0x3000 371 372 /* EEPROM */ 373 #define CONFIG_ID_EEPROM 374 #define CONFIG_SYS_I2C_EEPROM_CCID 375 #define CONFIG_SYS_ID_EEPROM 376 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 377 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 378 379 /* 380 * General PCI 381 * Memory space is mapped 1-1, but I/O space must start from 0. 382 */ 383 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 384 #ifdef CONFIG_PHYS_64BIT 385 #define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000 386 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull 387 #else 388 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 389 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 390 #endif 391 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 392 #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 393 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 394 #ifdef CONFIG_PHYS_64BIT 395 #define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull 396 #else 397 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 398 #endif 399 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 400 401 #ifdef CONFIG_PCIE1 402 #define CONFIG_SYS_PCIE1_NAME "Slot" 403 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 404 #ifdef CONFIG_PHYS_64BIT 405 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 406 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc20000000ull 407 #else 408 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 409 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 410 #endif 411 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 412 #define CONFIG_SYS_PCIE1_IO_VIRT 0xe3000000 413 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 414 #ifdef CONFIG_PHYS_64BIT 415 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfe3000000ull 416 #else 417 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 418 #endif 419 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ 420 #endif 421 422 /* 423 * RapidIO MMU 424 */ 425 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000 426 #ifdef CONFIG_PHYS_64BIT 427 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc40000000ull 428 #else 429 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc0000000 430 #endif 431 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ 432 433 #ifdef CONFIG_LEGACY 434 #define BRIDGE_ID 17 435 #define VIA_ID 2 436 #else 437 #define BRIDGE_ID 28 438 #define VIA_ID 4 439 #endif 440 441 #if defined(CONFIG_PCI) 442 443 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 444 445 #undef CONFIG_EEPRO100 446 #undef CONFIG_TULIP 447 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */ 448 449 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 450 451 #endif /* CONFIG_PCI */ 452 453 454 #if defined(CONFIG_TSEC_ENET) 455 456 #define CONFIG_MII 1 /* MII PHY management */ 457 #define CONFIG_TSEC1 1 458 #define CONFIG_TSEC1_NAME "eTSEC0" 459 #define CONFIG_TSEC2 1 460 #define CONFIG_TSEC2_NAME "eTSEC1" 461 #define CONFIG_TSEC3 1 462 #define CONFIG_TSEC3_NAME "eTSEC2" 463 #define CONFIG_TSEC4 464 #define CONFIG_TSEC4_NAME "eTSEC3" 465 #undef CONFIG_MPC85XX_FEC 466 467 #define TSEC1_PHY_ADDR 0 468 #define TSEC2_PHY_ADDR 1 469 #define TSEC3_PHY_ADDR 2 470 #define TSEC4_PHY_ADDR 3 471 472 #define TSEC1_PHYIDX 0 473 #define TSEC2_PHYIDX 0 474 #define TSEC3_PHYIDX 0 475 #define TSEC4_PHYIDX 0 476 #define TSEC1_FLAGS TSEC_GIGABIT 477 #define TSEC2_FLAGS TSEC_GIGABIT 478 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 479 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 480 481 /* Options are: eTSEC[0-3] */ 482 #define CONFIG_ETHPRIME "eTSEC0" 483 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 484 #endif /* CONFIG_TSEC_ENET */ 485 486 /* 487 * Environment 488 */ 489 #define CONFIG_ENV_IS_IN_FLASH 1 490 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 491 #define CONFIG_ENV_ADDR 0xfff80000 492 #else 493 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 494 #endif 495 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K for env */ 496 #define CONFIG_ENV_SIZE 0x2000 497 498 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 499 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 500 501 /* 502 * BOOTP options 503 */ 504 #define CONFIG_BOOTP_BOOTFILESIZE 505 #define CONFIG_BOOTP_BOOTPATH 506 #define CONFIG_BOOTP_GATEWAY 507 #define CONFIG_BOOTP_HOSTNAME 508 509 510 /* 511 * Command line configuration. 512 */ 513 #include <config_cmd_default.h> 514 515 #define CONFIG_CMD_PING 516 #define CONFIG_CMD_I2C 517 #define CONFIG_CMD_MII 518 #define CONFIG_CMD_ELF 519 #define CONFIG_CMD_IRQ 520 #define CONFIG_CMD_SETEXPR 521 #define CONFIG_CMD_REGINFO 522 523 #if defined(CONFIG_PCI) 524 #define CONFIG_CMD_PCI 525 #endif 526 527 528 #undef CONFIG_WATCHDOG /* watchdog disabled */ 529 530 /* 531 * Miscellaneous configurable options 532 */ 533 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 534 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 535 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 536 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 537 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 538 #if defined(CONFIG_CMD_KGDB) 539 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 540 #else 541 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 542 #endif 543 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 544 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 545 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 546 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 547 548 /* 549 * For booting Linux, the board info and command line data 550 * have to be in the first 64 MB of memory, since this is 551 * the maximum mapped by the Linux kernel during initialization. 552 */ 553 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 554 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 555 556 #if defined(CONFIG_CMD_KGDB) 557 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 558 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 559 #endif 560 561 /* 562 * Environment Configuration 563 */ 564 565 /* The mac addresses for all ethernet interface */ 566 #if defined(CONFIG_TSEC_ENET) 567 #define CONFIG_HAS_ETH0 568 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD 569 #define CONFIG_HAS_ETH1 570 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 571 #define CONFIG_HAS_ETH2 572 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 573 #define CONFIG_HAS_ETH3 574 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 575 #endif 576 577 #define CONFIG_IPADDR 192.168.1.253 578 579 #define CONFIG_HOSTNAME unknown 580 #define CONFIG_ROOTPATH "/nfsroot" 581 #define CONFIG_BOOTFILE "8548cds/uImage.uboot" 582 #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ 583 584 #define CONFIG_SERVERIP 192.168.1.1 585 #define CONFIG_GATEWAYIP 192.168.1.1 586 #define CONFIG_NETMASK 255.255.255.0 587 588 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 589 590 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 591 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 592 593 #define CONFIG_BAUDRATE 115200 594 595 #define CONFIG_EXTRA_ENV_SETTINGS \ 596 "hwconfig=fsl_ddr:ecc=off\0" \ 597 "netdev=eth0\0" \ 598 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 599 "tftpflash=tftpboot $loadaddr $uboot; " \ 600 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 601 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 602 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 603 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 604 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\ 605 "consoledev=ttyS1\0" \ 606 "ramdiskaddr=2000000\0" \ 607 "ramdiskfile=ramdisk.uboot\0" \ 608 "fdtaddr=c00000\0" \ 609 "fdtfile=mpc8548cds.dtb\0" 610 611 #define CONFIG_NFSBOOTCOMMAND \ 612 "setenv bootargs root=/dev/nfs rw " \ 613 "nfsroot=$serverip:$rootpath " \ 614 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 615 "console=$consoledev,$baudrate $othbootargs;" \ 616 "tftp $loadaddr $bootfile;" \ 617 "tftp $fdtaddr $fdtfile;" \ 618 "bootm $loadaddr - $fdtaddr" 619 620 621 #define CONFIG_RAMBOOTCOMMAND \ 622 "setenv bootargs root=/dev/ram rw " \ 623 "console=$consoledev,$baudrate $othbootargs;" \ 624 "tftp $ramdiskaddr $ramdiskfile;" \ 625 "tftp $loadaddr $bootfile;" \ 626 "tftp $fdtaddr $fdtfile;" \ 627 "bootm $loadaddr $ramdiskaddr $fdtaddr" 628 629 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 630 631 #endif /* __CONFIG_H */ 632