1 /* 2 * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * mpc8536ds board configuration file 9 * 10 */ 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include "../board/freescale/common/ics307_clk.h" 15 16 #ifdef CONFIG_SDCARD 17 #define CONFIG_RAMBOOT_SDCARD 1 18 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 19 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 20 #endif 21 22 #ifdef CONFIG_SPIFLASH 23 #define CONFIG_RAMBOOT_SPIFLASH 1 24 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 25 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 26 #endif 27 28 #ifndef CONFIG_SYS_TEXT_BASE 29 #define CONFIG_SYS_TEXT_BASE 0xeff40000 30 #endif 31 32 #ifndef CONFIG_RESET_VECTOR_ADDRESS 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 34 #endif 35 36 #ifndef CONFIG_SYS_MONITOR_BASE 37 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 38 #endif 39 40 #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ 41 #define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ 42 #define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ 43 #define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */ 44 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 45 #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ 46 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 47 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 48 49 50 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 51 #define CONFIG_ENV_OVERWRITE 52 53 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 54 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 55 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 56 57 /* 58 * These can be toggled for performance analysis, otherwise use default. 59 */ 60 #define CONFIG_L2_CACHE /* toggle L2 cache */ 61 #define CONFIG_BTB /* toggle branch predition */ 62 63 #define CONFIG_ENABLE_36BIT_PHYS 1 64 65 #ifdef CONFIG_PHYS_64BIT 66 #define CONFIG_ADDR_MAP 1 67 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 68 #endif 69 70 #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ 71 #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ 72 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 73 74 /* 75 * Config the L2 Cache as L2 SRAM 76 */ 77 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 78 #ifdef CONFIG_PHYS_64BIT 79 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull 80 #else 81 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 82 #endif 83 #define CONFIG_SYS_L2_SIZE (512 << 10) 84 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 85 86 #define CONFIG_SYS_CCSRBAR 0xffe00000 87 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 88 89 #if defined(CONFIG_NAND_SPL) 90 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 91 #endif 92 93 /* DDR Setup */ 94 #define CONFIG_VERY_BIG_RAM 95 #undef CONFIG_FSL_DDR_INTERACTIVE 96 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 97 #define CONFIG_DDR_SPD 98 99 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 100 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 101 102 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 103 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 104 105 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 106 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 107 108 /* I2C addresses of SPD EEPROMs */ 109 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 110 #define CONFIG_SYS_SPD_BUS_NUM 1 111 112 /* These are used when DDR doesn't use SPD. */ 113 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 114 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 115 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 116 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 117 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 118 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 119 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 120 #define CONFIG_SYS_DDR_MODE_1 0x00480432 121 #define CONFIG_SYS_DDR_MODE_2 0x00000000 122 #define CONFIG_SYS_DDR_INTERVAL 0x06180100 123 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 124 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 125 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 126 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 127 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ 128 #define CONFIG_SYS_DDR_CONTROL2 0x04400010 129 130 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 131 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 132 #define CONFIG_SYS_DDR_SBE 0x00010000 133 134 /* Make sure required options are set */ 135 #ifndef CONFIG_SPD_EEPROM 136 #error ("CONFIG_SPD_EEPROM is required") 137 #endif 138 139 #undef CONFIG_CLOCKS_IN_MHZ 140 141 /* 142 * Memory map -- xxx -this is wrong, needs updating 143 * 144 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 145 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 146 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 147 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 148 * 149 * Localbus cacheable (TBD) 150 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 151 * 152 * Localbus non-cacheable 153 * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable 154 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 155 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 156 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 157 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 158 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 159 */ 160 161 /* 162 * Local Bus Definitions 163 */ 164 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 165 #ifdef CONFIG_PHYS_64BIT 166 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 167 #else 168 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 169 #endif 170 171 #define CONFIG_FLASH_BR_PRELIM \ 172 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) 173 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 174 175 #define CONFIG_SYS_BR1_PRELIM \ 176 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 177 | BR_PS_16 | BR_V) 178 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 179 180 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \ 181 CONFIG_SYS_FLASH_BASE_PHYS } 182 #define CONFIG_SYS_FLASH_QUIET_TEST 183 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 184 185 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 186 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 187 #undef CONFIG_SYS_FLASH_CHECKSUM 188 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 189 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 190 191 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) 192 #define CONFIG_SYS_RAMBOOT 193 #define CONFIG_SYS_EXTRA_ENV_RELOC 194 #else 195 #undef CONFIG_SYS_RAMBOOT 196 #endif 197 198 #define CONFIG_FLASH_CFI_DRIVER 199 #define CONFIG_SYS_FLASH_CFI 200 #define CONFIG_SYS_FLASH_EMPTY_INFO 201 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 202 203 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 204 205 #define CONFIG_HWCONFIG /* enable hwconfig */ 206 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 207 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 208 #ifdef CONFIG_PHYS_64BIT 209 #define PIXIS_BASE_PHYS 0xfffdf0000ull 210 #else 211 #define PIXIS_BASE_PHYS PIXIS_BASE 212 #endif 213 214 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 215 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 216 217 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 218 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 219 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 220 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 221 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 222 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 223 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 224 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 225 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 226 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 227 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 228 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 229 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 230 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 231 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 232 #define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */ 233 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 234 #define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */ 235 #define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */ 236 #define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */ 237 #define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */ 238 #define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */ 239 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 240 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 241 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 242 #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ 243 #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ 244 #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ 245 #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ 246 #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ 247 #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ 248 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 249 #define PIXIS_LED 0x25 /* LED Register */ 250 251 #define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */ 252 253 /* old pixis referenced names */ 254 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 255 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 256 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x4e 257 258 #define CONFIG_SYS_INIT_RAM_LOCK 1 259 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 260 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 261 262 #define CONFIG_SYS_GBL_DATA_OFFSET \ 263 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 264 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 265 266 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 267 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 268 269 #ifndef CONFIG_NAND_SPL 270 #define CONFIG_SYS_NAND_BASE 0xffa00000 271 #ifdef CONFIG_PHYS_64BIT 272 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 273 #else 274 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 275 #endif 276 #else 277 #define CONFIG_SYS_NAND_BASE 0xfff00000 278 #ifdef CONFIG_PHYS_64BIT 279 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull 280 #else 281 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 282 #endif 283 #endif 284 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 285 CONFIG_SYS_NAND_BASE + 0x40000, \ 286 CONFIG_SYS_NAND_BASE + 0x80000, \ 287 CONFIG_SYS_NAND_BASE + 0xC0000} 288 #define CONFIG_SYS_MAX_NAND_DEVICE 4 289 #define CONFIG_CMD_NAND 1 290 #define CONFIG_NAND_FSL_ELBC 1 291 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 292 293 /* NAND boot: 4K NAND loader config */ 294 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 295 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 296 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 297 #define CONFIG_SYS_NAND_U_BOOT_START \ 298 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 299 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 300 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 301 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 302 303 /* NAND flash config */ 304 #define CONFIG_SYS_NAND_BR_PRELIM \ 305 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 306 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 307 | BR_PS_8 /* Port Size = 8 bit */ \ 308 | BR_MS_FCM /* MSEL = FCM */ \ 309 | BR_V) /* valid */ 310 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 311 | OR_FCM_PGS /* Large Page*/ \ 312 | OR_FCM_CSCT \ 313 | OR_FCM_CST \ 314 | OR_FCM_CHT \ 315 | OR_FCM_SCY_1 \ 316 | OR_FCM_TRLX \ 317 | OR_FCM_EHTR) 318 319 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 320 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 321 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 322 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 323 324 #define CONFIG_SYS_BR4_PRELIM \ 325 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ 326 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 327 | BR_PS_8 /* Port Size = 8 bit */ \ 328 | BR_MS_FCM /* MSEL = FCM */ \ 329 | BR_V) /* valid */ 330 #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 331 #define CONFIG_SYS_BR5_PRELIM \ 332 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ 333 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 334 | BR_PS_8 /* Port Size = 8 bit */ \ 335 | BR_MS_FCM /* MSEL = FCM */ \ 336 | BR_V) /* valid */ 337 #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 338 339 #define CONFIG_SYS_BR6_PRELIM \ 340 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ 341 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 342 | BR_PS_8 /* Port Size = 8 bit */ \ 343 | BR_MS_FCM /* MSEL = FCM */ \ 344 | BR_V) /* valid */ 345 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 346 347 /* Serial Port - controlled on board with jumper J8 348 * open - index 2 349 * shorted - index 1 350 */ 351 #define CONFIG_CONS_INDEX 1 352 #define CONFIG_SYS_NS16550_SERIAL 353 #define CONFIG_SYS_NS16550_REG_SIZE 1 354 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 355 #ifdef CONFIG_NAND_SPL 356 #define CONFIG_NS16550_MIN_FUNCTIONS 357 #endif 358 359 #define CONFIG_SYS_BAUDRATE_TABLE \ 360 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 361 362 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 363 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 364 365 /* 366 * I2C 367 */ 368 #define CONFIG_SYS_I2C 369 #define CONFIG_SYS_I2C_FSL 370 #define CONFIG_SYS_FSL_I2C_SPEED 400000 371 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 372 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 373 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 374 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 375 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 376 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 377 378 /* 379 * I2C2 EEPROM 380 */ 381 #define CONFIG_ID_EEPROM 382 #ifdef CONFIG_ID_EEPROM 383 #define CONFIG_SYS_I2C_EEPROM_NXID 384 #endif 385 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 386 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 387 #define CONFIG_SYS_EEPROM_BUS_NUM 1 388 389 /* 390 * eSPI - Enhanced SPI 391 */ 392 #define CONFIG_HARD_SPI 393 394 #if defined(CONFIG_SPI_FLASH) 395 #define CONFIG_SF_DEFAULT_SPEED 10000000 396 #define CONFIG_SF_DEFAULT_MODE 0 397 #endif 398 399 /* 400 * General PCI 401 * Memory space is mapped 1-1, but I/O space must start from 0. 402 */ 403 404 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 405 #ifdef CONFIG_PHYS_64BIT 406 #define CONFIG_SYS_PCI1_MEM_BUS 0xf0000000 407 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull 408 #else 409 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 410 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 411 #endif 412 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 413 #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 414 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 415 #ifdef CONFIG_PHYS_64BIT 416 #define CONFIG_SYS_PCI1_IO_PHYS 0xfffc00000ull 417 #else 418 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 419 #endif 420 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ 421 422 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 423 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 424 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 425 #ifdef CONFIG_PHYS_64BIT 426 #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000 427 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc10000000ull 428 #else 429 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 430 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 431 #endif 432 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ 433 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000 434 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 435 #ifdef CONFIG_PHYS_64BIT 436 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc10000ull 437 #else 438 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 439 #endif 440 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 441 442 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 443 #define CONFIG_SYS_PCIE2_NAME "Slot 2" 444 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 445 #ifdef CONFIG_PHYS_64BIT 446 #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000 447 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc18000000ull 448 #else 449 #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000 450 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000 451 #endif 452 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ 453 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 454 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 455 #ifdef CONFIG_PHYS_64BIT 456 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc20000ull 457 #else 458 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 459 #endif 460 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 461 462 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 463 #define CONFIG_SYS_PCIE3_NAME "Slot 3" 464 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 465 #ifdef CONFIG_PHYS_64BIT 466 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 467 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 468 #else 469 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 470 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 471 #endif 472 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 473 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000 474 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 475 #ifdef CONFIG_PHYS_64BIT 476 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc30000ull 477 #else 478 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 479 #endif 480 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 481 482 #if defined(CONFIG_PCI) 483 /*PCIE video card used*/ 484 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT 485 486 /*PCI video card used*/ 487 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ 488 489 /* video */ 490 491 #if defined(CONFIG_VIDEO) 492 #define CONFIG_BIOSEMU 493 #define CONFIG_ATI_RADEON_FB 494 #define CONFIG_VIDEO_LOGO 495 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT 496 #endif 497 498 #undef CONFIG_EEPRO100 499 #undef CONFIG_TULIP 500 501 #ifndef CONFIG_PCI_PNP 502 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS 503 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS 504 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 505 #endif 506 507 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 508 509 #endif /* CONFIG_PCI */ 510 511 /* SATA */ 512 #define CONFIG_LIBATA 513 #define CONFIG_FSL_SATA 514 515 #define CONFIG_SYS_SATA_MAX_DEVICE 2 516 #define CONFIG_SATA1 517 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 518 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 519 #define CONFIG_SATA2 520 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 521 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 522 523 #ifdef CONFIG_FSL_SATA 524 #define CONFIG_LBA48 525 #endif 526 527 #if defined(CONFIG_TSEC_ENET) 528 529 #define CONFIG_MII 1 /* MII PHY management */ 530 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 531 #define CONFIG_TSEC1 1 532 #define CONFIG_TSEC1_NAME "eTSEC1" 533 #define CONFIG_TSEC3 1 534 #define CONFIG_TSEC3_NAME "eTSEC3" 535 536 #define CONFIG_FSL_SGMII_RISER 1 537 #define SGMII_RISER_PHY_OFFSET 0x1c 538 539 #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ 540 #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ 541 542 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 543 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 544 545 #define TSEC1_PHYIDX 0 546 #define TSEC3_PHYIDX 0 547 548 #define CONFIG_ETHPRIME "eTSEC1" 549 550 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 551 552 #endif /* CONFIG_TSEC_ENET */ 553 554 /* 555 * Environment 556 */ 557 558 #if defined(CONFIG_SYS_RAMBOOT) 559 #if defined(CONFIG_RAMBOOT_SPIFLASH) 560 #define CONFIG_ENV_IS_IN_SPI_FLASH 561 #define CONFIG_ENV_SPI_BUS 0 562 #define CONFIG_ENV_SPI_CS 0 563 #define CONFIG_ENV_SPI_MAX_HZ 10000000 564 #define CONFIG_ENV_SPI_MODE 0 565 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 566 #define CONFIG_ENV_OFFSET 0xF0000 567 #define CONFIG_ENV_SECT_SIZE 0x10000 568 #elif defined(CONFIG_RAMBOOT_SDCARD) 569 #define CONFIG_ENV_IS_IN_MMC 570 #define CONFIG_FSL_FIXED_MMC_LOCATION 571 #define CONFIG_ENV_SIZE 0x2000 572 #define CONFIG_SYS_MMC_ENV_DEV 0 573 #else 574 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 575 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 576 #define CONFIG_ENV_SIZE 0x2000 577 #endif 578 #else 579 #define CONFIG_ENV_IS_IN_FLASH 1 580 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 581 #define CONFIG_ENV_SIZE 0x2000 582 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 583 #endif 584 585 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 586 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 587 588 /* 589 * Command line configuration. 590 */ 591 #define CONFIG_CMD_REGINFO 592 593 #if defined(CONFIG_PCI) 594 #define CONFIG_CMD_PCI 595 #endif 596 597 #undef CONFIG_WATCHDOG /* watchdog disabled */ 598 599 #ifdef CONFIG_MMC 600 #define CONFIG_FSL_ESDHC 601 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 602 #endif 603 604 /* 605 * USB 606 */ 607 #define CONFIG_HAS_FSL_MPH_USB 608 #ifdef CONFIG_HAS_FSL_MPH_USB 609 #ifdef CONFIG_USB_EHCI_HCD 610 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 611 #define CONFIG_USB_EHCI_FSL 612 #endif 613 #endif 614 615 /* 616 * Miscellaneous configurable options 617 */ 618 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 619 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 620 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 621 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 622 #if defined(CONFIG_CMD_KGDB) 623 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 624 #else 625 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 626 #endif 627 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 628 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ 629 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 630 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 631 632 /* 633 * For booting Linux, the board info and command line data 634 * have to be in the first 64 MB of memory, since this is 635 * the maximum mapped by the Linux kernel during initialization. 636 */ 637 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 638 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 639 640 #if defined(CONFIG_CMD_KGDB) 641 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 642 #endif 643 644 /* 645 * Environment Configuration 646 */ 647 648 /* The mac addresses for all ethernet interface */ 649 #if defined(CONFIG_TSEC_ENET) 650 #define CONFIG_HAS_ETH0 651 #define CONFIG_HAS_ETH1 652 #define CONFIG_HAS_ETH2 653 #define CONFIG_HAS_ETH3 654 #endif 655 656 #define CONFIG_IPADDR 192.168.1.254 657 658 #define CONFIG_HOSTNAME unknown 659 #define CONFIG_ROOTPATH "/opt/nfsroot" 660 #define CONFIG_BOOTFILE "uImage" 661 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 662 663 #define CONFIG_SERVERIP 192.168.1.1 664 #define CONFIG_GATEWAYIP 192.168.1.1 665 #define CONFIG_NETMASK 255.255.255.0 666 667 /* default location for tftp and bootm */ 668 #define CONFIG_LOADADDR 1000000 669 670 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 671 672 #define CONFIG_EXTRA_ENV_SETTINGS \ 673 "netdev=eth0\0" \ 674 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 675 "tftpflash=tftpboot $loadaddr $uboot; " \ 676 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 677 " +$filesize; " \ 678 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 679 " +$filesize; " \ 680 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 681 " $filesize; " \ 682 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 683 " +$filesize; " \ 684 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 685 " $filesize\0" \ 686 "consoledev=ttyS0\0" \ 687 "ramdiskaddr=2000000\0" \ 688 "ramdiskfile=8536ds/ramdisk.uboot\0" \ 689 "fdtaddr=1e00000\0" \ 690 "fdtfile=8536ds/mpc8536ds.dtb\0" \ 691 "bdev=sda3\0" \ 692 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 693 694 #define CONFIG_HDBOOT \ 695 "setenv bootargs root=/dev/$bdev rw " \ 696 "console=$consoledev,$baudrate $othbootargs;" \ 697 "tftp $loadaddr $bootfile;" \ 698 "tftp $fdtaddr $fdtfile;" \ 699 "bootm $loadaddr - $fdtaddr" 700 701 #define CONFIG_NFSBOOTCOMMAND \ 702 "setenv bootargs root=/dev/nfs rw " \ 703 "nfsroot=$serverip:$rootpath " \ 704 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 705 "console=$consoledev,$baudrate $othbootargs;" \ 706 "tftp $loadaddr $bootfile;" \ 707 "tftp $fdtaddr $fdtfile;" \ 708 "bootm $loadaddr - $fdtaddr" 709 710 #define CONFIG_RAMBOOTCOMMAND \ 711 "setenv bootargs root=/dev/ram rw " \ 712 "console=$consoledev,$baudrate $othbootargs;" \ 713 "tftp $ramdiskaddr $ramdiskfile;" \ 714 "tftp $loadaddr $bootfile;" \ 715 "tftp $fdtaddr $fdtfile;" \ 716 "bootm $loadaddr $ramdiskaddr $fdtaddr" 717 718 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 719 720 #endif /* __CONFIG_H */ 721