1 /* 2 * Copyright (C) 2007 Freescale Semiconductor, Inc. 3 * Kevin Lam <kevin.lam@freescale.com> 4 * Joe D'Abbraccio <joe.d'abbraccio@freescale.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of 9 * the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #ifndef __CONFIG_H 23 #define __CONFIG_H 24 25 /* 26 * High Level Configuration Options 27 */ 28 #define CONFIG_E300 1 /* E300 family */ 29 #define CONFIG_MPC83xx 1 /* MPC83xx family */ 30 #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ 31 #define CONFIG_MPC837XERDB 1 32 33 #define CONFIG_PCI 1 34 35 #define CONFIG_BOARD_EARLY_INIT_F 36 #define CONFIG_MISC_INIT_R 37 #define CONFIG_HWCONFIG 38 39 /* 40 * On-board devices 41 */ 42 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 43 #define CONFIG_VSC7385_ENET 44 45 /* 46 * System Clock Setup 47 */ 48 #ifdef CONFIG_PCISLAVE 49 #define CONFIG_83XX_PCICLK 66666667 /* in HZ */ 50 #else 51 #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ 52 #define CONFIG_PCIE 53 #endif 54 55 #ifndef CONFIG_SYS_CLK_FREQ 56 #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN 57 #endif 58 59 /* 60 * Hardware Reset Configuration Word 61 */ 62 #define CONFIG_SYS_HRCW_LOW (\ 63 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 64 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 65 HRCWL_SVCOD_DIV_2 |\ 66 HRCWL_CSB_TO_CLKIN_5X1 |\ 67 HRCWL_CORE_TO_CSB_2X1) 68 69 #ifdef CONFIG_PCISLAVE 70 #define CONFIG_SYS_HRCW_HIGH (\ 71 HRCWH_PCI_AGENT |\ 72 HRCWH_PCI1_ARBITER_DISABLE |\ 73 HRCWH_CORE_ENABLE |\ 74 HRCWH_FROM_0XFFF00100 |\ 75 HRCWH_BOOTSEQ_DISABLE |\ 76 HRCWH_SW_WATCHDOG_DISABLE |\ 77 HRCWH_ROM_LOC_LOCAL_16BIT |\ 78 HRCWH_RL_EXT_LEGACY |\ 79 HRCWH_TSEC1M_IN_RGMII |\ 80 HRCWH_TSEC2M_IN_RGMII |\ 81 HRCWH_BIG_ENDIAN |\ 82 HRCWH_LDP_CLEAR) 83 #else 84 #define CONFIG_SYS_HRCW_HIGH (\ 85 HRCWH_PCI_HOST |\ 86 HRCWH_PCI1_ARBITER_ENABLE |\ 87 HRCWH_CORE_ENABLE |\ 88 HRCWH_FROM_0X00000100 |\ 89 HRCWH_BOOTSEQ_DISABLE |\ 90 HRCWH_SW_WATCHDOG_DISABLE |\ 91 HRCWH_ROM_LOC_LOCAL_16BIT |\ 92 HRCWH_RL_EXT_LEGACY |\ 93 HRCWH_TSEC1M_IN_RGMII |\ 94 HRCWH_TSEC2M_IN_RGMII |\ 95 HRCWH_BIG_ENDIAN |\ 96 HRCWH_LDP_CLEAR) 97 #endif 98 99 /* System performance - define the value i.e. CONFIG_SYS_XXX 100 */ 101 102 /* Arbiter Configuration Register */ 103 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 104 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 105 106 /* System Priority Control Regsiter */ 107 #define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1&2 emergency priority (0-3) */ 108 109 /* System Clock Configuration Register */ 110 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ 111 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ 112 #define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* SATA1-4 clock mode (0-3) */ 113 114 /* 115 * System IO Config 116 */ 117 #define CONFIG_SYS_SICRH 0x08200000 118 #define CONFIG_SYS_SICRL 0x00000000 119 120 /* 121 * Output Buffer Impedance 122 */ 123 #define CONFIG_SYS_OBIR 0x30100000 124 125 /* 126 * IMMR new address 127 */ 128 #define CONFIG_SYS_IMMR 0xE0000000 129 130 /* 131 * Device configurations 132 */ 133 134 /* Vitesse 7385 */ 135 136 #ifdef CONFIG_VSC7385_ENET 137 138 #define CONFIG_TSEC2 139 140 /* The flash address and size of the VSC7385 firmware image */ 141 #define CONFIG_VSC7385_IMAGE 0xFE7FE000 142 #define CONFIG_VSC7385_IMAGE_SIZE 8192 143 144 #endif 145 146 /* 147 * DDR Setup 148 */ 149 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ 150 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 151 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 152 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x03000000 153 #define CONFIG_SYS_83XX_DDR_USES_CS0 154 155 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN) 156 157 #undef CONFIG_DDR_ECC /* support DDR ECC function */ 158 #undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ 159 160 #undef CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ 161 162 /* 163 * Manually set up DDR parameters 164 */ 165 #define CONFIG_SYS_DDR_SIZE 256 /* MB */ 166 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f 167 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \ 168 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) 169 170 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 171 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ 172 | (0 << TIMING_CFG0_WRT_SHIFT) \ 173 | (0 << TIMING_CFG0_RRT_SHIFT) \ 174 | (0 << TIMING_CFG0_WWT_SHIFT) \ 175 | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ 176 | (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ 177 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ 178 | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) 179 /* 0x00220802 */ 180 /* 0x00260802 */ /* DDR400 */ 181 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ 182 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \ 183 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ 184 | (7 << TIMING_CFG1_CASLAT_SHIFT) \ 185 | (13 << TIMING_CFG1_REFREC_SHIFT) \ 186 | (3 << TIMING_CFG1_WRREC_SHIFT) \ 187 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ 188 | (2 << TIMING_CFG1_WRTORD_SHIFT)) 189 /* 0x3935d322 */ 190 /* 0x3937d322 */ 191 #define CONFIG_SYS_DDR_TIMING_2 0x02984cc8 192 193 #define CONFIG_SYS_DDR_INTERVAL ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \ 194 | (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) 195 /* 0x06090100 */ 196 197 #if defined(CONFIG_DDR_2T_TIMING) 198 #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ 199 | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \ 200 | SDRAM_CFG_2T_EN \ 201 | SDRAM_CFG_DBW_32) 202 #else 203 #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ 204 | 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT) 205 /* 0x43000000 */ 206 #endif 207 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ 208 #define CONFIG_SYS_DDR_MODE ((0x0406 << SDRAM_MODE_ESD_SHIFT) \ 209 | (0x0442 << SDRAM_MODE_SD_SHIFT)) 210 /* 0x04400442 */ /* DDR400 */ 211 #define CONFIG_SYS_DDR_MODE2 0x00000000 212 213 /* 214 * Memory test 215 */ 216 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 217 #define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest region */ 218 #define CONFIG_SYS_MEMTEST_END 0x0ef70010 219 220 /* 221 * The reserved memory 222 */ 223 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 224 225 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 226 #define CONFIG_SYS_RAMBOOT 227 #else 228 #undef CONFIG_SYS_RAMBOOT 229 #endif 230 231 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 232 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 233 234 /* 235 * Initial RAM Base Address Setup 236 */ 237 #define CONFIG_SYS_INIT_RAM_LOCK 1 238 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 239 #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */ 240 #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ 241 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 242 243 /* 244 * Local Bus Configuration & Clock Setup 245 */ 246 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 247 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 248 #define CONFIG_SYS_LBC_LBCR 0x00000000 249 250 /* 251 * FLASH on the Local Bus 252 */ 253 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 254 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 255 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ 256 #define CONFIG_SYS_FLASH_SIZE 8 /* max FLASH size is 32M */ 257 258 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 259 #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ 260 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ 261 262 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */ 263 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ 264 265 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | /* Flash Base address */ \ 266 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ 267 BR_V) /* valid */ 268 #define CONFIG_SYS_OR0_PRELIM (0xFF800000 /* 8 MByte */ \ 269 | OR_GPCM_XACS \ 270 | OR_GPCM_SCY_9 \ 271 | OR_GPCM_EHTR \ 272 | OR_GPCM_EAD) 273 /* 0xFF806FF7 TODO SLOW 8 MB flash size */ 274 275 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 276 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ 277 278 #undef CONFIG_SYS_FLASH_CHECKSUM 279 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 280 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 281 282 /* 283 * NAND Flash on the Local Bus 284 */ 285 #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ 286 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE | \ 287 (2 << BR_DECC_SHIFT) | /* Use HW ECC */ \ 288 BR_PS_8 | /* Port Size = 8 bit */ \ 289 BR_MS_FCM | /* MSEL = FCM */ \ 290 BR_V) /* valid */ 291 #define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 | /* length 32K */ \ 292 OR_FCM_CSCT | \ 293 OR_FCM_CST | \ 294 OR_FCM_CHT | \ 295 OR_FCM_SCY_1 | \ 296 OR_FCM_TRLX | \ 297 OR_FCM_EHTR) 298 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE 299 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ 300 301 /* Vitesse 7385 */ 302 303 #define CONFIG_SYS_VSC7385_BASE 0xF0000000 304 305 #ifdef CONFIG_VSC7385_ENET 306 307 #define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* Base address */ 308 #define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* 128K bytes*/ 309 #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE /* Access Base */ 310 #define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */ 311 312 #endif 313 314 /* 315 * Serial Port 316 */ 317 #define CONFIG_CONS_INDEX 1 318 #undef CONFIG_SERIAL_SOFTWARE_FIFO 319 #define CONFIG_SYS_NS16550 320 #define CONFIG_SYS_NS16550_SERIAL 321 #define CONFIG_SYS_NS16550_REG_SIZE 1 322 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 323 324 #define CONFIG_SYS_BAUDRATE_TABLE \ 325 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 326 327 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 328 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 329 330 /* SERDES */ 331 #define CONFIG_FSL_SERDES 332 #define CONFIG_FSL_SERDES1 0xe3000 333 #define CONFIG_FSL_SERDES2 0xe3100 334 335 /* Use the HUSH parser */ 336 #define CONFIG_SYS_HUSH_PARSER 337 #ifdef CONFIG_SYS_HUSH_PARSER 338 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 339 #endif 340 341 /* Pass open firmware flat tree */ 342 #define CONFIG_OF_LIBFDT 1 343 #define CONFIG_OF_BOARD_SETUP 1 344 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 345 346 /* I2C */ 347 #define CONFIG_HARD_I2C /* I2C with hardware support */ 348 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 349 #define CONFIG_FSL_I2C 350 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 351 #define CONFIG_SYS_I2C_SLAVE 0x7F 352 #define CONFIG_SYS_I2C_NOPROBES {0x51} /* Don't probe these addrs */ 353 #define CONFIG_SYS_I2C_OFFSET 0x3000 354 #define CONFIG_SYS_I2C2_OFFSET 0x3100 355 356 /* 357 * Config on-board RTC 358 */ 359 #define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ 360 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 361 362 /* 363 * General PCI 364 * Addresses are mapped 1-1. 365 */ 366 #define CONFIG_SYS_PCI_MEM_BASE 0x80000000 367 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE 368 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ 369 #define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 370 #define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE 371 #define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ 372 #define CONFIG_SYS_PCI_IO_BASE 0x00000000 373 #define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 374 #define CONFIG_SYS_PCI_IO_SIZE 0x100000 /* 1M */ 375 376 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE 377 #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 378 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 379 380 #define CONFIG_SYS_PCIE1_BASE 0xA0000000 381 #define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 382 #define CONFIG_SYS_PCIE1_CFG_SIZE 0x08000000 383 #define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 384 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 385 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 386 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 387 #define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 388 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 389 390 #define CONFIG_SYS_PCIE2_BASE 0xC0000000 391 #define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 392 #define CONFIG_SYS_PCIE2_CFG_SIZE 0x08000000 393 #define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 394 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 395 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 396 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 397 #define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 398 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 399 400 #ifdef CONFIG_PCI 401 #define CONFIG_NET_MULTI 402 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 403 404 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 405 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 406 #endif /* CONFIG_PCI */ 407 408 /* 409 * TSEC 410 */ 411 #ifdef CONFIG_TSEC_ENET 412 413 #define CONFIG_NET_MULTI 414 #define CONFIG_GMII /* MII PHY management */ 415 416 #define CONFIG_TSEC1 417 418 #ifdef CONFIG_TSEC1 419 #define CONFIG_HAS_ETH0 420 #define CONFIG_TSEC1_NAME "TSEC0" 421 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 422 #define TSEC1_PHY_ADDR 2 423 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 424 #define TSEC1_PHYIDX 0 425 #endif 426 427 #ifdef CONFIG_TSEC2 428 #define CONFIG_HAS_ETH1 429 #define CONFIG_TSEC2_NAME "TSEC1" 430 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 431 #define TSEC2_PHY_ADDR 0x1c 432 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 433 #define TSEC2_PHYIDX 0 434 #endif 435 436 /* Options are: TSEC[0-1] */ 437 #define CONFIG_ETHPRIME "TSEC0" 438 439 #endif 440 441 /* 442 * SATA 443 */ 444 #define CONFIG_LIBATA 445 #define CONFIG_FSL_SATA 446 447 #define CONFIG_SYS_SATA_MAX_DEVICE 2 448 #define CONFIG_SATA1 449 #define CONFIG_SYS_SATA1_OFFSET 0x18000 450 #define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) 451 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 452 #define CONFIG_SATA2 453 #define CONFIG_SYS_SATA2_OFFSET 0x19000 454 #define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) 455 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 456 457 #ifdef CONFIG_FSL_SATA 458 #define CONFIG_LBA48 459 #define CONFIG_CMD_SATA 460 #define CONFIG_DOS_PARTITION 461 #define CONFIG_CMD_EXT2 462 #endif 463 464 /* 465 * Environment 466 */ 467 #ifndef CONFIG_SYS_RAMBOOT 468 #define CONFIG_ENV_IS_IN_FLASH 1 469 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN) 470 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for env */ 471 #define CONFIG_ENV_SIZE 0x4000 472 #else 473 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 474 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 475 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-0x1000) 476 #define CONFIG_ENV_SIZE 0x2000 477 #endif 478 479 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 480 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 481 482 /* 483 * BOOTP options 484 */ 485 #define CONFIG_BOOTP_BOOTFILESIZE 486 #define CONFIG_BOOTP_BOOTPATH 487 #define CONFIG_BOOTP_GATEWAY 488 #define CONFIG_BOOTP_HOSTNAME 489 490 491 /* 492 * Command line configuration. 493 */ 494 #include <config_cmd_default.h> 495 496 #define CONFIG_CMD_PING 497 #define CONFIG_CMD_I2C 498 #define CONFIG_CMD_MII 499 #define CONFIG_CMD_DATE 500 501 #if defined(CONFIG_PCI) 502 #define CONFIG_CMD_PCI 503 #endif 504 505 #if defined(CONFIG_SYS_RAMBOOT) 506 #undef CONFIG_CMD_SAVEENV 507 #undef CONFIG_CMD_LOADS 508 #endif 509 510 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 511 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 512 513 #undef CONFIG_WATCHDOG /* watchdog disabled */ 514 515 #define CONFIG_MMC 1 516 517 #ifdef CONFIG_MMC 518 #define CONFIG_FSL_ESDHC 519 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR 520 #define CONFIG_CMD_MMC 521 #define CONFIG_GENERIC_MMC 522 #define CONFIG_CMD_EXT2 523 #define CONFIG_CMD_FAT 524 #define CONFIG_DOS_PARTITION 525 #endif 526 527 /* 528 * Miscellaneous configurable options 529 */ 530 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 531 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 532 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 533 534 #if defined(CONFIG_CMD_KGDB) 535 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 536 #else 537 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 538 #endif 539 540 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 541 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 542 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 543 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 544 545 /* 546 * For booting Linux, the board info and command line data 547 * have to be in the first 8 MB of memory, since this is 548 * the maximum mapped by the Linux kernel during initialization. 549 */ 550 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ 551 552 /* 553 * Core HID Setup 554 */ 555 #define CONFIG_SYS_HID0_INIT 0x000000000 556 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 557 HID0_ENABLE_INSTRUCTION_CACHE) 558 #define CONFIG_SYS_HID2 HID2_HBE 559 560 /* 561 * MMU Setup 562 */ 563 564 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 565 566 /* DDR: cache cacheable */ 567 #define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE 568 #define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000) 569 570 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE) 571 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP) 572 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 573 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 574 575 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE) 576 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP) 577 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 578 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 579 580 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ 581 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_10 | \ 582 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 583 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP) 584 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 585 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 586 587 /* L2 Switch: cache-inhibit and guarded */ 588 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_VSC7385_BASE | BATL_PP_10 | \ 589 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 590 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP) 591 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 592 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 593 594 /* FLASH: icache cacheable, but dcache-inhibit and guarded */ 595 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 596 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) 597 #define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ 598 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 599 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 600 601 /* Stack in dcache: cacheable, no memory coherence */ 602 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) 603 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 604 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 605 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 606 607 #ifdef CONFIG_PCI 608 /* PCI MEM space: cacheable */ 609 #define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) 610 #define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) 611 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 612 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 613 /* PCI MMIO space: cache-inhibit and guarded */ 614 #define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \ 615 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 616 #define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) 617 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 618 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 619 #else 620 #define CONFIG_SYS_IBAT6L (0) 621 #define CONFIG_SYS_IBAT6U (0) 622 #define CONFIG_SYS_IBAT7L (0) 623 #define CONFIG_SYS_IBAT7U (0) 624 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 625 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 626 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 627 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 628 #endif 629 630 /* 631 * Internal Definitions 632 * 633 * Boot Flags 634 */ 635 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 636 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 637 638 #if defined(CONFIG_CMD_KGDB) 639 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 640 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 641 #endif 642 643 /* 644 * Environment Configuration 645 */ 646 #define CONFIG_ENV_OVERWRITE 647 648 #define CONFIG_HAS_FSL_DR_USB 649 650 #define CONFIG_NETDEV eth1 651 652 #define CONFIG_HOSTNAME mpc837x_rdb 653 #define CONFIG_ROOTPATH /nfsroot 654 #define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot 655 #define CONFIG_BOOTFILE uImage 656 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 657 #define CONFIG_FDTFILE mpc8379_rdb.dtb 658 659 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 660 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 661 #define CONFIG_BAUDRATE 115200 662 663 #define XMK_STR(x) #x 664 #define MK_STR(x) XMK_STR(x) 665 666 #define CONFIG_EXTRA_ENV_SETTINGS \ 667 "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ 668 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 669 "tftpflash=tftp $loadaddr $uboot;" \ 670 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 671 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 672 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 673 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 674 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 675 "fdtaddr=780000\0" \ 676 "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \ 677 "ramdiskaddr=1000000\0" \ 678 "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \ 679 "console=ttyS0\0" \ 680 "setbootargs=setenv bootargs " \ 681 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ 682 "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ 683 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 684 "root=$rootdev rw console=$console,$baudrate $othbootargs\0" 685 686 #define CONFIG_NFSBOOTCOMMAND \ 687 "setenv rootdev /dev/nfs;" \ 688 "run setbootargs;" \ 689 "run setipargs;" \ 690 "tftp $loadaddr $bootfile;" \ 691 "tftp $fdtaddr $fdtfile;" \ 692 "bootm $loadaddr - $fdtaddr" 693 694 #define CONFIG_RAMBOOTCOMMAND \ 695 "setenv rootdev /dev/ram;" \ 696 "run setbootargs;" \ 697 "tftp $ramdiskaddr $ramdiskfile;" \ 698 "tftp $loadaddr $bootfile;" \ 699 "tftp $fdtaddr $fdtfile;" \ 700 "bootm $loadaddr $ramdiskaddr $fdtaddr" 701 702 #undef MK_STR 703 #undef XMK_STR 704 705 #endif /* __CONFIG_H */ 706