1 /* 2 * Copyright 2008-2009 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8536ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #ifdef CONFIG_MK_36BIT 31 #define CONFIG_PHYS_64BIT 1 32 #endif 33 34 #ifdef CONFIG_MK_NAND 35 #define CONFIG_NAND_U_BOOT 1 36 #define CONFIG_RAMBOOT_NAND 1 37 #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000 38 #endif 39 40 #ifdef CONFIG_MK_SDCARD 41 #define CONFIG_RAMBOOT_SDCARD 1 42 #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000 43 #endif 44 45 #ifdef CONFIG_MK_SPIFLASH 46 #define CONFIG_RAMBOOT_SPIFLASH 1 47 #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f80000 48 #endif 49 50 /* High Level Configuration Options */ 51 #define CONFIG_BOOKE 1 /* BOOKE */ 52 #define CONFIG_E500 1 /* BOOKE e500 family */ 53 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 54 #define CONFIG_MPC8536 1 55 #define CONFIG_MPC8536DS 1 56 57 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ 58 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 59 #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ 60 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 61 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 62 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 63 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 64 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 65 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 66 67 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 68 #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ 69 70 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 71 #define CONFIG_ENV_OVERWRITE 72 73 #ifndef __ASSEMBLY__ 74 extern unsigned long get_board_sys_clk(unsigned long dummy); 75 extern unsigned long get_board_ddr_clk(unsigned long dummy); 76 #endif 77 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 78 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) 79 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 80 #define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq 81 from ICS307 instead of switches */ 82 83 /* 84 * These can be toggled for performance analysis, otherwise use default. 85 */ 86 #define CONFIG_L2_CACHE /* toggle L2 cache */ 87 #define CONFIG_BTB /* toggle branch predition */ 88 89 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 90 91 #define CONFIG_ENABLE_36BIT_PHYS 1 92 93 #ifdef CONFIG_PHYS_64BIT 94 #define CONFIG_ADDR_MAP 1 95 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 96 #endif 97 98 #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ 99 #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ 100 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 101 102 /* 103 * Config the L2 Cache as L2 SRAM 104 */ 105 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 106 #ifdef CONFIG_PHYS_64BIT 107 #define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull 108 #else 109 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 110 #endif 111 #define CONFIG_SYS_L2_SIZE (512 << 10) 112 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 113 114 /* 115 * Base addresses -- Note these are effective addresses where the 116 * actual resources get mapped (not physical addresses) 117 */ 118 #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ 119 #ifdef CONFIG_PHYS_64BIT 120 #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */ 121 #else 122 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR 123 #endif 124 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 125 126 #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL) 127 #define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR 128 #else 129 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 130 #endif 131 132 #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) 133 #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0xa000) 134 #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) 135 #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR + 0xb000) 136 137 /* DDR Setup */ 138 #define CONFIG_VERY_BIG_RAM 139 #define CONFIG_FSL_DDR2 140 #undef CONFIG_FSL_DDR_INTERACTIVE 141 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 142 #define CONFIG_DDR_SPD 143 #undef CONFIG_DDR_DLL 144 145 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 146 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 147 148 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 149 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 150 151 #define CONFIG_NUM_DDR_CONTROLLERS 1 152 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 153 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 154 155 /* I2C addresses of SPD EEPROMs */ 156 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 157 #define CONFIG_SYS_SPD_BUS_NUM 1 158 159 /* These are used when DDR doesn't use SPD. */ 160 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 161 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 162 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 163 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 164 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 165 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 166 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 167 #define CONFIG_SYS_DDR_MODE_1 0x00480432 168 #define CONFIG_SYS_DDR_MODE_2 0x00000000 169 #define CONFIG_SYS_DDR_INTERVAL 0x06180100 170 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 171 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 172 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 173 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 174 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ 175 #define CONFIG_SYS_DDR_CONTROL2 0x04400010 176 177 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 178 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 179 #define CONFIG_SYS_DDR_SBE 0x00010000 180 181 /* Make sure required options are set */ 182 #ifndef CONFIG_SPD_EEPROM 183 #error ("CONFIG_SPD_EEPROM is required") 184 #endif 185 186 #undef CONFIG_CLOCKS_IN_MHZ 187 188 189 /* 190 * Memory map -- xxx -this is wrong, needs updating 191 * 192 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 193 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 194 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 195 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 196 * 197 * Localbus cacheable (TBD) 198 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 199 * 200 * Localbus non-cacheable 201 * 0xe000_0000 0xe7ff_ffff Promjet/free 128M non-cacheable 202 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 203 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 204 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 205 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 206 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 207 */ 208 209 /* 210 * Local Bus Definitions 211 */ 212 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 213 #ifdef CONFIG_PHYS_64BIT 214 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 215 #else 216 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 217 #endif 218 219 #define CONFIG_FLASH_BR_PRELIM \ 220 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ 221 | BR_PS_16 | BR_V) 222 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 223 224 #define CONFIG_SYS_BR1_PRELIM \ 225 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ 226 | BR_PS_16 | BR_V) 227 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 228 229 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, \ 230 CONFIG_SYS_FLASH_BASE_PHYS } 231 #define CONFIG_SYS_FLASH_QUIET_TEST 232 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 233 234 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 235 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 236 #undef CONFIG_SYS_FLASH_CHECKSUM 237 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 238 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 239 240 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 241 242 #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \ 243 || defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) 244 #define CONFIG_SYS_RAMBOOT 245 #else 246 #undef CONFIG_SYS_RAMBOOT 247 #endif 248 249 #define CONFIG_FLASH_CFI_DRIVER 250 #define CONFIG_SYS_FLASH_CFI 251 #define CONFIG_SYS_FLASH_EMPTY_INFO 252 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 253 254 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 255 256 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 257 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 258 #ifdef CONFIG_PHYS_64BIT 259 #define PIXIS_BASE_PHYS 0xfffdf0000ull 260 #else 261 #define PIXIS_BASE_PHYS PIXIS_BASE 262 #endif 263 264 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 265 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 266 267 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 268 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 269 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 270 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 271 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 272 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 273 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 274 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 275 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 276 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 277 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 278 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 279 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 280 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 281 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 282 #define PIXIS_VBOOT_LBMAP 0xe0 /* VBOOT - CFG_LBMAP */ 283 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 284 #define PIXIS_VBOOT_LBMAP_NOR1 0x01 /* cfg_lbmap - boot from NOR 1 */ 285 #define PIXIS_VBOOT_LBMAP_NOR2 0x02 /* cfg_lbmap - boot from NOR 2 */ 286 #define PIXIS_VBOOT_LBMAP_NOR3 0x03 /* cfg_lbmap - boot from NOR 3 */ 287 #define PIXIS_VBOOT_LBMAP_PJET 0x04 /* cfg_lbmap - boot from projet */ 288 #define PIXIS_VBOOT_LBMAP_NAND 0x05 /* cfg_lbmap - boot from NAND */ 289 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 290 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 291 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 292 #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ 293 #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ 294 #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ 295 #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ 296 #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ 297 #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ 298 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 299 #define PIXIS_LED 0x25 /* LED Register */ 300 301 #define PIXIS_SPD_SYSCLK 0x7 /* SYSCLK option */ 302 303 /* old pixis referenced names */ 304 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 305 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 306 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 307 308 #define CONFIG_SYS_INIT_RAM_LOCK 1 309 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 310 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 311 312 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 313 #define CONFIG_SYS_GBL_DATA_OFFSET \ 314 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 315 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 316 317 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 318 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 319 320 #ifndef CONFIG_NAND_SPL 321 #define CONFIG_SYS_NAND_BASE 0xffa00000 322 #ifdef CONFIG_PHYS_64BIT 323 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 324 #else 325 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 326 #endif 327 #else 328 #define CONFIG_SYS_NAND_BASE 0xfff00000 329 #ifdef CONFIG_PHYS_64BIT 330 #define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull 331 #else 332 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 333 #endif 334 #endif 335 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 336 CONFIG_SYS_NAND_BASE + 0x40000, \ 337 CONFIG_SYS_NAND_BASE + 0x80000, \ 338 CONFIG_SYS_NAND_BASE + 0xC0000} 339 #define CONFIG_SYS_MAX_NAND_DEVICE 4 340 #define CONFIG_MTD_NAND_VERIFY_WRITE 341 #define CONFIG_CMD_NAND 1 342 #define CONFIG_NAND_FSL_ELBC 1 343 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 344 345 /* NAND boot: 4K NAND loader config */ 346 #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 347 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 348 #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) 349 #define CONFIG_SYS_NAND_U_BOOT_START \ 350 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) 351 #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) 352 #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) 353 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 354 355 /* NAND flash config */ 356 #define CONFIG_NAND_BR_PRELIM \ 357 (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 358 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 359 | BR_PS_8 /* Port Size = 8 bit */ \ 360 | BR_MS_FCM /* MSEL = FCM */ \ 361 | BR_V) /* valid */ 362 #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 363 | OR_FCM_PGS /* Large Page*/ \ 364 | OR_FCM_CSCT \ 365 | OR_FCM_CST \ 366 | OR_FCM_CHT \ 367 | OR_FCM_SCY_1 \ 368 | OR_FCM_TRLX \ 369 | OR_FCM_EHTR) 370 371 #ifdef CONFIG_RAMBOOT_NAND 372 #define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ 373 #define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 374 #define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 375 #define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 376 #else 377 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ 378 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ 379 #define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ 380 #define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 381 #endif 382 383 #define CONFIG_SYS_BR4_PRELIM \ 384 (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)) \ 385 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 386 | BR_PS_8 /* Port Size = 8 bit */ \ 387 | BR_MS_FCM /* MSEL = FCM */ \ 388 | BR_V) /* valid */ 389 #define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 390 #define CONFIG_SYS_BR5_PRELIM \ 391 (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \ 392 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 393 | BR_PS_8 /* Port Size = 8 bit */ \ 394 | BR_MS_FCM /* MSEL = FCM */ \ 395 | BR_V) /* valid */ 396 #define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 397 398 #define CONFIG_SYS_BR6_PRELIM \ 399 (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \ 400 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 401 | BR_PS_8 /* Port Size = 8 bit */ \ 402 | BR_MS_FCM /* MSEL = FCM */ \ 403 | BR_V) /* valid */ 404 #define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 405 406 /* Serial Port - controlled on board with jumper J8 407 * open - index 2 408 * shorted - index 1 409 */ 410 #define CONFIG_CONS_INDEX 1 411 #undef CONFIG_SERIAL_SOFTWARE_FIFO 412 #define CONFIG_SYS_NS16550 413 #define CONFIG_SYS_NS16550_SERIAL 414 #define CONFIG_SYS_NS16550_REG_SIZE 1 415 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 416 417 #define CONFIG_SYS_BAUDRATE_TABLE \ 418 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 419 420 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 421 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 422 423 /* Use the HUSH parser */ 424 #define CONFIG_SYS_HUSH_PARSER 425 #ifdef CONFIG_SYS_HUSH_PARSER 426 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 427 #endif 428 429 /* 430 * Pass open firmware flat tree 431 */ 432 #define CONFIG_OF_LIBFDT 1 433 #define CONFIG_OF_BOARD_SETUP 1 434 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 435 436 /* 437 * I2C 438 */ 439 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 440 #define CONFIG_HARD_I2C /* I2C with hardware support */ 441 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 442 #define CONFIG_I2C_MULTI_BUS 443 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 444 #define CONFIG_SYS_I2C_SLAVE 0x7F 445 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */ 446 #define CONFIG_SYS_I2C_OFFSET 0x3000 447 #define CONFIG_SYS_I2C2_OFFSET 0x3100 448 449 /* 450 * I2C2 EEPROM 451 */ 452 #define CONFIG_ID_EEPROM 453 #ifdef CONFIG_ID_EEPROM 454 #define CONFIG_SYS_I2C_EEPROM_NXID 455 #endif 456 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 457 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 458 #define CONFIG_SYS_EEPROM_BUS_NUM 1 459 460 /* 461 * General PCI 462 * Memory space is mapped 1-1, but I/O space must start from 0. 463 */ 464 465 #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 466 #ifdef CONFIG_PHYS_64BIT 467 #define CONFIG_SYS_PCI1_MEM_BUS 0xf0000000 468 #define CONFIG_SYS_PCI1_MEM_PHYS 0xc00000000ull 469 #else 470 #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 471 #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 472 #endif 473 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 474 #define CONFIG_SYS_PCI1_IO_VIRT 0xffc00000 475 #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 476 #ifdef CONFIG_PHYS_64BIT 477 #define CONFIG_SYS_PCI1_IO_PHYS 0xfffc00000ull 478 #else 479 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 480 #endif 481 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ 482 483 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 484 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 485 #ifdef CONFIG_PHYS_64BIT 486 #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000 487 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc10000000ull 488 #else 489 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 490 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 491 #endif 492 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ 493 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc10000 494 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 495 #ifdef CONFIG_PHYS_64BIT 496 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc10000ull 497 #else 498 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 499 #endif 500 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 501 502 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 503 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 504 #ifdef CONFIG_PHYS_64BIT 505 #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000 506 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc18000000ull 507 #else 508 #define CONFIG_SYS_PCIE2_MEM_BUS 0x98000000 509 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x98000000 510 #endif 511 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ 512 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc20000 513 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 514 #ifdef CONFIG_PHYS_64BIT 515 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc20000ull 516 #else 517 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 518 #endif 519 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 520 521 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 522 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 523 #ifdef CONFIG_PHYS_64BIT 524 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 525 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 526 #else 527 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 528 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 529 #endif 530 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 531 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc30000 532 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 533 #ifdef CONFIG_PHYS_64BIT 534 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc30000ull 535 #else 536 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 537 #endif 538 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 539 540 #if defined(CONFIG_PCI) 541 542 #define CONFIG_NET_MULTI 543 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 544 545 /*PCIE video card used*/ 546 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_VIRT 547 548 /*PCI video card used*/ 549 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_VIRT*/ 550 551 /* video */ 552 #define CONFIG_VIDEO 553 554 #if defined(CONFIG_VIDEO) 555 #define CONFIG_BIOSEMU 556 #define CONFIG_CFB_CONSOLE 557 #define CONFIG_VIDEO_SW_CURSOR 558 #define CONFIG_VGA_AS_SINGLE_DEVICE 559 #define CONFIG_ATI_RADEON_FB 560 #define CONFIG_VIDEO_LOGO 561 /*#define CONFIG_CONSOLE_CURSOR*/ 562 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_VIRT 563 #endif 564 565 #undef CONFIG_EEPRO100 566 #undef CONFIG_TULIP 567 #undef CONFIG_RTL8139 568 569 #ifndef CONFIG_PCI_PNP 570 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS 571 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS 572 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 573 #endif 574 575 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 576 577 #endif /* CONFIG_PCI */ 578 579 /* SATA */ 580 #define CONFIG_LIBATA 581 #define CONFIG_FSL_SATA 582 583 #define CONFIG_SYS_SATA_MAX_DEVICE 2 584 #define CONFIG_SATA1 585 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 586 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 587 #define CONFIG_SATA2 588 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 589 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 590 591 #ifdef CONFIG_FSL_SATA 592 #define CONFIG_LBA48 593 #define CONFIG_CMD_SATA 594 #define CONFIG_DOS_PARTITION 595 #define CONFIG_CMD_EXT2 596 #endif 597 598 #if defined(CONFIG_TSEC_ENET) 599 600 #ifndef CONFIG_NET_MULTI 601 #define CONFIG_NET_MULTI 1 602 #endif 603 604 #define CONFIG_MII 1 /* MII PHY management */ 605 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 606 #define CONFIG_TSEC1 1 607 #define CONFIG_TSEC1_NAME "eTSEC1" 608 #define CONFIG_TSEC3 1 609 #define CONFIG_TSEC3_NAME "eTSEC3" 610 611 #define CONFIG_FSL_SGMII_RISER 1 612 #define SGMII_RISER_PHY_OFFSET 0x1c 613 614 #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ 615 #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ 616 617 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 618 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 619 620 #define TSEC1_PHYIDX 0 621 #define TSEC3_PHYIDX 0 622 623 #define CONFIG_ETHPRIME "eTSEC1" 624 625 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 626 627 #endif /* CONFIG_TSEC_ENET */ 628 629 /* 630 * Environment 631 */ 632 633 #if defined(CONFIG_SYS_RAMBOOT) 634 #if defined(CONFIG_RAMBOOT_NAND) 635 #define CONFIG_ENV_IS_IN_NAND 1 636 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 637 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 638 #elif defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) 639 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 640 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 641 #define CONFIG_ENV_SIZE 0x2000 642 #endif 643 #else 644 #define CONFIG_ENV_IS_IN_FLASH 1 645 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 646 #define CONFIG_ENV_ADDR 0xfff80000 647 #else 648 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 649 #endif 650 #define CONFIG_ENV_SIZE 0x2000 651 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 652 #endif 653 654 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 655 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 656 657 /* 658 * Command line configuration. 659 */ 660 #include <config_cmd_default.h> 661 662 #define CONFIG_CMD_IRQ 663 #define CONFIG_CMD_PING 664 #define CONFIG_CMD_I2C 665 #define CONFIG_CMD_MII 666 #define CONFIG_CMD_ELF 667 #define CONFIG_CMD_IRQ 668 #define CONFIG_CMD_SETEXPR 669 670 #if defined(CONFIG_PCI) 671 #define CONFIG_CMD_PCI 672 #define CONFIG_CMD_NET 673 #endif 674 675 #undef CONFIG_WATCHDOG /* watchdog disabled */ 676 677 #define CONFIG_MMC 1 678 679 #ifdef CONFIG_MMC 680 #define CONFIG_FSL_ESDHC 681 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 682 #define CONFIG_CMD_MMC 683 #define CONFIG_GENERIC_MMC 684 #define CONFIG_CMD_EXT2 685 #define CONFIG_CMD_FAT 686 #define CONFIG_DOS_PARTITION 687 #endif 688 689 /* 690 * Miscellaneous configurable options 691 */ 692 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 693 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 694 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 695 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 696 #if defined(CONFIG_CMD_KGDB) 697 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 698 #else 699 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 700 #endif 701 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ 702 + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ 703 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 704 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 705 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 706 707 /* 708 * For booting Linux, the board info and command line data 709 * have to be in the first 16 MB of memory, since this is 710 * the maximum mapped by the Linux kernel during initialization. 711 */ 712 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ 713 714 /* 715 * Internal Definitions 716 * 717 * Boot Flags 718 */ 719 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 720 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 721 722 #if defined(CONFIG_CMD_KGDB) 723 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 724 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 725 #endif 726 727 /* 728 * Environment Configuration 729 */ 730 731 /* The mac addresses for all ethernet interface */ 732 #if defined(CONFIG_TSEC_ENET) 733 #define CONFIG_HAS_ETH0 734 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 735 #define CONFIG_HAS_ETH1 736 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 737 #define CONFIG_HAS_ETH2 738 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 739 #define CONFIG_HAS_ETH3 740 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 741 #endif 742 743 #define CONFIG_IPADDR 192.168.1.254 744 745 #define CONFIG_HOSTNAME unknown 746 #define CONFIG_ROOTPATH /opt/nfsroot 747 #define CONFIG_BOOTFILE uImage 748 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 749 750 #define CONFIG_SERVERIP 192.168.1.1 751 #define CONFIG_GATEWAYIP 192.168.1.1 752 #define CONFIG_NETMASK 255.255.255.0 753 754 /* default location for tftp and bootm */ 755 #define CONFIG_LOADADDR 1000000 756 757 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 758 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 759 760 #define CONFIG_BAUDRATE 115200 761 762 #define CONFIG_EXTRA_ENV_SETTINGS \ 763 "netdev=eth0\0" \ 764 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 765 "tftpflash=tftpboot $loadaddr $uboot; " \ 766 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 767 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 768 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 769 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 770 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 771 "consoledev=ttyS0\0" \ 772 "ramdiskaddr=2000000\0" \ 773 "ramdiskfile=8536ds/ramdisk.uboot\0" \ 774 "fdtaddr=c00000\0" \ 775 "fdtfile=8536ds/mpc8536ds.dtb\0" \ 776 "bdev=sda3\0" \ 777 "usb_phy_type=ulpi\0" 778 779 #define CONFIG_HDBOOT \ 780 "setenv bootargs root=/dev/$bdev rw " \ 781 "console=$consoledev,$baudrate $othbootargs;" \ 782 "tftp $loadaddr $bootfile;" \ 783 "tftp $fdtaddr $fdtfile;" \ 784 "bootm $loadaddr - $fdtaddr" 785 786 #define CONFIG_NFSBOOTCOMMAND \ 787 "setenv bootargs root=/dev/nfs rw " \ 788 "nfsroot=$serverip:$rootpath " \ 789 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 790 "console=$consoledev,$baudrate $othbootargs;" \ 791 "tftp $loadaddr $bootfile;" \ 792 "tftp $fdtaddr $fdtfile;" \ 793 "bootm $loadaddr - $fdtaddr" 794 795 #define CONFIG_RAMBOOTCOMMAND \ 796 "setenv bootargs root=/dev/ram rw " \ 797 "console=$consoledev,$baudrate $othbootargs;" \ 798 "tftp $ramdiskaddr $ramdiskfile;" \ 799 "tftp $loadaddr $bootfile;" \ 800 "tftp $fdtaddr $fdtfile;" \ 801 "bootm $loadaddr $ramdiskaddr $fdtaddr" 802 803 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 804 805 #endif /* __CONFIG_H */ 806