1 /* 2 * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8548cds board configuration file 25 * 26 * Please refer to doc/README.mpc85xxcds for more info. 27 * 28 */ 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 #ifdef CONFIG_36BIT 33 #define CONFIG_PHYS_64BIT 34 #endif 35 36 /* High Level Configuration Options */ 37 #define CONFIG_BOOKE 1 /* BOOKE */ 38 #define CONFIG_E500 1 /* BOOKE e500 family */ 39 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 40 #define CONFIG_MPC8548 1 /* MPC8548 specific */ 41 #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ 42 43 #ifndef CONFIG_SYS_TEXT_BASE 44 #define CONFIG_SYS_TEXT_BASE 0xfff80000 45 #endif 46 47 #define CONFIG_SYS_SRIO 48 #define CONFIG_SRIO1 /* SRIO port 1 */ 49 50 #define CONFIG_PCI /* enable any pci type devices */ 51 #define CONFIG_PCI1 /* PCI controller 1 */ 52 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 53 #undef CONFIG_PCI2 54 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 55 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 56 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 57 58 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 59 #define CONFIG_ENV_OVERWRITE 60 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 61 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 62 63 #define CONFIG_FSL_VIA 64 65 #ifndef __ASSEMBLY__ 66 extern unsigned long get_clock_freq(void); 67 #endif 68 #define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ 69 70 /* 71 * These can be toggled for performance analysis, otherwise use default. 72 */ 73 #define CONFIG_L2_CACHE /* toggle L2 cache */ 74 #define CONFIG_BTB /* toggle branch predition */ 75 76 /* 77 * Only possible on E500 Version 2 or newer cores. 78 */ 79 #define CONFIG_ENABLE_36BIT_PHYS 1 80 81 #ifdef CONFIG_PHYS_64BIT 82 #define CONFIG_ADDR_MAP 83 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 84 #endif 85 86 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 87 #define CONFIG_SYS_MEMTEST_END 0x00400000 88 89 #define CONFIG_SYS_CCSRBAR 0xe0000000 90 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 91 92 /* DDR Setup */ 93 #define CONFIG_FSL_DDR2 94 #undef CONFIG_FSL_DDR_INTERACTIVE 95 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ 96 #define CONFIG_DDR_SPD 97 98 #define CONFIG_DDR_ECC 99 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 100 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 101 102 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 103 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 104 105 #define CONFIG_NUM_DDR_CONTROLLERS 1 106 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 107 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 108 109 /* I2C addresses of SPD EEPROMs */ 110 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 111 112 /* Make sure required options are set */ 113 #ifndef CONFIG_SPD_EEPROM 114 #error ("CONFIG_SPD_EEPROM is required") 115 #endif 116 117 #undef CONFIG_CLOCKS_IN_MHZ 118 /* 119 * Physical Address Map 120 * 121 * 32bit: 122 * 0x0000_0000 0x7fff_ffff DDR 2G cacheable 123 * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M cacheable 124 * 0xa000_0000 0xbfff_ffff PCIe MEM 512M cacheable 125 * 0xc000_0000 0xdfff_ffff RapidIO 512M cacheable 126 * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable 127 * 0xe200_0000 0xe20f_ffff PCI1 IO 1M non-cacheable 128 * 0xe300_0000 0xe30f_ffff PCIe IO 1M non-cacheable 129 * 0xf000_0000 0xf3ff_ffff SDRAM 64M cacheable 130 * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS 1M non-cacheable 131 * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable 132 * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable 133 * 134 * 36bit: 135 * 0x00000_0000 0x07fff_ffff DDR 2G cacheable 136 * 0xc0000_0000 0xc1fff_ffff PCI1 MEM 512M cacheable 137 * 0xc2000_0000 0xc3fff_ffff PCIe MEM 512M cacheable 138 * 0xc4000_0000 0xc5fff_ffff RapidIO 512M cacheable 139 * 0xfe000_0000 0xfe00f_ffff CCSR 1M non-cacheable 140 * 0xfe200_0000 0xfe20f_ffff PCI1 IO 1M non-cacheable 141 * 0xfe300_0000 0xfe30f_ffff PCIe IO 1M non-cacheable 142 * 0xff000_0000 0xff3ff_ffff SDRAM 64M cacheable 143 * 0xff800_0000 0xff80f_ffff NVRAM/CADMUS 1M non-cacheable 144 * 0xfff00_0000 0xfff7f_ffff FLASH (2nd bank) 8M non-cacheable 145 * 0xfff80_0000 0xfffff_ffff FLASH (boot bank) 8M non-cacheable 146 * 147 */ 148 149 150 /* 151 * Local Bus Definitions 152 */ 153 154 /* 155 * FLASH on the Local Bus 156 * Two banks, 8M each, using the CFI driver. 157 * Boot from BR0/OR0 bank at 0xff00_0000 158 * Alternate BR1/OR1 bank at 0xff80_0000 159 * 160 * BR0, BR1: 161 * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0 162 * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0 163 * Port Size = 16 bits = BRx[19:20] = 10 164 * Use GPCM = BRx[24:26] = 000 165 * Valid = BRx[31] = 1 166 * 167 * 0 4 8 12 16 20 24 28 168 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 169 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 170 * 171 * OR0, OR1: 172 * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 173 * Reserved ORx[17:18] = 11, confusion here? 174 * CSNT = ORx[20] = 1 175 * ACS = half cycle delay = ORx[21:22] = 11 176 * SCY = 6 = ORx[24:27] = 0110 177 * TRLX = use relaxed timing = ORx[29] = 1 178 * EAD = use external address latch delay = OR[31] = 1 179 * 180 * 0 4 8 12 16 20 24 28 181 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx 182 */ 183 184 #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ 185 #ifdef CONFIG_PHYS_64BIT 186 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfff000000ull 187 #else 188 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 189 #endif 190 191 #define CONFIG_SYS_BR0_PRELIM \ 192 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V) 193 #define CONFIG_SYS_BR1_PRELIM \ 194 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 195 196 #define CONFIG_SYS_OR0_PRELIM 0xff806e65 197 #define CONFIG_SYS_OR1_PRELIM 0xff806e65 198 199 #define CONFIG_SYS_FLASH_BANKS_LIST \ 200 {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS} 201 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 202 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 203 #undef CONFIG_SYS_FLASH_CHECKSUM 204 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 205 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 206 207 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 208 209 #define CONFIG_FLASH_CFI_DRIVER 210 #define CONFIG_SYS_FLASH_CFI 211 #define CONFIG_SYS_FLASH_EMPTY_INFO 212 213 #define CONFIG_HWCONFIG /* enable hwconfig */ 214 215 /* 216 * SDRAM on the Local Bus 217 */ 218 #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ 219 #ifdef CONFIG_PHYS_64BIT 220 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull 221 #else 222 #define CONFIG_SYS_LBC_SDRAM_BASE_PHYS CONFIG_SYS_LBC_SDRAM_BASE 223 #endif 224 #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ 225 226 /* 227 * Base Register 2 and Option Register 2 configure SDRAM. 228 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 229 * 230 * For BR2, need: 231 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 232 * port-size = 32-bits = BR2[19:20] = 11 233 * no parity checking = BR2[21:22] = 00 234 * SDRAM for MSEL = BR2[24:26] = 011 235 * Valid = BR[31] = 1 236 * 237 * 0 4 8 12 16 20 24 28 238 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 239 * 240 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into 241 * FIXME: the top 17 bits of BR2. 242 */ 243 244 #define CONFIG_SYS_BR2_PRELIM \ 245 (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \ 246 | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V) 247 248 /* 249 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 250 * 251 * For OR2, need: 252 * 64MB mask for AM, OR2[0:7] = 1111 1100 253 * XAM, OR2[17:18] = 11 254 * 9 columns OR2[19-21] = 010 255 * 13 rows OR2[23-25] = 100 256 * EAD set for extra time OR[31] = 1 257 * 258 * 0 4 8 12 16 20 24 28 259 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 260 */ 261 262 #define CONFIG_SYS_OR2_PRELIM 0xfc006901 263 264 #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ 265 #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ 266 #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ 267 #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ 268 269 /* 270 * Common settings for all Local Bus SDRAM commands. 271 * At run time, either BSMA1516 (for CPU 1.1) 272 * or BSMA1617 (for CPU 1.0) (old) 273 * is OR'ed in too. 274 */ 275 #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ 276 | LSDMR_PRETOACT7 \ 277 | LSDMR_ACTTORW7 \ 278 | LSDMR_BL8 \ 279 | LSDMR_WRC4 \ 280 | LSDMR_CL3 \ 281 | LSDMR_RFEN \ 282 ) 283 284 /* 285 * The CADMUS registers are connected to CS3 on CDS. 286 * The new memory map places CADMUS at 0xf8000000. 287 * 288 * For BR3, need: 289 * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 290 * port-size = 8-bits = BR[19:20] = 01 291 * no parity checking = BR[21:22] = 00 292 * GPMC for MSEL = BR[24:26] = 000 293 * Valid = BR[31] = 1 294 * 295 * 0 4 8 12 16 20 24 28 296 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 297 * 298 * For OR3, need: 299 * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 300 * disable buffer ctrl OR[19] = 0 301 * CSNT OR[20] = 1 302 * ACS OR[21:22] = 11 303 * XACS OR[23] = 1 304 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe 305 * SETA OR[28] = 0 306 * TRLX OR[29] = 1 307 * EHTR OR[30] = 1 308 * EAD extra time OR[31] = 1 309 * 310 * 0 4 8 12 16 20 24 28 311 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 312 */ 313 314 #define CONFIG_FSL_CADMUS 315 316 #define CADMUS_BASE_ADDR 0xf8000000 317 #ifdef CONFIG_PHYS_64BIT 318 #define CADMUS_BASE_ADDR_PHYS 0xff8000000ull 319 #else 320 #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR 321 #endif 322 #define CONFIG_SYS_BR3_PRELIM \ 323 (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V) 324 #define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 325 326 #define CONFIG_SYS_INIT_RAM_LOCK 1 327 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ 328 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ 329 330 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 331 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 332 333 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 334 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 335 336 /* Serial Port */ 337 #define CONFIG_CONS_INDEX 2 338 #define CONFIG_SYS_NS16550 339 #define CONFIG_SYS_NS16550_SERIAL 340 #define CONFIG_SYS_NS16550_REG_SIZE 1 341 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 342 343 #define CONFIG_SYS_BAUDRATE_TABLE \ 344 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 345 346 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 347 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 348 349 /* Use the HUSH parser */ 350 #define CONFIG_SYS_HUSH_PARSER 351 352 /* pass open firmware flat tree */ 353 #define CONFIG_OF_LIBFDT 1 354 #define CONFIG_OF_BOARD_SETUP 1 355 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 356 357 /* 358 * I2C 359 */ 360 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 361 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 362 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 363 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 364 #define CONFIG_SYS_I2C_SLAVE 0x7F 365 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 366 #define CONFIG_SYS_I2C_OFFSET 0x3000 367 368 /* EEPROM */ 369 #define CONFIG_ID_EEPROM 370 #define CONFIG_SYS_I2C_EEPROM_CCID 371 #define CONFIG_SYS_ID_EEPROM 372 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 373 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 374 375 /* 376 * General PCI 377 * Memory space is mapped 1-1, but I/O space must start from 0. 378 */ 379 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 380 #ifdef CONFIG_PHYS_64BIT 381 #define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000 382 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull 383 #else 384 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 385 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 386 #endif 387 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 388 #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 389 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 390 #ifdef CONFIG_PHYS_64BIT 391 #define CONFIG_SYS_PCI1_IO_PHYS 0xfe2000000ull 392 #else 393 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 394 #endif 395 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 396 397 #ifdef CONFIG_PCIE1 398 #define CONFIG_SYS_PCIE1_NAME "Slot" 399 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 400 #ifdef CONFIG_PHYS_64BIT 401 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 402 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc20000000ull 403 #else 404 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 405 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 406 #endif 407 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 408 #define CONFIG_SYS_PCIE1_IO_VIRT 0xe3000000 409 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 410 #ifdef CONFIG_PHYS_64BIT 411 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfe3000000ull 412 #else 413 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 414 #endif 415 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ 416 #endif 417 418 /* 419 * RapidIO MMU 420 */ 421 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xc0000000 422 #ifdef CONFIG_PHYS_64BIT 423 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc40000000ull 424 #else 425 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc0000000 426 #endif 427 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ 428 429 #ifdef CONFIG_LEGACY 430 #define BRIDGE_ID 17 431 #define VIA_ID 2 432 #else 433 #define BRIDGE_ID 28 434 #define VIA_ID 4 435 #endif 436 437 #if defined(CONFIG_PCI) 438 439 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 440 441 #undef CONFIG_EEPRO100 442 #undef CONFIG_TULIP 443 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */ 444 445 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 446 447 #endif /* CONFIG_PCI */ 448 449 450 #if defined(CONFIG_TSEC_ENET) 451 452 #define CONFIG_MII 1 /* MII PHY management */ 453 #define CONFIG_TSEC1 1 454 #define CONFIG_TSEC1_NAME "eTSEC0" 455 #define CONFIG_TSEC2 1 456 #define CONFIG_TSEC2_NAME "eTSEC1" 457 #define CONFIG_TSEC3 1 458 #define CONFIG_TSEC3_NAME "eTSEC2" 459 #define CONFIG_TSEC4 460 #define CONFIG_TSEC4_NAME "eTSEC3" 461 #undef CONFIG_MPC85XX_FEC 462 463 #define CONFIG_PHY_MARVELL 464 465 #define TSEC1_PHY_ADDR 0 466 #define TSEC2_PHY_ADDR 1 467 #define TSEC3_PHY_ADDR 2 468 #define TSEC4_PHY_ADDR 3 469 470 #define TSEC1_PHYIDX 0 471 #define TSEC2_PHYIDX 0 472 #define TSEC3_PHYIDX 0 473 #define TSEC4_PHYIDX 0 474 #define TSEC1_FLAGS TSEC_GIGABIT 475 #define TSEC2_FLAGS TSEC_GIGABIT 476 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 477 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 478 479 /* Options are: eTSEC[0-3] */ 480 #define CONFIG_ETHPRIME "eTSEC0" 481 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 482 #endif /* CONFIG_TSEC_ENET */ 483 484 /* 485 * Environment 486 */ 487 #define CONFIG_ENV_IS_IN_FLASH 1 488 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 489 #define CONFIG_ENV_ADDR 0xfff80000 490 #else 491 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 492 #endif 493 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K for env */ 494 #define CONFIG_ENV_SIZE 0x2000 495 496 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 497 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 498 499 /* 500 * BOOTP options 501 */ 502 #define CONFIG_BOOTP_BOOTFILESIZE 503 #define CONFIG_BOOTP_BOOTPATH 504 #define CONFIG_BOOTP_GATEWAY 505 #define CONFIG_BOOTP_HOSTNAME 506 507 508 /* 509 * Command line configuration. 510 */ 511 #include <config_cmd_default.h> 512 513 #define CONFIG_CMD_PING 514 #define CONFIG_CMD_I2C 515 #define CONFIG_CMD_MII 516 #define CONFIG_CMD_ELF 517 #define CONFIG_CMD_IRQ 518 #define CONFIG_CMD_SETEXPR 519 #define CONFIG_CMD_REGINFO 520 521 #if defined(CONFIG_PCI) 522 #define CONFIG_CMD_PCI 523 #endif 524 525 526 #undef CONFIG_WATCHDOG /* watchdog disabled */ 527 528 /* 529 * Miscellaneous configurable options 530 */ 531 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 532 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 533 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 534 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 535 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 536 #if defined(CONFIG_CMD_KGDB) 537 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 538 #else 539 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 540 #endif 541 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 542 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 543 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 544 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 545 546 /* 547 * For booting Linux, the board info and command line data 548 * have to be in the first 64 MB of memory, since this is 549 * the maximum mapped by the Linux kernel during initialization. 550 */ 551 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 552 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 553 554 #if defined(CONFIG_CMD_KGDB) 555 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 556 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 557 #endif 558 559 /* 560 * Environment Configuration 561 */ 562 563 /* The mac addresses for all ethernet interface */ 564 #if defined(CONFIG_TSEC_ENET) 565 #define CONFIG_HAS_ETH0 566 #define CONFIG_ETHADDR 00:E0:0C:00:00:FD 567 #define CONFIG_HAS_ETH1 568 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 569 #define CONFIG_HAS_ETH2 570 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 571 #define CONFIG_HAS_ETH3 572 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 573 #endif 574 575 #define CONFIG_IPADDR 192.168.1.253 576 577 #define CONFIG_HOSTNAME unknown 578 #define CONFIG_ROOTPATH "/nfsroot" 579 #define CONFIG_BOOTFILE "8548cds/uImage.uboot" 580 #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ 581 582 #define CONFIG_SERVERIP 192.168.1.1 583 #define CONFIG_GATEWAYIP 192.168.1.1 584 #define CONFIG_NETMASK 255.255.255.0 585 586 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 587 588 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 589 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 590 591 #define CONFIG_BAUDRATE 115200 592 593 #define CONFIG_EXTRA_ENV_SETTINGS \ 594 "hwconfig=fsl_ddr:ecc=off\0" \ 595 "netdev=eth0\0" \ 596 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 597 "tftpflash=tftpboot $loadaddr $uboot; " \ 598 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 599 " +$filesize; " \ 600 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 601 " +$filesize; " \ 602 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 603 " $filesize; " \ 604 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 605 " +$filesize; " \ 606 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 607 " $filesize\0" \ 608 "consoledev=ttyS1\0" \ 609 "ramdiskaddr=2000000\0" \ 610 "ramdiskfile=ramdisk.uboot\0" \ 611 "fdtaddr=c00000\0" \ 612 "fdtfile=mpc8548cds.dtb\0" 613 614 #define CONFIG_NFSBOOTCOMMAND \ 615 "setenv bootargs root=/dev/nfs rw " \ 616 "nfsroot=$serverip:$rootpath " \ 617 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 618 "console=$consoledev,$baudrate $othbootargs;" \ 619 "tftp $loadaddr $bootfile;" \ 620 "tftp $fdtaddr $fdtfile;" \ 621 "bootm $loadaddr - $fdtaddr" 622 623 624 #define CONFIG_RAMBOOTCOMMAND \ 625 "setenv bootargs root=/dev/ram rw " \ 626 "console=$consoledev,$baudrate $othbootargs;" \ 627 "tftp $ramdiskaddr $ramdiskfile;" \ 628 "tftp $loadaddr $bootfile;" \ 629 "tftp $fdtaddr $fdtfile;" \ 630 "bootm $loadaddr $ramdiskaddr $fdtaddr" 631 632 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 633 634 #endif /* __CONFIG_H */ 635