1 /* 2 * Copyright 2007 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8544ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* High Level Configuration Options */ 31 #define CONFIG_BOOKE 1 /* BOOKE */ 32 #define CONFIG_E500 1 /* BOOKE e500 family */ 33 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 34 #define CONFIG_MPC8544 1 35 #define CONFIG_MPC8544DS 1 36 37 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 38 #define CONFIG_PCI1 1 /* PCI controller 1 */ 39 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 40 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 41 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 42 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 43 44 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 45 #define CONFIG_ENV_OVERWRITE 46 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 47 #undef CONFIG_DDR_DLL 48 #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ 49 50 #define CONFIG_DDR_ECC /* only for ECC DDR module */ 51 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 52 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 53 54 #define CONFIG_DDR_ECC_CMD 55 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 56 57 /* 58 * When initializing flash, if we cannot find the manufacturer ID, 59 * assume this is the AMD flash associated with the CDS board. 60 * This allows booting from a promjet. 61 */ 62 #define CONFIG_ASSUME_AMD_FLASH 63 64 #define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ 65 66 #ifndef __ASSEMBLY__ 67 extern unsigned long get_board_sys_clk(unsigned long dummy); 68 #endif 69 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 70 71 /* 72 * These can be toggled for performance analysis, otherwise use default. 73 */ 74 #define CONFIG_L2_CACHE /* toggle L2 cache */ 75 #define CONFIG_BTB /* toggle branch predition */ 76 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 77 #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ 78 79 /* 80 * Only possible on E500 Version 2 or newer cores. 81 */ 82 #define CONFIG_ENABLE_36BIT_PHYS 1 83 84 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 85 86 #undef CFG_DRAM_TEST /* memory test, takes time */ 87 #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ 88 #define CFG_MEMTEST_END 0x00400000 89 #define CFG_ALT_MEMTEST 90 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 91 92 /* 93 * Base addresses -- Note these are effective addresses where the 94 * actual resources get mapped (not physical addresses) 95 */ 96 #define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 97 #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ 98 #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ 99 100 #define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) 101 #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) 102 #define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000) 103 #define CFG_PCIE3_ADDR (CFG_CCSRBAR+0xb000) 104 105 /* 106 * DDR Setup 107 */ 108 #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 109 #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE 110 111 #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ 112 113 /* 114 * Make sure required options are set 115 */ 116 #ifndef CONFIG_SPD_EEPROM 117 #error ("CONFIG_SPD_EEPROM is required") 118 #endif 119 120 #undef CONFIG_CLOCKS_IN_MHZ 121 122 /* 123 * Memory map 124 * 125 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 126 * 127 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 128 * 129 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 130 * 131 * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable 132 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 133 * 134 * Localbus cacheable 135 * 136 * 0xf000_0000 0xf3ff_ffff SDRAM 64M Cacheable 137 * 0xf401_0000 0xf401_3fff L1 for stack 4K Cacheable TLB0 138 * 139 * Localbus non-cacheable 140 * 141 * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M non-cacheable 142 * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable 143 * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable 144 * 145 */ 146 147 /* 148 * Local Bus Definitions 149 */ 150 #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ 151 152 #define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ 153 154 #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ 155 156 #define CFG_BR0_PRELIM 0xff801001 157 #define CFG_BR1_PRELIM 0xfe801001 158 159 #define CFG_OR0_PRELIM 0xff806e65 160 #define CFG_OR1_PRELIM 0xff806e65 161 162 #define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE} 163 164 #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ 165 #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ 166 #undef CFG_FLASH_CHECKSUM 167 #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 168 #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 169 170 #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ 171 172 #define CFG_FLASH_CFI_DRIVER 173 #define CFG_FLASH_CFI 174 #define CFG_FLASH_EMPTY_INFO 175 176 #define CFG_LBC_NONCACHE_BASE 0xf8000000 177 178 #define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */ 179 #define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 180 181 #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ 182 #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 183 184 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 185 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 186 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 187 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 188 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 189 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 190 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch 191 * register */ 192 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 193 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 194 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 195 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 196 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 197 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 198 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 199 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 200 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 201 202 203 /* define to use L1 as initial stack */ 204 #define CONFIG_L1_INIT_RAM 1 205 #define CFG_INIT_L1_LOCK 1 206 #define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */ 207 #define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */ 208 209 /* define to use L2SRAM as initial stack */ 210 #undef CONFIG_L2_INIT_RAM 211 #define CFG_INIT_L2_ADDR 0xf8fc0000 212 #define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */ 213 214 #ifdef CONFIG_L1_INIT_RAM 215 #define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR 216 #define CFG_INIT_RAM_END CFG_INIT_L1_END 217 #else 218 #define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR 219 #define CFG_INIT_RAM_END CFG_INIT_L2_END 220 #endif 221 222 #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ 223 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 224 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 225 226 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 227 #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 228 229 /* Serial Port - controlled on board with jumper J8 230 * open - index 2 231 * shorted - index 1 232 */ 233 #define CONFIG_CONS_INDEX 1 234 #undef CONFIG_SERIAL_SOFTWARE_FIFO 235 #define CFG_NS16550 236 #define CFG_NS16550_SERIAL 237 #define CFG_NS16550_REG_SIZE 1 238 #define CFG_NS16550_CLK get_bus_freq(0) 239 240 #define CFG_BAUDRATE_TABLE \ 241 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 242 243 #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) 244 #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) 245 246 /* Use the HUSH parser */ 247 #define CFG_HUSH_PARSER 248 #ifdef CFG_HUSH_PARSER 249 #define CFG_PROMPT_HUSH_PS2 "> " 250 #endif 251 252 /* pass open firmware flat tree */ 253 #define CONFIG_OF_FLAT_TREE 1 254 #define CONFIG_OF_BOARD_SETUP 1 255 256 #define OF_CPU "PowerPC,8544@0" 257 #define OF_SOC "soc8544@e0000000" 258 #define OF_TBCLK (bd->bi_busfreq / 8) 259 #define OF_STDOUT_PATH "/soc8544@e0000000/serial@4500" 260 261 /* I2C */ 262 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 263 #define CONFIG_HARD_I2C /* I2C with hardware support */ 264 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 265 #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ 266 #define CFG_I2C_EEPROM_ADDR 0x57 267 #define CFG_I2C_SLAVE 0x7F 268 #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 269 #define CFG_I2C_OFFSET 0x3100 270 271 /* 272 * General PCI 273 * Memory space is mapped 1-1, but I/O space must start from 0. 274 */ 275 #define CFG_PCIE_PHYS 0x80000000 /* 1G PCIE TLB */ 276 #define CFG_PCI_PHYS 0xc0000000 /* 512M PCI TLB */ 277 278 #define CFG_PCI1_MEM_BASE 0xc0000000 279 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE 280 #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ 281 #define CFG_PCI1_IO_BASE 0x00000000 282 #define CFG_PCI1_IO_PHYS 0xe1000000 283 #define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ 284 285 /* PCI view of System Memory */ 286 #define CFG_PCI_MEMORY_BUS 0x00000000 287 #define CFG_PCI_MEMORY_PHYS 0x00000000 288 #define CFG_PCI_MEMORY_SIZE 0x80000000 289 290 /* controller 2, Slot 1, tgtid 1, Base address 9000 */ 291 #define CFG_PCIE2_MEM_BASE 0x80000000 292 #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE 293 #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 294 #define CFG_PCIE2_IO_BASE 0x00000000 295 #define CFG_PCIE2_IO_PHYS 0xe1010000 296 #define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ 297 298 /* controller 1, Slot 2,tgtid 2, Base address a000 */ 299 #define CFG_PCIE1_MEM_BASE 0xa0000000 300 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE 301 #define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 302 #define CFG_PCIE1_IO_BASE 0x00000000 303 #define CFG_PCIE1_IO_PHYS 0xe1020000 304 #define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ 305 306 /* controller 3, direct to uli, tgtid 3, Base address b000 */ 307 #define CFG_PCIE3_MEM_BASE 0xb0000000 308 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE 309 #define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ 310 #define CFG_PCIE3_IO_BASE 0x00000000 311 #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ 312 #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ 313 #define CFG_PCIE3_MEM_BASE2 0xb0200000 314 #define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 315 #define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ 316 317 #if defined(CONFIG_PCI) 318 319 #define CONFIG_NET_MULTI 320 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 321 322 #undef CONFIG_EEPRO100 323 #undef CONFIG_TULIP 324 #define CONFIG_RTL8139 325 326 #ifdef CONFIG_RTL8139 327 /* This macro is used by RTL8139 but not defined in PPC architecture */ 328 #define KSEG1ADDR(x) (x) 329 #define _IO_BASE 0x00000000 330 #endif 331 332 #ifndef CONFIG_PCI_PNP 333 #define PCI_ENET0_IOADDR CFG_PCI1_IO_BASE 334 #define PCI_ENET0_MEMADDR CFG_PCI1_IO_BASE 335 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 336 #endif 337 338 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 339 #define CONFIG_DOS_PARTITION 340 #define CONFIG_SCSI_AHCI 341 342 #ifdef CONFIG_SCSI_AHCI 343 #define CONFIG_SATA_ULI5288 344 #define CFG_SCSI_MAX_SCSI_ID 4 345 #define CFG_SCSI_MAX_LUN 1 346 #define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) 347 #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE 348 #endif /* SCSCI */ 349 350 #endif /* CONFIG_PCI */ 351 352 353 #if defined(CONFIG_TSEC_ENET) 354 355 #ifndef CONFIG_NET_MULTI 356 #define CONFIG_NET_MULTI 1 357 #endif 358 359 #define CONFIG_MII 1 /* MII PHY management */ 360 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 361 #define CONFIG_TSEC1 1 362 #define CONFIG_TSEC1_NAME "eTSEC1" 363 #define CONFIG_TSEC3 1 364 #define CONFIG_TSEC3_NAME "eTSEC3" 365 366 #define TSEC1_PHY_ADDR 0 367 #define TSEC3_PHY_ADDR 1 368 369 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 370 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 371 372 #define TSEC1_PHYIDX 0 373 #define TSEC3_PHYIDX 0 374 375 #define CONFIG_ETHPRIME "eTSEC1" 376 377 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 378 #endif /* CONFIG_TSEC_ENET */ 379 380 /* 381 * Environment 382 */ 383 #define CFG_ENV_IS_IN_FLASH 1 384 #if CFG_MONITOR_BASE > 0xfff80000 385 #define CFG_ENV_ADDR 0xfff80000 386 #else 387 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) 388 #endif 389 #define CFG_ENV_SIZE 0x2000 390 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ 391 392 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 393 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 394 395 /* 396 * BOOTP options 397 */ 398 #define CONFIG_BOOTP_BOOTFILESIZE 399 #define CONFIG_BOOTP_BOOTPATH 400 #define CONFIG_BOOTP_GATEWAY 401 #define CONFIG_BOOTP_HOSTNAME 402 403 404 /* 405 * Command line configuration. 406 */ 407 #include <config_cmd_default.h> 408 409 #define CONFIG_CMD_PING 410 #define CONFIG_CMD_I2C 411 #define CONFIG_CMD_MII 412 413 #if defined(CONFIG_PCI) 414 #define CONFIG_CMD_PCI 415 #define CONFIG_CMD_BEDBUG 416 #define CONFIG_CMD_NET 417 #define CONFIG_CMD_SCSI 418 #define CONFIG_CMD_EXT2 419 #endif 420 421 422 #undef CONFIG_WATCHDOG /* watchdog disabled */ 423 424 /* 425 * Miscellaneous configurable options 426 */ 427 #define CFG_LONGHELP /* undef to save memory */ 428 #define CFG_LOAD_ADDR 0x2000000 /* default load address */ 429 #define CFG_PROMPT "=> " /* Monitor Command Prompt */ 430 #if defined(CONFIG_CMD_KGDB) 431 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 432 #else 433 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 434 #endif 435 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 436 #define CFG_MAXARGS 16 /* max number of command args */ 437 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 438 #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ 439 440 /* 441 * For booting Linux, the board info and command line data 442 * have to be in the first 8 MB of memory, since this is 443 * the maximum mapped by the Linux kernel during initialization. 444 */ 445 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 446 447 /* Cache Configuration */ 448 #define CFG_DCACHE_SIZE 32768 449 #define CFG_CACHELINE_SIZE 32 450 #if defined(CONFIG_CMD_KGDB) 451 #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ 452 #endif 453 454 /* 455 * Internal Definitions 456 * 457 * Boot Flags 458 */ 459 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 460 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 461 462 #if defined(CONFIG_CMD_KGDB) 463 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 464 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 465 #endif 466 467 /* 468 * Environment Configuration 469 */ 470 471 /* The mac addresses for all ethernet interface */ 472 #if defined(CONFIG_TSEC_ENET) 473 #define CONFIG_HAS_ETH0 474 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 475 #define CONFIG_HAS_ETH1 476 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 477 #define CONFIG_HAS_ETH2 478 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 479 #define CONFIG_HAS_ETH3 480 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 481 #endif 482 483 #define CONFIG_IPADDR 192.168.1.251 484 485 #define CONFIG_HOSTNAME 8544ds_unknown 486 #define CONFIG_ROOTPATH /nfs/mpc85xx 487 #define CONFIG_BOOTFILE 8544ds/uImage.uboot 488 #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ 489 490 #define CONFIG_SERVERIP 192.168.0.1 491 #define CONFIG_GATEWAYIP 192.168.0.1 492 #define CONFIG_NETMASK 255.255.0.0 493 494 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 495 496 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 497 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 498 499 #define CONFIG_BAUDRATE 115200 500 501 #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) 502 #define PCIE_ENV \ 503 "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ 504 "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ 505 "pcieerr=md ${a}020 1; md ${a}e00 e;" \ 506 "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ 507 "pci d.w $b.0 56 1;" \ 508 "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \ 509 "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;" \ 510 "pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \ 511 "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \ 512 "pci w $b.0 130 ffffffff\0" \ 513 "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ 514 "pcie1regs=setenv a e000a; run pciereg\0" \ 515 "pcie2regs=setenv a e0009; run pciereg\0" \ 516 "pcie3regs=setenv a e000b; run pciereg\0" \ 517 "pcie1cfg=setenv b 3; run pciecfg\0" \ 518 "pcie2cfg=setenv b 5; run pciecfg\0" \ 519 "pcie3cfg=setenv b 0; run pciecfg\0" \ 520 "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ 521 "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \ 522 "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \ 523 "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \ 524 "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \ 525 "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0" 526 #else 527 #define PCIE_ENV "" 528 #endif 529 530 #if defined(CONFIG_PCI1) 531 #define PCI_ENV \ 532 "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ 533 "echo e;md ${a}e00 9\0" \ 534 "pci1regs=setenv a e0008; run pcireg\0" \ 535 "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ 536 "pci d.w $b.0 56 1\0" \ 537 "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ 538 "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \ 539 "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \ 540 "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0" 541 #else 542 #define PCI_ENV "" 543 #endif 544 545 #if defined(CONFIG_TSEC_ENET) 546 #define ENET_ENV \ 547 "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ 548 "md ${a}098 2\0" \ 549 "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ 550 "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ 551 "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ 552 "echo mib;md ${a}680 31\0" \ 553 "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ 554 "enet1regs=setenv a e0024; run enetreg\0" \ 555 "enet3regs=setenv a e0026; run enetreg\0" 556 #else 557 #define ENET_ENV "" 558 #endif 559 560 #define CONFIG_EXTRA_ENV_SETTINGS \ 561 "netdev=eth0\0" \ 562 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 563 "tftpflash=tftpboot $loadaddr $uboot; " \ 564 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 565 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 566 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 567 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 568 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 569 "consoledev=ttyS0\0" \ 570 "ramdiskaddr=2000000\0" \ 571 "ramdiskfile=8544ds/ramdisk.uboot\0" \ 572 "dtbaddr=c00000\0" \ 573 "dtbfile=8544ds/mpc8544ds.dtb\0" \ 574 "bdev=sda3\0" \ 575 "eoi=mw e00400b0 0\0" \ 576 "iack=md e00400a0 1\0" \ 577 "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ 578 "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ 579 "ddrregs=setenv a e0002; run ddrreg\0" \ 580 "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ 581 "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ 582 "guregs=setenv a e00e0; run gureg\0" \ 583 "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ 584 "ecmregs=setenv a e0001; run ecmreg\0" \ 585 "lawregs=md e0000c08 4b\0" \ 586 "lbcregs=md e0005000 36\0" \ 587 "dma0regs=md e0021100 12\0" \ 588 "dma1regs=md e0021180 12\0" \ 589 "dma2regs=md e0021200 12\0" \ 590 "dma3regs=md e0021280 12\0" \ 591 PCIE_ENV \ 592 PCI_ENV \ 593 ENET_ENV 594 595 596 #define CONFIG_NFSBOOTCOMMAND \ 597 "setenv bootargs root=/dev/nfs rw " \ 598 "nfsroot=$serverip:$rootpath " \ 599 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 600 "console=$consoledev,$baudrate $othbootargs;" \ 601 "tftp $loadaddr $bootfile;" \ 602 "tftp $dtbaddr $dtbfile;" \ 603 "bootm $loadaddr - $dtbaddr" 604 605 606 #define CONFIG_RAMBOOTCOMMAND \ 607 "setenv bootargs root=/dev/ram rw " \ 608 "console=$consoledev,$baudrate $othbootargs;" \ 609 "tftp $ramdiskaddr $ramdiskfile;" \ 610 "tftp $loadaddr $bootfile;" \ 611 "tftp $dtbaddr $dtbfile;" \ 612 "bootm $loadaddr $ramdiskaddr $dtbaddr" 613 614 #define CONFIG_BOOTCOMMAND \ 615 "setenv bootargs root=/dev/$bdev rw " \ 616 "console=$consoledev,$baudrate $othbootargs;" \ 617 "tftp $loadaddr $bootfile;" \ 618 "tftp $dtbaddr $dtbfile;" \ 619 "bootm $loadaddr - $dtbaddr" 620 621 #endif /* __CONFIG_H */ 622