1 /*
2  * Copyright (C) 2007 Freescale Semiconductor, Inc.
3  * Kevin Lam <kevin.lam@freescale.com>
4  * Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation; either version 2 of
9  * the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
19  * MA 02111-1307 USA
20  */
21 
22 #ifndef __CONFIG_H
23 #define __CONFIG_H
24 
25 /*
26  * High Level Configuration Options
27  */
28 #define CONFIG_E300		1 /* E300 family */
29 #define CONFIG_MPC83xx		1 /* MPC83xx family */
30 #define CONFIG_MPC837x		1 /* MPC837x CPU specific */
31 #define CONFIG_MPC837XERDB	1
32 
33 #define	CONFIG_SYS_TEXT_BASE	0xFE000000
34 
35 #define CONFIG_PCI	1
36 
37 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_MISC_INIT_R
39 #define CONFIG_HWCONFIG
40 
41 /*
42  * On-board devices
43  */
44 #define CONFIG_TSEC_ENET		/* TSEC Ethernet support */
45 #define CONFIG_VSC7385_ENET
46 
47 /*
48  * System Clock Setup
49  */
50 #ifdef CONFIG_PCISLAVE
51 #define CONFIG_83XX_PCICLK	66666667 /* in HZ */
52 #else
53 #define CONFIG_83XX_CLKIN	66666667 /* in Hz */
54 #define CONFIG_PCIE
55 #endif
56 
57 #ifndef CONFIG_SYS_CLK_FREQ
58 #define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
59 #endif
60 
61 /*
62  * Hardware Reset Configuration Word
63  */
64 #define CONFIG_SYS_HRCW_LOW (\
65 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
66 	HRCWL_DDR_TO_SCB_CLK_1X1 |\
67 	HRCWL_SVCOD_DIV_2 |\
68 	HRCWL_CSB_TO_CLKIN_5X1 |\
69 	HRCWL_CORE_TO_CSB_2X1)
70 
71 #ifdef CONFIG_PCISLAVE
72 #define CONFIG_SYS_HRCW_HIGH (\
73 	HRCWH_PCI_AGENT |\
74 	HRCWH_PCI1_ARBITER_DISABLE |\
75 	HRCWH_CORE_ENABLE |\
76 	HRCWH_FROM_0XFFF00100 |\
77 	HRCWH_BOOTSEQ_DISABLE |\
78 	HRCWH_SW_WATCHDOG_DISABLE |\
79 	HRCWH_ROM_LOC_LOCAL_16BIT |\
80 	HRCWH_RL_EXT_LEGACY |\
81 	HRCWH_TSEC1M_IN_RGMII |\
82 	HRCWH_TSEC2M_IN_RGMII |\
83 	HRCWH_BIG_ENDIAN |\
84 	HRCWH_LDP_CLEAR)
85 #else
86 #define CONFIG_SYS_HRCW_HIGH (\
87 	HRCWH_PCI_HOST |\
88 	HRCWH_PCI1_ARBITER_ENABLE |\
89 	HRCWH_CORE_ENABLE |\
90 	HRCWH_FROM_0X00000100 |\
91 	HRCWH_BOOTSEQ_DISABLE |\
92 	HRCWH_SW_WATCHDOG_DISABLE |\
93 	HRCWH_ROM_LOC_LOCAL_16BIT |\
94 	HRCWH_RL_EXT_LEGACY |\
95 	HRCWH_TSEC1M_IN_RGMII |\
96 	HRCWH_TSEC2M_IN_RGMII |\
97 	HRCWH_BIG_ENDIAN |\
98 	HRCWH_LDP_CLEAR)
99 #endif
100 
101 /* System performance - define the value i.e. CONFIG_SYS_XXX
102 */
103 
104 /* Arbiter Configuration Register */
105 #define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
106 #define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
107 
108 /* System Priority Control Regsiter */
109 #define CONFIG_SYS_SPCR_TSECEP		3	/* eTSEC1&2 emergency priority (0-3) */
110 
111 /* System Clock Configuration Register */
112 #define CONFIG_SYS_SCCR_TSEC1CM	1		/* eTSEC1 clock mode (0-3) */
113 #define CONFIG_SYS_SCCR_TSEC2CM	1		/* eTSEC2 clock mode (0-3) */
114 #define CONFIG_SYS_SCCR_SATACM		SCCR_SATACM_2	/* SATA1-4 clock mode (0-3) */
115 
116 /*
117  * System IO Config
118  */
119 #define CONFIG_SYS_SICRH		0x08200000
120 #define CONFIG_SYS_SICRL		0x00000000
121 
122 /*
123  * Output Buffer Impedance
124  */
125 #define CONFIG_SYS_OBIR		0x30100000
126 
127 /*
128  * IMMR new address
129  */
130 #define CONFIG_SYS_IMMR		0xE0000000
131 
132 /*
133  * Device configurations
134  */
135 
136 /* Vitesse 7385 */
137 
138 #ifdef CONFIG_VSC7385_ENET
139 
140 #define CONFIG_TSEC2
141 
142 /* The flash address and size of the VSC7385 firmware image */
143 #define CONFIG_VSC7385_IMAGE		0xFE7FE000
144 #define CONFIG_VSC7385_IMAGE_SIZE	8192
145 
146 #endif
147 
148 /*
149  * DDR Setup
150  */
151 #define CONFIG_SYS_DDR_BASE		0x00000000 /* DDR is system memory */
152 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
153 #define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
154 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	0x03000000
155 #define CONFIG_SYS_83XX_DDR_USES_CS0
156 
157 #define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN)
158 
159 #undef CONFIG_DDR_ECC		/* support DDR ECC function */
160 #undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
161 
162 #undef CONFIG_NEVER_ASSERT_ODT_TO_CPU	/* Never assert ODT to internal IOs */
163 
164 /*
165  * Manually set up DDR parameters
166  */
167 #define CONFIG_SYS_DDR_SIZE		256		/* MB */
168 #define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f
169 #define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ODT_WR_ACS \
170 				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
171 
172 #define CONFIG_SYS_DDR_TIMING_3	0x00000000
173 #define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
174 				| (0 << TIMING_CFG0_WRT_SHIFT) \
175 				| (0 << TIMING_CFG0_RRT_SHIFT) \
176 				| (0 << TIMING_CFG0_WWT_SHIFT) \
177 				| (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
178 				| (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
179 				| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
180 				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
181 				/* 0x00220802 */
182 				/* 0x00260802 */ /* DDR400 */
183 #define CONFIG_SYS_DDR_TIMING_1	((3 << TIMING_CFG1_PRETOACT_SHIFT) \
184 				| (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
185 				| (3 << TIMING_CFG1_ACTTORW_SHIFT) \
186 				| (7 << TIMING_CFG1_CASLAT_SHIFT) \
187 				| (13 << TIMING_CFG1_REFREC_SHIFT) \
188 				| (3 << TIMING_CFG1_WRREC_SHIFT) \
189 				| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
190 				| (2 << TIMING_CFG1_WRTORD_SHIFT))
191 				/* 0x3935d322 */
192 				/* 0x3937d322 */
193 #define CONFIG_SYS_DDR_TIMING_2	0x02984cc8
194 
195 #define CONFIG_SYS_DDR_INTERVAL	((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \
196 				| (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
197 				/* 0x06090100 */
198 
199 #if defined(CONFIG_DDR_2T_TIMING)
200 #define CONFIG_SYS_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
201 				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT \
202 				| SDRAM_CFG_2T_EN \
203 				| SDRAM_CFG_DBW_32)
204 #else
205 #define CONFIG_SYS_DDR_SDRAM_CFG		(SDRAM_CFG_SREN \
206 				| 3 << SDRAM_CFG_SDRAM_TYPE_SHIFT)
207 				/* 0x43000000 */
208 #endif
209 #define CONFIG_SYS_DDR_SDRAM_CFG2	0x00001000 /* 1 posted refresh */
210 #define CONFIG_SYS_DDR_MODE		((0x0406 << SDRAM_MODE_ESD_SHIFT) \
211 				| (0x0442 << SDRAM_MODE_SD_SHIFT))
212 				/* 0x04400442 */ /* DDR400 */
213 #define CONFIG_SYS_DDR_MODE2		0x00000000
214 
215 /*
216  * Memory test
217  */
218 #undef CONFIG_SYS_DRAM_TEST		/* memory test, takes time */
219 #define CONFIG_SYS_MEMTEST_START	0x00040000 /* memtest region */
220 #define CONFIG_SYS_MEMTEST_END		0x0ef70010
221 
222 /*
223  * The reserved memory
224  */
225 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
226 
227 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
228 #define CONFIG_SYS_RAMBOOT
229 #else
230 #undef	CONFIG_SYS_RAMBOOT
231 #endif
232 
233 #define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
234 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
235 
236 /*
237  * Initial RAM Base Address Setup
238  */
239 #define CONFIG_SYS_INIT_RAM_LOCK	1
240 #define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
241 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
242 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
243 
244 /*
245  * Local Bus Configuration & Clock Setup
246  */
247 #define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
248 #define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
249 #define CONFIG_SYS_LBC_LBCR		0x00000000
250 #define CONFIG_FSL_ELBC		1
251 
252 /*
253  * FLASH on the Local Bus
254  */
255 #define CONFIG_SYS_FLASH_CFI		/* use the Common Flash Interface */
256 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
257 #define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
258 #define CONFIG_SYS_FLASH_SIZE		8 /* max FLASH size is 32M */
259 
260 #define CONFIG_SYS_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
261 #define CONFIG_SYS_FLASH_EMPTY_INFO			/* display empty sectors */
262 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
263 
264 #define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE /* Window base at flash base */
265 #define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
266 
267 #define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | /* Flash Base address */ \
268 				(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
269 				BR_V) /* valid */
270 #define CONFIG_SYS_OR0_PRELIM		(0xFF800000		/* 8 MByte */ \
271 				| OR_GPCM_XACS \
272 				| OR_GPCM_SCY_9 \
273 				| OR_GPCM_EHTR \
274 				| OR_GPCM_EAD)
275 				/* 0xFF806FF7	TODO SLOW 8 MB flash size */
276 
277 #define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
278 #define CONFIG_SYS_MAX_FLASH_SECT	256 /* max sectors per device */
279 
280 #undef	CONFIG_SYS_FLASH_CHECKSUM
281 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
282 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
283 
284 /*
285  * NAND Flash on the Local Bus
286  */
287 #define CONFIG_SYS_NAND_BASE		0xE0600000	/* 0xE0600000 */
288 #define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_NAND_BASE | \
289 				 (2 << BR_DECC_SHIFT) |	/* Use HW ECC */ \
290 				 BR_PS_8 |		/* Port Size = 8 bit */ \
291 				 BR_MS_FCM |		/* MSEL = FCM */ \
292 				 BR_V)			/* valid */
293 #define CONFIG_SYS_OR1_PRELIM		(0xFFFF8000 |		/* length 32K */ \
294 				 OR_FCM_CSCT | \
295 				 OR_FCM_CST | \
296 				 OR_FCM_CHT | \
297 				 OR_FCM_SCY_1 | \
298 				 OR_FCM_TRLX | \
299 				 OR_FCM_EHTR)
300 #define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
301 #define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E	/* 32KB  */
302 
303 /* Vitesse 7385 */
304 
305 #define CONFIG_SYS_VSC7385_BASE	0xF0000000
306 
307 #ifdef CONFIG_VSC7385_ENET
308 
309 #define CONFIG_SYS_BR2_PRELIM		0xf0000801		/* Base address */
310 #define CONFIG_SYS_OR2_PRELIM		0xfffe09ff		/* 128K bytes*/
311 #define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_VSC7385_BASE	/* Access Base */
312 #define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010		/* Access Size 128K */
313 
314 #endif
315 
316 /*
317  * Serial Port
318  */
319 #define CONFIG_CONS_INDEX	1
320 #define CONFIG_SYS_NS16550
321 #define CONFIG_SYS_NS16550_SERIAL
322 #define CONFIG_SYS_NS16550_REG_SIZE	1
323 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
324 
325 #define CONFIG_SYS_BAUDRATE_TABLE \
326 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
327 
328 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR+0x4500)
329 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR+0x4600)
330 
331 /* SERDES */
332 #define CONFIG_FSL_SERDES
333 #define CONFIG_FSL_SERDES1	0xe3000
334 #define CONFIG_FSL_SERDES2	0xe3100
335 
336 /* Use the HUSH parser */
337 #define CONFIG_SYS_HUSH_PARSER
338 #ifdef	CONFIG_SYS_HUSH_PARSER
339 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
340 #endif
341 
342 /* Pass open firmware flat tree */
343 #define CONFIG_OF_LIBFDT	1
344 #define CONFIG_OF_BOARD_SETUP	1
345 #define CONFIG_OF_STDOUT_VIA_ALIAS 1
346 
347 /* I2C */
348 #define CONFIG_HARD_I2C		/* I2C with hardware support */
349 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
350 #define CONFIG_FSL_I2C
351 #define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
352 #define CONFIG_SYS_I2C_SLAVE		0x7F
353 #define CONFIG_SYS_I2C_NOPROBES	{0x51} /* Don't probe these addrs */
354 #define CONFIG_SYS_I2C_OFFSET		0x3000
355 #define CONFIG_SYS_I2C2_OFFSET		0x3100
356 
357 /*
358  * Config on-board RTC
359  */
360 #define CONFIG_RTC_DS1374	/* use ds1374 rtc via i2c */
361 #define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
362 
363 /*
364  * General PCI
365  * Addresses are mapped 1-1.
366  */
367 #define CONFIG_SYS_PCI_MEM_BASE	0x80000000
368 #define CONFIG_SYS_PCI_MEM_PHYS	CONFIG_SYS_PCI_MEM_BASE
369 #define CONFIG_SYS_PCI_MEM_SIZE	0x10000000 /* 256M */
370 #define CONFIG_SYS_PCI_MMIO_BASE	0x90000000
371 #define CONFIG_SYS_PCI_MMIO_PHYS	CONFIG_SYS_PCI_MMIO_BASE
372 #define CONFIG_SYS_PCI_MMIO_SIZE	0x10000000 /* 256M */
373 #define CONFIG_SYS_PCI_IO_BASE		0x00000000
374 #define CONFIG_SYS_PCI_IO_PHYS		0xE0300000
375 #define CONFIG_SYS_PCI_IO_SIZE		0x100000 /* 1M */
376 
377 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE
378 #define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
379 #define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
380 
381 #define CONFIG_SYS_PCIE1_BASE		0xA0000000
382 #define CONFIG_SYS_PCIE1_CFG_BASE	0xA0000000
383 #define CONFIG_SYS_PCIE1_CFG_SIZE	0x08000000
384 #define CONFIG_SYS_PCIE1_MEM_BASE	0xA8000000
385 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xA8000000
386 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
387 #define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
388 #define CONFIG_SYS_PCIE1_IO_PHYS	0xB8000000
389 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000
390 
391 #define CONFIG_SYS_PCIE2_BASE		0xC0000000
392 #define CONFIG_SYS_PCIE2_CFG_BASE	0xC0000000
393 #define CONFIG_SYS_PCIE2_CFG_SIZE	0x08000000
394 #define CONFIG_SYS_PCIE2_MEM_BASE	0xC8000000
395 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xC8000000
396 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000
397 #define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
398 #define CONFIG_SYS_PCIE2_IO_PHYS	0xD8000000
399 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
400 
401 #ifdef CONFIG_PCI
402 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
403 
404 #undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
405 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
406 #endif	/* CONFIG_PCI */
407 
408 /*
409  * TSEC
410  */
411 #ifdef CONFIG_TSEC_ENET
412 
413 #define CONFIG_GMII			/* MII PHY management */
414 
415 #define CONFIG_TSEC1
416 
417 #ifdef CONFIG_TSEC1
418 #define CONFIG_HAS_ETH0
419 #define CONFIG_TSEC1_NAME		"TSEC0"
420 #define CONFIG_SYS_TSEC1_OFFSET		0x24000
421 #define TSEC1_PHY_ADDR			2
422 #define TSEC1_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
423 #define TSEC1_PHYIDX			0
424 #endif
425 
426 #ifdef CONFIG_TSEC2
427 #define CONFIG_HAS_ETH1
428 #define CONFIG_TSEC2_NAME		"TSEC1"
429 #define CONFIG_SYS_TSEC2_OFFSET		0x25000
430 #define TSEC2_PHY_ADDR			0x1c
431 #define TSEC2_FLAGS			(TSEC_GIGABIT | TSEC_REDUCED)
432 #define TSEC2_PHYIDX			0
433 #endif
434 
435 /* Options are: TSEC[0-1] */
436 #define CONFIG_ETHPRIME			"TSEC0"
437 
438 #endif
439 
440 /*
441  * SATA
442  */
443 #define CONFIG_LIBATA
444 #define CONFIG_FSL_SATA
445 
446 #define CONFIG_SYS_SATA_MAX_DEVICE	2
447 #define CONFIG_SATA1
448 #define CONFIG_SYS_SATA1_OFFSET	0x18000
449 #define CONFIG_SYS_SATA1		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
450 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
451 #define CONFIG_SATA2
452 #define CONFIG_SYS_SATA2_OFFSET	0x19000
453 #define CONFIG_SYS_SATA2		(CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET)
454 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
455 
456 #ifdef CONFIG_FSL_SATA
457 #define CONFIG_LBA48
458 #define CONFIG_CMD_SATA
459 #define CONFIG_DOS_PARTITION
460 #define CONFIG_CMD_EXT2
461 #endif
462 
463 /*
464  * Environment
465  */
466 #ifndef CONFIG_SYS_RAMBOOT
467 	#define CONFIG_ENV_IS_IN_FLASH	1
468 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
469 	#define CONFIG_ENV_SECT_SIZE	0x10000	/* 64K (one sector) for env */
470 	#define CONFIG_ENV_SIZE		0x4000
471 #else
472 	#define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now */
473 	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
474 	#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-0x1000)
475 	#define CONFIG_ENV_SIZE		0x2000
476 #endif
477 
478 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
479 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
480 
481 /*
482  * BOOTP options
483  */
484 #define CONFIG_BOOTP_BOOTFILESIZE
485 #define CONFIG_BOOTP_BOOTPATH
486 #define CONFIG_BOOTP_GATEWAY
487 #define CONFIG_BOOTP_HOSTNAME
488 
489 
490 /*
491  * Command line configuration.
492  */
493 #include <config_cmd_default.h>
494 
495 #define CONFIG_CMD_PING
496 #define CONFIG_CMD_I2C
497 #define CONFIG_CMD_MII
498 #define CONFIG_CMD_DATE
499 
500 #if defined(CONFIG_PCI)
501 #define CONFIG_CMD_PCI
502 #endif
503 
504 #if defined(CONFIG_SYS_RAMBOOT)
505 #undef CONFIG_CMD_SAVEENV
506 #undef CONFIG_CMD_LOADS
507 #endif
508 
509 #define CONFIG_CMDLINE_EDITING	1	/* add command line history */
510 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
511 
512 #undef CONFIG_WATCHDOG		/* watchdog disabled */
513 
514 #define CONFIG_MMC     1
515 
516 #ifdef CONFIG_MMC
517 #define CONFIG_FSL_ESDHC
518 #define CONFIG_FSL_ESDHC_PIN_MUX
519 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
520 #define CONFIG_CMD_MMC
521 #define CONFIG_GENERIC_MMC
522 #define CONFIG_CMD_EXT2
523 #define CONFIG_CMD_FAT
524 #define CONFIG_DOS_PARTITION
525 #endif
526 
527 /*
528  * Miscellaneous configurable options
529  */
530 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
531 #define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
532 #define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
533 
534 #if defined(CONFIG_CMD_KGDB)
535 	#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
536 #else
537 	#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
538 #endif
539 
540 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
541 #define CONFIG_SYS_MAXARGS	16		/* max number of command args */
542 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
543 #define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
544 
545 /*
546  * For booting Linux, the board info and command line data
547  * have to be in the first 256 MB of memory, since this is
548  * the maximum mapped by the Linux kernel during initialization.
549  */
550 #define CONFIG_SYS_BOOTMAPSZ		(256 << 20) /* Initial Memory map for Linux */
551 
552 /*
553  * Core HID Setup
554  */
555 #define CONFIG_SYS_HID0_INIT	0x000000000
556 #define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
557 				 HID0_ENABLE_INSTRUCTION_CACHE)
558 #define CONFIG_SYS_HID2		HID2_HBE
559 
560 /*
561  * MMU Setup
562  */
563 
564 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
565 
566 /* DDR: cache cacheable */
567 #define CONFIG_SYS_SDRAM_LOWER		CONFIG_SYS_SDRAM_BASE
568 #define CONFIG_SYS_SDRAM_UPPER		(CONFIG_SYS_SDRAM_BASE + 0x10000000)
569 
570 #define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
571 #define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
572 #define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
573 #define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
574 
575 #define CONFIG_SYS_IBAT1L	(CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
576 #define CONFIG_SYS_IBAT1U	(CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
577 #define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
578 #define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
579 
580 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
581 #define CONFIG_SYS_IBAT2L	(CONFIG_SYS_IMMR | BATL_PP_10 | \
582 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
583 #define CONFIG_SYS_IBAT2U	(CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
584 #define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
585 #define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
586 
587 /* L2 Switch: cache-inhibit and guarded */
588 #define CONFIG_SYS_IBAT3L	(CONFIG_SYS_VSC7385_BASE | BATL_PP_10 | \
589 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
590 #define CONFIG_SYS_IBAT3U	(CONFIG_SYS_VSC7385_BASE | BATU_BL_128K | BATU_VS | BATU_VP)
591 #define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
592 #define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
593 
594 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
595 #define CONFIG_SYS_IBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
596 #define CONFIG_SYS_IBAT4U	(CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
597 #define CONFIG_SYS_DBAT4L	(CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
598 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
599 #define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
600 
601 /* Stack in dcache: cacheable, no memory coherence */
602 #define CONFIG_SYS_IBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
603 #define CONFIG_SYS_IBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
604 #define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
605 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
606 
607 #ifdef CONFIG_PCI
608 /* PCI MEM space: cacheable */
609 #define CONFIG_SYS_IBAT6L	(CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
610 #define CONFIG_SYS_IBAT6U	(CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
611 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
612 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
613 /* PCI MMIO space: cache-inhibit and guarded */
614 #define CONFIG_SYS_IBAT7L	(CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \
615 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
616 #define CONFIG_SYS_IBAT7U	(CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
617 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
618 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
619 #else
620 #define CONFIG_SYS_IBAT6L	(0)
621 #define CONFIG_SYS_IBAT6U	(0)
622 #define CONFIG_SYS_IBAT7L	(0)
623 #define CONFIG_SYS_IBAT7U	(0)
624 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
625 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
626 #define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
627 #define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
628 #endif
629 
630 #if defined(CONFIG_CMD_KGDB)
631 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
632 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
633 #endif
634 
635 /*
636  * Environment Configuration
637  */
638 #define CONFIG_ENV_OVERWRITE
639 
640 #define CONFIG_HAS_FSL_DR_USB
641 
642 #define CONFIG_NETDEV		eth1
643 
644 #define CONFIG_HOSTNAME		mpc837x_rdb
645 #define CONFIG_ROOTPATH		"/nfsroot"
646 #define CONFIG_RAMDISKFILE	rootfs.ext2.gz.uboot
647 #define CONFIG_BOOTFILE		"uImage"
648 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
649 #define CONFIG_FDTFILE		mpc8379_rdb.dtb
650 
651 #define CONFIG_LOADADDR		800000	/* default location for tftp and bootm */
652 #define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
653 #define CONFIG_BAUDRATE		115200
654 
655 #define XMK_STR(x)	#x
656 #define MK_STR(x)	XMK_STR(x)
657 
658 #define CONFIG_EXTRA_ENV_SETTINGS \
659 	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
660 	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
661 	"tftpflash=tftp $loadaddr $uboot;"				\
662 		"protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "	\
663 		"erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
664 		"cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "	\
665 		"protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "		\
666 		"cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"	\
667 	"fdtaddr=780000\0"						\
668 	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
669 	"ramdiskaddr=1000000\0"						\
670 	"ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0"			\
671 	"console=ttyS0\0"						\
672 	"setbootargs=setenv bootargs "					\
673 		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
674 	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	\
675 		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
676 		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
677 
678 #define CONFIG_NFSBOOTCOMMAND						\
679 	"setenv rootdev /dev/nfs;"					\
680 	"run setbootargs;"						\
681 	"run setipargs;"						\
682 	"tftp $loadaddr $bootfile;"					\
683 	"tftp $fdtaddr $fdtfile;"					\
684 	"bootm $loadaddr - $fdtaddr"
685 
686 #define CONFIG_RAMBOOTCOMMAND						\
687 	"setenv rootdev /dev/ram;"					\
688 	"run setbootargs;"						\
689 	"tftp $ramdiskaddr $ramdiskfile;"				\
690 	"tftp $loadaddr $bootfile;"					\
691 	"tftp $fdtaddr $fdtfile;"					\
692 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
693 
694 #undef MK_STR
695 #undef XMK_STR
696 
697 #endif	/* __CONFIG_H */
698