1 /* 2 * Copyright 2007 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8544ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* High Level Configuration Options */ 31 #define CONFIG_BOOKE 1 /* BOOKE */ 32 #define CONFIG_E500 1 /* BOOKE e500 family */ 33 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 34 #define CONFIG_MPC8544 1 35 #define CONFIG_MPC8544DS 1 36 37 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 38 #define CONFIG_PCI1 1 /* PCI controller 1 */ 39 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 40 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 41 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 42 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 43 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 44 45 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 46 47 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 48 #define CONFIG_ENV_OVERWRITE 49 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 50 #undef CONFIG_DDR_DLL 51 #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ 52 53 #define CONFIG_DDR_ECC /* only for ECC DDR module */ 54 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 55 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 56 57 #define CONFIG_DDR_ECC_CMD 58 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 59 60 /* 61 * When initializing flash, if we cannot find the manufacturer ID, 62 * assume this is the AMD flash associated with the CDS board. 63 * This allows booting from a promjet. 64 */ 65 #define CONFIG_ASSUME_AMD_FLASH 66 67 #define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ 68 69 #ifndef __ASSEMBLY__ 70 extern unsigned long get_board_sys_clk(unsigned long dummy); 71 #endif 72 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 73 74 /* 75 * These can be toggled for performance analysis, otherwise use default. 76 */ 77 #define CONFIG_L2_CACHE /* toggle L2 cache */ 78 #define CONFIG_BTB /* toggle branch predition */ 79 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 80 #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ 81 82 /* 83 * Only possible on E500 Version 2 or newer cores. 84 */ 85 #define CONFIG_ENABLE_36BIT_PHYS 1 86 87 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 88 89 #undef CFG_DRAM_TEST /* memory test, takes time */ 90 #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ 91 #define CFG_MEMTEST_END 0x00400000 92 #define CFG_ALT_MEMTEST 93 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 94 95 /* 96 * Base addresses -- Note these are effective addresses where the 97 * actual resources get mapped (not physical addresses) 98 */ 99 #define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 100 #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ 101 #define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */ 102 #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ 103 104 #define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) 105 #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) 106 #define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000) 107 #define CFG_PCIE3_ADDR (CFG_CCSRBAR+0xb000) 108 109 /* 110 * DDR Setup 111 */ 112 #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 113 #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE 114 115 #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ 116 117 /* 118 * Make sure required options are set 119 */ 120 #ifndef CONFIG_SPD_EEPROM 121 #error ("CONFIG_SPD_EEPROM is required") 122 #endif 123 124 #undef CONFIG_CLOCKS_IN_MHZ 125 126 /* 127 * Memory map 128 * 129 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 130 * 131 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 132 * 133 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 134 * 135 * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable 136 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 137 * 138 * Localbus cacheable 139 * 140 * 0xf000_0000 0xf3ff_ffff SDRAM 64M Cacheable 141 * 0xf401_0000 0xf401_3fff L1 for stack 4K Cacheable TLB0 142 * 143 * Localbus non-cacheable 144 * 145 * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M non-cacheable 146 * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable 147 * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable 148 * 149 */ 150 151 /* 152 * Local Bus Definitions 153 */ 154 #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ 155 156 #define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ 157 158 #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ 159 160 #define CFG_BR0_PRELIM 0xff801001 161 #define CFG_BR1_PRELIM 0xfe801001 162 163 #define CFG_OR0_PRELIM 0xff806e65 164 #define CFG_OR1_PRELIM 0xff806e65 165 166 #define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE} 167 168 #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ 169 #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ 170 #undef CFG_FLASH_CHECKSUM 171 #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 172 #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 173 174 #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ 175 176 #define CFG_FLASH_CFI_DRIVER 177 #define CFG_FLASH_CFI 178 #define CFG_FLASH_EMPTY_INFO 179 180 #define CFG_LBC_NONCACHE_BASE 0xf8000000 181 182 #define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */ 183 #define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 184 185 #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ 186 #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 187 188 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 189 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 190 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 191 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 192 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 193 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 194 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch 195 * register */ 196 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 197 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 198 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 199 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 200 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 201 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 202 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 203 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 204 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 205 #define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ 206 207 208 /* define to use L1 as initial stack */ 209 #define CONFIG_L1_INIT_RAM 1 210 #define CFG_INIT_L1_LOCK 1 211 #define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */ 212 #define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */ 213 214 /* define to use L2SRAM as initial stack */ 215 #undef CONFIG_L2_INIT_RAM 216 #define CFG_INIT_L2_ADDR 0xf8fc0000 217 #define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */ 218 219 #ifdef CONFIG_L1_INIT_RAM 220 #define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR 221 #define CFG_INIT_RAM_END CFG_INIT_L1_END 222 #else 223 #define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR 224 #define CFG_INIT_RAM_END CFG_INIT_L2_END 225 #endif 226 227 #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ 228 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 229 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 230 231 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 232 #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 233 234 /* Serial Port - controlled on board with jumper J8 235 * open - index 2 236 * shorted - index 1 237 */ 238 #define CONFIG_CONS_INDEX 1 239 #undef CONFIG_SERIAL_SOFTWARE_FIFO 240 #define CFG_NS16550 241 #define CFG_NS16550_SERIAL 242 #define CFG_NS16550_REG_SIZE 1 243 #define CFG_NS16550_CLK get_bus_freq(0) 244 245 #define CFG_BAUDRATE_TABLE \ 246 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 247 248 #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) 249 #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) 250 251 /* Use the HUSH parser */ 252 #define CFG_HUSH_PARSER 253 #ifdef CFG_HUSH_PARSER 254 #define CFG_PROMPT_HUSH_PS2 "> " 255 #endif 256 257 /* pass open firmware flat tree */ 258 #define CONFIG_OF_LIBFDT 1 259 #define CONFIG_OF_BOARD_SETUP 1 260 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 261 262 /* I2C */ 263 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 264 #define CONFIG_HARD_I2C /* I2C with hardware support */ 265 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 266 #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ 267 #define CFG_I2C_EEPROM_ADDR 0x57 268 #define CFG_I2C_SLAVE 0x7F 269 #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 270 #define CFG_I2C_OFFSET 0x3100 271 272 /* 273 * General PCI 274 * Memory space is mapped 1-1, but I/O space must start from 0. 275 */ 276 #define CFG_PCIE_PHYS 0x80000000 /* 1G PCIE TLB */ 277 #define CFG_PCI_PHYS 0xc0000000 /* 512M PCI TLB */ 278 279 #define CFG_PCI1_MEM_BASE 0xc0000000 280 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE 281 #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ 282 #define CFG_PCI1_IO_BASE 0x00000000 283 #define CFG_PCI1_IO_PHYS 0xe1000000 284 #define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ 285 286 /* PCI view of System Memory */ 287 #define CFG_PCI_MEMORY_BUS 0x00000000 288 #define CFG_PCI_MEMORY_PHYS 0x00000000 289 #define CFG_PCI_MEMORY_SIZE 0x80000000 290 291 /* controller 2, Slot 1, tgtid 1, Base address 9000 */ 292 #define CFG_PCIE2_MEM_BASE 0x80000000 293 #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE 294 #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 295 #define CFG_PCIE2_IO_BASE 0x00000000 296 #define CFG_PCIE2_IO_PHYS 0xe1010000 297 #define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ 298 299 /* controller 1, Slot 2,tgtid 2, Base address a000 */ 300 #define CFG_PCIE1_MEM_BASE 0xa0000000 301 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE 302 #define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 303 #define CFG_PCIE1_IO_BASE 0x00000000 304 #define CFG_PCIE1_IO_PHYS 0xe1020000 305 #define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ 306 307 /* controller 3, direct to uli, tgtid 3, Base address b000 */ 308 #define CFG_PCIE3_MEM_BASE 0xb0000000 309 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE 310 #define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ 311 #define CFG_PCIE3_IO_BASE 0x00000000 312 #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ 313 #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ 314 #define CFG_PCIE3_MEM_BASE2 0xb0200000 315 #define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 316 #define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ 317 318 #if defined(CONFIG_PCI) 319 320 #define CONFIG_NET_MULTI 321 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 322 323 #undef CONFIG_EEPRO100 324 #undef CONFIG_TULIP 325 #define CONFIG_RTL8139 326 327 #ifdef CONFIG_RTL8139 328 /* This macro is used by RTL8139 but not defined in PPC architecture */ 329 #define KSEG1ADDR(x) (x) 330 #define _IO_BASE 0x00000000 331 #endif 332 333 #ifndef CONFIG_PCI_PNP 334 #define PCI_ENET0_IOADDR CFG_PCI1_IO_BASE 335 #define PCI_ENET0_MEMADDR CFG_PCI1_IO_BASE 336 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 337 #endif 338 339 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 340 #define CONFIG_DOS_PARTITION 341 #define CONFIG_SCSI_AHCI 342 343 #ifdef CONFIG_SCSI_AHCI 344 #define CONFIG_SATA_ULI5288 345 #define CFG_SCSI_MAX_SCSI_ID 4 346 #define CFG_SCSI_MAX_LUN 1 347 #define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) 348 #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE 349 #endif /* SCSCI */ 350 351 #endif /* CONFIG_PCI */ 352 353 354 #if defined(CONFIG_TSEC_ENET) 355 356 #ifndef CONFIG_NET_MULTI 357 #define CONFIG_NET_MULTI 1 358 #endif 359 360 #define CONFIG_MII 1 /* MII PHY management */ 361 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 362 #define CONFIG_TSEC1 1 363 #define CONFIG_TSEC1_NAME "eTSEC1" 364 #define CONFIG_TSEC3 1 365 #define CONFIG_TSEC3_NAME "eTSEC3" 366 367 #define TSEC1_PHY_ADDR 0 368 #define TSEC3_PHY_ADDR 1 369 370 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 371 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 372 373 #define TSEC1_PHYIDX 0 374 #define TSEC3_PHYIDX 0 375 376 #define CONFIG_ETHPRIME "eTSEC1" 377 378 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 379 #endif /* CONFIG_TSEC_ENET */ 380 381 /* 382 * Environment 383 */ 384 #define CFG_ENV_IS_IN_FLASH 1 385 #if CFG_MONITOR_BASE > 0xfff80000 386 #define CFG_ENV_ADDR 0xfff80000 387 #else 388 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) 389 #endif 390 #define CFG_ENV_SIZE 0x2000 391 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ 392 393 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 394 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 395 396 /* 397 * BOOTP options 398 */ 399 #define CONFIG_BOOTP_BOOTFILESIZE 400 #define CONFIG_BOOTP_BOOTPATH 401 #define CONFIG_BOOTP_GATEWAY 402 #define CONFIG_BOOTP_HOSTNAME 403 404 405 /* 406 * Command line configuration. 407 */ 408 #include <config_cmd_default.h> 409 410 #define CONFIG_CMD_PING 411 #define CONFIG_CMD_I2C 412 #define CONFIG_CMD_MII 413 #define CONFIG_CMD_ELF 414 415 #if defined(CONFIG_PCI) 416 #define CONFIG_CMD_PCI 417 #define CONFIG_CMD_BEDBUG 418 #define CONFIG_CMD_NET 419 #define CONFIG_CMD_SCSI 420 #define CONFIG_CMD_EXT2 421 #endif 422 423 424 #undef CONFIG_WATCHDOG /* watchdog disabled */ 425 426 /* 427 * Miscellaneous configurable options 428 */ 429 #define CFG_LONGHELP /* undef to save memory */ 430 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 431 #define CFG_LOAD_ADDR 0x2000000 /* default load address */ 432 #define CFG_PROMPT "=> " /* Monitor Command Prompt */ 433 #if defined(CONFIG_CMD_KGDB) 434 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 435 #else 436 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 437 #endif 438 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 439 #define CFG_MAXARGS 16 /* max number of command args */ 440 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 441 #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ 442 443 /* 444 * For booting Linux, the board info and command line data 445 * have to be in the first 8 MB of memory, since this is 446 * the maximum mapped by the Linux kernel during initialization. 447 */ 448 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 449 450 /* 451 * Internal Definitions 452 * 453 * Boot Flags 454 */ 455 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 456 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 457 458 #if defined(CONFIG_CMD_KGDB) 459 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 460 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 461 #endif 462 463 /* 464 * Environment Configuration 465 */ 466 467 /* The mac addresses for all ethernet interface */ 468 #if defined(CONFIG_TSEC_ENET) 469 #define CONFIG_HAS_ETH0 470 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 471 #define CONFIG_HAS_ETH1 472 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 473 #endif 474 475 #define CONFIG_IPADDR 192.168.1.251 476 477 #define CONFIG_HOSTNAME 8544ds_unknown 478 #define CONFIG_ROOTPATH /nfs/mpc85xx 479 #define CONFIG_BOOTFILE 8544ds/uImage.uboot 480 #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ 481 482 #define CONFIG_SERVERIP 192.168.1.1 483 #define CONFIG_GATEWAYIP 192.168.1.1 484 #define CONFIG_NETMASK 255.255.0.0 485 486 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 487 488 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 489 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 490 491 #define CONFIG_BAUDRATE 115200 492 493 #define CONFIG_EXTRA_ENV_SETTINGS \ 494 "netdev=eth0\0" \ 495 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 496 "tftpflash=tftpboot $loadaddr $uboot; " \ 497 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 498 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 499 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 500 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 501 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 502 "consoledev=ttyS0\0" \ 503 "ramdiskaddr=2000000\0" \ 504 "ramdiskfile=8544ds/ramdisk.uboot\0" \ 505 "fdtaddr=c00000\0" \ 506 "fdtfile=8544ds/mpc8544ds.dtb\0" \ 507 "bdev=sda3\0" 508 509 #define CONFIG_NFSBOOTCOMMAND \ 510 "setenv bootargs root=/dev/nfs rw " \ 511 "nfsroot=$serverip:$rootpath " \ 512 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 513 "console=$consoledev,$baudrate $othbootargs;" \ 514 "tftp $loadaddr $bootfile;" \ 515 "tftp $fdtaddr $fdtfile;" \ 516 "bootm $loadaddr - $fdtaddr" 517 518 #define CONFIG_RAMBOOTCOMMAND \ 519 "setenv bootargs root=/dev/ram rw " \ 520 "console=$consoledev,$baudrate $othbootargs;" \ 521 "tftp $ramdiskaddr $ramdiskfile;" \ 522 "tftp $loadaddr $bootfile;" \ 523 "tftp $fdtaddr $fdtfile;" \ 524 "bootm $loadaddr $ramdiskaddr $fdtaddr" 525 526 #define CONFIG_BOOTCOMMAND \ 527 "setenv bootargs root=/dev/$bdev rw " \ 528 "console=$consoledev,$baudrate $othbootargs;" \ 529 "tftp $loadaddr $bootfile;" \ 530 "tftp $fdtaddr $fdtfile;" \ 531 "bootm $loadaddr - $fdtaddr" 532 533 #endif /* __CONFIG_H */ 534