1 /* 2 * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8544ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* High Level Configuration Options */ 31 #define CONFIG_BOOKE 1 /* BOOKE */ 32 #define CONFIG_E500 1 /* BOOKE e500 family */ 33 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 34 #define CONFIG_MPC8544 1 35 #define CONFIG_MPC8544DS 1 36 37 #ifndef CONFIG_SYS_TEXT_BASE 38 #define CONFIG_SYS_TEXT_BASE 0xfff80000 39 #endif 40 41 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 42 #define CONFIG_PCI1 1 /* PCI controller 1 */ 43 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 44 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 45 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 46 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 47 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 48 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 49 50 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 51 #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ 52 53 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 54 #define CONFIG_ENV_OVERWRITE 55 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 56 57 #ifndef __ASSEMBLY__ 58 extern unsigned long get_board_sys_clk(unsigned long dummy); 59 #endif 60 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 61 62 /* 63 * These can be toggled for performance analysis, otherwise use default. 64 */ 65 #define CONFIG_L2_CACHE /* toggle L2 cache */ 66 #define CONFIG_BTB /* toggle branch predition */ 67 68 /* 69 * Only possible on E500 Version 2 or newer cores. 70 */ 71 #define CONFIG_ENABLE_36BIT_PHYS 1 72 73 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 74 #define CONFIG_SYS_MEMTEST_END 0x00400000 75 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 76 77 #define CONFIG_SYS_CCSRBAR 0xe0000000 78 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 79 80 /* DDR Setup */ 81 #define CONFIG_FSL_DDR2 82 #undef CONFIG_FSL_DDR_INTERACTIVE 83 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 84 #define CONFIG_DDR_SPD 85 86 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 87 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 88 89 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 90 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 91 #define CONFIG_VERY_BIG_RAM 92 93 #define CONFIG_NUM_DDR_CONTROLLERS 1 94 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 95 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 96 97 /* I2C addresses of SPD EEPROMs */ 98 #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ 99 100 /* Make sure required options are set */ 101 #ifndef CONFIG_SPD_EEPROM 102 #error ("CONFIG_SPD_EEPROM is required") 103 #endif 104 105 #undef CONFIG_CLOCKS_IN_MHZ 106 107 /* 108 * Memory map 109 * 110 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 111 * 112 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 113 * 114 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 115 * 116 * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable 117 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 118 * 119 * Localbus cacheable 120 * 121 * 0xf000_0000 0xf3ff_ffff SDRAM 64M Cacheable 122 * 0xf401_0000 0xf401_3fff L1 for stack 4K Cacheable TLB0 123 * 124 * Localbus non-cacheable 125 * 126 * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M non-cacheable 127 * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable 128 * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable 129 * 130 */ 131 132 /* 133 * Local Bus Definitions 134 */ 135 #define CONFIG_SYS_BOOT_BLOCK 0xfc000000 /* boot TLB */ 136 137 #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */ 138 139 #define CONFIG_SYS_BR0_PRELIM 0xff801001 140 #define CONFIG_SYS_BR1_PRELIM 0xfe801001 141 142 #define CONFIG_SYS_OR0_PRELIM 0xff806e65 143 #define CONFIG_SYS_OR1_PRELIM 0xff806e65 144 145 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} 146 147 #define CONFIG_SYS_FLASH_QUIET_TEST 148 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 149 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 150 #undef CONFIG_SYS_FLASH_CHECKSUM 151 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 152 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 153 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 154 155 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 156 157 #define CONFIG_FLASH_CFI_DRIVER 158 #define CONFIG_SYS_FLASH_CFI 159 #define CONFIG_SYS_FLASH_EMPTY_INFO 160 161 #define CONFIG_SYS_LBC_NONCACHE_BASE 0xf8000000 162 163 #define CONFIG_SYS_BR2_PRELIM 0xf8201001 /* port size 16bit */ 164 #define CONFIG_SYS_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 165 166 #define CONFIG_SYS_BR3_PRELIM 0xf8100801 /* port size 8bit */ 167 #define CONFIG_SYS_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 168 169 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 170 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 171 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 172 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 173 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 174 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 175 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch 176 * register */ 177 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 178 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 179 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 180 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 181 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 182 #define PIXIS_VBOOT_FMAP 0x80 /* VBOOT - CFG_FLASHMAP */ 183 #define PIXIS_VBOOT_FBANK 0x40 /* VBOOT - CFG_FLASHBANK */ 184 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 185 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 186 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 187 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 188 #define PIXIS_VSPEED2 0x1d /* VELA VSpeed 2 */ 189 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ 190 #define PIXIS_VSPEED2_TSEC1SER 0x2 191 #define PIXIS_VSPEED2_TSEC3SER 0x1 192 #define PIXIS_VCFGEN1_TSEC1SER 0x20 193 #define PIXIS_VCFGEN1_TSEC3SER 0x40 194 #define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER|PIXIS_VSPEED2_TSEC3SER) 195 #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER) 196 197 198 #define CONFIG_SYS_INIT_RAM_LOCK 1 199 #define CONFIG_SYS_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ 200 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 201 202 203 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 204 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 205 206 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 207 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 208 209 /* Serial Port - controlled on board with jumper J8 210 * open - index 2 211 * shorted - index 1 212 */ 213 #define CONFIG_CONS_INDEX 1 214 #define CONFIG_SYS_NS16550 215 #define CONFIG_SYS_NS16550_SERIAL 216 #define CONFIG_SYS_NS16550_REG_SIZE 1 217 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 218 219 #define CONFIG_SYS_BAUDRATE_TABLE \ 220 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 221 222 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 223 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 224 225 /* Use the HUSH parser */ 226 #define CONFIG_SYS_HUSH_PARSER 227 #ifdef CONFIG_SYS_HUSH_PARSER 228 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 229 #endif 230 231 /* pass open firmware flat tree */ 232 #define CONFIG_OF_LIBFDT 1 233 #define CONFIG_OF_BOARD_SETUP 1 234 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 235 236 /* I2C */ 237 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 238 #define CONFIG_HARD_I2C /* I2C with hardware support */ 239 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 240 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 241 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 242 #define CONFIG_SYS_I2C_SLAVE 0x7F 243 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 244 #define CONFIG_SYS_I2C_OFFSET 0x3100 245 246 /* 247 * General PCI 248 * Memory space is mapped 1-1, but I/O space must start from 0. 249 */ 250 #define CONFIG_SYS_PCIE_VIRT 0x80000000 /* 1G PCIE TLB */ 251 #define CONFIG_SYS_PCIE_PHYS 0x80000000 /* 1G PCIE TLB */ 252 #define CONFIG_SYS_PCI_VIRT 0xc0000000 /* 512M PCI TLB */ 253 #define CONFIG_SYS_PCI_PHYS 0xc0000000 /* 512M PCI TLB */ 254 255 #define CONFIG_SYS_PCI1_MEM_VIRT 0xc0000000 256 #define CONFIG_SYS_PCI1_MEM_BUS 0xc0000000 257 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc0000000 258 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 259 #define CONFIG_SYS_PCI1_IO_VIRT 0xe1000000 260 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 261 #define CONFIG_SYS_PCI1_IO_PHYS 0xe1000000 262 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ 263 264 /* controller 2, Slot 1, tgtid 1, Base address 9000 */ 265 #define CONFIG_SYS_PCIE2_NAME "Slot 1" 266 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x80000000 267 #define CONFIG_SYS_PCIE2_MEM_BUS 0x80000000 268 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x80000000 269 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 270 #define CONFIG_SYS_PCIE2_IO_VIRT 0xe1010000 271 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 272 #define CONFIG_SYS_PCIE2_IO_PHYS 0xe1010000 273 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 274 275 /* controller 1, Slot 2,tgtid 2, Base address a000 */ 276 #define CONFIG_SYS_PCIE1_NAME "Slot 2" 277 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 278 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 279 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 280 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 281 #define CONFIG_SYS_PCIE1_IO_VIRT 0xe1020000 282 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 283 #define CONFIG_SYS_PCIE1_IO_PHYS 0xe1020000 284 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 285 286 /* controller 3, direct to uli, tgtid 3, Base address b000 */ 287 #define CONFIG_SYS_PCIE3_NAME "ULI" 288 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 289 #define CONFIG_SYS_PCIE3_MEM_BUS 0xb0000000 290 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xb0000000 291 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x00100000 /* 1M */ 292 #define CONFIG_SYS_PCIE3_IO_VIRT 0xb0100000 /* reuse mem LAW */ 293 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 294 #define CONFIG_SYS_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ 295 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00100000 /* 1M */ 296 #define CONFIG_SYS_PCIE3_MEM_VIRT2 0xb0200000 297 #define CONFIG_SYS_PCIE3_MEM_BUS2 0xb0200000 298 #define CONFIG_SYS_PCIE3_MEM_PHYS2 0xb0200000 299 #define CONFIG_SYS_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ 300 301 #if defined(CONFIG_PCI) 302 303 /*PCIE video card used*/ 304 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE2_IO_VIRT 305 306 /*PCI video card used*/ 307 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ 308 309 /* video */ 310 #define CONFIG_VIDEO 311 312 #if defined(CONFIG_VIDEO) 313 #define CONFIG_BIOSEMU 314 #define CONFIG_CFB_CONSOLE 315 #define CONFIG_VIDEO_SW_CURSOR 316 #define CONFIG_VGA_AS_SINGLE_DEVICE 317 #define CONFIG_ATI_RADEON_FB 318 #define CONFIG_VIDEO_LOGO 319 /*#define CONFIG_CONSOLE_CURSOR*/ 320 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 321 #endif 322 323 #define CONFIG_NET_MULTI 324 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 325 326 #undef CONFIG_EEPRO100 327 #undef CONFIG_TULIP 328 #define CONFIG_RTL8139 329 330 #ifndef CONFIG_PCI_PNP 331 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS 332 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS 333 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 334 #endif 335 336 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 337 #define CONFIG_DOS_PARTITION 338 #define CONFIG_SCSI_AHCI 339 340 #ifdef CONFIG_SCSI_AHCI 341 #define CONFIG_SATA_ULI5288 342 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 343 #define CONFIG_SYS_SCSI_MAX_LUN 1 344 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 345 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 346 #endif /* SCSCI */ 347 348 #endif /* CONFIG_PCI */ 349 350 351 #if defined(CONFIG_TSEC_ENET) 352 353 #ifndef CONFIG_NET_MULTI 354 #define CONFIG_NET_MULTI 1 355 #endif 356 357 #define CONFIG_MII 1 /* MII PHY management */ 358 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 359 #define CONFIG_TSEC1 1 360 #define CONFIG_TSEC1_NAME "eTSEC1" 361 #define CONFIG_TSEC3 1 362 #define CONFIG_TSEC3_NAME "eTSEC3" 363 364 #define CONFIG_PIXIS_SGMII_CMD 365 #define CONFIG_FSL_SGMII_RISER 1 366 #define SGMII_RISER_PHY_OFFSET 0x1c 367 368 #define TSEC1_PHY_ADDR 0 369 #define TSEC3_PHY_ADDR 1 370 371 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 372 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 373 374 #define TSEC1_PHYIDX 0 375 #define TSEC3_PHYIDX 0 376 377 #define CONFIG_ETHPRIME "eTSEC1" 378 379 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 380 #endif /* CONFIG_TSEC_ENET */ 381 382 /* 383 * Environment 384 */ 385 #define CONFIG_ENV_IS_IN_FLASH 1 386 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 387 #define CONFIG_ENV_ADDR 0xfff80000 388 #else 389 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x70000) 390 #endif 391 #define CONFIG_ENV_SIZE 0x2000 392 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ 393 394 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 395 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 396 397 /* 398 * BOOTP options 399 */ 400 #define CONFIG_BOOTP_BOOTFILESIZE 401 #define CONFIG_BOOTP_BOOTPATH 402 #define CONFIG_BOOTP_GATEWAY 403 #define CONFIG_BOOTP_HOSTNAME 404 405 406 /* 407 * Command line configuration. 408 */ 409 #include <config_cmd_default.h> 410 411 #define CONFIG_CMD_PING 412 #define CONFIG_CMD_I2C 413 #define CONFIG_CMD_MII 414 #define CONFIG_CMD_ELF 415 #define CONFIG_CMD_IRQ 416 #define CONFIG_CMD_SETEXPR 417 #define CONFIG_CMD_REGINFO 418 419 #if defined(CONFIG_PCI) 420 #define CONFIG_CMD_PCI 421 #define CONFIG_CMD_NET 422 #define CONFIG_CMD_SCSI 423 #define CONFIG_CMD_EXT2 424 #endif 425 426 427 #undef CONFIG_WATCHDOG /* watchdog disabled */ 428 429 /* 430 * Miscellaneous configurable options 431 */ 432 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 433 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 434 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 435 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 436 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 437 #if defined(CONFIG_CMD_KGDB) 438 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 439 #else 440 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 441 #endif 442 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 443 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 444 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 445 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 446 447 /* 448 * For booting Linux, the board info and command line data 449 * have to be in the first 64 MB of memory, since this is 450 * the maximum mapped by the Linux kernel during initialization. 451 */ 452 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 453 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 454 455 #if defined(CONFIG_CMD_KGDB) 456 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 457 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 458 #endif 459 460 /* 461 * Environment Configuration 462 */ 463 464 /* The mac addresses for all ethernet interface */ 465 #if defined(CONFIG_TSEC_ENET) 466 #define CONFIG_HAS_ETH0 467 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 468 #define CONFIG_HAS_ETH1 469 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 470 #endif 471 472 #define CONFIG_IPADDR 192.168.1.251 473 474 #define CONFIG_HOSTNAME 8544ds_unknown 475 #define CONFIG_ROOTPATH /nfs/mpc85xx 476 #define CONFIG_BOOTFILE 8544ds/uImage.uboot 477 #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ 478 479 #define CONFIG_SERVERIP 192.168.1.1 480 #define CONFIG_GATEWAYIP 192.168.1.1 481 #define CONFIG_NETMASK 255.255.0.0 482 483 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 484 485 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 486 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 487 488 #define CONFIG_BAUDRATE 115200 489 490 #define CONFIG_EXTRA_ENV_SETTINGS \ 491 "netdev=eth0\0" \ 492 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 493 "tftpflash=tftpboot $loadaddr $uboot; " \ 494 "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 495 "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 496 "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ 497 "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ 498 "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ 499 "consoledev=ttyS0\0" \ 500 "ramdiskaddr=2000000\0" \ 501 "ramdiskfile=8544ds/ramdisk.uboot\0" \ 502 "fdtaddr=c00000\0" \ 503 "fdtfile=8544ds/mpc8544ds.dtb\0" \ 504 "bdev=sda3\0" 505 506 #define CONFIG_NFSBOOTCOMMAND \ 507 "setenv bootargs root=/dev/nfs rw " \ 508 "nfsroot=$serverip:$rootpath " \ 509 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 510 "console=$consoledev,$baudrate $othbootargs;" \ 511 "tftp $loadaddr $bootfile;" \ 512 "tftp $fdtaddr $fdtfile;" \ 513 "bootm $loadaddr - $fdtaddr" 514 515 #define CONFIG_RAMBOOTCOMMAND \ 516 "setenv bootargs root=/dev/ram rw " \ 517 "console=$consoledev,$baudrate $othbootargs;" \ 518 "tftp $ramdiskaddr $ramdiskfile;" \ 519 "tftp $loadaddr $bootfile;" \ 520 "tftp $fdtaddr $fdtfile;" \ 521 "bootm $loadaddr $ramdiskaddr $fdtaddr" 522 523 #define CONFIG_BOOTCOMMAND \ 524 "setenv bootargs root=/dev/$bdev rw " \ 525 "console=$consoledev,$baudrate $othbootargs;" \ 526 "tftp $loadaddr $bootfile;" \ 527 "tftp $fdtaddr $fdtfile;" \ 528 "bootm $loadaddr - $fdtaddr" 529 530 #endif /* __CONFIG_H */ 531