1 /* 2 * Copyright 2007-2009,2010-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * mpc8536ds board configuration file 9 * 10 */ 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #include "../board/freescale/common/ics307_clk.h" 15 16 #ifdef CONFIG_SDCARD 17 #define CONFIG_RAMBOOT_SDCARD 1 18 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 19 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 20 #endif 21 22 #ifdef CONFIG_SPIFLASH 23 #define CONFIG_RAMBOOT_SPIFLASH 1 24 #define CONFIG_SYS_TEXT_BASE 0xf8f40000 25 #define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc 26 #endif 27 28 #ifndef CONFIG_SYS_TEXT_BASE 29 #define CONFIG_SYS_TEXT_BASE 0xeff40000 30 #endif 31 32 #ifndef CONFIG_RESET_VECTOR_ADDRESS 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 34 #endif 35 36 #ifndef CONFIG_SYS_MONITOR_BASE 37 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 38 #endif 39 40 #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ 41 #define CONFIG_PCIE1 1 /* PCIE controller 1 (slot 1) */ 42 #define CONFIG_PCIE2 1 /* PCIE controller 2 (slot 2) */ 43 #define CONFIG_PCIE3 1 /* PCIE controller 3 (ULI bridge) */ 44 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 45 #define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */ 46 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 47 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 48 49 50 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 51 #define CONFIG_ENV_OVERWRITE 52 53 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 54 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 55 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 56 57 /* 58 * These can be toggled for performance analysis, otherwise use default. 59 */ 60 #define CONFIG_L2_CACHE /* toggle L2 cache */ 61 #define CONFIG_BTB /* toggle branch predition */ 62 63 #define CONFIG_ENABLE_36BIT_PHYS 1 64 65 #ifdef CONFIG_PHYS_64BIT 66 #define CONFIG_ADDR_MAP 1 67 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 68 #endif 69 70 #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ 71 #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ 72 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 73 74 /* 75 * Config the L2 Cache as L2 SRAM 76 */ 77 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 78 #ifdef CONFIG_PHYS_64BIT 79 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull 80 #else 81 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 82 #endif 83 #define CONFIG_SYS_L2_SIZE (512 << 10) 84 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 85 86 #define CONFIG_SYS_CCSRBAR 0xffe00000 87 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 88 89 #if defined(CONFIG_NAND_SPL) 90 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 91 #endif 92 93 /* DDR Setup */ 94 #define CONFIG_VERY_BIG_RAM 95 #undef CONFIG_FSL_DDR_INTERACTIVE 96 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 97 #define CONFIG_DDR_SPD 98 99 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 100 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 101 102 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 103 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 104 105 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 106 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 107 108 /* I2C addresses of SPD EEPROMs */ 109 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 110 #define CONFIG_SYS_SPD_BUS_NUM 1 111 112 /* These are used when DDR doesn't use SPD. */ 113 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 114 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 115 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 116 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 117 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 118 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 119 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 120 #define CONFIG_SYS_DDR_MODE_1 0x00480432 121 #define CONFIG_SYS_DDR_MODE_2 0x00000000 122 #define CONFIG_SYS_DDR_INTERVAL 0x06180100 123 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 124 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 125 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 126 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 127 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ 128 #define CONFIG_SYS_DDR_CONTROL2 0x04400010 129 130 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 131 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 132 #define CONFIG_SYS_DDR_SBE 0x00010000 133 134 /* Make sure required options are set */ 135 #ifndef CONFIG_SPD_EEPROM 136 #error ("CONFIG_SPD_EEPROM is required") 137 #endif 138 139 #undef CONFIG_CLOCKS_IN_MHZ 140 141 /* 142 * Memory map -- xxx -this is wrong, needs updating 143 * 144 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 145 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 146 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 147 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 148 * 149 * Localbus cacheable (TBD) 150 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 151 * 152 * Localbus non-cacheable 153 * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable 154 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 155 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 156 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 157 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 158 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 159 */ 160 161 /* 162 * Local Bus Definitions 163 */ 164 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 165 #ifdef CONFIG_PHYS_64BIT 166 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 167 #else 168 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 169 #endif 170 171 #define CONFIG_FLASH_BR_PRELIM \ 172 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V) 173 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 174 175 #define CONFIG_SYS_BR1_PRELIM \ 176 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 177 | BR_PS_16 | BR_V) 178 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 179 180 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \ 181 CONFIG_SYS_FLASH_BASE_PHYS } 182 #define CONFIG_SYS_FLASH_QUIET_TEST 183 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 184 185 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 186 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 187 #undef CONFIG_SYS_FLASH_CHECKSUM 188 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 189 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 190 191 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) 192 #define CONFIG_SYS_RAMBOOT 193 #define CONFIG_SYS_EXTRA_ENV_RELOC 194 #else 195 #undef CONFIG_SYS_RAMBOOT 196 #endif 197 198 #define CONFIG_FLASH_CFI_DRIVER 199 #define CONFIG_SYS_FLASH_CFI 200 #define CONFIG_SYS_FLASH_EMPTY_INFO 201 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 202 203 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 204 205 #define CONFIG_HWCONFIG /* enable hwconfig */ 206 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 207 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 208 #ifdef CONFIG_PHYS_64BIT 209 #define PIXIS_BASE_PHYS 0xfffdf0000ull 210 #else 211 #define PIXIS_BASE_PHYS PIXIS_BASE 212 #endif 213 214 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 215 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 216 217 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 218 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 219 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 220 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 221 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 222 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 223 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 224 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 225 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 226 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 227 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 228 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 229 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 230 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 231 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 232 #define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */ 233 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 234 #define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */ 235 #define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */ 236 #define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */ 237 #define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */ 238 #define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */ 239 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 240 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 241 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 242 #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ 243 #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ 244 #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ 245 #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ 246 #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ 247 #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ 248 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 249 #define PIXIS_LED 0x25 /* LED Register */ 250 251 #define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */ 252 253 /* old pixis referenced names */ 254 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 255 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 256 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x4e 257 258 #define CONFIG_SYS_INIT_RAM_LOCK 1 259 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 260 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 261 262 #define CONFIG_SYS_GBL_DATA_OFFSET \ 263 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 264 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 265 266 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 267 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 268 269 #ifndef CONFIG_NAND_SPL 270 #define CONFIG_SYS_NAND_BASE 0xffa00000 271 #ifdef CONFIG_PHYS_64BIT 272 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 273 #else 274 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 275 #endif 276 #else 277 #define CONFIG_SYS_NAND_BASE 0xfff00000 278 #ifdef CONFIG_PHYS_64BIT 279 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull 280 #else 281 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 282 #endif 283 #endif 284 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 285 CONFIG_SYS_NAND_BASE + 0x40000, \ 286 CONFIG_SYS_NAND_BASE + 0x80000, \ 287 CONFIG_SYS_NAND_BASE + 0xC0000} 288 #define CONFIG_SYS_MAX_NAND_DEVICE 4 289 #define CONFIG_NAND_FSL_ELBC 1 290 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 291 292 /* NAND boot: 4K NAND loader config */ 293 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 294 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 295 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 296 #define CONFIG_SYS_NAND_U_BOOT_START \ 297 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 298 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 299 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 300 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 301 302 /* NAND flash config */ 303 #define CONFIG_SYS_NAND_BR_PRELIM \ 304 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 305 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 306 | BR_PS_8 /* Port Size = 8 bit */ \ 307 | BR_MS_FCM /* MSEL = FCM */ \ 308 | BR_V) /* valid */ 309 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 310 | OR_FCM_PGS /* Large Page*/ \ 311 | OR_FCM_CSCT \ 312 | OR_FCM_CST \ 313 | OR_FCM_CHT \ 314 | OR_FCM_SCY_1 \ 315 | OR_FCM_TRLX \ 316 | OR_FCM_EHTR) 317 318 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 319 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 320 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 321 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 322 323 #define CONFIG_SYS_BR4_PRELIM \ 324 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \ 325 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 326 | BR_PS_8 /* Port Size = 8 bit */ \ 327 | BR_MS_FCM /* MSEL = FCM */ \ 328 | BR_V) /* valid */ 329 #define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 330 #define CONFIG_SYS_BR5_PRELIM \ 331 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \ 332 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 333 | BR_PS_8 /* Port Size = 8 bit */ \ 334 | BR_MS_FCM /* MSEL = FCM */ \ 335 | BR_V) /* valid */ 336 #define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 337 338 #define CONFIG_SYS_BR6_PRELIM \ 339 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \ 340 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 341 | BR_PS_8 /* Port Size = 8 bit */ \ 342 | BR_MS_FCM /* MSEL = FCM */ \ 343 | BR_V) /* valid */ 344 #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 345 346 /* Serial Port - controlled on board with jumper J8 347 * open - index 2 348 * shorted - index 1 349 */ 350 #define CONFIG_CONS_INDEX 1 351 #define CONFIG_SYS_NS16550_SERIAL 352 #define CONFIG_SYS_NS16550_REG_SIZE 1 353 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 354 #ifdef CONFIG_NAND_SPL 355 #define CONFIG_NS16550_MIN_FUNCTIONS 356 #endif 357 358 #define CONFIG_SYS_BAUDRATE_TABLE \ 359 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 360 361 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 362 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 363 364 /* 365 * I2C 366 */ 367 #define CONFIG_SYS_I2C 368 #define CONFIG_SYS_I2C_FSL 369 #define CONFIG_SYS_FSL_I2C_SPEED 400000 370 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 371 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 372 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 373 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 374 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 375 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } 376 377 /* 378 * I2C2 EEPROM 379 */ 380 #define CONFIG_ID_EEPROM 381 #ifdef CONFIG_ID_EEPROM 382 #define CONFIG_SYS_I2C_EEPROM_NXID 383 #endif 384 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 385 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 386 #define CONFIG_SYS_EEPROM_BUS_NUM 1 387 388 /* 389 * eSPI - Enhanced SPI 390 */ 391 #define CONFIG_HARD_SPI 392 393 #if defined(CONFIG_SPI_FLASH) 394 #define CONFIG_SF_DEFAULT_SPEED 10000000 395 #define CONFIG_SF_DEFAULT_MODE 0 396 #endif 397 398 /* 399 * General PCI 400 * Memory space is mapped 1-1, but I/O space must start from 0. 401 */ 402 403 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 404 #ifdef CONFIG_PHYS_64BIT 405 #define CONFIG_SYS_PCI1_MEM_BUS 0xf0000000 406 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull 407 #else 408 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 409 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 410 #endif 411 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 412 #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 413 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 414 #ifdef CONFIG_PHYS_64BIT 415 #define CONFIG_SYS_PCI1_IO_PHYS 0xfffc00000ull 416 #else 417 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 418 #endif 419 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ 420 421 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 422 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 423 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 424 #ifdef CONFIG_PHYS_64BIT 425 #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000 426 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc10000000ull 427 #else 428 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 429 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 430 #endif 431 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ 432 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000 433 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 434 #ifdef CONFIG_PHYS_64BIT 435 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc10000ull 436 #else 437 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 438 #endif 439 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 440 441 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 442 #define CONFIG_SYS_PCIE2_NAME "Slot 2" 443 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 444 #ifdef CONFIG_PHYS_64BIT 445 #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000 446 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc18000000ull 447 #else 448 #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000 449 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000 450 #endif 451 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ 452 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 453 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 454 #ifdef CONFIG_PHYS_64BIT 455 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc20000ull 456 #else 457 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 458 #endif 459 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 460 461 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 462 #define CONFIG_SYS_PCIE3_NAME "Slot 3" 463 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 464 #ifdef CONFIG_PHYS_64BIT 465 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 466 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 467 #else 468 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 469 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 470 #endif 471 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 472 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000 473 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 474 #ifdef CONFIG_PHYS_64BIT 475 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc30000ull 476 #else 477 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 478 #endif 479 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 480 481 #if defined(CONFIG_PCI) 482 /*PCIE video card used*/ 483 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT 484 485 /*PCI video card used*/ 486 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ 487 488 /* video */ 489 490 #if defined(CONFIG_VIDEO) 491 #define CONFIG_BIOSEMU 492 #define CONFIG_ATI_RADEON_FB 493 #define CONFIG_VIDEO_LOGO 494 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT 495 #endif 496 497 #undef CONFIG_EEPRO100 498 #undef CONFIG_TULIP 499 500 #ifndef CONFIG_PCI_PNP 501 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS 502 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS 503 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 504 #endif 505 506 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 507 508 #endif /* CONFIG_PCI */ 509 510 /* SATA */ 511 #define CONFIG_LIBATA 512 #define CONFIG_FSL_SATA 513 514 #define CONFIG_SYS_SATA_MAX_DEVICE 2 515 #define CONFIG_SATA1 516 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 517 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 518 #define CONFIG_SATA2 519 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 520 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 521 522 #ifdef CONFIG_FSL_SATA 523 #define CONFIG_LBA48 524 #endif 525 526 #if defined(CONFIG_TSEC_ENET) 527 528 #define CONFIG_MII 1 /* MII PHY management */ 529 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 530 #define CONFIG_TSEC1 1 531 #define CONFIG_TSEC1_NAME "eTSEC1" 532 #define CONFIG_TSEC3 1 533 #define CONFIG_TSEC3_NAME "eTSEC3" 534 535 #define CONFIG_FSL_SGMII_RISER 1 536 #define SGMII_RISER_PHY_OFFSET 0x1c 537 538 #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ 539 #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ 540 541 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 542 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 543 544 #define TSEC1_PHYIDX 0 545 #define TSEC3_PHYIDX 0 546 547 #define CONFIG_ETHPRIME "eTSEC1" 548 549 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 550 551 #endif /* CONFIG_TSEC_ENET */ 552 553 /* 554 * Environment 555 */ 556 557 #if defined(CONFIG_SYS_RAMBOOT) 558 #if defined(CONFIG_RAMBOOT_SPIFLASH) 559 #define CONFIG_ENV_SPI_BUS 0 560 #define CONFIG_ENV_SPI_CS 0 561 #define CONFIG_ENV_SPI_MAX_HZ 10000000 562 #define CONFIG_ENV_SPI_MODE 0 563 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 564 #define CONFIG_ENV_OFFSET 0xF0000 565 #define CONFIG_ENV_SECT_SIZE 0x10000 566 #elif defined(CONFIG_RAMBOOT_SDCARD) 567 #define CONFIG_FSL_FIXED_MMC_LOCATION 568 #define CONFIG_ENV_SIZE 0x2000 569 #define CONFIG_SYS_MMC_ENV_DEV 0 570 #else 571 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 572 #define CONFIG_ENV_SIZE 0x2000 573 #endif 574 #else 575 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 576 #define CONFIG_ENV_SIZE 0x2000 577 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 578 #endif 579 580 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 581 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 582 583 /* 584 * Command line configuration. 585 */ 586 #define CONFIG_CMD_REGINFO 587 588 #if defined(CONFIG_PCI) 589 #define CONFIG_CMD_PCI 590 #endif 591 592 #undef CONFIG_WATCHDOG /* watchdog disabled */ 593 594 #ifdef CONFIG_MMC 595 #define CONFIG_FSL_ESDHC 596 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 597 #endif 598 599 /* 600 * USB 601 */ 602 #define CONFIG_HAS_FSL_MPH_USB 603 #ifdef CONFIG_HAS_FSL_MPH_USB 604 #ifdef CONFIG_USB_EHCI_HCD 605 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 606 #define CONFIG_USB_EHCI_FSL 607 #endif 608 #endif 609 610 /* 611 * Miscellaneous configurable options 612 */ 613 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 614 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 615 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 616 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 617 #if defined(CONFIG_CMD_KGDB) 618 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 619 #else 620 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 621 #endif 622 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 623 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ 624 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 625 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 626 627 /* 628 * For booting Linux, the board info and command line data 629 * have to be in the first 64 MB of memory, since this is 630 * the maximum mapped by the Linux kernel during initialization. 631 */ 632 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 633 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 634 635 #if defined(CONFIG_CMD_KGDB) 636 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 637 #endif 638 639 /* 640 * Environment Configuration 641 */ 642 643 /* The mac addresses for all ethernet interface */ 644 #if defined(CONFIG_TSEC_ENET) 645 #define CONFIG_HAS_ETH0 646 #define CONFIG_HAS_ETH1 647 #define CONFIG_HAS_ETH2 648 #define CONFIG_HAS_ETH3 649 #endif 650 651 #define CONFIG_IPADDR 192.168.1.254 652 653 #define CONFIG_HOSTNAME unknown 654 #define CONFIG_ROOTPATH "/opt/nfsroot" 655 #define CONFIG_BOOTFILE "uImage" 656 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 657 658 #define CONFIG_SERVERIP 192.168.1.1 659 #define CONFIG_GATEWAYIP 192.168.1.1 660 #define CONFIG_NETMASK 255.255.255.0 661 662 /* default location for tftp and bootm */ 663 #define CONFIG_LOADADDR 1000000 664 665 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 666 667 #define CONFIG_EXTRA_ENV_SETTINGS \ 668 "netdev=eth0\0" \ 669 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 670 "tftpflash=tftpboot $loadaddr $uboot; " \ 671 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 672 " +$filesize; " \ 673 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 674 " +$filesize; " \ 675 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 676 " $filesize; " \ 677 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 678 " +$filesize; " \ 679 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 680 " $filesize\0" \ 681 "consoledev=ttyS0\0" \ 682 "ramdiskaddr=2000000\0" \ 683 "ramdiskfile=8536ds/ramdisk.uboot\0" \ 684 "fdtaddr=1e00000\0" \ 685 "fdtfile=8536ds/mpc8536ds.dtb\0" \ 686 "bdev=sda3\0" \ 687 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 688 689 #define CONFIG_HDBOOT \ 690 "setenv bootargs root=/dev/$bdev rw " \ 691 "console=$consoledev,$baudrate $othbootargs;" \ 692 "tftp $loadaddr $bootfile;" \ 693 "tftp $fdtaddr $fdtfile;" \ 694 "bootm $loadaddr - $fdtaddr" 695 696 #define CONFIG_NFSBOOTCOMMAND \ 697 "setenv bootargs root=/dev/nfs rw " \ 698 "nfsroot=$serverip:$rootpath " \ 699 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 700 "console=$consoledev,$baudrate $othbootargs;" \ 701 "tftp $loadaddr $bootfile;" \ 702 "tftp $fdtaddr $fdtfile;" \ 703 "bootm $loadaddr - $fdtaddr" 704 705 #define CONFIG_RAMBOOTCOMMAND \ 706 "setenv bootargs root=/dev/ram rw " \ 707 "console=$consoledev,$baudrate $othbootargs;" \ 708 "tftp $ramdiskaddr $ramdiskfile;" \ 709 "tftp $loadaddr $bootfile;" \ 710 "tftp $fdtaddr $fdtfile;" \ 711 "bootm $loadaddr $ramdiskaddr $fdtaddr" 712 713 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 714 715 #endif /* __CONFIG_H */ 716