1 /* 2 * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * mpc8536ds board configuration file 9 * 10 */ 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_DISPLAY_BOARDINFO 15 #include "../board/freescale/common/ics307_clk.h" 16 17 #ifdef CONFIG_36BIT 18 #define CONFIG_PHYS_64BIT 1 19 #endif 20 21 #ifdef CONFIG_SDCARD 22 #define CONFIG_RAMBOOT_SDCARD 1 23 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 24 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 25 #endif 26 27 #ifdef CONFIG_SPIFLASH 28 #define CONFIG_RAMBOOT_SPIFLASH 1 29 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 30 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 31 #endif 32 33 #ifndef CONFIG_SYS_TEXT_BASE 34 #define CONFIG_SYS_TEXT_BASE 0xeff40000 35 #endif 36 37 #ifndef CONFIG_RESET_VECTOR_ADDRESS 38 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 39 #endif 40 41 #ifndef CONFIG_SYS_MONITOR_BASE 42 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 43 #endif 44 45 /* High Level Configuration Options */ 46 #define CONFIG_BOOKE 1 /* BOOKE */ 47 #define CONFIG_E500 1 /* BOOKE e500 family */ 48 #define CONFIG_MPC8536 1 49 #define CONFIG_MPC8536DS 1 50 51 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ 52 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 53 #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ 54 #define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ 55 #define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ 56 #define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */ 57 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 58 #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ 59 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 60 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 61 62 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 63 64 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 65 #define CONFIG_ENV_OVERWRITE 66 67 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 68 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 69 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 70 71 /* 72 * These can be toggled for performance analysis, otherwise use default. 73 */ 74 #define CONFIG_L2_CACHE /* toggle L2 cache */ 75 #define CONFIG_BTB /* toggle branch predition */ 76 77 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 78 79 #define CONFIG_ENABLE_36BIT_PHYS 1 80 81 #ifdef CONFIG_PHYS_64BIT 82 #define CONFIG_ADDR_MAP 1 83 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 84 #endif 85 86 #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ 87 #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ 88 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 89 90 /* 91 * Config the L2 Cache as L2 SRAM 92 */ 93 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 94 #ifdef CONFIG_PHYS_64BIT 95 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull 96 #else 97 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 98 #endif 99 #define CONFIG_SYS_L2_SIZE (512 << 10) 100 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 101 102 #define CONFIG_SYS_CCSRBAR 0xffe00000 103 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 104 105 #if defined(CONFIG_NAND_SPL) 106 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 107 #endif 108 109 /* DDR Setup */ 110 #define CONFIG_VERY_BIG_RAM 111 #define CONFIG_SYS_FSL_DDR2 112 #undef CONFIG_FSL_DDR_INTERACTIVE 113 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 114 #define CONFIG_DDR_SPD 115 116 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 117 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 118 119 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 120 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 121 122 #define CONFIG_NUM_DDR_CONTROLLERS 1 123 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 124 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 125 126 /* I2C addresses of SPD EEPROMs */ 127 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 128 #define CONFIG_SYS_SPD_BUS_NUM 1 129 130 /* These are used when DDR doesn't use SPD. */ 131 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 132 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 133 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 134 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 135 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 136 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 137 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 138 #define CONFIG_SYS_DDR_MODE_1 0x00480432 139 #define CONFIG_SYS_DDR_MODE_2 0x00000000 140 #define CONFIG_SYS_DDR_INTERVAL 0x06180100 141 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 142 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 143 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 144 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 145 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ 146 #define CONFIG_SYS_DDR_CONTROL2 0x04400010 147 148 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 149 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 150 #define CONFIG_SYS_DDR_SBE 0x00010000 151 152 /* Make sure required options are set */ 153 #ifndef CONFIG_SPD_EEPROM 154 #error ("CONFIG_SPD_EEPROM is required") 155 #endif 156 157 #undef CONFIG_CLOCKS_IN_MHZ 158 159 /* 160 * Memory map -- xxx -this is wrong, needs updating 161 * 162 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 163 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 164 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 165 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 166 * 167 * Localbus cacheable (TBD) 168 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 169 * 170 * Localbus non-cacheable 171 * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable 172 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 173 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 174 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 175 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 176 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 177 */ 178 179 /* 180 * Local Bus Definitions 181 */ 182 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 183 #ifdef CONFIG_PHYS_64BIT 184 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 185 #else 186 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 187 #endif 188 189 #define CONFIG_FLASH_BR_PRELIM \ 190 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) 191 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 192 193 #define CONFIG_SYS_BR1_PRELIM \ 194 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 195 | BR_PS_16 | BR_V) 196 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 197 198 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \ 199 CONFIG_SYS_FLASH_BASE_PHYS } 200 #define CONFIG_SYS_FLASH_QUIET_TEST 201 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 202 203 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 204 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 205 #undef CONFIG_SYS_FLASH_CHECKSUM 206 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 207 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 208 209 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) 210 #define CONFIG_SYS_RAMBOOT 211 #define CONFIG_SYS_EXTRA_ENV_RELOC 212 #else 213 #undef CONFIG_SYS_RAMBOOT 214 #endif 215 216 #define CONFIG_FLASH_CFI_DRIVER 217 #define CONFIG_SYS_FLASH_CFI 218 #define CONFIG_SYS_FLASH_EMPTY_INFO 219 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 220 221 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 222 223 #define CONFIG_HWCONFIG /* enable hwconfig */ 224 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 225 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 226 #ifdef CONFIG_PHYS_64BIT 227 #define PIXIS_BASE_PHYS 0xfffdf0000ull 228 #else 229 #define PIXIS_BASE_PHYS PIXIS_BASE 230 #endif 231 232 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 233 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 234 235 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 236 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 237 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 238 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 239 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 240 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 241 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 242 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 243 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 244 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 245 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 246 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 247 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 248 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 249 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 250 #define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */ 251 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 252 #define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */ 253 #define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */ 254 #define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */ 255 #define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */ 256 #define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */ 257 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 258 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 259 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 260 #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ 261 #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ 262 #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ 263 #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ 264 #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ 265 #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ 266 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 267 #define PIXIS_LED 0x25 /* LED Register */ 268 269 #define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */ 270 271 /* old pixis referenced names */ 272 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 273 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 274 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x4e 275 276 #define CONFIG_SYS_INIT_RAM_LOCK 1 277 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 278 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 279 280 #define CONFIG_SYS_GBL_DATA_OFFSET \ 281 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 282 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 283 284 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 285 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 286 287 #ifndef CONFIG_NAND_SPL 288 #define CONFIG_SYS_NAND_BASE 0xffa00000 289 #ifdef CONFIG_PHYS_64BIT 290 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 291 #else 292 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 293 #endif 294 #else 295 #define CONFIG_SYS_NAND_BASE 0xfff00000 296 #ifdef CONFIG_PHYS_64BIT 297 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull 298 #else 299 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 300 #endif 301 #endif 302 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 303 CONFIG_SYS_NAND_BASE + 0x40000, \ 304 CONFIG_SYS_NAND_BASE + 0x80000, \ 305 CONFIG_SYS_NAND_BASE + 0xC0000} 306 #define CONFIG_SYS_MAX_NAND_DEVICE 4 307 #define CONFIG_CMD_NAND 1 308 #define CONFIG_NAND_FSL_ELBC 1 309 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 310 311 /* NAND boot: 4K NAND loader config */ 312 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 313 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 314 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 315 #define CONFIG_SYS_NAND_U_BOOT_START \ 316 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 317 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 318 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 319 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 320 321 /* NAND flash config */ 322 #define CONFIG_SYS_NAND_BR_PRELIM \ 323 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 324 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 325 | BR_PS_8 /* Port Size = 8 bit */ \ 326 | BR_MS_FCM /* MSEL = FCM */ \ 327 | BR_V) /* valid */ 328 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 329 | OR_FCM_PGS /* Large Page*/ \ 330 | OR_FCM_CSCT \ 331 | OR_FCM_CST \ 332 | OR_FCM_CHT \ 333 | OR_FCM_SCY_1 \ 334 | OR_FCM_TRLX \ 335 | OR_FCM_EHTR) 336 337 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 338 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 339 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 340 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 341 342 #define CONFIG_SYS_BR4_PRELIM \ 343 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ 344 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 345 | BR_PS_8 /* Port Size = 8 bit */ \ 346 | BR_MS_FCM /* MSEL = FCM */ \ 347 | BR_V) /* valid */ 348 #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 349 #define CONFIG_SYS_BR5_PRELIM \ 350 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ 351 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 352 | BR_PS_8 /* Port Size = 8 bit */ \ 353 | BR_MS_FCM /* MSEL = FCM */ \ 354 | BR_V) /* valid */ 355 #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 356 357 #define CONFIG_SYS_BR6_PRELIM \ 358 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ 359 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 360 | BR_PS_8 /* Port Size = 8 bit */ \ 361 | BR_MS_FCM /* MSEL = FCM */ \ 362 | BR_V) /* valid */ 363 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 364 365 /* Serial Port - controlled on board with jumper J8 366 * open - index 2 367 * shorted - index 1 368 */ 369 #define CONFIG_CONS_INDEX 1 370 #define CONFIG_SYS_NS16550_SERIAL 371 #define CONFIG_SYS_NS16550_REG_SIZE 1 372 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 373 #ifdef CONFIG_NAND_SPL 374 #define CONFIG_NS16550_MIN_FUNCTIONS 375 #endif 376 377 #define CONFIG_SYS_BAUDRATE_TABLE \ 378 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 379 380 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 381 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 382 383 /* 384 * I2C 385 */ 386 #define CONFIG_SYS_I2C 387 #define CONFIG_SYS_I2C_FSL 388 #define CONFIG_SYS_FSL_I2C_SPEED 400000 389 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 390 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 391 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 392 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 393 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 394 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 395 396 /* 397 * I2C2 EEPROM 398 */ 399 #define CONFIG_ID_EEPROM 400 #ifdef CONFIG_ID_EEPROM 401 #define CONFIG_SYS_I2C_EEPROM_NXID 402 #endif 403 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 404 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 405 #define CONFIG_SYS_EEPROM_BUS_NUM 1 406 407 /* 408 * eSPI - Enhanced SPI 409 */ 410 #define CONFIG_HARD_SPI 411 412 #if defined(CONFIG_SPI_FLASH) 413 #define CONFIG_SF_DEFAULT_SPEED 10000000 414 #define CONFIG_SF_DEFAULT_MODE 0 415 #endif 416 417 /* 418 * General PCI 419 * Memory space is mapped 1-1, but I/O space must start from 0. 420 */ 421 422 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 423 #ifdef CONFIG_PHYS_64BIT 424 #define CONFIG_SYS_PCI1_MEM_BUS 0xf0000000 425 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull 426 #else 427 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 428 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 429 #endif 430 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 431 #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 432 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 433 #ifdef CONFIG_PHYS_64BIT 434 #define CONFIG_SYS_PCI1_IO_PHYS 0xfffc00000ull 435 #else 436 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 437 #endif 438 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ 439 440 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 441 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 442 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 443 #ifdef CONFIG_PHYS_64BIT 444 #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000 445 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc10000000ull 446 #else 447 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 448 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 449 #endif 450 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ 451 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000 452 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 453 #ifdef CONFIG_PHYS_64BIT 454 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc10000ull 455 #else 456 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 457 #endif 458 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 459 460 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 461 #define CONFIG_SYS_PCIE2_NAME "Slot 2" 462 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 463 #ifdef CONFIG_PHYS_64BIT 464 #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000 465 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc18000000ull 466 #else 467 #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000 468 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000 469 #endif 470 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ 471 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 472 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 473 #ifdef CONFIG_PHYS_64BIT 474 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc20000ull 475 #else 476 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 477 #endif 478 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 479 480 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 481 #define CONFIG_SYS_PCIE3_NAME "Slot 3" 482 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 483 #ifdef CONFIG_PHYS_64BIT 484 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 485 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 486 #else 487 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 488 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 489 #endif 490 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 491 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000 492 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 493 #ifdef CONFIG_PHYS_64BIT 494 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc30000ull 495 #else 496 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 497 #endif 498 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 499 500 #if defined(CONFIG_PCI) 501 502 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 503 504 /*PCIE video card used*/ 505 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT 506 507 /*PCI video card used*/ 508 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ 509 510 /* video */ 511 #define CONFIG_VIDEO 512 513 #if defined(CONFIG_VIDEO) 514 #define CONFIG_BIOSEMU 515 #define CONFIG_CFB_CONSOLE 516 #define CONFIG_VIDEO_SW_CURSOR 517 #define CONFIG_VGA_AS_SINGLE_DEVICE 518 #define CONFIG_ATI_RADEON_FB 519 #define CONFIG_VIDEO_LOGO 520 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT 521 #endif 522 523 #undef CONFIG_EEPRO100 524 #undef CONFIG_TULIP 525 526 #ifndef CONFIG_PCI_PNP 527 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS 528 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS 529 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 530 #endif 531 532 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 533 534 #endif /* CONFIG_PCI */ 535 536 /* SATA */ 537 #define CONFIG_LIBATA 538 #define CONFIG_FSL_SATA 539 540 #define CONFIG_SYS_SATA_MAX_DEVICE 2 541 #define CONFIG_SATA1 542 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 543 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 544 #define CONFIG_SATA2 545 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 546 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 547 548 #ifdef CONFIG_FSL_SATA 549 #define CONFIG_LBA48 550 #define CONFIG_CMD_SATA 551 #define CONFIG_DOS_PARTITION 552 #endif 553 554 #if defined(CONFIG_TSEC_ENET) 555 556 #define CONFIG_MII 1 /* MII PHY management */ 557 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 558 #define CONFIG_TSEC1 1 559 #define CONFIG_TSEC1_NAME "eTSEC1" 560 #define CONFIG_TSEC3 1 561 #define CONFIG_TSEC3_NAME "eTSEC3" 562 563 #define CONFIG_FSL_SGMII_RISER 1 564 #define SGMII_RISER_PHY_OFFSET 0x1c 565 566 #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ 567 #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ 568 569 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 570 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 571 572 #define TSEC1_PHYIDX 0 573 #define TSEC3_PHYIDX 0 574 575 #define CONFIG_ETHPRIME "eTSEC1" 576 577 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 578 579 #endif /* CONFIG_TSEC_ENET */ 580 581 /* 582 * Environment 583 */ 584 585 #if defined(CONFIG_SYS_RAMBOOT) 586 #if defined(CONFIG_RAMBOOT_SPIFLASH) 587 #define CONFIG_ENV_IS_IN_SPI_FLASH 588 #define CONFIG_ENV_SPI_BUS 0 589 #define CONFIG_ENV_SPI_CS 0 590 #define CONFIG_ENV_SPI_MAX_HZ 10000000 591 #define CONFIG_ENV_SPI_MODE 0 592 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 593 #define CONFIG_ENV_OFFSET 0xF0000 594 #define CONFIG_ENV_SECT_SIZE 0x10000 595 #elif defined(CONFIG_RAMBOOT_SDCARD) 596 #define CONFIG_ENV_IS_IN_MMC 597 #define CONFIG_FSL_FIXED_MMC_LOCATION 598 #define CONFIG_ENV_SIZE 0x2000 599 #define CONFIG_SYS_MMC_ENV_DEV 0 600 #else 601 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 602 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 603 #define CONFIG_ENV_SIZE 0x2000 604 #endif 605 #else 606 #define CONFIG_ENV_IS_IN_FLASH 1 607 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 608 #define CONFIG_ENV_SIZE 0x2000 609 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 610 #endif 611 612 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 613 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 614 615 /* 616 * Command line configuration. 617 */ 618 #define CONFIG_CMD_IRQ 619 #define CONFIG_CMD_IRQ 620 #define CONFIG_CMD_REGINFO 621 622 #if defined(CONFIG_PCI) 623 #define CONFIG_CMD_PCI 624 #endif 625 626 #undef CONFIG_WATCHDOG /* watchdog disabled */ 627 628 #define CONFIG_MMC 1 629 630 #ifdef CONFIG_MMC 631 #define CONFIG_FSL_ESDHC 632 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 633 #define CONFIG_GENERIC_MMC 634 #endif 635 636 /* 637 * USB 638 */ 639 #define CONFIG_HAS_FSL_MPH_USB 640 #ifdef CONFIG_HAS_FSL_MPH_USB 641 #define CONFIG_USB_EHCI 642 643 #ifdef CONFIG_USB_EHCI 644 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 645 #define CONFIG_USB_EHCI_FSL 646 #define CONFIG_USB_STORAGE 647 #endif 648 #endif 649 650 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 651 #define CONFIG_DOS_PARTITION 652 #endif 653 654 /* 655 * Miscellaneous configurable options 656 */ 657 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 658 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 659 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 660 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 661 #if defined(CONFIG_CMD_KGDB) 662 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 663 #else 664 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 665 #endif 666 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 667 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ 668 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 669 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 670 671 /* 672 * For booting Linux, the board info and command line data 673 * have to be in the first 64 MB of memory, since this is 674 * the maximum mapped by the Linux kernel during initialization. 675 */ 676 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 677 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 678 679 #if defined(CONFIG_CMD_KGDB) 680 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 681 #endif 682 683 /* 684 * Environment Configuration 685 */ 686 687 /* The mac addresses for all ethernet interface */ 688 #if defined(CONFIG_TSEC_ENET) 689 #define CONFIG_HAS_ETH0 690 #define CONFIG_HAS_ETH1 691 #define CONFIG_HAS_ETH2 692 #define CONFIG_HAS_ETH3 693 #endif 694 695 #define CONFIG_IPADDR 192.168.1.254 696 697 #define CONFIG_HOSTNAME unknown 698 #define CONFIG_ROOTPATH "/opt/nfsroot" 699 #define CONFIG_BOOTFILE "uImage" 700 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 701 702 #define CONFIG_SERVERIP 192.168.1.1 703 #define CONFIG_GATEWAYIP 192.168.1.1 704 #define CONFIG_NETMASK 255.255.255.0 705 706 /* default location for tftp and bootm */ 707 #define CONFIG_LOADADDR 1000000 708 709 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 710 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 711 712 #define CONFIG_BAUDRATE 115200 713 714 #define CONFIG_EXTRA_ENV_SETTINGS \ 715 "netdev=eth0\0" \ 716 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 717 "tftpflash=tftpboot $loadaddr $uboot; " \ 718 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 719 " +$filesize; " \ 720 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 721 " +$filesize; " \ 722 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 723 " $filesize; " \ 724 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 725 " +$filesize; " \ 726 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 727 " $filesize\0" \ 728 "consoledev=ttyS0\0" \ 729 "ramdiskaddr=2000000\0" \ 730 "ramdiskfile=8536ds/ramdisk.uboot\0" \ 731 "fdtaddr=c00000\0" \ 732 "fdtfile=8536ds/mpc8536ds.dtb\0" \ 733 "bdev=sda3\0" \ 734 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 735 736 #define CONFIG_HDBOOT \ 737 "setenv bootargs root=/dev/$bdev rw " \ 738 "console=$consoledev,$baudrate $othbootargs;" \ 739 "tftp $loadaddr $bootfile;" \ 740 "tftp $fdtaddr $fdtfile;" \ 741 "bootm $loadaddr - $fdtaddr" 742 743 #define CONFIG_NFSBOOTCOMMAND \ 744 "setenv bootargs root=/dev/nfs rw " \ 745 "nfsroot=$serverip:$rootpath " \ 746 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 747 "console=$consoledev,$baudrate $othbootargs;" \ 748 "tftp $loadaddr $bootfile;" \ 749 "tftp $fdtaddr $fdtfile;" \ 750 "bootm $loadaddr - $fdtaddr" 751 752 #define CONFIG_RAMBOOTCOMMAND \ 753 "setenv bootargs root=/dev/ram rw " \ 754 "console=$consoledev,$baudrate $othbootargs;" \ 755 "tftp $ramdiskaddr $ramdiskfile;" \ 756 "tftp $loadaddr $bootfile;" \ 757 "tftp $fdtaddr $fdtfile;" \ 758 "bootm $loadaddr $ramdiskaddr $fdtaddr" 759 760 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 761 762 #endif /* __CONFIG_H */ 763